- 22 9月, 2006 8 次提交
-
-
由 Linas Vepstas 提交于
On detection of an EEH error, some Power4 systems seem to occasionally want to be reset twice before they report themselves as fully recovered. This patch re-arranges the code to attempt additional resets if the first one doesn't take. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Scott Wood 提交于
This patch causes fsl_soc.h to import the definition of phys_addr_t itself, rather than relying on its includer to do so. Signed-off-by: NScott Wood <scott@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Lynch 提交于
Noticed that the U3_*CFA macros have some typos: #define U3_HT_CFA0(devfn, off) \ ((((unsigned long)devfn) << 8) | offset) (refers to offset rather than off) #define U3_AGP_CFA0(devfn, off) \ ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ (refers to dev_fn rather than devfn) Things happen to work, but there doesn't seem to be any reason these shouldn't be functions. Overall behavior should be unchanged. Signed-off-by: NNathan Lynch <ntl@pobox.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Lynch 提交于
When there is a PCI-X mode 2 capable device behind the HT<->PCI-X bridge, the pci core decides that the device has the extended 4K config space, even though the bus is not operating in mode 2. This is because the u3_ht pci ops silently accept offsets greater than 255 but use only the 8 least significant bits, which means reading at offset 0x100 gets the data at offset 0x0, and causes confusion for lspci. Reject accesses to configuration space offsets greater than 255. Signed-off-by: NNathan Lynch <ntl@pobox.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Scott Wood 提交于
This patch fixes the assignment of pending registers to IRQ numbers for the IPIC; the code previously assigned all IRQs to the high pending word regardless of which word the interrupt belonged to. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Arnd Bergmann 提交于
Ulrich Weigand found a bug with the current version of the asm-powerpc/ptrace.h that prevents building at least the SPU target version of gdb, since some ptrace opcodes are not defined. The problem seems to have originated in the merging of 32 and 64 bit versions of that file, the problem is that some opcodes are only valid on 64 bit kernels, but are also used by 32 bit programs, so they can't depends on the __powerpc64__ symbol. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
This looks like cruft to me, these functions don't exist AFAICT, and I can't see that it's possible to even enable DISCONTIGMEM on powerpc anymore. CC'ing some folks who might know better, based on the who-touched-it-last principle. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
This patch changes the io operations so that they are out of line if CONFIG_PPC_ISERIES is set and includes a firmware feature check in that case. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 21 9月, 2006 8 次提交
-
-
由 Josh Boyer 提交于
This fixes some debug register defines on PPC 40x that were incorrect. Signed-off-by: NJosh Boyer <jdub@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Amy Fong 提交于
The following fixes compile errors in sbc8560. Signed-off-by: NAmy Fong <amy.fong@windriver.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linas Vepstas 提交于
Update to the PowerPC PCI error recovery code. Add code to enable MMIO if a device driver reports that it is capable of recovering on its own. One anticipated use of this having a device driver enable MMIO so that it can take a register dump, which might then be followed by the device driver requesting a full reset. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linas Vepstas 提交于
Add wrapper around the rtas call to enable MMIO or DMA on a frozen pci slot. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linas Vepstas 提交于
Clean up subroutine documentation; mostly formatting changes, with some new content. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linas Vepstas 提交于
This corrects a pci_dev get/put imbalance that can occur only in highly unlikely situations (kmalloc failures, pci devices with overlapping resource addresses). No actual failures seen, this was spotted during code review. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Josh Boyer 提交于
The stack frame address was being printed incorrectly in the backtrace option of XMON on PPC. This patch fixes it to print the actual stack address instead of the address of the local variable that contains it. Signed-off-by: NJosh Boyer <jdub@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Peter Bergner 提交于
Jakub noticed the cputable.c entry for Xilinx Virtex-4 FX was missing a .platform value, so the AT_PLATFORM value wouldn't be set correctly. This adds it. Signed-off-by: NPeter Bergner <bergner@vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 20 9月, 2006 9 次提交
-
-
由 Mark A. Greer 提交于
This abstracts the operations used in the bootwrapper, and defines the operations needed for the bootwrapper to run on an OF platform. The operations have been divided up into platform ops (platform_ops), firmware ops (fw_ops), device tree ops (dt_ops), and console ops (console_ops). The proper operations will be hooked up at runtime to provide the functionality that you need. Signed-off-by: NMark A. Greer <mgreer@mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
There are various places where we want to extract an unsigned long value from a device-tree property that can be 1 or 2 cells in length. This replaces some open-coded calculations, and one place where we assumed without checking that properties were the length we wanted, with a little of_read_ulong() helper. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Copy and paste bug in io.h Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
