- 07 11月, 2011 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83627ehf) Fix broken driver init hwmon: (coretemp) Fix for non-SMP builds
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Revert the check of NO_PRESENCE pincfg default bit ALSA: hda - Fix a regression for DMA-position check with CA0110 ALSA: hda - Fix silent output regression with ALC861 ALSA: control: remove compilation warning on 32-bit ALSA: ua101: fix crash when unplugging
-
由 Guenter Roeck 提交于
Commit 2265cef2 (hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types) results in kernel panic if data->temp_label was not initialized. The problem was found with chip W83627DHG-P. Add check if data->temp->label was set before use. Based on incomplete patch by Alexander Beregalov. Reported-by: NAlexander Beregalov <a.beregalov@gmail.com> Tested-by: NAlexander Beregalov <a.beregalov@gmail.com> Cc: stable@kernel.org Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The definition of TO_ATTR_NO in the non-SMP case is wrong. As the SMP definition resolves to the correct value, just use this for both cases. Without this fix the temperature attributes are named temp0_* instead of temp2_*, so libsensors won't pick them. Broken since kernel 3.0. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NPhil Sutter <phil@nwl.cc> Cc: stable@kernel.org Acked-by: NDurgadoss R <Durgadoss.r@intel.com> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 06 11月, 2011 20 次提交
-
-
由 Takashi Iwai 提交于
The implementation on commit [08a1f5eb: ALSA: hda - Check NO_PRESENCE pincfg default bit] seems like a mis-interpretation of specification. The spec gives the reversed bit definition. But, following the spec also causes to change so many existing device configurations, thus we can't change it so easily for now. For 3.2-rc1, it's safer to revert this check (actually this patch comments out the code). We may re-introduced the fixed version once after the wider test-case coverages are done. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The regression-fix in 3.1 for the check of DMA-position validity caused yet another regression for CA0110. As usual, this hardware seems working only with LPIB properly. Adding the appropriate driver-caps bit to force LPIB fixes the problem. Reported-and-tested-by: NAndres Freund <andres@anarazel.de> Cc: <stable@kernel.org> [v3.1] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The 3.1 kernel has a regression for ALC861 codec where no sound output is heard with the default setup. It's because the amps in DACs aren't properly unmuted while the output mixers are assigned only to pins. This patch fixes the missing initialization of DACs when no mixer is assigned to them. Tested-by: NAndrea Iob <andrea_iob@yahoo.it> Cc: <stable@kernel.org> [v3.1+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Olof Johansson 提交于
This was introduced by 'ALSA: control: add support for ENUMERATED user space controls' which adds a u64 variable that gets cast to a pointer: sound/core/control.c: In function 'snd_ctl_elem_init_enum_names': sound/core/control.c:1089: warning: cast to pointer from integer of different size Cast to uintptr_t before casting to pointer to avoid the warning. Signed-off-by: NOlof Johansson <olof@lixom.net> [cl: replace long with uintptr_t] Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
If the device is unplugged while running, it is possible for a PCM device to be closed after the disconnect callback has returned. This means that kill_stream_urb() and disable_iso_interface() would try to access already-invalid or freed USB data structures. The function free_usb_related_resources() was intended to prevent this, but forgot to clear the affected variables. Reported-and-tested-by: NOlivier Courtay <olivier@courtay.org> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: 2.6.33+ <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://git.linaro.org/people/arnd/arm-soc由 Linus Torvalds 提交于
* 'next/devel2' of git://git.linaro.org/people/arnd/arm-soc: (30 commits) ARM: mmp: register internal sram bank ARM: mmp: register audio sram bank ARM: mmp: add sram allocator gpio/samsung: Complain loudly if we don't know the SoC ARM: S3C64XX: Fix SoC identification for S3C64xx devices ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks ARM: S3C24XX: Add devname for hsmmc1 pclk ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks ARM: S3C2443: Accommodate cpufreq frequency scheme in armdiv ARM: S3C2443: handle unset armdiv values gracefully ARM: S3C2443: Add get_rate operation for clk_armdiv ARM: S3C2416: Add comment describing the armdiv/armclk ARM: S3C2443: Move clk_arm and clk_armdiv to common code ARM: S3C24XX: Add infrastructure to transmit armdiv to common code ARM: S3C2416: Add armdiv_mask constant ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board ARM: EXYNOS4: Enable MFC on ORIGEN ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450 ARM: SAMSUNG: Add support s3c2443-adc for S3C2443 ARM: SAMSUNG: Allow overriding of adc device name for S3C24XX ...
