* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function
  debug_core,kdb: fix kgdb_connected bit set in the wrong place
  Fix merge regression from external kdb to upstream kdb
  repair gdbstub to match the gdbserial protocol specification
  kdb: break out of kdb_ll() when command is terminated

Fix the security problem in the CIFS filesystem DNS lookup code in which a
malicious redirect could be installed by a random user by simply adding a
result record into one of their keyrings with add_key() and then invoking a
CIFS CFS lookup [CVE-2010-2524].

This is done by creating an internal keyring specifically for the caching of
DNS lookups.  To enforce the use of this keyring, the module init routine
creates a set of override credentials with the keyring installed as the thread
keyring and instructs request_key() to only install lookup result keys in that
keyring.

The override is then applied around the call to request_key().

This has some additional benefits when a kernel service uses this module to
request a key:

 (1) The result keys are owned by root, not the user that caused the lookup.

 (2) The result keys don't pop up in the user's keyrings.

 (3) The result keys don't come out of the quota of the user that caused the
     lookup.

The keyring can be viewed as root by doing cat /proc/keys:

2a0ca6c3 I-----     1 perm 1f030000     0     0 keyring   .dns_resolver: 1/4

It can then be listed with 'keyctl list' by root.

	# keyctl list 0x2a0ca6c3
	1 key in keyring:
	726766307: --alswrv     0     0 dns_resolver: foo.bar.com
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NSteve French <smfrench@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kdb code should not toggle the sysrq state in case an end user
wants to try and resume the normal kernel execution.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Immediately following an exit from the kdb shell the kgdb_connected
variable should be set to zero, unless there are breakpoints planted.
If the kgdb_connected variable is not zeroed out with kdb, it is
impossible to turn off kdb.

This patch is merely a work around for now, the real fix will check
for the breakpoints.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

In the process of merging kdb to the mainline, the kdb lsmod command
stopped printing the base load address of kernel modules.  This is
needed for using kdb in conjunction with external tools such as gdb.

Simply restore the functionality by adding a kdb_printf for the base
load address of the kernel modules.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

The gdbserial protocol handler should return an empty packet instead
of an error string when ever it responds to a command it does not
implement.

The problem cases come from a debugger client sending
qTBuffer, qTStatus, qSearch, qSupported.

The incorrect response from the gdbstub leads the debugger clients to
not function correctly.  Recent versions of gdb will not detach correctly as a result of this behavior.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com>

Without this patch the "ll" linked-list traversal command won't
terminate when you hit q/Q.
Signed-off-by: NMartin Hicks <mort@sgi.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix 'driver ... did not release config properly' warning

* 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev:
  mm: add context argument to shrinker callback to remaining shrinkers

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Select wm_hubs automatically for WM8994
  ASoC: Remove duplicate AUX definition from WM8776
  ASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_register
  ASoC: wm8727: add a missing return in wm8727_platform_probe
  ASoC: fsi: fixup wrong value setting order of TDM
  ASoC: fsi: fixup clock inversion operation

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  math-emu: correct test for downshifting fraction in _FP_FROM_INT()
  perf: Add DWARF register lookup for sparc
  MAINTAINERS: Add SBUS driver path to sparc entry.
  drivers/sbus: Remove unnecessary casts of private_data
  sparc: remove homegrown L1_CACHE_ALIGN macro
  sparc64: fix the build error due to smp_kgdb_capture_client()
  sparc64: Fix maybe_change_configuration() PCR setting.
  arch/sparc/kernel: Eliminate what looks like a NULL pointer dereference
  sparc64: Update defconfig.
  sunsu: Fix use after free in su_remove().
  sunserial: Don't call add_preferred_console() when console= is specified.
  sparc32: Kill none_mask, it's bogus.

Pointed out by Lucas who found the new one in a comment in
setup_percpu.c. And then I fixed the others that I grepped
for.
Reported-by: NLucas <canolucas@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Up to 2.6.34 pcmcia_release_irq() reset p_dev->_irq to 0 after releasing
the irq.  The IRQ is now released in pcmcia_disable_device(), however
p_dev->_irq is not reset, triggering a warning in pcmcia_device_remove().
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Add the shrinkers missed in the first conversion of the API in
commit 7f8275d0 ("mm: add context argument to
shrinker callback").
Signed-off-by: NDave Chinner <dchinner@redhat.com>

The kernel's math-emu code contains a macro _FP_FROM_INT() which is
used to convert an integer to a raw normalized floating-point value.
It does this basically in three steps:

1. Compute the exponent from the number of leading zero bits.
2. Downshift large fractions to put the MSB in the right position
   for normalized fractions.
3. Upshift small fractions to put the MSB in the right position.

