When the node is offlined, there is no memory/cpu on the node.  If a
sleep task runs on a cpu of this node, it will be migrated to the cpu on
the other node.  So we can clear cpu-to-node mapping.

[akpm@linux-foundation.org: numa_clear_node() and numa_set_node() can no longer be __cpuinit]
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

try_offline_node() will be needed in the tristate
drivers/acpi/processor_driver.c.

The node will be offlined when all memory/cpu on the node have been
hotremoved.  So we need the function try_offline_node() in cpu-hotplug
path.

If the memory-hotplug is disabled, and cpu-hotplug is enabled

1. no memory no the node
   we don't online the node, and cpu's node is the nearest node.

2. the node contains some memory
   the node has been onlined, and cpu's node is still needed
   to migrate the sleep task on the cpu to the same node.

So we do nothing in try_offline_node() in this case.

[rientjes@google.com: export the function try_offline_node() fix]
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since there is no way to guarentee the address of pgdat/zone is not on
stack of any kernel threads or used by other kernel objects without
reference counting or other symchronizing method, we cannot reset
node_data and free pgdat when offlining a node.  Just reset pgdat to 0
and reuse the memory when the node is online again.

The problem is suggested by Kamezawa Hiroyuki.  The idea is from Wen
Congyang.

NOTE: If we don't reset pgdat to 0, the WARN_ON in free_area_init_node()
      will be triggered.

[akpm@linux-foundation.org: fix warning when CONFIG_NEED_MULTIPLE_NODES=n]
[akpm@linux-foundation.org: fix the warning again again]
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: NWen Congyang <wency@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We call hotadd_new_pgdat() to allocate memory to store node_data.  So we
should free it when removing a node.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: NKamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce a new function try_offline_node() to remove sysfs file of node
when all memory sections of this node are removed.  If some memory
sections of this node are not removed, this function does nothing.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When memory is added, we update zone's and pgdat's start_pfn and
spanned_pages in __add_zone().  So we should revert them when the memory
is removed.

The patch adds a new function __remove_zone() to do this.
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently __remove_section for SPARSEMEM_VMEMMAP does nothing.  But even
if we use SPARSEMEM_VMEMMAP, we can unregister the memory_section.
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In __remove_section(), we locked pgdat_resize_lock when calling
sparse_remove_one_section().  This lock will disable irq.  But we don't
need to lock the whole function.  If we do some work to free pagetables
in free_section_usemap(), we need to call flush_tlb_all(), which need
irq enabled.  Otherwise the WARN_ON_ONCE() in smp_call_function_many()
will be triggered.

If we lock the whole sparse_remove_one_section(), then we come to this call trace:

  ------------[ cut here ]------------
  WARNING: at kernel/smp.c:461 smp_call_function_many+0xbd/0x260()
  Hardware name: PRIMEQUEST 1800E
  ......
  Call Trace:
    smp_call_function_many+0xbd/0x260
    smp_call_function+0x3b/0x50
    on_each_cpu+0x3b/0xc0
    flush_tlb_all+0x1c/0x20
    remove_pagetable+0x14e/0x1d0
    vmemmap_free+0x18/0x20
    sparse_remove_one_section+0xf7/0x100
    __remove_section+0xa2/0xb0
    __remove_pages+0xa0/0xd0
    arch_remove_memory+0x6b/0xc0
    remove_memory+0xb8/0xf0
    acpi_memory_device_remove+0x53/0x96
    acpi_device_remove+0x90/0xb2
    __device_release_driver+0x7c/0xf0
    device_release_driver+0x2f/0x50
    acpi_bus_remove+0x32/0x6d
    acpi_bus_trim+0x91/0x102
    acpi_bus_hot_remove_device+0x88/0x16b
    acpi_os_execute_deferred+0x27/0x34
    process_one_work+0x20e/0x5c0
    worker_thread+0x12e/0x370
    kthread+0xee/0x100
    ret_from_fork+0x7c/0xb0
  ---[ end trace 25e85300f542aa01 ]---
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For removing memmap region of sparse-vmemmap which is allocated bootmem,
memmap region of sparse-vmemmap needs to be registered by
get_page_bootmem().  So the patch searches pages of virtual mapping and
registers the pages by get_page_bootmem().

