- 11 7月, 2007 40 次提交
-
-
由 Joel Becker 提交于
Tell o2cb_region_dev_write() to wake up if rmdir(2) happens on the heartbeat region while it is starting up. Then o2hb_region_dev_write() can check to see if it is alive and act accordingly. This prevents a hang (not being woken) and a crash (if it's woken by a signal). Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
Removing the local node configuration out from underneath a running heartbeat is "bad". Provide an API in the ocfs2 nodemanager to request a configfs dependancy on the local node, then use it in heartbeat. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
ocfs2 mounts require a heartbeat region. Use the new configfs_depend_item() facility to actually depend on them so they can't go away from under us. First, teach cluster/nodemanager.c to depend an item on the o2cb subsystem. Then teach o2hb_register_callbacks to take a UUID and depend on the appropriate region. Finally, teach all users of o2hb to pass a UUID or NULL if they don't require a pin. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
Sometimes other drivers depend on particular configfs items. For example, ocfs2 mounts depend on a heartbeat region item. If that region item is removed with rmdir(2), the ocfs2 mount must BUG or go readonly. Not happy. This provides two additional API calls: configfs_depend_item() and configfs_undepend_item(). A client driver can call configfs_depend_item() on an existing item to tell configfs that it is depended on. configfs will then return -EBUSY from rmdir(2) for that item. When the item is no longer depended on, the client driver calls configfs_undepend_item() on it. These API cannot be called underneath any configfs callbacks, as they will conflict. They can block and allocate. A client driver probably shouldn't calling them of its own gumption. Rather it should be providing an API that external subsystems call. How does this work? Imagine the ocfs2 mount process. When it mounts, it asks for a heart region item. This is done via a call into the heartbeat code. Inside the heartbeat code, the region item is looked up. Here, the heartbeat code calls configfs_depend_item(). If it succeeds, then heartbeat knows the region is safe to give to ocfs2. If it fails, it was being torn down anyway, and heartbeat can gracefully pass up an error. [ Fixed some bad whitespace in configfs.txt. --Mark ] Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
Add a notification callback, ops->disconnect_notify(). It has the same prototype as ->drop_item(), but it will be called just before the item linkage is broken. This way, configfs users who want to do work while the object is still in the heirarchy have a chance. Client drivers will still need to config_item_put() in their ->drop_item(), if they implement it. They need do nothing in ->disconnect_notify(). They don't have to provide it if they don't care. But someone who wants to be notified before ci_parent is set to NULL can now be notified. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Johannes Berg 提交于
Seems copied from sysfs, but I don't see a reason here nor there to use a semaphore instead of a mutex. Convert. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
Convert the su_sem member of struct configfs_subsystem to a struct mutex, as that's what it is. Also convert all the users and update Documentation/configfs.txt and Documentation/configfs_example.c accordingly. [ Conflict in fs/dlm/config.c with commit 3168b078 manually resolved. --Mark ] Inspired-by: NSatyam Sharma <ssatyam@cse.iitk.ac.in> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Satyam Sharma 提交于
Configfs being based upon sysfs code, config_group_find_obj() is probably so named because of the similar kset_find_obj() in sysfs. However, "kobject"s in sysfs become "config_item"s in configfs, so let's call it config_group_find_item() instead, for sake of uniformity, and make corresponding change in the users of this function. BTW a crucial difference between kset_find_obj and config_group_find_item is in locking expectations. kset_find_obj does its locking by itself, but config_group_find_item expects the *caller* to do the locking. The reason for this: kset's have their own locks, config_group's don't but instead rely on the subsystem mutex. And, subsystem needn't necessarily be around when config_group_find_item() is called. So let's state these locking semantics explicitly, and rectify the comment, otherwise bugs could continue to occur in future, as they did in the past (refer commit d82b8191e238 in gfs2-2.6-fixes.git). [ I also took the opportunity to fix some bad whitespace and double-empty lines. --Joel ] [ Conflict in fs/dlm/config.c with commit 3168b078 manually resolved. --Mark ] Signed-off-by: NSatyam Sharma <ssatyam@cse.iitk.ac.in> Cc: David Teigland <teigland@redhat.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Satyam Sharma 提交于
