- 26 8月, 2014 3 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas Pull SH driver fix from Simon Horman: "Confine SH_INTC to platforms that need it" * tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: sh: intc: Confine SH_INTC to platforms that need it
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Pretty much all across the field so with this we should be in reasonable shape for the upcoming -rc2" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: OCTEON: make get_system_type() thread-safe MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init' MIPS: EVA: Add new EVA header MIPS: scall64-o32: Fix indirect syscall detection MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64 MIPS: Loongson: Fix COP2 usage for preemptible kernel MIPS: NL: Fix nlm_xlp_defconfig build error MIPS: Remove race window in page fault handling MIPS: Malta: Improve system memory detection for '{e, }memsize' >= 2G MIPS: Alchemy: Fix db1200 PSC clock enablement MIPS: BCM47XX: Fix reboot problem on BCM4705/BCM4785 MIPS: Remove duplicated include from numa.c MIPS: Add common plat_irq_dispatch declaration MIPS: MSP71xx: remove unused plat_irq_dispatch() argument MIPS: GIC: Remove useless parens from GICBIS(). MIPS: perf: Mark pmu interupt IRQF_NO_THREAD
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull fix for ftrace function tracer/profiler conflict from Steven Rostedt: "The rewrite of the ftrace code that makes it possible to allow for separate trampolines had a design flaw with the interaction between the function and function_graph tracers. The main flaw was the simplification of the use of multiple tracers having the same filter (like function and function_graph, that use the set_ftrace_filter file to filter their code). The design assumed that the two tracers could never run simultaneously as only one tracer can be used at a time. The problem with this assumption was that the function profiler could be implemented on top of the function graph tracer, and the function profiler could run at the same time as the function tracer. This caused the assumption to be broken and when ftrace detected this failed assumpiton it would spit out a nasty warning and shut itself down. Instead of using a single ftrace_ops that switches between the function and function_graph callbacks, the two tracers can again use their own ftrace_ops. But instead of having a complex hierarchy of ftrace_ops, the filter fields are placed in its own structure and the ftrace_ops can carefully use the same filter. This change took a bit to be able to allow for this and currently only the global_ops can share the same filter, but this new design can easily be modified to allow for any ftrace_ops to share its filter with another ftrace_ops. The first four patches deal with the change of allowing the ftrace_ops to share the filter (and this needs to go to 3.16 as well). The fifth patch fixes a bug that was also caused by the new changes but only for archs other than x86, and only if those archs implement a direct call to the function_graph tracer which they do not do yet but will in the future. It does not need to go to stable, but needs to be fixed before the other archs update their code to allow direct calls to the function_graph trampoline" * tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Use current addr when converting to nop in __ftrace_replace_code() ftrace: Fix function_profiler and function tracer together ftrace: Fix up trampoline accounting with looping on hash ops ftrace: Update all ftrace_ops for a ftrace_hash_ops update ftrace: Allow ftrace_ops to use the hashes from other ops
-
- 25 8月, 2014 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "A couple of EFI fixes, plus misc fixes all around the map" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm64: Store Runtime Services revision firmware: Do not use WARN_ON(!spin_is_locked()) x86_32, entry: Clean up sysenter_badsys declaration x86/doc: Fix the 'tlb_single_page_flush_ceiling' sysconfig path x86/mm: Fix sparse 'tlb_single_page_flush_ceiling' warning and make the variable read-mostly x86/mm: Fix RCU splat from new TLB tracepoints