NOTE: register_page_bootmem_memmap() is not implemented for ia64,
      ppc, s390, and sparc.  So introduce CONFIG_HAVE_BOOTMEM_INFO_NODE
      and revert register_page_bootmem_info_node() when platform doesn't
      support it.

      It's implemented by adding a new Kconfig option named
      CONFIG_HAVE_BOOTMEM_INFO_NODE, which will be automatically selected
      by memory-hotplug feature fully supported archs(currently only on
      x86_64).

      Since we have 2 config options called MEMORY_HOTPLUG and
      MEMORY_HOTREMOVE used for memory hot-add and hot-remove separately,
      and codes in function register_page_bootmem_info_node() are only
      used for collecting infomation for hot-remove, so reside it under
      MEMORY_HOTREMOVE.

      Besides page_isolation.c selected by MEMORY_ISOLATION under
      MEMORY_HOTPLUG is also such case, move it too.

[mhocko@suse.cz: put register_page_bootmem_memmap inside CONFIG_MEMORY_HOTPLUG_SPARSE]
[linfeng@cn.fujitsu.com: introduce CONFIG_HAVE_BOOTMEM_INFO_NODE and revert register_page_bootmem_info_node()]
[mhocko@suse.cz: remove the arch specific functions without any implementation]
[linfeng@cn.fujitsu.com: mm/Kconfig: move auto selects from MEMORY_HOTPLUG to MEMORY_HOTREMOVE as needed]
[rientjes@google.com: fix defined but not used warning]
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: NWu Jianguo <wujianguo@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NLin Feng <linfeng@cn.fujitsu.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For removing memory, we need to remove page tables.  But it depends on
architecture.  So the patch introduce arch_remove_memory() for removing
page table.  Now it only calls __remove_pages().

Note: __remove_pages() for some archtecuture is not implemented
      (I don't know how to implement it for s390).
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start,
type} sysfs files are created.  But there is no code to remove these
files.  This patch implements the function to remove them.

We cannot free firmware_map_entry which is allocated by bootmem because
there is no way to do so when the system is up.  But we can at least
remember the address of that memory and reuse the storage when the
memory is added next time.

This patch also introduces a new list map_entries_bootmem to link the
map entries allocated by bootmem when they are removed, and a lock to
protect it.  And these entries will be reused when the memory is
hot-added again.

The idea is suggestted by Andrew Morton.

NOTE: It is unsafe to return an entry pointer and release the
      map_entries_lock.  So we should not hold the map_entries_lock
      separately in firmware_map_find_entry() and
      firmware_map_remove_entry().  Hold the map_entries_lock across find
      and remove /sys/firmware/memmap/X operation.

       And also, users of these two functions need to be careful to
      hold the lock when using these two functions.

[tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation]
[tangchen@cn.fujitsu.com: fix the wrong comments of map_entries]
[tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem]
[tangchen@cn.fujitsu.com: fix section mismatch problem]
[tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c]
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: NKamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

offlining memory blocks and checking whether memory blocks are offlined
are very similar.  This patch introduces a new function to remove
redundant codes.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: NKamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We remove the memory like this:

 1. lock memory hotplug
 2. offline a memory block
 3. unlock memory hotplug
 4. repeat 1-3 to offline all memory blocks
 5. lock memory hotplug
 6. remove memory(TODO)
 7. unlock memory hotplug

All memory blocks must be offlined before removing memory.  But we don't
hold the lock in the whole operation.  So we should check whether all
memory blocks are offlined before step6.  Otherwise, kernel maybe
panicked.