fs/dlm/config.c contains a useful generic macro called __CONFIGFS_ATTR that is similar to sysfs' __ATTR macro that makes defining attributes easy for any user of configfs. Separate it out into configfs.h so that other users (forthcoming in dynamic netconsole patchset) can use it too. Signed-off-by: NSatyam Sharma <ssatyam@cse.iitk.ac.in> Cc: David Teigland <teigland@redhat.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Satyam Sharma 提交于
1. item.c:config_item_cleanup() is a private function (only called by config_item_release() in same file). However, it is spuriously exported in include/linux/configfs.h, so remove that export and make it static in item.c. Also, it is no longer exported / interface function, so no need to give comment for this function (the comment was stating obvious thing, anyway). 2. Kernel-doc comment format does not allow empty line between end of comment and start of function (declaration line). There were several such spurious empty lines in item.c, so fix them. fs/configfs/item.c | 15 +++------------ include/linux/configfs.h | 1 - 2 files changed, 3 insertions(+), 13 deletions(-) Signed-off-by: NSatyam Sharma <ssatyam@cse.iitk.ac.in> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
The attribute store/show code currently limits attributes at PAGE_SIZE. This code comes from sysfs, where it still works that way. However, PAGE_SIZE is not constant. A 16k attribute string works on ia64 but not on x86. Really a subsystem shouldn't allow different attribute sizes based on platform. As such, limit all simple attributes to 4k. This works on all platforms, and is consistent with all current code. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: at91_mci: fix hanging and rework to match flowcharts mmc: at91_mci typo sdhci: Fix "Unexpected interrupt" handling mmc: fix silly copy-and-paste error mmc: move layer init and workqueue to core file mmc: refactor host class handling mmc: refactor bus operations sdhci: add ene controller id mmc: bounce requests for simple hosts
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits) bonding/bond_main.c: make 2 functions static ps3: gigabit ethernet driver for PS3, take3 [netdrvr] Fix dependencies for ax88796 ne2k clone driver eHEA: Capability flag for DLPAR support Remove sk98lin ethernet driver. sunhme.c:quattro_pci_find() must be __devinit bonding / ipv6: no addrconf for slaves separately from master atl1: remove write-only var in tx handler macmace: use "unsigned long flags;" Cleanup usbnet_probe() return value handling netxen: deinline and sparse fix eeprom_93cx6: shorten pulse timing to match spec (bis) phylib: Add Marvell 88E1112 phy id phylib: cleanup marvell.c a bit AX88796 network driver IOC3: Switch to pci refcounting safe APIs e100: Fix Tyan motherboard e100 not receiving IPMI commands QE Ethernet driver writes to wrong register to mask interrupts rrunner.c:rr_init() must be __devinit tokenring/3c359.c:xl_init() must be __devinit ...
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (32 commits) [libata] sata_mv: print out additional chip info during probe [libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info [libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) [libata] Clean up driver udma_mask initializers libata: Support chips with 64K PRD quirk Add a PCI ID for santa rosa's PATA controller. sata_sil24: sil24_interrupt() micro-optimisation Add irq_flags to struct pata_platform_info sata_promise: cleanups [libata] pata_ixp4xx: kill unused var ata_piix: fix pio/mwdma programming [libata] ahci: minor internal cleanups [ATA] Add named constant for ATAPI command DEVICE RESET [libata] sata_sx4, sata_via: minor documentation updates [libata] ahci: minor internal cleanups [libata] ahci: Factor out SATA port init into a separate function [libata] pata_sil680: minor cleanups from benh [libata] sata_sx4: named constant cleanup [libata] pata_ixp4xx: convert to new EH [libata] pdc_adma: Reorder initializers with a couple structs ...
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (62 commits) [MIPS] PNX8550: Cleanup proc code. [MIPS] WRPPMC: Fix build. [MIPS] Yosemite: Fix modpost warnings. [MIPS] Change names of local variables to silence sparse [MIPS] SB1: Fix modpost warning. [MIPS] PNX: Fix modpost warnings. [MIPS] Alchemy: Fix modpost warnings. [MIPS] Non-FPAFF: Fix warning. [MIPS] DEC: Fix modpost warning. [MIPS] MIPSsim: Enable MIPSsim virtual network driver. [MIPS] Delete Ocelot 3 support. [MIPS] remove LASAT Networks platforms support [MIPS] Early check for SMTC kernel on non-MT processor [MIPS] Add debugfs files to show fpuemu statistics [MIPS] Add some debugfs files to debug unaligned accesses [MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs [MIPS] tc35815: Load MAC address via platform_device [MIPS] Move FPU affinity code into separate file. [MIPS] Make ioremap() work on TX39/49 special unmapped segment [MIPS] rbtx4938: Update and minimize defconfig ...