There is an boundary error in step 2, causing a fraction with its
MSB exactly one bit above the normalized MSB position to not be
downshifted.  This results in a non-normalized raw float, which when
packed becomes a massively inaccurate representation for that input.

The impact of this depends on a number of arch-specific factors,
but it is known to have broken emulation of FXTOD instructions
on UltraSPARC III, which was originally reported as GCC bug 44631
<http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44631>.

Any arch which uses math-emu to emulate conversions from integers to
same-size floats may be affected.

The fix is simple: the exponent comparison used to determine if the
fraction should be downshifted must be "<=" not "<".

I'm sending a kernel module to test this as a reply to this message.
There are also SPARC user-space test cases in the GCC bug entry.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/r600: fix possible NULL pointer derefernce
  drm/radeon/kms: add quirk for ASUS HD 3600 board
  include/linux/vgaarb.h: add missing part of include guard
  drm/nouveau: Fix crashes during fbcon init on single head cards.
  drm/nouveau: fix pcirom vbios shadow breakage from acpi rom patch
  drm/radeon/kms: fix shared ddc harder
  drm/i915: enable low power render writes on GEN3 hardware.
  drm/i915: Define MI_ARB_STATE bits
  vmwgfx: return -EFAULT if copy_to_user fails
  fb: handle allocation failure in alloc_apertures()
  drm: radeon: check kzalloc() result
  drm/ttm: Fix build on architectures without AGP
  drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics
  drm/radeon/kms: fix possible mis-detection of sideport on rs690/rs740
  drm/radeon/kms: fix legacy tv-out pal mode

Reported-by: NAlexander Y. Fomichev <git.user@gmail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Connector is actually DVI rather than HDMI.
Reported-by: NtrapDoor <trapdoor6@gmail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

vgaarb.h was missing the #define of the #ifndef at the top for the guard
to prevent multiple #include's from causing re-define errors
Signed-off-by: NDoug Goldstein <cardoe@gentoo.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: do not include cap/dentry releases in replayed messages
  ceph: reuse request message when replaying against recovering mds
  ceph: fix creation of ipv6 sockets
  ceph: fix parsing of ipv6 addresses
  ceph: fix printing of ipv6 addrs
  ceph: add kfree() to error path
  ceph: fix leak of mon authorizer
  ceph: fix message revocation

* 'linuxdocs' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
  documentation: fix almost duplicate filenames (IO/io-mapping.txt)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits)
  bridge: Partially disable netpoll support
  tcp: fix crash in tcp_xmit_retransmit_queue
  IPv6: fix CoA check in RH2 input handler (mip6_rthdr_input())
  ibmveth: lost IRQ while closing/opening device leads to service loss
  rt2x00: Fix lockdep warning in rt2x00lib_probe_dev()
  vhost: avoid pr_err on condition guest can trigger
  ipmr: Don't leak memory if fib lookup fails.
  vhost-net: avoid flush under lock
  net: fix problem in reading sock TX queue
  net/core: neighbour update Oops
  net: skb_tx_hash() fix relative to skb_orphan_try()
  rfs: call sock_rps_record_flow() in tcp_splice_read()
  xfrm: do not assume that template resolving always returns xfrms
  hostap_pci: set dev->base_addr during probe
  axnet_cs: use spin_lock_irqsave in ax_interrupt
  dsa: Fix Kconfig dependencies.
  act_nat: not all of the ICMP packets need an IP header payload
  r8169: incorrect identifier for a 8168dp
  Phonet: fix skb leak in pipe endpoint accept()
  Bluetooth: Update sec_level/auth_type for already existing connections
  ...

If a single-threaded process does a file-descriptor operation, and some
other process accesses that same file descriptor via /proc, the current
rcu_dereference_check_fdtable() can give a false-positive RCU-lockdep
splat due to the reference count being increased by the /proc access after
the reference-count check in fget_light() but before the check in
rcu_dereference_check_fdtable().