Offlining a memory block and removing a memory device can be two
different operations.  Users can just offline some memory blocks without
removing the memory device.  For this purpose, the kernel has held
lock_memory_hotplug() in __offline_pages().  To reuse the code for
memory hot-remove, we repeat step 1-3 to offline all the memory blocks,
repeatedly lock and unlock memory hotplug, but not hold the memory
hotplug lock in the whole operation.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memory can't be offlined when CONFIG_MEMCG is selected.  For example:
there is a memory device on node 1.  The address range is [1G, 1.5G).
You will find 4 new directories memory8, memory9, memory10, and memory11
under the directory /sys/devices/system/memory/.

If CONFIG_MEMCG is selected, we will allocate memory to store page
cgroup when we online pages.  When we online memory8, the memory stored
page cgroup is not provided by this memory device.  But when we online
memory9, the memory stored page cgroup may be provided by memory8.  So
we can't offline memory8 now.  We should offline the memory in the
reversed order.

When the memory device is hotremoved, we will auto offline memory
provided by this memory device.  But we don't know which memory is
onlined first, so offlining memory may fail.  In such case, iterate
twice to offline the memory.  1st iterate: offline every non primary
memory block.  2nd iterate: offline primary (i.e.  first added) memory
block.

This idea is suggested by KOSAKI Motohiro.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove one redundant check of res.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently a zone's present_pages is calcuated as below, which is
inaccurate and may cause trouble to memory hotplug.

	spanned_pages - absent_pages - memmap_pages - dma_reserve.

During fixing bugs caused by inaccurate zone->present_pages, we found
zone->present_pages has been abused.  The field zone->present_pages may
have different meanings in different contexts:

1) pages existing in a zone.
2) pages managed by the buddy system.

For more discussions about the issue, please refer to:
  http://lkml.org/lkml/2012/11/5/866
  https://patchwork.kernel.org/patch/1346751/

This patchset tries to introduce a new field named "managed_pages" to
struct zone, which counts "pages managed by the buddy system".  And revert
zone->present_pages to count "physical pages existing in a zone", which
also keep in consistence with pgdat->node_present_pages.

We will set an initial value for zone->managed_pages in function
free_area_init_core() and will adjust it later if the initial value is
inaccurate.

For DMA/normal zones, the initial value is set to:

	(spanned_pages - absent_pages - memmap_pages - dma_reserve)

Later zone->managed_pages will be adjusted to the accurate value when the
bootmem allocator frees all free pages to the buddy system in function
free_all_bootmem_node() and free_all_bootmem().

The bootmem allocator doesn't touch highmem pages, so highmem zones'
managed_pages is set to the accurate value "spanned_pages - absent_pages"
in function free_area_init_core() and won't be updated anymore.

This patch also adds a new field "managed_pages" to /proc/zoneinfo
and sysrq showmem.

[akpm@linux-foundation.org: small comment tweaks]
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now, memory management can handle movable node or nodes which don't have
any normal memory, so we can dynamic configure and add movable node by:

	online a ZONE_MOVABLE memory from a previous offline node
	offline the last normal memory which result a non-normal-memory-node

movable-node is very important for power-saving, hardware partitioning and
high-available-system(hardware fault management).
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update nodemasks management for N_MEMORY.

[lliubbo@gmail.com: fix build]
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Old memory hotplug code and new online/movable may cause a online node
don't have any normal memory, but memory-management acts bad when we have
nodes which is online but don't have any normal memory.  Example: it may
cause a bound task fail on all kernel allocation and cause the task can't
create task or create other kernel object.

So we disable non-normal-memory-node here, we will enable it when we
prepared.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make online_movable/online_kernel can empty a zone or can move memory to a
empty zone.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add online_movable and online_kernel for logic memory hotplug.  This is
the dynamic version of "movablecore" & "kernelcore".

We have the same reason to introduce it as to introduce "movablecore" &
"kernelcore".  It has the same motive as "movablecore" & "kernelcore", but
it is dynamic/running-time:

o We can configure memory as kernelcore or movablecore after boot.

  Userspace workload is increased, we need more hugepage, we can't use
  "online_movable" to add memory and allow the system use more
  THP(transparent-huge-page), vice-verse when kernel workload is increase.