-
git://git.infradead.org/~dwmw2/battery-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/~dwmw2/battery-2.6: [BATTERY] ds2760 W1 slave [BATTERY] One Laptop Per Child power/battery driver [BATTERY] Apple PMU driver [BATTERY] 1-Wire ds2760 chip battery driver [BATTERY] APM emulation driver for class batteries [BATTERY] pda_power platform driver [BATTERY] Universal power supply class (was: battery class)
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] vmlogrdr function annotation. [S390] s390: rename CPU_IDLE to S390_CPU_IDLE [S390] cio: Remove prototype for non-existing function cmf_reset(). [S390] zcrypt: fix request timeout handling [S390] system call optimization. [S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILE [S390] Remove volatile from atomic_t [S390] Program check in diag 210 under 31 bit [S390] Bogomips calculation for 64 bit. [S390] smp: Merge smp_count_cpus() and smp_get_save_areas(). [S390] zcore: Fix __user annotation. [S390] fixed cdl-format detection. [S390] sclp: Test facility list before executing a service call. [S390] sclp: introduce some new interfaces. [S390] Fixed comment typo. [S390] vmcp cleanup
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits) [GFS2] Accept old format NFS filehandles [GFS2] Small fixes to logging code [DLM] dump more lock values [GFS2] Remove i_mode passing from NFS File Handle [GFS2] Obtaining no_formal_ino from directory entry [GFS2] git-gfs2-nmw-build-fix [GFS2] System won't suspend with GFS2 file system mounted [GFS2] remounting w/o acl option leaves acls enabled [GFS2] inode size inconsistency [DLM] Telnet to port 21064 can stop all lockspaces [GFS2] Fix gfs2_block_truncate_page err return [GFS2] Addendum to the journaled file/unmount patch [GFS2] Simplify multiple glock aquisition [GFS2] assertion failure after writing to journaled file, umount [GFS2] Use zero_user_page() in stuffed_readpage() [GFS2] Remove bogus '\0' in rgrp.c [GFS2] Journaled file write/unstuff bug [DLM] don't require FS flag on all nodes [GFS2] Fix deallocation issues [GFS2] return conflicts for GETLK ...
-
git://git.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block: pipe: add documentation and comments pipe: change the ->pin() operation to ->confirm() Remove remnants of sendfile() xip sendfile removal splice: completely document external interface with kerneldoc sendfile: remove bad_sendfile() from bad_file_ops shmem: convert to using splice instead of sendfile() relay: use splice_to_pipe() instead of open-coding the pipe loop pipe: allow passing around of ops private pointer splice: divorce the splice structure/function definitions from the pipe header splice: relay support sendfile: convert nfsd to splice_direct_to_actor() sendfile: convert nfs to using splice_read() loop: convert to using splice_direct_to_actor() instead of sendfile() splice: add void cookie to the actor data sendfile: kill generic_file_sendfile() sendfile: remove .sendfile from filesystems that use generic_file_sendfile() sys_sendfile: switch to using ->splice_read, if available vmsplice: add vmsplice-to-user support splice: abstract out actor data
-
git://git.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block: Documentation/block/barrier.txt is not in sync with the actual code: - blk_queue_ordered() no longer has a gfp_mask parameter - blk_queue_ordered_locked() no longer exists - sd_prepare_flush() looks slightly different Use list_for_each_entry() instead of list_for_each() in the block device Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", block/Kconfig already has its own "menuconfig" so remove these Use menuconfigs instead of menus, so the whole menu can be disabled at once cfq-iosched: fix async queue behaviour unexport bio_{,un}map_user Remove legacy CDROM drivers [PATCH] fix request->cmd == INT cases cciss: add new controller support for P700m [PATCH] Remove acsi.c [BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endio [PATCH] cdrom_sysctl_info fix blk_hw_contig_segment(): bad segment size checks [TRIVIAL PATCH] Kill blk_congestion_wait() stub for !CONFIG_BLOCK
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Chad Tindel <ctindel@users.sourceforge.net> Cc: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Masakazu Mokuno 提交于
Hi, This is the third submission of the network driver for PS3. The differences from the previous one are: - renamed source file names so that their prefix can match with the module name - added cbe-oss-dev@ozlabs.org line for MAINTAINER file - changed some in copyright comments If there are no more comments, please apply for 2.6.23. Thank you -- Subject: PS3: Ethernet driver From: Masakazu Mokuno <mokuno@sm.sony.co.jp> Add Gigabit Ethernet support for the PS3 game console. The module will be called ps3_gelic. CC: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
It needs writesb(), not available on all platforms. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jan-Bernd Themann 提交于