-
git://git.linaro.org/people/arnd/arm-soc由 Linus Torvalds 提交于
* 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-soc: (79 commits) ARM: SAMSUNG: Move fimc plat. device from board files to plat-samsung ARM: SAMSUNG: Cleanup resources by using macro ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h ARM: S5P: To merge devs.c files to one devs.c ARM: S3C64XX: To merge devs.c files to one devs.c ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c ARM: S5P64X0: Add Power Management support ARM: S5P: Make the sleep code common for S5P series SoCs ARM: S5P: Make the common S5P PM code conditionally compile ARM: SAMSUNG: Move S5P header files to plat-samsung ARM: SAMSUNG: Move S3C24XX header files to plat-samsung ARM: SAMSUNG: Moving each SoC support header files ARM: SAMSUNG: Consolidate plat/pll.h ARM: SAMSUNG: Consolidate plat/pwm-clock.h ARM: SAMSUNG: Cleanup mach/clkdev.h ARM: SAMSUNG: remove sdhci default configuration setup platform helper ARM: EXYNOS4: Add FIMC device on SMDKV310 board ARM: EXYNOS4: Add header file protection macros ARM: EXYNOS4: Add usb ehci device to the SMDKV310 ARM: S3C2443: Add hsspi-clock from pclk and rename S3C2443 hsspi sclk ... Fix up conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} ARM_CPU_SUSPEND, various random device tables (gah!) - drivers/gpio/Makefile sa1100 gpio added, samsung gpio drivers merged
-
由 Tyler Hicks 提交于
Update my email address in MAINTAINERS. Signed-off-by: NTyler Hicks <tyhicks@canonical.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Freezer: Revert 27920651 "PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too" PM / Freezer: Reimplement wait_event_freezekillable using freezer_do_not_count/freezer_count USB: Update last_busy time after autosuspend fails PM / Runtime: Automatically retry failed autosuspends PM / QoS: Remove redundant check PM / OPP: Fix build when CONFIG_PM_OPP is not set PM / Runtime: Fix runtime accounting calculation error PM / Sleep: Update freezer documentation PM / Sleep: Remove unused symbol 'suspend_cpu_hotplug' PM / Sleep: Fix race between CPU hotplug and freezer ACPI / PM: Add Sony VPCEB17FX to nonvs blacklist
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
* git://www.linux-watchdog.org/linux-watchdog: watchdog: Convert wm831x driver to watchdog core watchdog: s3c2410: convert to use the watchdog framework Documentation: watchdog: add guide how to convert drivers to new framework watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing watchdog: Add WDIOC_GETTIMELEFT ioctl support to w83627 watchdog driver watchdog: irq: Remove IRQF_DISABLED watchdog: Octeon: Mark octeon_wdt interrupt as IRQF_NO_THREAD watchdog: sc520_wdt: Remove unnecessary cast.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits) [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev [SCSI] scsi_dh_alua: Fix the time inteval for alua rtpg commands [SCSI] scsi_transport_iscsi: Fix documentation os parameter [SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 support [SCSI] libfc: improve flogi retries to avoid lport stuck [SCSI] libfc: avoid exchanges collision during lport reset [SCSI] libfc: fix checking FC_TYPE_BLS [SCSI] edd: Treat "XPRS" host bus type the same as "PCI" [SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user) [SCSI] isci: revert bcn filtering [SCSI] isci: Fix hard reset timeout conditions. [SCSI] isci: No need to manage the pending reset bit on pending requests. [SCSI] isci: Remove redundant isci_request.ttype field. [SCSI] isci: Fix task management for SMP, SATA and on dev remove. [SCSI] isci: No task_done callbacks in error handler paths. [SCSI] isci: Handle task request timeouts correctly. [SCSI] isci: Fix tag leak in tasks and terminated requests. [SCSI] isci: Immediately fail I/O to removed devices. [SCSI] isci: Lookup device references through requests in completions. [SCSI] ipr: add definitions for additional adapter ...