  Also help for virtualization to dynamic configure host/guest's memory,
  to save/(reduce waste) memory.

  Memory capacity on Demand

o When a new node is physically online after boot, we need to use
  "online_movable" or "online_kernel" to configure/portion it as we
  expected when we logic-online it.

  This configuration also helps for physically-memory-migrate.

o all benefit as the same as existed "movablecore" & "kernelcore".

o Preparing for movable-node, which is very important for power-saving,
  hardware partitioning and high-available-system(hardware fault
  management).

(Note, we don't introduce movable-node here.)

Action behavior:
When a memoryblock/memorysection is onlined by "online_movable", the kernel
will not have directly reference to the page of the memoryblock,
thus we can remove that memory any time when needed.

When it is online by "online_kernel", the kernel can use it.
When it is online by "online", the zone type doesn't changed.

Current constraints:
Only the memoryblock which is adjacent to the ZONE_MOVABLE
can be online from ZONE_NORMAL to ZONE_MOVABLE.

[akpm@linux-foundation.org: use min_t, cleanups]
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we hot-remove memory only and leave the cpus alive, the corresponding
node will not be removed.  But the node_start_pfn and node_spanned_pages
in pg_data will be reset to 0.  In this case, when we hot-add the memory
back next time, the node_start_pfn will always be 0 because no pfn is less
than 0.  After that, if we hot-remove the memory again, it will cause
kernel panic in function find_biggest_section_pfn() when it tries to scan
all the pfns.

The zone will also have the same problem.

This patch sets start_pfn to the start_pfn of the section being added when
spanned_pages of the zone or pg_data is 0.

  ---How to reproduce---

1. hot-add a container with some memory and cpus;
2. hot-remove the container's memory, and leave cpus there;
3. hot-add these memory again;
4. hot-remove them again;

then, the kernel will panic.

  ---Call trace---

  BUG: unable to handle kernel paging request at 00000fff82a8cc38
  IP: [<ffffffff811c0d55>] find_biggest_section_pfn+0xe5/0x180
  ......
  Call Trace:
   [<ffffffff811c1124>] __remove_zone+0x184/0x1b0
   [<ffffffff811c11dc>] __remove_section+0x8c/0xb0
   [<ffffffff811c12e7>] __remove_pages+0xe7/0x120
   [<ffffffff81654f7c>] arch_remove_memory+0x2c/0x80
   [<ffffffff81655bb6>] remove_memory+0x56/0x90
   [<ffffffff813da0c8>] acpi_memory_device_remove_memory+0x48/0x73
   [<ffffffff813da55a>] acpi_memory_device_notify+0x153/0x274
   [<ffffffff813b6786>] acpi_ev_notify_dispatch+0x41/0x5f
   [<ffffffff813a3867>] acpi_os_execute_deferred+0x27/0x34
   [<ffffffff81090589>] process_one_work+0x219/0x680
   [<ffffffff810923be>] worker_thread+0x12e/0x320
   [<ffffffff81098396>] kthread+0xc6/0xd0
   [<ffffffff8167c7c4>] kernel_thread_helper+0x4/0x10
  ......
  ---[ end trace 96d845dbf33fee11 ]---
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently memory_hotplug only manages the node_states[N_HIGH_MEMORY], it
forgets to manage node_states[N_NORMAL_MEMORY].  This may cause
node_states[N_NORMAL_MEMORY] to become incorrect.

Example, if a node is empty before online, and we online a memory which is
in ZONE_NORMAL.  And after online, node_states[N_HIGH_MEMORY] is correct,
but node_states[N_NORMAL_MEMORY] is incorrect, the online code doesn't set
the new online node to node_states[N_NORMAL_MEMORY].

The same thing will happen when offlining (the offline code doesn't clear
the node from node_states[N_NORMAL_MEMORY] when needed).  Some memory
managment code depends node_states[N_NORMAL_MEMORY], so we have to fix up
the node_states[N_NORMAL_MEMORY].

