- 28 3月, 2011 2 次提交
-
-
由 Tsutomu Itoh 提交于
This patch changes some BUG_ON() to the error return. (but, most callers still use BUG_ON()) Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 liubo 提交于
Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 29 1月, 2011 1 次提交
-
-
由 Tsutomu Itoh 提交于
The error check of btrfs_join_transaction()/btrfs_join_transaction_nolock() is added, and the mistake of the error check in several places is corrected. For more stable Btrfs, I think that we should reduce BUG_ON(). But, I think that long time is necessary for this. So, I propose this patch as a short-term solution. With this patch: - To more stable Btrfs, the part that should be corrected is clarified. - The panic isn't done by the NULL pointer reference etc. (even if BUG_ON() is increased temporarily) - The error code is returned in the place where the error can be easily returned. As a long-term plan: - BUG_ON() is reduced by using the forced-readonly framework, etc. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 18 1月, 2011 1 次提交
-
-
由 liubo 提交于
This patch comes from "Forced readonly mounts on errors" ideas. As we know, this is the first step in being more fault tolerant of disk corruptions instead of just using BUG() statements. The major content: - add a framework for generating errors that should result in filesystems going readonly. - keep FS state in disk super block. - make sure that all of resource will be freed and released at umount time. - make sure that fter FS is forced readonly on error, there will be no more disk change before FS is corrected. For this, we should stop write operation. After this patch is applied, the conversion from BUG() to such a framework can happen incrementally. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 23 12月, 2010 1 次提交
-
-
由 Li Zefan 提交于
Usage: Set BTRFS_SUBVOL_RDONLY of btrfs_ioctl_vol_arg_v2->flags, and call ioctl(BTRFS_I0CTL_SNAP_CREATE_V2). Implementation: - Set readonly bit of btrfs_root_item->flags. - Add readonly checks in btrfs_permission (inode_permission), btrfs_setattr, btrfs_set/remove_xattr and some ioctls. Changelog for v3: - Eliminate btrfs_root->readonly, but check btrfs_root->root_item.flags. - Rename BTRFS_ROOT_SNAP_RDONLY to BTRFS_ROOT_SUBVOL_RDONLY. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
- 22 11月, 2010 1 次提交
-
-
由 Josef Bacik 提交于
There are lots of places where we do dentry->d_parent->d_inode without holding the dentry->d_lock. This could cause problems with rename. So instead we need to use dget_parent() and hold the reference to the parent as long as we are going to use it's inode and then dput it at the end. Signed-off-by: NJosef Bacik <josef@redhat.com> Cc: raven@themaw.net Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 30 10月, 2010 3 次提交
-
-
由 Sage Weil 提交于
START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sage Weil 提交于
Add support for an async transaction commit that is ordered such that any subsequent operations will join the following transaction, but does not wait until the current commit is fully on disk. This avoids much of the latency associated with the btrfs_commit_transaction for callers concerned with serialization and not safety. The wait_for_unblock flag controls whether we wait for the 'middle' portion of commit_transaction to complete, which is necessary if the caller expects some of the modifications contained in the commit to be available (this is the case for subvol/snapshot creation). Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sage Weil 提交于
We calculate timeout (either 1 or MAX_SCHEDULE_TIMEOUT) based on whether num_writers > 1 or should_grow at the top of the loop. Then, much much later, we wait for that timeout if either num_writers or should_grow is true. However, it's possible for a racing process (calling btrfs_end_transaction()) to decrement num_writers such that we wait forever instead of for 1. Fix this by deciding how long to wait when we wait. Include a smp_mb() before checking if the waitqueue is active to ensure the num_writers is visible. Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 29 10月, 2010 1 次提交
-
-
由 Josef Bacik 提交于
In order to save free space cache, we need an inode to hold the data, and we need a special item to point at the right inode for the right block group. So first, create a special item that will point to the right inode, and the number of extent entries we will have and the number of bitmaps we will have. We truncate and pre-allocate space everytime to make sure it's uptodate. This feature will be turned on as soon as you mount with -o space_cache, however it is safe to boot into old kernels, they will just generate the cache the old fashion way. When you boot back into a newer kernel we will notice that we modified and not the cache and automatically discard the cache. Signed-off-by: NJosef Bacik <josef@redhat.com>
-
- 23 10月, 2010 1 次提交
-
-
由 Josef Bacik 提交于
With multi-threaded writes we were getting ENOSPC early because somebody would come in, start flushing delalloc because they couldn't make their reservation, and in the meantime other threads would come in and use the space that was getting freed up, so when the original thread went to check to see if they had space they didn't and they'd return ENOSPC. So instead if we have some free space but not enough for our reservation, take the reservation and then start doing the flushing. The only time we don't take reservations is when we've already overcommitted our space, that way we don't have people who come late to the party way overcommitting ourselves. This also moves all of the retrying and flushing code into reserve_metdata_bytes so it's all uniform. This keeps my fs_mark test from returning -ENOSPC as soon as it starts and actually lets me fill up the disk. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
- 25 5月, 2010 6 次提交
-
-
由 Chris Mason 提交于
Yan Zheng noticed two places we were doing a lot of work without task->state set to TASK_RUNNING. This sets the state properly after we get ready to sleep but decide not to. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
This patch adds metadata ENOSPC handling for the balance code. It is consisted by following major changes: 1. Avoid COW tree leave in the phrase of merging tree. 2. Handle interaction with snapshot creation. 3. make the backref cache can live across transactions. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