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "A kprobes and a perf compat ioctl fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Handle compat ioctl kprobes: Skip kretprobe hit in NMI context to avoid deadlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A collection of fixes from this week, it's been pretty quiet and nothing really stands out as particularly noteworthy here -- mostly minor fixes across the field: - ODROID booting was fixed due to PMIC interrupts missing in DT - a collection of i.MX fixes - minor Tegra fix for regulators - Rockchip fix and addition of SoC-specific mailing list to make it easier to find posted patches" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Fix warning message ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies MAINTAINERS: add new Rockchip SoC list ARM: dts: rockchip: readd missing mmc0 pinctrl settings ARM: dts: ODROID i2c improvements ARM: dts: Enable PMIC interrupts on ODROID ARM: dts: imx6sx: fix the pad setting for uart CTS_B ARM: dts: i.MX53: fix apparent bug in VPU clks ARM: imx: correct gpu2d_axi and gpu3d_axi clock setting ARM: dts: imx6: edmqmx6: change enet reset pin ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions. ARM: imx: remove unnecessary ARCH_HAS_OPP select ARM: imx: fix TLB missing of IOMUXC base address during suspend ARM: imx6: fix SMP compilation again ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull gpio fixes from Linus Walleij: - a largeish fix for the IRQ handling in the new Zynq driver. The quite verbose commit message gives the exact details. - move some defines for gpiod flags outside an ifdef to make stub functions work again. - various minor fixes that we can accept for -rc1. * tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio-lynxpoint: enable input sensing in resume gpio: move GPIOD flags outside #ifdef gpio: delete unneeded test before of_node_put gpio: zynq: Fix IRQ handlers gpiolib: devres: use correct structure type name in sizeof MAINTAINERS: Change maintainer for gpio-bcm-kona.c
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Intel and radeon fixes. Post KS/LC git requests from i915 and radeon stacked up. They are all fixes along with some new pci ids for radeon, and one maintainers file entry. - i915: display fixes and irq fixes - radeon: pci ids, and misc gpuvm, dpm and hdp cache" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits) MAINTAINERS: Add entry for Renesas DRM drivers drm/radeon: add additional SI pci ids drm/radeon: add new bonaire pci ids drm/radeon: add new KV pci id Revert "drm/radeon: Use write-combined CPU mappings of ring buffers with PCIe" drm/radeon: fix active_cu mask on SI and CIK after re-init (v3) drm/radeon: fix active cu count for SI and CIK drm/radeon: re-enable selective GPUVM flushing drm/radeon: Sync ME and PFP after CP semaphore waits v4 drm/radeon: fix display handling in radeon_gpu_reset drm/radeon: fix pm handling in radeon_gpu_reset drm/radeon: Only flush HDP cache for indirect buffers from userspace drm/radeon: properly document reloc priority mask drm/i915: don't try to retrain a DP link on an inactive CRTC drm/i915: make sure VDD is turned off during system suspend drm/i915: cancel hotplug and dig_port work during suspend and unload drm/i915: fix HPD IRQ reenable work cancelation drm/i915: take display port power domain in DP HPD handler drm/i915: Don't try to enable cursor from setplane when crtc is disabled drm/i915: Skip load detect when intel_crtc->new_enable==true ...
-
由 Benjamin LaHaise 提交于
As reported by Dan Aloni, commit f8567a38 ("aio: fix aio request leak when events are reaped by userspace") introduces a regression when user code attempts to perform io_submit() with more events than are available in the ring buffer. Reverting that commit would reintroduce a regression when user space event reaping is used. Fixing this bug is a bit more involved than the previous attempts to fix this regression. Since we do not have a single point at which we can count events as being reaped by user space and io_getevents(), we have to track event completion by looking at the number of events left in the event ring. So long as there are as many events in the ring buffer as there have been completion events generate, we cannot call put_reqs_available(). The code to check for this is now placed in refill_reqs_available(). A test program from Dan and modified by me for verifying this bug is available at http://www.kvack.org/~bcrl/20140824-aio_bug.c . Reported-by: NDan Aloni <dan@kernelim.com> Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org> Acked-by: NDan Aloni <dan@kernelim.com> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: stable@vger.kernel.org # v3.16 and anything that f8567a38 was backported to Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pawel Moll 提交于
A message warning a user about wrong vc value was printing out port instead. Reported-by: NDrew Richardson <drew.richardson@arm.com> Signed-off-by: NPawel Moll <pawel.moll@arm.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Geert Uytterhoeven 提交于