-
由 Mark Brown 提交于
Fairly large code churn but not much doing with that and the overall result is a definite win. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Wolfram Sang 提交于
Make this driver a user of the watchdog framework and remove now centrally handled parts. Tested on a mini2440. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Wim Van Sebroeck 提交于
Redhat Bugzilla: Bug 727875 - TCO_EN bit is disabled by TCO driver Jiri Slaby: 28d41f53 broke temperature sensors on a ICH10 chipset The iTCO_wdt driver disables the SMI. This breaks good working of newer hardware. The disabling of the SMI by the TCO logic dates back from the i810-tco driver from Nils Faerber (around 28 July 2000). The reason for this was that some BIOSes install handlers reset or disable the watchdog timer instead of resetting the system. The trick to fix this was to disable the SMI (by clearing the SMI_TCO_EN bit of the SMI_EN register) to prevent this from happening. This however has strange effects on newer hardware. So we are in a situation that a fix for broken old hardware affects newer hardware. The correct solution is to make this fix an option (with the new module parameter: turn_SMI_watchdog_clear_off) so that the default behaviour is the unfixed version. the next patch will be to move this in the start and stop functions of the driver and to add a new module parameter for the global_smi_en bit and to get rid of the vendor_support code. This fix can have an effect on old (typical ICH & ICH2 chipsets) motherboards that have a broken BIOS implementation concerning TCO logic. In these case the module parameter turn_SMI_watchdog_clear_off=1 will need to be added. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Greg Lee 提交于
Add WDIOC_GETTIMELEFT ioctl allowing you to check how much time is left on the watchdog counter before a reset occurs. Signed-off-by: Greg Lee <glee [at] swspec.com> Signed-off-by: NPadraig Brady <P@draigbrady.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@google.com>
-
由 Yong Zhang 提交于
This flag is a NOOP and can be removed now. Signed-off-by: NYong Zhang <yong.zhang0@gmail.com> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Venkat Subbiah 提交于
This is to exclude it from force threading to allow RT patch set to work. The watchdog timers are per-CPU and the addresses of register that reset the timer are calculated based on the current CPU. Therefore we cannot allow it to run on a thread on a different CPU. Also we only do a single register write, which is much faster than scheduling a handler thread. And while on this line remove IRQF_DISABLED as this flag is a NOP. Signed-off-by: Venkat Subbiah<venkat.subbiah@cavium.com> Acked-by: David Daney<david.daney@cavium.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Sean Young 提交于
Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Kukjin Kim 提交于
The mark of conflict should be removed. This happened at the commit fba95699 ("Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma") Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> [ I always check the conflict resolution with "git diff" before I add the result, but I clearly missed that this time, and didn't notice the second conflict in that file after having fixed the first one. Oops, my bad. - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 11月, 2011 16 次提交
-
-
由 Dan McGee 提交于
No one in their right mind would expect statfs() to not work on a automounter managed mount point. Fix it. [ I'm not sure about the "no one in their right mind" part. It's not mounted, and you didn't ask for it to be mounted. But nobody will really care, and this probably makes it match previous semantics, so.. - Linus ] This mirrors the fix made to the quota code in 815d405c. Signed-off-by: NDan McGee <dpmcgee@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits) virtio-blk: use ida to allocate disk index hpsa: add small delay when using PCI Power Management to reset for kump cciss: add small delay when using PCI Power Management to reset for kump xen/blkback: Fix two races in the handling of barrier requests. xen/blkback: Check for proper operation. xen/blkback: Fix the inhibition to map pages when discarding sector ranges. xen/blkback: Report VBD_WSECT (wr_sect) properly. xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests. xen-blkfront: plug device number leak in xlblk_init() error path xen-blkfront: If no barrier or flush is supported, use invalid operation. xen-blkback: use kzalloc() in favor of kmalloc()+memset() xen-blkback: fixed indentation and comments xen-blkfront: fix a deadlock while handling discard response xen-blkfront: Handle discard requests. xen-blkback: Implement discard requests ('feature-discard') xen-blkfront: add BLKIF_OP_DISCARD and discard request struct drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd() drivers/block/loop.c: emit uevent on auto release drivers/block/cpqarray.c: use pci_dev->revision loop: always allow userspace partitions and optionally support automatic scanning ... Fic up trivial header file includsion conflict in drivers/block/loop.c
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next: Squashfs: Add an option to set dev block size to 4K
-
由 Tejun Heo 提交于
PM / Freezer: Revert 27920651 "PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too" Commit 27920651 "PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too" updated fake_signal_wake_up() used by freezer to wake up KILLABLE tasks. Sending unsolicited wakeups to tasks in killable sleep is dangerous as there are code paths which depend on tasks not waking up spuriously from KILLABLE sleep. For example. sys_read() or page can sleep in TASK_KILLABLE assuming that wait/down/whatever _killable can only fail if we can not return to the usermode. TASK_TRACED is another obvious example. The previous patch updated wait_event_freezekillable() such that it doesn't depend on the spurious wakeup. This patch reverts the offending commit. Note that the spurious KILLABLE wakeup had other implicit effects in KILLABLE sleeps in nfs and cifs and those will need further updates to regain freezekillable behavior. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Oleg Nesterov 提交于