We add node_states_check_changes_online() and
node_states_check_changes_offline() to detect whether
node_states[N_HIGH_MEMORY] and node_states[N_NORMAL_MEMORY] are changed
while hotpluging.

Also add @status_change_nid_normal to struct memory_notify, thus the
memory hotplug callbacks know whether the node_states[N_NORMAL_MEMORY] are
changed.  (We can add a @flags and reuse @status_change_nid instead of
introducing @status_change_nid_normal, but it will add much more
complexity in memory hotplug callback in every subsystem.  So introducing
@status_change_nid_normal is better and it doesn't change the sematics of
@status_change_nid)
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Rob Landley <rob@landley.net>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We use __free_page() to put a page to buddy system when onlining pages.
__free_page() will store NR_FREE_PAGES in zone's pcp.vm_stat_diff, so we
should allocate zone's pcp before onlining pages, otherwise we will lose
some free pages.

[mhocko@suse.cz: make zone_pcp_reset independent of MEMORY_HOTREMOVE]
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hwpoisoned may be set when we offline a page by the sysfs interface
/sys/devices/system/memory/soft_offline_page or
/sys/devices/system/memory/hard_offline_page. If we don't clear
this flag when onlining pages, this page can't be freed, and will
not in free list. So we can't offline these pages again. So we
should skip such page when offlining pages.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The pgmigrate_success and pgmigrate_fail vmstat counters tells the user
about migration activity but not the type or the reason. This patch adds
a tracepoint to identify the type of page migration and why the page is
being migrated.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>

"Asynchronous" is misspelled in some comments. No code changes.
Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Revert commit 7f1290f2 ("mm: fix-up zone present pages")

That patch tried to fix a issue when calculating zone->present_pages,
but it caused a regression on 32bit systems with HIGHMEM.  With that
change, reset_zone_present_pages() resets all zone->present_pages to
zero, and fixup_zone_present_pages() is called to recalculate
zone->present_pages when the boot allocator frees core memory pages into
buddy allocator.  Because highmem pages are not freed by bootmem
allocator, all highmem zones' present_pages becomes zero.

Various options for improving the situation are being discussed but for
now, let's return to the 3.6 code.

Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memory-hotplug: suppress "Trying to free nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning

When our x86 box calls __remove_pages(), release_mem_region() shows many
warnings.  And x86 box cannot unregister iomem_resource.

  "Trying to free nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>"

release_mem_region() has been changed to be called in each
PAGES_PER_SECTION by commit de7f0cba ("memory hotplug: release
memory regions in PAGES_PER_SECTION chunks").  Because powerpc registers
iomem_resource in each PAGES_PER_SECTION chunk.  But when I hot add
memory on x86 box, iomem_resource is register in each _CRS not
PAGES_PER_SECTION chunk.  So x86 box unregisters iomem_resource.

The patch fixes the problem.
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Nathan Fontenot <nfont@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

remove_memory() will be called when hot removing a memory device.  But
even if offlining memory, we cannot notice it.  So the patch updates the
memory block's state and sends notification to userspace.

Additionally, the memory device may contain more than one memory block.
If the memory block has been offlined, __offline_pages() will fail.  So we
should try to offline one memory block at a time.

Thus remove_memory() also check each memory block's state.  So there is no
need to check the memory block's state before calling remove_memory().
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

remove_memory() is called in two cases:
1. echo offline >/sys/devices/system/memory/memoryXX/state
2. hot remove a memory device

In the 1st case, the memory block's state is changed and the notification
that memory block's state changed is sent to userland after calling
remove_memory().  So user can notice memory block is changed.

But in the 2nd case, the memory block's state is not changed and the
notification is not also sent to userspcae even if calling
remove_memory().  So user cannot notice memory block is changed.

For adding the notification at memory hot remove, the patch just prepare
as follows:
1st case uses offline_pages() for offlining memory.
2nd case uses remove_memory() for offlining memory and changing memory block's
    state and notifing the information.