This commit prevents this false positive by checking for a single-threaded
process.  To avoid #include hell, this commit uses the wrapper for
thread_group_empty(current) defined by rcu_my_thread_group_empty()
provided in a separate commit.
Located-by: NMiles Lane <miles.lane@gmail.com>
Located-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

System will crash sooner or later once the memory with the code of the
s3c-sdhci.ko module is reused for something else. I really have no idea
how the lack of remove function went unnoticed into the mainline code.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

My Collabora address is no longer enabled - update the MODULE_AUTHOR
fields of drivers to my current email address.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Borislav Petkov reported his 32bit numa system has problem:

[    0.000000] Reserving total of 4c00 pages for numa KVA remap
[    0.000000] kva_start_pfn ~ 32800 max_low_pfn ~ 375fe
[    0.000000] max_pfn = 238000
[    0.000000] 8202MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] alloc (nid=8 100000 - 7ee00000) (1000000 - ffffffff) 1000 1000 => 34e7000
[    0.000000] alloc (nid=8 100000 - 7ee00000) (1000000 - ffffffff) 200 40 => 34c9d80
[    0.000000] alloc (nid=0 100000 - 7ee00000) (1000000 - ffffffffffffffff) 180 40 => 34e6140
[    0.000000] alloc (nid=1 80000000 - c7e60000) (1000000 - ffffffffffffffff) 240 40 => 80000000
[    0.000000] BUG: unable to handle kernel paging request at 40000000
[    0.000000] IP: [<c2c8cff1>] __alloc_memory_core_early+0x147/0x1d6
[    0.000000] *pdpt = 0000000000000000 *pde = f000ff53f000ff00
...
[    0.000000] Call Trace:
[    0.000000]  [<c2c8b4f8>] ? __alloc_bootmem_node+0x216/0x22f
[    0.000000]  [<c2c90c9b>] ? sparse_early_usemaps_alloc_node+0x5a/0x10b
[    0.000000]  [<c2c9149e>] ? sparse_init+0x1dc/0x499
[    0.000000]  [<c2c79118>] ? paging_init+0x168/0x1df
[    0.000000]  [<c2c780ff>] ? native_pagetable_setup_start+0xef/0x1bb

looks like it allocates too much high address for bootmem.

Try to cut limit with get_max_mapped()
Reported-by: NBorislav Petkov <borislav.petkov@amd.com>
Tested-by: NConny Seidel <conny.seidel@amd.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: <stable@kernel.org>		[2.6.34.x]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit e534c7c5 ("numa: x86_64: use generic percpu var
numa_node_id() implementation") broke numa systems that don't have ram
on node0 when MEMORY_HOTPLUG is enabled, because cpu_up() will call
cpu_to_node() before per_cpu(numa_node) is setup for APs.

When Node0 doesn't have RAM, on x86, cpus already round it to nearest
node with RAM in x86_cpu_to_node_map.  and per_cpu(numa_node) is not set
up until in c_init for APs.

When later cpu_up() calling cpu_to_node() will get 0 again, and make it
online even there is no RAM on node0.  so later all APs can not booted up,
and later will have panic.

[    1.611101] On node 0 totalpages: 0
.........
[    2.608558] On node 0 totalpages: 0
[    2.612065] Brought up 1 CPUs
[    2.615199] Total of 1 processors activated (3990.31 BogoMIPS).
...
   93.225341] calling  loop_init+0x0/0x1a4 @ 1
[   93.229314] PERCPU: allocation failed, size=80 align=8, failed to populate
[   93.246539] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc4-tip-yh-04371-gd64e6c4-dirty #354
[   93.264621] Call Trace:
[   93.266533]  [<ffffffff81125e43>] pcpu_alloc+0x83a/0x8e7
[   93.270710]  [<ffffffff81125f15>] __alloc_percpu+0x10/0x12
[   93.285849]  [<ffffffff8140786c>] alloc_disk_node+0x94/0x16d
[   93.291811]  [<ffffffff81407956>] alloc_disk+0x11/0x13
[   93.306157]  [<ffffffff81503e51>] loop_alloc+0xa7/0x180
[   93.310538]  [<ffffffff8277ef48>] loop_init+0x9b/0x1a4
[   93.324909]  [<ffffffff8277eead>] ? loop_init+0x0/0x1a4
[   93.329650]  [<ffffffff810001f2>] do_one_initcall+0x57/0x136
[   93.345197]  [<ffffffff827486d0>] kernel_init+0x184/0x20e
[   93.348146]  [<ffffffff81034954>] kernel_thread_helper+0x4/0x10
[   93.365194]  [<ffffffff81c7cc3c>] ? restore_args+0x0/0x30
[   93.369305]  [<ffffffff8274854c>] ? kernel_init+0x0/0x20e
[   93.386011]  [<ffffffff81034950>] ? kernel_thread_helper+0x0/0x10
[   93.392047] loop: out of memory
...