On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts refers to non-existent pinmux configuration data: pinmux core: sh-pfc does not support function i2c6 sh-pfc e6060000.pfc: invalid function i2c6 in map table Remove it to fix this. Fixes: commit 1d41f36a ("ARM: shmobile: koelsch dts: Add VDD MPU regulator for DVFS") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Marcel Ziswiler 提交于
Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised that the current device tree source includes for our modules only happen to work due to referencing the on-carrier 5v0 supply from USB which is not at all available on-module. The modules actually contain TPS60150 charge pumps to generate the PMIC required 5 volts from the one and only 3.3 volt module supply. This patch fixes this. (Note: When back-porting this to v3.16 stable releases, simply drop the change to tegra30-apalis.dtsi; that file was added in v3.17) Cc: <stable@vger.kernel.org> #v3.16+ Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com> Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: fix for 3.17" from Heiko Stubner: Pinctrl that got accidentially dropped when reorganizing the dts files and addition of the new Rockchip list to MAINTAINERS. * tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: MAINTAINERS: add new Rockchip SoC list ARM: dts: rockchip: readd missing mmc0 pinctrl settings Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 24 8月, 2014 2 次提交
-
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NDave Airlie <airlied@gmail.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
This pull just contains some new pci ids. * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add additional SI pci ids drm/radeon: add new bonaire pci ids drm/radeon: add new KV pci id
-
- 23 8月, 2014 22 次提交
-
-
由 Heiko Stuebner 提交于
Add the new list that Rockchip-specific patches should also be directed to. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
由 Heiko Stuebner 提交于
During the restructuring of the Rockchip Cortex-A9 dtsi files it seems like the pinctrl settings vanished at some point from the mmc0 support. This of course renders them unusable, so readd the necessary pinctrl properties. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
由 Olof Johansson 提交于
Merge tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner DT changes, take 2" from Maxime Ripard: Only a single patch in here that fixes a DTC warning. * tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Steven Rostedt (Red Hat) 提交于
In __ftrace_replace_code(), when converting the call to a nop in a function it needs to compare against the "curr" (current) value of the ftrace ops, and not the "new" one. It currently does not affect x86 which is the only arch to do the trampolines with function graph tracer, but when other archs that do depend on this code implement the function graph trampoline, it can crash. Here's an example when ARM uses the trampolines (in the future): ------------[ cut here ]------------ WARNING: CPU: 0 PID: 9 at kernel/trace/ftrace.c:1716 ftrace_bug+0x17c/0x1f4() Modules linked in: omap_rng rng_core ipv6 CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.16.0-test-10959-gf0094b28-dirty #52 [<c02188f4>] (unwind_backtrace) from [<c021343c>] (show_stack+0x20/0x24) [<c021343c>] (show_stack) from [<c095a674>] (dump_stack+0x78/0x94) [<c095a674>] (dump_stack) from [<c02532a0>] (warn_slowpath_common+0x7c/0x9c) [<c02532a0>] (warn_slowpath_common) from [<c02532ec>] (warn_slowpath_null+0x2c/0x34) [<c02532ec>] (warn_slowpath_null) from [<c02cbac4>] (ftrace_bug+0x17c/0x1f4) [<c02cbac4>] (ftrace_bug) from [<c02cc44c>] (ftrace_replace_code+0x80/0x9c) [<c02cc44c>] (ftrace_replace_code) from [<c02cc658>] (ftrace_modify_all_code+0xb8/0x164) [<c02cc658>] (ftrace_modify_all_code) from [<c02cc718>] (__ftrace_modify_code+0x14/0x1c) [<c02cc718>] (__ftrace_modify_code) from [<c02c7244>] (multi_cpu_stop+0xf4/0x134) [<c02c7244>] (multi_cpu_stop) from [<c02c6e90>] (cpu_stopper_thread+0x54/0x130) [<c02c6e90>] (cpu_stopper_thread) from [<c0271cd4>] (smpboot_thread_fn+0x1ac/0x1bc) [<c0271cd4>] (smpboot_thread_fn) from [<c026ddf0>] (kthread+0xe0/0xfc) [<c026ddf0>] (kthread) from [<c020f318>] (ret_from_fork+0x14/0x20) ---[ end trace dc9ce72c5b617d8f ]--- [ 65.047264] ftrace failed to modify [<c0208580>] asm_do_IRQ+0x10/0x1c [ 65.054070] actual: 85:1b:00:eb Fixes: 7413af1f "ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global" Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt (Red Hat) 提交于
