- 23 4月, 2009 40 次提交
-
-
由 Johannes Berg 提交于
Just setting IEEE80211_CONF_CHANGE_PS should be sufficient for changes in the power saving things. The driver already tells us whether it wants notification of dynps via the "have dynps support" hw flag. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Reviewed-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Stephen Rothwell reported these warnings from a 32-bit build: net/mac80211/mlme.c:1771: warning: left shift count >= width of type net/mac80211/mlme.c:1772: warning: left shift count >= width of type net/mac80211/mlme.c:1773: warning: left shift count >= width of type net/mac80211/mlme.c:1774: warning: left shift count >= width of type net/mac80211/mlme.c:1775: warning: left shift count >= width of type This shows a bug in my code -- BIT(X) uses just "1 << X" which means a 32-bit integer on 32-bit platforms, but the code here needs a u64 on all platforms. Fix this by using "1ULL << X" instead of BIT(X). Thanks Stephen! Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jussi Kivilinna 提交于
Private structure is allocated by wiphy_new now, so use wiphy_free instead of kfree. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jussi Kivilinna 提交于
rndis_wext_link_change() might be called from rndis_command() at initialization stage and priv->workqueue/priv->work have not been initialized yet. This causes invalid opcode at rndis_wext_bind on some brands of bcm4320. Fix by initializing workqueue/workers in rndis_wext_bind() before rndis_command is used. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
sparse complains, correctly, about these: drivers/net/wireless/rndis_wlan.c:418:21: warning: symbol 'rndis_config_ops' was not declared. Should it be static? drivers/net/wireless/rndis_wlan.c:423:6: warning: symbol 'rndis_wiphy_privid' was not declared. Should it be static? Fix that. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
With the RCU locking here we sleep while in an atomic context, since we can sleep just use mutex locking for the interface list instead of RCU. Sorry, seems I didn't get that in my UML test. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohamed Abbas 提交于
Allow user to config the device all the time but only allow commiting these changes to card if the card is up and running. Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Patch removes the "manual radio disable" parameter as there is no usage scenario of disabling radio using this module parameter. User can use iwconfig's txpower to enable and disable radio. This module parameter also does not work as expected. During module load the status of radio is set, the radio is not actually disabled. Even so, the moment mac80211 requests the interface to be up the radio will be enabled again. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohamed Abbas 提交于
Function rs_stay_in_table was flushing the rate scale table way to early. time_after macro in expecting long value and was failing because we passing u32 value. Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
This patch clean up the code for NL80211_IFTYPE_MONITOR mode, priv->iw_mode is set in add_interface, but add_interface is never called for monitor mode. The only way mac80211 informs us about monitor mode is through configuring filter; since iw_mode will never set to NL80211_IFTYPE_MONITOR, modify and remove all the code refer to NL80211_IFTYPE_MONITOR and replace with iwl_is_monitor_mode() function call. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
This patch calculates interrupt statistics for debugfs. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Patch adds debugfs to 3945. Also fix debugfs registration in iwlagn to return error code if it fails. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
If passive scanning is requested we should not ask the microcode to do active scanning after detecting traffic on a channel -- that should only be used when an active scan is requested but some channels are marked passive. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This modifies iwlwifi to * no longer build its own probe request, but use mac80211's * therefore, support arbitrary scan IEs (up to the max len) * support multiple scan SSIDs * support passive scanning Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This limit applies to current (APIv1 and APIv2) 3945 firmware only, not supported firmware of any of the other cards. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
With this patch ar9170 is capable of receiving aggregated 802.11n frames and sniffing on most networks without having a "debug message overhead". (Includes phy initialization requested by Johannes Berg <johannes@sipsolutions.net> -- JWL) Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The TIM IE must not be shorter than 4 bytes, so verify that when parsing it and use the proper type. To ease that adjust struct ieee80211_tim_ie to have a virtual bitmap of size at least 1. Also check that the TIM IE is actually present before trying to parse it! Because other people may need the function, make it a static inline in ieee80211.h. (The original "mac80211: validate TIM IE length" was a minimal fix for 2.6.30. This purports to be the full, correct fix. -- JWL) Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The fact that these are exported is a technical detail of the conversion period -- we don't want anybody to start relying on these. Ultimately we want things to use cfg80211 only, and once everything that is in wext is converted to cfg80211 drivers will not need to touch wext _at all_. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When we leave an IBSS, we should clear the SSID and not just the BSSID, but since WEXT allows configuring while the interface is down we must not clear it when leaving due to taking the iface down, so some complications are needed. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
Add new nl80211 attributes that can be used with NL80211_CMD_SET_WIPHY and NL80211_CMD_GET_WIPHY to manage fragmentation/RTS threshold and retry limits. Since these values are stored in struct wiphy, remove the local copy from mac80211 where feasible (frag & rts threshold). The retry limits are currently needed in struct ieee80211_conf, but these could be eventually removed since the driver should have access to the values in struct wiphy. Signed-off-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch adds support for configuring HT40 channels and receiving HT40 to ar9170. Receiving aggregation doesn't seem to work right now, so it's not enabled. Same goes for TX aggregation, but that probably needs even more work. With this, I can receive roughly 33 Mbits/sec. The HT capabilities are a little odd, I tried following otus here -- in particular having SGI_40 but not SGI_20 is a little weird but afaict that's what otus does. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Supporting wireless extension nickname is pointless and no other modern driver supports this, so remove it. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Trying to separate header files into net/wireless.h and net/cfg80211.h has been a source of confusion. Remove net/wireless.h (because there also is the linux/wireless.h) and subsume everything into net/cfg80211.h -- except the definitions for regulatory structures which get moved to a new header net/regulatory.h. The "new" net/cfg80211.h is now divided into sections. There are no real changes in this patch but code shuffling and some very minor documentation fixes. I have also, to make things reflect reality, put in a copyright line for Luis to net/regulatory.h since that is probably exclusively written by him but was formerly in a file that only had my copyright line. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This converts mac80211 to the new cfg80211 IBSS API, the wext handling functions are called where appropriate. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Since we have ->deauth and ->disassoc we can support the wext SIWMLME call directly without driver wext handlers. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When listing all wireless netdevs in the system this is useful to print which wiphy they belong to. Just add the attribute, any program that doesn't care will just ignore it. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch sets IEEE80211_TX_CTL_CLEAR_PS_FILT for outgoing frames for a half-wake station. this is necessary if one wants to get ps-poll working properly with a p54 ap. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
PS-Polled frames must be sent with OUT_NOCANCEL flag set, or the firmware will reject all of them, at the station is still blacklisted. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The following patch implements some control over the LED on RTL8187B and RTL8187L devices. Triggers are registered for TX and RX. Whenever the trigger event occurs, the LED is turned off for 1/20 second, then turned back on. Note: For those RTL8187X devices that are built into the computer and have a LED that is expected to be controlled with a radio switch, this patch will not operate that LED. That will take a separate patch to be prepared later. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: NHin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
We can allow scan requests in AP mode as long as the interface has not yet been configured to send out Beacon frames (or if beaconing has been disabled prior to the scan request). This makes it easier to scan for neighboring BSSes during AP initialization and makes it possible to run a scan without setting the interface down, if needed. Without this change, the only available option would be to set the interface down, move into station mode, and set the interface up, prior to requesting the scan. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Document what mac80211 will do in the future to help save power. We're not quite there yet, but a plan helps. Also, while at it, fix the docs wrt. multicast traffic. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Reviewed-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Enable PS by default (depending on Kconfig) -- rely on drivers to control the level using pm_qos. Due to the previous patch we turn off PS when necessary due to latency requirements. This has a Kconfig symbol so people can, if they really want, configure the default in their kernels. We may want to keep it at "default y" only in wireless-testing for a while. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Regardless of whether the hardware implements beacon filtering, there's no need to process all beacons in software all the time throughout the stack (mac80211 does a lot, then cfg80211, then in the future possibly userspace). This patch implements the "best possible" beacon filtering in mac80211. "Best possible" means that it can look for changes in all requested information elements, and distinguish vendor IEs by their OUI. In the future, we will add nl80211 API for userspace to request information elements and vendor IE OUIs to watch -- drivers can then implement the best they can do while software implements it fully. It is unclear whether or not this actually saves CPU time, but the data is all in the cache already so it should be fairly cheap. The additional _testing_, however, has great benefit; Without this, and on hardware that doesn't implement beacon filtering, wrong assumptions about, for example, scan result updates could quickly creep into code. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When an application asks for a latency lower than the beacon interval there's nothing we can do -- we need to stay awake and not have the AP buffer frames for us. Add code to automatically calculate this constraint in mac80211 so drivers need not concern themselves with it. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When you have multiple virtual interfaces the current implementation requires setting them up properly from userspace, which is undesirable when we want to default to power save mode. Keep track of powersave requested from userspace per managed mode interface, and only enable powersave globally when exactly one managed mode interface is active and has powersave turned on. Second, only start the dynPS timer when PS is turned on, and properly turn it off when PS is turned off. Third, fix the scan_sdata abuse in the dynps code. Finally, also reorder the code and refactor the code that enables PS or the dynps timer instead of having it copied in two places. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Marek Vasut 提交于
A detection function was added for identifying CF8381. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch deactivates powersave in station mode. It does not work correctly yet, so the code does more harm than good. (I split the original patch and sent part of it for 2.6.30, which didn't have the IEEE80211_HW_BEACON_FILTER flag. -- JWL) Reported-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
When the EEPROM is not in good condition we cannot continue so we currently bail out but only ath5k is bailing out properly. Both ath9k and ar9170 were proceeding and if a user were to run into this they'd see an obscure panic. Lets propagate the error as intended and make sure we inform the user by lifting the error message from debug to a kernel error. Stable note: You can find a port of this page here: http://bombadil.infradead.org/~mcgrof/patches/ath9k/ath9k-fix-eeprom.patch.txt Cc: stable@kernel.org Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
Grabbing an ath5k_buf then dropping the lock is racy because the referenced descriptor can be obtained in another thread and released before the buffer is handed to the hardware. Likewise, manipulating sc->rxlink without the lock can lead to having multiple self-linked hardware descriptors. Changes-licensed-under: 3-Clause-BSD Signed-off-by: NBob Copeland <me@bobcopeland.com> Acked-by: NNick Kossifidis <mickflemm@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-