Try to assign per_cpu(numa_node) early

[akpm@linux-foundation.org: tidy up code comment]
Signed-off-by: NYinghai <yinghai@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simply add a proper ID into the device table.
Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 5753c082 ("powerpc/85xx:
Kconfig cleanup"), there is no MPC85xx Kconfig symbol anymore, so the
driver became non-selectable.

This patch fixes the issue by switching to PPC_85xx symbol.
Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need lock_page_nosync() here because we have no reference to the
mapping when taking the page lock.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last change to improve the scalability moved the actual wake-up out of
the section that is protected by spin_lock(sma->sem_perm.lock).

This means that IN_WAKEUP can be in queue.status even when the spinlock is
acquired by the current task.  Thus the same loop that is performed when
queue.status is read without the spinlock acquired must be performed when
the spinlock is acquired.

Thanks to kamezawa.hiroyu@jp.fujitsu.com for noticing lack of the memory
barrier.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16255

[akpm@linux-foundation.org: clean up kerneldoc, checkpatch warning and whitespace]
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Reported-by: NLuca Tettamanti <kronos.it@gmail.com>
Tested-by: NLuca Tettamanti <kronos.it@gmail.com>
Reported-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

this fixes a regression since the fbcon rework.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On nv50 it became impossible to attempt a PCI ROM shadow of the VBIOS,
which will break some setups.

This patch also removes the different ordering of shadow methods for
pre-nv50 chipsets.  The reason for the different ordering was paranoia,
but it should hopefully be OK to try shadowing PRAMIN first.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes a regression caused by b2ea4aa6
due to the way shared ddc with multiple digital connectors was handled.

You generally have two cases where DDC lines are shared:
- HDMI + VGA
- HDMI + DVI-D

HDMI + VGA is easy to deal with because you can check the EDID for the
to see if the attached monitor is digital.  A shared DDC line with two
digital connectors is more complex.  You can't use the hdmi bits in the
EDID since they may not be there with DVI<->HDMI adapters.  In this case
all we can do is check the HPD pins to see which is connected as we have
no way of knowing using the EDID.

Reported-by: trapdoor6@gmail.com
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Having both IO-mapping.txt and io-mapping.txt in Documentation/
was confusing and/or bothersome to some people, so rename
IO-mapping.txt to bus-virt-phys-mapping.txt.  Also update
Documentation/00-INDEX for both of these files.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Kees Bakker <kees.bakker@xs4all.nl>
Cc: Keith Packard <keithp@keithp.com>

* git://git.infradead.org/users/cbou/battery-2.6.35:
  ds2782_battery: Fix ds2782_get_capacity return value

Otherwise all machine drivers need to do so.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The new netpoll code in bridging contains use-after-free bugs
that are non-trivial to fix.

This patch fixes this by removing the code that uses skbs after
they're freed.

As a consequence, this means that we can no longer call bridge
from the netpoll path, so this patch also removes the controller
function in order to disable netpoll.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Thanks,
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A lot of 945GMs have had stability issues for a long time, this manifested as X hangs, blitter engine hangs, and lots of crashes.

one such report is at:
https://bugs.freedesktop.org/show_bug.cgi?id=20560

along with numerous distro bugzillas.

This only took a week of digging and hair ripping to figure out.

Tracked down and tested on a 945GM Lenovo T60,
previously running
x11perf -copypixwin500
or
x11perf -copywinpix500
repeatedly would cause the GPU to wedge within 4 or 5 tries, with random busy bits set.

After this patch no hangs were observed.

cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

The i915 memory arbiter has a register full of configuration
bits which are currently not defined in the driver header file.
Signed-off-by: NKeith Packard <keithp@keithp.com>
cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>