The latest rewrite of ftrace removed the separate ftrace_ops of the function tracer and the function graph tracer and had them share the same ftrace_ops. This simplified the accounting by removing the multiple layers of functions called, where the global_ops func would call a special list that would iterate over the other ops that were registered within it (like function and function graph), which itself was registered to the ftrace ops list of all functions currently active. If that sounds confusing, the code that implemented it was also confusing and its removal is a good thing. The problem with this change was that it assumed that the function and function graph tracer can never be used at the same time. This is mostly true, but there is an exception. That is when the function profiler uses the function graph tracer to profile. The function profiler can be activated the same time as the function tracer, and this breaks the assumption and the result is that ftrace will crash (it detects the error and shuts itself down, it does not cause a kernel oops). To solve this issue, a previous change allowed the hash tables for the functions traced by a ftrace_ops to be a pointer and let multiple ftrace_ops share the same hash. This allows the function and function_graph tracer to have separate ftrace_ops, but still share the hash, which is what is done. Now the function and function graph tracers have separate ftrace_ops again, and the function tracer can be run while the function_profile is active. Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out) Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Linus Torvalds 提交于
Merge tag 'pwm/for-3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fix from Thierry Reding: "Just one bugfix for the PWM lookup table code that would cause a PWM channel to be set to the wrong period and polarity for non-perfect matches" * tag 'pwm/for-3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fix period and polarity in pwm_get() for non-perfect matches
-
由 Michal Kazior 提交于
The new_ctx pointer is set only for non-chanctx drivers. This yielded a crash for chanctx-based drivers during channel switch finalization: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: ieee80211_vif_use_reserved_switch+0x71c/0xb00 [mac80211] Use an adequate chanctx pointer to fix this. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NMichal Kazior <michal.kazior@tieto.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Here are some bug fixes that have piled up during ksummit/linuxcon. 1) Fix endian problems in ibmveth, from Anton Blanchard. 2) IPV6 routing code does GFP_KERNEL allocation in atomic, fix from Benjamin Block. 3) SCTP association fixes from Daniel Borkmann. 4) When multiple VLAN headers are present we have to make sure the second and subsequent ones are pullable in the SKB otherwise we blindly dereference garbage. From Jiri Benc. 5) The argument adjustment of the signature of hlist_add_after*() introduced a regression in the batman-adv code, fix from Sven Eckelmann. 6) Fix TX hang handling to avoid a panic in i40e, from Anjali Singhai Jain. 7) PTP flag test is inverted in i40e driver, from Jesse Brandeburg. 8) ATM LEC driver needs to hold RTNL mutex over MTU changes, from Chas Williams. 9) Truncate packets larger then the TPACKET_V3 format configured buffers, otherwise we overwrite past the end of said buffers. From Eric Dumazet. 10) Fix endianness bugs in qlcnic firmware handling, from Rajesh Borundia and Shahed Shaikh. 11) CXGB4 sometimes doesn't get all of the TX completion events it should resulting in SKBs getting stuck in the TX queue, from Hariprasad Shenai. 12) When the FEC chip's PTP clock is disabled, you can't access the register. Add necessary checks to avoid the resulting hang, from Fugang Duan" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits) drivers: isdn: eicon: xdi_msg.h: Fix typo in #ifndef net: sctp: fix suboptimal edge-case on non-active active/retrans path selection net: sctp: spare unnecessary comparison in sctp_trans_elect_best net: ethernet: broadcom: bnx2x: Remove redundant #ifdef ibmveth: Fix endian issues with rx_no_buffer statistic net: xgene: fix possible NULL dereference in xgene_enet_free_desc_rings() openvswitch: fix panic with multiple vlan headers net: ipv6: fib: don't sleep inside atomic lock net: fec: ptp: avoid register access when ipg clock is disabled cxgb4: Free completed tx skbs promptly cxgb4: Fix race condition in cleanup sctp: not send SCTP_PEER_ADDR_CHANGE notifications with failed probe bnx2x: Revert UNDI flushing mechanism qlcnic: Fix endianess issue in firmware load from file operation qlcnic: Fix endianess issue in FW dump template header qlcnic: Fix flash access interface to application MAINTAINERS: Add section for MRF24J40 IEEE 802.15.4 radio driver macvlan: Allow setting multicast filter on all macvlan types packet: handle too big packets for PACKET_V3 MAINTAINERS: add entry for ec_bhf driver ...