This patch introduces a capability flag that is used by the DLPAR userspace tool to check which DLPAR features are supported by the eHEA driver. Missing goto has been included. Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Unmaintained, superceded by skge. Prodded to deletion by Adrian Bunk. Acked by Stephen Hemminger. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Adrian Bunk 提交于
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x272f8b): Section mismatch: reference to .init.text:quattro_pci_find (between 'happy_meal_pci_probe' and 'happy_meal_pci_remove') ... <-- snip --> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jay Vosburgh 提交于
At present, when a device is enslaved to bonding, if ipv6 is active then addrconf will be initated on the slave (because it is closed then opened during the enslavement processing). This causes DAD and RS packets to be sent from the slave. These packets in turn can confuse switches that perform ipv6 snooping, causing them to incorrectly update their forwarding tables (if, e.g., the slave being added is an inactve backup that won't be used right away) and direct traffic away from the active slave to a backup slave (where the incoming packets will be dropped). This patch alters the behavior so that addrconf will only run on the master device itself. I believe this is logically correct, as it prevents slaves from having an IPv6 identity independent from the master. This is consistent with the IPv4 behavior for bonding. This is accomplished by (a) having bonding set IFF_SLAVE sooner in the enslavement processing than currently occurs (before open, not after), and (b) having ipv6 addrconf ignore UP and CHANGE events on slave devices. The eql driver also uses the IFF_SLAVE flag. I inspected eql, and I believe this change is reasonable for its usage of IFF_SLAVE, but I did not test it. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alexey Dobriyan 提交于
Code will do local_irq_save() on it. Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Peter Korsgaard 提交于
usbnet_probe() handles a positive return value from the driver bind() function as success, but will later only setup the status handler if the return value was zero, leading to confusion. Patch adjusts this to accept positive values as success in both checks. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Get rid of dubious casts to (void *) which causes a sparse warning. And move largeish function from inline to the one file that uses the code, the compiler can then decide to inline it. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Francois Romieu 提交于
Based on an original idea by John W. Linville. It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Olof Johansson 提交于
Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the 88E1111 inits. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Olof Johansson 提交于
Simplify the marvell driver init a bit: Make the supported devices an array instead of explicitly registering each structure. This makes it considerably easier to add new devices down the road. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ben Dooks 提交于
Support for the Asix AX88796 network controller, an NE2000 compatible 10/100 ethernet device with internal PHY. The driver supports PHY settings via either ioctl() or the ethtool driver ops. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Robert P. J. Day 提交于
Here's a slightly cleaner way of creating the /proc structure for the pnx8850. mostly, it creates a directory with default mode 555, since the one you're creating is mode 444, which is somewhat unusual for a directory under /proc. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Using another systems defines is a safe way to get your code broken by accident when that system is removed. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
MODPOST vmlinux WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x974): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x980): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x978): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x984): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x98c): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x990): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done') Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
This patch is an workaround for these sparse warnings: linux/include/linux/calc64.h:25:17: warning: symbol '__quot' shadows an earlier one linux/include/linux/calc64.h:25:17: originally declared here linux/include/linux/calc64.h:25:17: warning: symbol '__mod' shadows an earlier one linux/include/linux/calc64.h:25:17: originally declared here Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
MODPOST vmlinux WARNING: arch/mips/mm/built-in.o(.text+0x1978): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp') WARNING: arch/mips/mm/built-in.o(.text+0x1988): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp') Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-