The patch does not implement notification to remove_memory().
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I think zone->present_pages indicates pages that buddy system can management,
it should be:

	zone->present_pages = spanned pages - absent pages - bootmem pages,

but is now:
	zone->present_pages = spanned pages - absent pages - memmap pages.

spanned pages: total size, including holes.
absent pages: holes.
bootmem pages: pages used in system boot, managed by bootmem allocator.
memmap pages: pages used by page structs.

This may cause zone->present_pages less than it should be.  For example,
numa node 1 has ZONE_NORMAL and ZONE_MOVABLE, it's memmap and other
bootmem will be allocated from ZONE_MOVABLE, so ZONE_NORMAL's
present_pages should be spanned pages - absent pages, but now it also
minus memmap pages(free_area_init_core), which are actually allocated from
ZONE_MOVABLE.  When offlining all memory of a zone, this will cause
zone->present_pages less than 0, because present_pages is unsigned long
type, it is actually a very large integer, it indirectly caused
zone->watermark[WMARK_MIN] becomes a large
integer(setup_per_zone_wmarks()), than cause totalreserve_pages become a
large integer(calculate_totalreserve_pages()), and finally cause memory
allocating failure when fork process(__vm_enough_memory()).

[root@localhost ~]# dmesg
-bash: fork: Cannot allocate memory

I think the bug described in

  http://marc.info/?l=linux-mm&m=134502182714186&w=2

is also caused by wrong zone present pages.

This patch intends to fix-up zone->present_pages when memory are freed to
buddy system on x86_64 and IA64 platforms.
Signed-off-by: NJianguo Wu <wujianguo@huawei.com>
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Reported-by: NPetr Tesarik <ptesarik@suse.cz>
Tested-by: NPetr Tesarik <ptesarik@suse.cz>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The changelog for commit 6a6dccba ("mm: cma: don't replace lowmem
pages with highmem") mentioned that lowmem pages can be replaced by
highmem pages during CMA migration.  6a6dccba fixed that issue.

Quote from that changelog:

:   The filesystem layer expects pages in the block device's mapping to not
:   be in highmem (the mapping's gfp mask is set in bdget()), but CMA can
:   currently replace lowmem pages with highmem pages, leading to crashes in
:   filesystem code such as the one below:
:
:     Unable to handle kernel NULL pointer dereference at virtual address 00000400
:     pgd = c0c98000
:     [00000400] *pgd=00c91831, *pte=00000000, *ppte=00000000
:     Internal error: Oops: 817 [#1] PREEMPT SMP ARM
:     CPU: 0    Not tainted  (3.5.0-rc5+ #80)
:     PC is at __memzero+0x24/0x80
:     ...
:     Process fsstress (pid: 323, stack limit = 0xc0cbc2f0)
:     Backtrace:
:     [<c010e3f0>] (ext4_getblk+0x0/0x180) from [<c010e58c>] (ext4_bread+0x1c/0x98)
:     [<c010e570>] (ext4_bread+0x0/0x98) from [<c0117944>] (ext4_mkdir+0x160/0x3bc)
:      r4:c15337f0
:     [<c01177e4>] (ext4_mkdir+0x0/0x3bc) from [<c00c29e0>] (vfs_mkdir+0x8c/0x98)
:     [<c00c2954>] (vfs_mkdir+0x0/0x98) from [<c00c2a60>] (sys_mkdirat+0x74/0xac)
:      r6:00000000 r5:c152eb40 r4:000001ff r3:c14b43f0
:     [<c00c29ec>] (sys_mkdirat+0x0/0xac) from [<c00c2ab8>] (sys_mkdir+0x20/0x24)
:      r6:beccdcf0 r5:00074000 r4:beccdbbc
:     [<c00c2a98>] (sys_mkdir+0x0/0x24) from [<c000e3c0>] (ret_fast_syscall+0x0/0x30)

Memory-hotplug has same problem as CMA has so the same fix can be applied
to memory-hotplug as well.

Fix it by reusing.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

online_pages() does build_all_zonelists() and zone_pcp_update(), I think
offline_pages() should do it too.