-
由 Steven Rostedt (Red Hat) 提交于
Now that a ftrace_hash can be shared by multiple ftrace_ops, they can dec the rec->flags by more than once (one per those that share the ftrace_hash). This means that the tramp_hash may not have a hash item when it was added. For example, if two ftrace_ops share a hash for a ftrace record, and the first ops has a trampoline, when it adds itself it will set the rec->flags TRAMP flag and increments its nr_trampolines counter. When the second ops is added, it must clear that tramp flag but also decrement the other ops that shares its hash. As the update to the function callbacks has not yet been performed, the other ops will not have the tramp hash set yet and it can not be used to know to decrement its nr_trampolines. Luckily, the tramp_hash does not need to be used. As the ftrace_mutex is held, a ops with a trampoline to a record during an update of another ops that shares the record will have its func_hash pointing to it. Since a trampoline can only be set for a record if only one ops is attached to it, we can just check if the record has a trampoline (the FTRACE_FL_TRAMP flag is set) and then find the ops that has this record in its hashes. Also added some output to help debug when things go wrong. Cc: stable@vger.kernel.org # 3.16+ (apply after 3.17-rc4 is out) Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Rasmus Villemoes 提交于
Test for definedness of the macro which is actually defined (the change is hard to see: it is s/SSS/SSA/). Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
In SCTP, selection of active (T.ACT) and retransmission (T.RET) transports is being done whenever transport control operations (UP, DOWN, PF, ...) are engaged through sctp_assoc_control_transport(). Commits 4c47af4d ("net: sctp: rework multihoming retransmission path selection to rfc4960") and a7288c4d ("net: sctp: improve sctp_select_active_and_retran_path selection") have both improved it towards a more fine-grained and optimal path selection. Currently, the selection algorithm for T.ACT and T.RET is as follows: 1) Elect the two most recently used ACTIVE transports T1, T2 for T.ACT, T.RET, where T.ACT<-T1 and T1 is most recently used 2) In case primary path T.PRI not in {T1, T2} but ACTIVE, set T.ACT<-T.PRI and T.RET<-T1 3) If only T1 is ACTIVE from the set, set T.ACT<-T1 and T.RET<-T1 4) If none is ACTIVE, set T.ACT<-best(T.PRI, T.RET, T3) where T3 is the most recently used (if avail) in PF, set T.RET<-T.PRI Prior to above commits, 4) was simply a camp on T.ACT<-T.PRI and T.RET<-T.PRI, ignoring possible paths in PF. Camping on T.PRI is still slightly suboptimal as it can lead to the following scenario: Setup: <A> <B> T1: p1p1 (10.0.10.10) <==> .'`) <==> p1p1 (10.0.10.12) <= T.PRI T2: p1p2 (10.0.10.20) <==> (_ . ) <==> p1p2 (10.0.10.22) net.sctp.rto_min = 1000 net.sctp.path_max_retrans = 2 net.sctp.pf_retrans = 0 net.sctp.hb_interval = 1000 T.PRI is permanently down, T2 is put briefly into PF state (e.g. due to link flapping). Here, the first time transmission is sent over PF path T2 as it's the only non-INACTIVE path, but the retransmitted data-chunks are sent over the INACTIVE path T1 (T.PRI), which is not good. After the patch, it's choosing better transports in both cases by modifying step 4): 4) If none is ACTIVE, set T.ACT_new<-best(T.ACT_old, T3) where T3 is the most recently used (if avail) in PF, set T.RET<-T.ACT_new This will still select a best possible path in PF if available (which can also include T.PRI/T.RET), and set both T.ACT/T.RET to it. In case sctp_assoc_control_transport() *just* put T.ACT_old into INACTIVE as it transitioned from ACTIVE->PF->INACTIVE and stays in INACTIVE just for a very short while before going back ACTIVE, it will guarantee that this path will be