Commit 27920651 "PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too" updated fake_signal_wake_up() used by freezer to wake up KILLABLE tasks. Sending unsolicited wakeups to tasks in killable sleep is dangerous as there are code paths which depend on tasks not waking up spuriously from KILLABLE sleep. For example. sys_read() or page can sleep in TASK_KILLABLE assuming that wait/down/whatever _killable can only fail if we can not return to the usermode. TASK_TRACED is another obvious example. The offending commit was to resolve freezer hang during system PM operations caused by KILLABLE sleeps in network filesystems. wait_event_freezekillable(), which depends on the spurious KILLABLE wakeup, was added by f06ac72e "cifs, freezer: add wait_event_freezekillable and have cifs use it" to be used to implement killable & freezable sleeps in network filesystems. To prepare for reverting of 27920651, this patch reimplements wait_event_freezekillable() using freezer_do_not_count/freezer_count() so that it doesn't depend on the spurious KILLABLE wakeup. This isn't very nice but should do for now. [tj: Refreshed patch to apply to linus/master and updated commit description on Rafael's request.] Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Alan Stern 提交于
Originally, the runtime PM core would send an idle notification whenever a suspend attempt failed. The idle callback routine could then schedule a delayed suspend for some time later. However this behavior was changed by commit f71648d7 (PM / Runtime: Remove idle notification after failing suspend). No notifications were sent, and there was no clear mechanism to retry failed suspends. This caused problems for the usbhid driver, because it fails autosuspend attempts as long as a key is being held down. A companion patch changes the PM core's behavior, but we also need to change the USB core. In particular, this patch (as1493) updates the device's last_busy time when an autosuspend fails, so that the PM core will retry the autosuspend in the future when the delay time expires again. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Tested-by: NHenrik Rydberg <rydberg@euromail.se> Cc: <stable@kernel.org> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Alan Stern 提交于
Originally, the runtime PM core would send an idle notification whenever a suspend attempt failed. The idle callback routine could then schedule a delayed suspend for some time later. However this behavior was changed by commit f71648d7 (PM / Runtime: Remove idle notification after failing suspend). No notifications were sent, and there was no clear mechanism to retry failed suspends. This caused problems for the usbhid driver, because it fails autosuspend attempts as long as a key is being held down. Therefore this patch (as1492) adds a mechanism for retrying failed autosuspends. If the callback routine updates the last_busy field so that the next autosuspend expiration time is in the future, the autosuspend will automatically be rescheduled. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Tested-by: NHenrik Rydberg <rydberg@euromail.se> Cc: <stable@kernel.org> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Guennadi Liakhovetski 提交于
Remove an "if" check, that repeats an equivalent one 6 lines above. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Tony Lindgren 提交于
Commit 03ca370f (PM / OPP: Add OPP availability change notifier) does not compile if CONFIG_PM_OPP is not set: arch/arm/plat-omap/omap-pm-noop.o: In function `opp_get_notifier': include/linux/opp.h:103: multiple definition of `opp_get_notifier' include/linux/opp.h:103: first defined here Also fix incorrect comment. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 venu byravarasu 提交于
With delta type being int, its value is made zero for all values of now > 0x80000000. Hence fixing it. Signed-off-by: Nvenu byravarasu <vbyravarasu@nvidia.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Srivatsa S. Bhat 提交于
This patch: * Substitutes some obsolete references to kernel/power/process.c by kernel/freezer.c. * Mentions kernel/freezer.c as being part of the "freezer" code along with the rest of the files. * Fixes a trivial typo. Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Srivatsa S. Bhat 提交于
Remove the suspend_cpu_hotplug declaration, which doesn't correspond to an existing variable. [rjw: Added the changelog.] Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Srivatsa S. Bhat 提交于
The CPU hotplug notifications sent out by the _cpu_up() and _cpu_down() functions depend on the value of the 'tasks_frozen' argument passed to them (which indicates whether tasks have been frozen or not). (Examples for such CPU hotplug notifications: CPU_ONLINE, CPU_ONLINE_FROZEN, CPU_DEAD, CPU_DEAD_FROZEN). Thus, it is essential that while the callbacks for those notifications are running, the state of the system with respect to the tasks being frozen or not remains unchanged, *throughout that duration*. Hence there is a need for synchronizing the CPU hotplug code with the freezer subsystem. Since the freezer is involved only in the Suspend/Hibernate call paths, this patch hooks the CPU hotplug code to the suspend/hibernate notifiers PM_[SUSPEND|HIBERNATE]_PREPARE and PM_POST_[SUSPEND|HIBERNATE] to prevent the race between CPU hotplug and freezer, thus ensuring that CPU hotplug notifications will always be run with the state of the system really being what the notifications indicate, _throughout_ their execution time. Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Dave Jones 提交于
Another entry for the nonvs blacklist, as noted by a user in https://bugzilla.redhat.com/show_bug.cgi?id=641789#c12Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-