When the zone has no memory to allocate, remove it from other nodes'
zonelists.  zone_batchsize() depends on zone's present pages, if zone's
present pages are changed, zone's pcp should be updated.
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There may be a bug when registering section info.  For example, on my
Itanium platform, the pfn range of node0 includes the other nodes, so
other nodes' section info will be double registered, and memmap's page
count will equal to 3.

  node0: start_pfn=0x100,    spanned_pfn=0x20fb00, present_pfn=0x7f8a3, => 0x000100-0x20fc00
  node1: start_pfn=0x80000,  spanned_pfn=0x80000,  present_pfn=0x80000, => 0x080000-0x100000
  node2: start_pfn=0x100000, spanned_pfn=0x80000,  present_pfn=0x80000, => 0x100000-0x180000
  node3: start_pfn=0x180000, spanned_pfn=0x80000,  present_pfn=0x80000, => 0x180000-0x200000

  free_all_bootmem_node()
	register_page_bootmem_info_node()
		register_page_bootmem_info_section()

When hot remove memory, we can't free the memmap's page because
page_count() is 2 after put_page_bootmem().

  sparse_remove_one_section()
	free_section_usemap()
		free_map_bootmem()
			put_page_bootmem()

[akpm@linux-foundation.org: add code comment]
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a zone becomes empty after memory offlining, free zone->pageset.
Otherwise it will cause memory leak when adding memory to the empty zone
again because build_all_zonelists() will allocate zone->pageset for an
empty zone.
Signed-off-by: NJiang Liu <liuj97@gmail.com>
Signed-off-by: NWei Wang <Bessel.Wang@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Keping Chen <chenkeping@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When online_pages() is called to add new memory to an empty zone, it
rebuilds all zone lists by calling build_all_zonelists().  But there's a
bug which prevents the new zone to be added to other nodes' zone lists.

online_pages() {
	build_all_zonelists()
	.....
	node_set_state(zone_to_nid(zone), N_HIGH_MEMORY)
}

Here the node of the zone is put into N_HIGH_MEMORY state after calling
build_all_zonelists(), but build_all_zonelists() only adds zones from
nodes in N_HIGH_MEMORY state to the fallback zone lists.
build_all_zonelists()

    ->__build_all_zonelists()
	->build_zonelists()
	    ->find_next_best_node()
		->for_each_node_state(n, N_HIGH_MEMORY)

So memory in the new zone will never be used by other nodes, and it may
cause strange behavor when system is under memory pressure.  So put node
into N_HIGH_MEMORY state before calling build_all_zonelists().
Signed-off-by: NJianguo Wu <wujianguo@huawei.com>
Signed-off-by: NJiang Liu <liuj97@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Keping Chen <chenkeping@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When hotadd_new_pgdat() is called to create new pgdat for a new node, a
fallback zonelist should be created for the new node.  There's code to try
to achieve that in hotadd_new_pgdat() as below:

	/*
	 * The node we allocated has no zone fallback lists. For avoiding
	 * to access not-initialized zonelist, build here.
	 */
	mutex_lock(&zonelists_mutex);
	build_all_zonelists(pgdat, NULL);
	mutex_unlock(&zonelists_mutex);

But it doesn't work as expected.  When hotadd_new_pgdat() is called, the
new node is still in offline state because node_set_online(nid) hasn't
been called yet.  And build_all_zonelists() only builds zonelists for
online nodes as:

        for_each_online_node(nid) {
                pg_data_t *pgdat = NODE_DATA(nid);

                build_zonelists(pgdat);
                build_zonelist_cache(pgdat);
        }

Though we hope to create zonelist for the new pgdat, but it doesn't.  So
add a new parameter "pgdat" the build_all_zonelists() to build pgdat for
the new pgdat too.
Signed-off-by: NJiang Liu <liuj97@gmail.com>
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Keping Chen <chenkeping@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We should goto error to release memory resource if hotadd_new_pgdat()
failed.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>