reselected for T.ACT/T.RET since T3 (PF) is not available. Previously, this was not possible, as we would only select between T.PRI and T.RET, and a possible T3 would be NULL due to the fact that we have just transitioned T3 in sctp_assoc_control_transport() from PF->INACTIVE and would select a suboptimal path when T.PRI/T.RET have worse properties. In the case that T.ACT_old permanently went to INACTIVE during this transition and there's no PF path available, plus T.PRI and T.RET are INACTIVE as well, we would now camp on T.ACT_old, but if everything is being INACTIVE there's really not much we can do except hoping for a successful HB to bring one of the transports back up again and, thus cause a new selection through sctp_assoc_control_transport(). Now both tests work fine: Case 1: 1. T1 S(ACTIVE) T.ACT T2 S(ACTIVE) T.RET 2. T1 S(ACTIVE) T.ACT, T.RET T2 S(PF) 3. T1 S(ACTIVE) T.ACT, T.RET T2 S(INACTIVE) 5. T1 S(PF) T.ACT, T.RET T2 S(INACTIVE) [ 5.1 T1 S(INACTIVE) T.ACT, T.RET T2 S(INACTIVE) ] 6. T1 S(ACTIVE) T.ACT, T.RET T2 S(INACTIVE) 7. T1 S(ACTIVE) T.ACT T2 S(ACTIVE) T.RET Case 2: 1. T1 S(ACTIVE) T.ACT T2 S(ACTIVE) T.RET 2. T1 S(PF) T2 S(ACTIVE) T.ACT, T.RET 3. T1 S(INACTIVE) T2 S(ACTIVE) T.ACT, T.RET 5. T1 S(INACTIVE) T2 S(PF) T.ACT, T.RET [ 5.1 T1 S(INACTIVE) T2 S(INACTIVE) T.ACT, T.RET ] 6. T1 S(INACTIVE) T2 S(ACTIVE) T.ACT, T.RET 7. T1 S(ACTIVE) T.ACT T2 S(ACTIVE) T.RET Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
When both transports are the same, we don't have to go down that road only to realize that we will return the very same transport. We are guaranteed that curr is always non-NULL. Therefore, just short-circuit this special case. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rasmus Villemoes 提交于
Nothing defines _ASM_GENERIC_INT_L64_H, it is a weird way to check for 64 bit longs, and u64 should be printed using %llx anyway. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Blanchard 提交于
Hidden away in the last 8 bytes of the buffer_list page is a solitary statistic. It needs to be byte swapped or else ethtool -S will produce numbers that terrify the user. Since we do this in multiple places, create a helper function with a comment explaining what is going on. Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
A NULL pointer dereference is possible for the argument ring->buf_pool which is passed to xgene_enet_free_desc_ring(), as ring could be NULL. And now since NULL pointers are being checked for before the calls to xgene_enet_free_desc_ring(), might as well take advantage of them and not call the function if the argument would be NULL. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
When there are multiple vlan headers present in a received frame, the first one is put into vlan_tci and protocol is set to ETH_P_8021Q. Anything in the skb beyond the VLAN TPID may be still non-linear, including the inner TCI and ethertype. While ovs_flow_extract takes care of IP and IPv6 headers, it does nothing with ETH_P_8021Q. Later, if OVS_ACTION_ATTR_POP_VLAN is executed, __pop_vlan_tci pulls the next vlan header into vlan_tci. This leads to two things: 1. Part of the resulting ethernet header is in the non-linear part of the skb. When eth_type_trans is called later as the result of OVS_ACTION_ATTR_OUTPUT, kernel BUGs in __skb_pull. Also, __pop_vlan_tci is in fact accessing random data when it reads past the TPID. 2. network_header points into the ethernet header instead of behind it. mac_len is set to a wrong value (10), too. Reported-by: NYulong Pei <ypei@redhat.com> Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Block 提交于