This produces essentially the same code and will make the iSeries i/o consolidation easier. The count parameter is changed to long since that will produce the same (better) code on 32 and 64 bit builds. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
_insw, _outsw, _insl amd _outsl are all unused, so remove them. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
The io accessors insw_ns, outsw_ns, insl_ns and outsl_ns are unused (except for one unnecessary use in drivers/net/3c509.c that is addressed in a previous patch) and are only defined in powerpc/ppc, so remove them. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
Left over from the constifying of get_property. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Stephen Rothwell 提交于
If we build a pSeries/iSeries combined kernel, we will need this. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
- 14 9月, 2006 3 次提交
-
-
由 Kim Phillips 提交于
Fix MPC8349EMDS dts PCI interrupt-map values for IDSEL 0x18 per Tanya's catch. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NTanya Jiang <tanya.jiang@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
This fixes a compile error that only surfaces on CONFIG_SMP=n builds; <asm/hvcall.h> seems to get pulled in through another header file for SMP builds. This problem was introduced by the hvcall stats patch. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
-
- 13 9月, 2006 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix G5 DART (IOMMU) race causing occasional data corruption [POWERPC] Fix MMIO ops to provide expected barrier behaviour [POWERPC] Fix interrupt clearing in kdump shutdown sequence [POWERPC] update prep_defconfig [POWERPC] kdump: Support kernels having 64k page size. [POWERPC] Implement PowerPC futex_atomic_cmpxchg_inatomic(). [POWERPC] Add new, missing argument to of_irq_map_raw() for 86xx. [POWERPC] Update defconfigs
-
由 Mike Miller 提交于
Add support for new hardware and bumps the version to 3.6.10. It seems there were several changes introduced including soft_irq. I decided to bump the major number to reflect these changes. Since we're still supporting older vendor kernels I need some way differentiate between kernel versions <=2.6.10 and newer kernels >=2.6.16. Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Woodhouse 提交于
MIPS asm/page.h unconditionally includes <asm-generic/memory_model.h>, which doesn't exist in userspace. Move an #endif /* __KERNEL__ */ down a few lines to prevent that. Also, remove the broken definition of PAGE_SIZE which is never going to be correct -- in the absence of PAGE_SIZE, non-broken userspace will fall back to using sysconf() or getpagesize() instead. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Woodhouse 提交于
The header file <linux/pfn.h> doesn't exist in userspace and probably shouldn't -- but it's used unconditionally in <asm-i386/setup.h>. Protect it with #ifdef __KERNEL__ and move setup.h from $(header-y) to $(unifdef-y) in Kbuild accordingly. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Woodhouse 提交于
Some files which don't exist in userspace were being included unconditionally in asm-i386/elf.h. Move the offending #includes down a few lines so that they're protected by #ifdef __KERNEL__ In fact, we probably want to kill off all userspace use of asm/elf.h -- but we aren't there yet, so we should at least make it possible to include it for now. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Woodhouse 提交于
Because <linux/linkage.h> doesn't exist in userspace, it should be only included from within #ifdef __KERNEL__. Move the corresponding #include Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Woodhouse 提交于
There's useful stuff in <linux/timex.h> but <asm/timex.h> has nothing for userspace. Stop exporting it, and include it only from within the existing #ifdef __KERNEL__ part of <linux/timex.h> This fixes a 'make headers_check' failure on i386 because asm-i386/timex.h includes both asm-i386/tsc.h and asm-i386/processor.h, neither of which are exported to userspace. It's not entirely clear _why_ it includes either of these, but it does. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Woodhouse 提交于
We don't need any of this crap included from the user-visible part of nfs_fs.h -- remove it all. In fact, we probably don't need anything but NFS_SUPER_MAGIC to be defined; is there any need for anything else? And magic numbers should probably move to <linux/magic.h> rather than being strewn across various fs-specific include files which exist in userspace for solely that purpose. With this patch, 'make header_check' works again at least on PowerPC. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
The following combinations of pp-tokens are used #include #include # include so, script'd better check for all of them. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeremy Fitzhardinge 提交于
Claim an ID number for Xen in the LOADER_TYPE field. Also, keep the table in zero-page.txt consistent with boot.txt. [hpa says: 6 was skipped because I couldn't rule out that it hadn't been unofficially used. It seemed easier to skip it for now.] Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oleg Nesterov 提交于
rcu_do_batch() decrements rdp->qlen with irqs enabled. This is not good, it can also be modified by call_rcu() from interrupt. Decrement ->qlen once with irqs disabled, after a main loop. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-