The function fib6_commit_metrics() allocates a piece of memory in mode GFP_KERNEL while holding an atomic lock from higher up in the stack, in the function __ip6_ins_rt(). This produces the following BUG: > BUG: sleeping function called from invalid context at mm/slub.c:1250 > in_atomic(): 1, irqs_disabled(): 0, pid: 2909, name: dhcpcd > 2 locks held by dhcpcd/2909: > #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81978e67>] rtnl_lock+0x17/0x20 > #1: (&tb->tb6_lock){++--+.}, at: [<ffffffff81a6951a>] ip6_route_add+0x65a/0x800 > CPU: 1 PID: 2909 Comm: dhcpcd Not tainted 3.17.0-rc1 #1 > Hardware name: ASUS All Series/Q87T, BIOS 0216 10/16/2013 > 0000000000000008 ffff8800c8f13858 ffffffff81af135a 0000000000000000 > ffff880212202430 ffff8800c8f13878 ffffffff810f8d3a ffff880212202c98 > 0000000000000010 ffff8800c8f138c8 ffffffff8121ad0e 0000000000000001 > Call Trace: > [<ffffffff81af135a>] dump_stack+0x4e/0x68 > [<ffffffff810f8d3a>] __might_sleep+0x10a/0x120 > [<ffffffff8121ad0e>] kmem_cache_alloc_trace+0x4e/0x190 > [<ffffffff81a6bcd6>] ? fib6_commit_metrics+0x66/0x110 > [<ffffffff81a6bcd6>] fib6_commit_metrics+0x66/0x110 > [<ffffffff81a6cbf3>] fib6_add+0x883/0xa80 > [<ffffffff81a6951a>] ? ip6_route_add+0x65a/0x800 > [<ffffffff81a69535>] ip6_route_add+0x675/0x800 > [<ffffffff81a68f2a>] ? ip6_route_add+0x6a/0x800 > [<ffffffff81a6990c>] inet6_rtm_newroute+0x5c/0x80 > [<ffffffff8197cf01>] rtnetlink_rcv_msg+0x211/0x260 > [<ffffffff81978e67>] ? rtnl_lock+0x17/0x20 > [<ffffffff81119708>] ? lock_release_holdtime+0x28/0x180 > [<ffffffff81978e67>] ? rtnl_lock+0x17/0x20 > [<ffffffff8197ccf0>] ? __rtnl_unlock+0x20/0x20 > [<ffffffff819a989e>] netlink_rcv_skb+0x6e/0xd0 > [<ffffffff81978ee5>] rtnetlink_rcv+0x25/0x40 > [<ffffffff819a8e59>] netlink_unicast+0xd9/0x180 > [<ffffffff819a9600>] netlink_sendmsg+0x700/0x770 > [<ffffffff81103735>] ? local_clock+0x25/0x30 > [<ffffffff8194e83c>] sock_sendmsg+0x6c/0x90 > [<ffffffff811f98e3>] ? might_fault+0xa3/0xb0 > [<ffffffff8195ca6d>] ? verify_iovec+0x7d/0xf0 > [<ffffffff8194ec3e>] ___sys_sendmsg+0x37e/0x3b0 > [<ffffffff8111ef15>] ? trace_hardirqs_on_caller+0x185/0x220 > [<ffffffff81af979e>] ? mutex_unlock+0xe/0x10 > [<ffffffff819a55ec>] ? netlink_insert+0xbc/0xe0 > [<ffffffff819a65e5>] ? netlink_autobind.isra.30+0x125/0x150 > [<ffffffff819a6520>] ? netlink_autobind.isra.30+0x60/0x150 > [<ffffffff819a84f9>] ? netlink_bind+0x159/0x230 > [<ffffffff811f989a>] ? might_fault+0x5a/0xb0 > [<ffffffff8194f25e>] ? SYSC_bind+0x7e/0xd0 > [<ffffffff8194f8cd>] __sys_sendmsg+0x4d/0x80 > [<ffffffff8194f912>] SyS_sendmsg+0x12/0x20 > [<ffffffff81afc692>] system_call_fastpath+0x16/0x1b Fixing this by replacing the mode GFP_KERNEL with GFP_ATOMIC. Signed-off-by: NBenjamin Block <bebl@mageta.org> Acked-by: NDavid Rientjes <rientjes@google.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nimrod Andy 提交于
The current kernel hang on i.MX6SX with rootfs mount from MMC. The root cause is that ptp uses a periodic timer to access enet register even if ipg clock is disabled. FEC ptp driver start one period timer to read 1588 counter register in the ptp init function that is called after FEC driver is probed. To save power, after FEC probe finish, FEC driver disable all clocks including ipg clock that is needed for register access. i.MX5x, i.MX6q/dl/sl FEC register access don't cause system hang when ipg clock is disabled, just return zero value. But for i.MX6sx SOC, it cause system hang. To avoid the issue, we need to check ptp clock status before ptp timer count access. Signed-off-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steven Rostedt (Red Hat) 提交于
When updating what an ftrace_ops traces, if it is registered (that is, actively tracing), and that ftrace_ops uses the shared global_ops local_hash, then we need to update all tracers that are active and also share the global_ops' ftrace_hash_ops. Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out) Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt (Red Hat) 提交于
Currently the top level debug file system function tracer shares its ftrace_ops with the function graph tracer. This was thought to be fine because the tracers are not used together, as one can only enable function or function_graph tracer in the current_tracer file. But that assumption proved to be incorrect. The function profiler can use the function graph tracer when function tracing is enabled. Since all function graph users uses the function tracing ftrace_ops this causes a conflict and when a user enables both function profiling as well as the function tracer it will crash ftrace and disable it. The quick solution so far is to move them as separate ftrace_ops like it was earlier. The problem though is to synchronize the functions that are traced because both function and function_graph tracer are limited by the selections made in the set_ftrace_filter and set_ftrace_notrace files. To handle this, a new structure is made called ftrace_ops_hash. This structure will now hold the filter_hash and notrace_hash, and the ftrace_ops will point to this structure. That will allow two ftrace_ops to share the same hashes. Since most ftrace_ops do not share the hashes, and to keep allocation simple, the ftrace_ops structure will include both a pointer to the ftrace_ops_hash called func_hash, as well as the structure itself, called local_hash. When the ops are registered, the func_hash pointer will be initialized to point to the local_hash within the ftrace_ops structure. Some of the ftrace internal ftrace_ops will be initialized statically. This will allow for the function and function_graph tracer to have separate ops but still share the same hash tables that determine what functions they trace. Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out) Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Will Deacon: "This small set of fixes addresses a few issues introduced during the merge window, including: - fix typo in I-cache detection that was causing us to treat all I-caches as aliasing - hook up memfd_create and getrandom syscalls for native and compat - revert a temporary hack for defconfig builds in -next (the audit tree changes didn't make it in this merge window) - a couple of UEFI fixes for TEXT_OFFSET fuzzing and /memreserve/ - a simple sparsemem fix for 48-bit physical addressing - small defconfig updates to get autotesters working with X-gene" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Revert "arm64: Do not invoke audit_syscall_* functions if !CONFIG_AUDIT_SYSCALL" arm64: mm: update max pa bits to 48 arm64: ignore DT memreserve entries when booting in UEFI mode arm64: configs: Enable X-Gene SATA and ethernet in defconfig arm64: align randomized TEXT_OFFSET on 4 kB boundary asm-generic: add memfd_create system call to unistd.h arm64: compat: wire up memfd_create and getrandom syscalls for aarch32 arm64: fix typo in I-cache policy detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU fixes from Joerg Roedel: "The fixes include: - fix a crash in the VT-d driver when devices with a driver attached are hot-unplugged - fix a AMD IOMMU driver crash with device assignment of 32 bit PCI devices to KVM guests - fix for a copy&paste error in generic IOMMU code. Now the right function pointer is checked before calling" * tag 'iommu-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/core: Check for the right function pointer in iommu_map() iommu/amd: Fix cleanup_domain for mass device removal iommu/vt-d: Defer domain removal if device is assigned to a driver
-
- 22 8月, 2014 3 次提交
-
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
bug: https://bugs.freedesktop.org/show_bug.cgi?id=82912Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-