reserve metadata space for handling orphan inodes Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
Reserve metadata space for extent tree, checksum tree and root tree Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
Besides simplify the code, this change makes sure all metadata reservation for normal metadata operations are released after committing transaction. Changes since V1: Add code that check if unlink and rmdir will free space. Add ENOSPC handling for clone ioctl. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
Introducing metadata reseravtion contexts has two major advantages. First, it makes metadata reseravtion more traceable. Second, it can reclaim freed space and re-add them to the itself after transaction committed. Besides add btrfs_block_rsv structure and related helper functions, This patch contains following changes: Move code that decides if freed tree block should be pinned into btrfs_free_tree_block(). Make space accounting more accurate, mainly for handling read only block groups. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 06 4月, 2010 1 次提交
-
-
由 Sage Weil 提交于
This creates the reference to a new snapshot in the same commit as the snapshot itself. This avoids the need for a second commit in order for a snapshot to be persistent, and also avoids the problem of "leaking" a new snapshot tree root if the host crashes before the second commit takes place. It is not at all clear to me why it wasn't always done this way. If there is still a reason for the two-stage {create,finish}_pending_snapshots() approach I'm missing something! :) I've been running this for a couple weeks under pretty heavy usage (a few snapshots per minute) without obvious problems. Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 31 3月, 2010 1 次提交
-
-
由 Zhao Lei 提交于
We only need to call finish_wait() after wait loop. By the way, this patch makes code of waiting loop similar to example in wait.h(no functional change) Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 15 3月, 2010 1 次提交
-
-
由 Sage Weil 提交于
Flush any delalloc extents when we create a snapshot, so that recently written file data is always included in the snapshot. A later commit will add the ability to snapshot without the flush, but most people expect flushing. Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 09 3月, 2010 1 次提交
-
-
由 Eric Paris 提交于
btrfs inialize rb trees in quite a number of places by settin rb_node = NULL; The problem with this is that 17d9ddc7 in the linux-next tree adds a new field to that struct which needs to be NULL for the new rbtree library code to work properly. This patch uses RB_ROOT as the intializer so all of the relevant fields will be NULL'd. Without the patch I get a panic. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 18 12月, 2009 3 次提交
-
-
由 Yan, Zheng 提交于
The bytes_used field in root item was originally planned to trace the amount of used data and tree blocks. But it never worked right since we can't trace freeing of data accurately. This patch changes it to only trace the amount of tree blocks. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
iput() can trigger new transactions if we are dropping the final reference, so calling it in btrfs_commit_transaction may end up deadlock. This patch adds delayed iput to avoid the issue. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
btrfs_lookup_dentry may trigger orphan cleanup, so it's not good to call it while committing a transaction. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 16 12月, 2009 1 次提交
-
-
由 Yan, Zheng 提交于
We allow two log transactions at a time, but use same flag to mark dirty tree-log btree blocks. So we may flush dirty blocks belonging to newer log transaction when committing a log transaction. This patch fixes the issue by using two flags to mark dirty tree-log btree blocks. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 12 11月, 2009 1 次提交
-
-
由 Josef Bacik 提交于
We use journal_info to tell if we're in a nested transaction to make sure we don't commit the transaction within a nested transaction. We use another method to see if there are any outstanding ioctl trans handles, so if we're starting one do not set current->journal_info, since it will screw with other filesystems. This patch also cleans up the starting stuff so there aren't any magic numbers. Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 14 10月, 2009 1 次提交
-
-
由 Chris Mason 提交于
Syncing the tree log is a 3 phase operation. 1) write and wait for all the tree log blocks for a given root. 2) write and wait for all the tree log blocks for the tree of tree log roots. 3) write and wait for the super blocks (barriers here) This isn't as efficient as it could be because there is no requirement to wait for the blocks from step one to hit the disk before we start writing the blocks from step two. This commit changes the sequence so that we don't start waiting until all the tree blocks from both steps one and two have been sent to disk. We do this by breaking up btrfs_write_wait_marked_extents into two functions, which is trivial because it was already broken up into two parts. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 29 9月, 2009 1 次提交
-
-
由 Josef Bacik 提交于
At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: NJosef Bacik <jbacik@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 22 9月, 2009 3 次提交
-
-
由 Yan, Zheng 提交于
This patch adds snapshot/subvolume destroy ioctl. A subvolume that isn't being used and doesn't contains links to other subvolumes can be destroyed. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
btrfs allows subvolumes and snapshots anywhere in the directory tree. If we snapshot a subvolume that contains a link to other subvolume called subvolA, subvolA can be accessed through both the original subvolume and the snapshot. This is similar to creating hard link to directory, and has the very similar problems. The aim of this patch is enforcing there is only one access point to each subvolume. Only the first directory entry (the one added when the subvolume/snapshot was created) is treated as valid access point. The first directory entry is distinguished by checking root forward reference. If the corresponding root forward reference is missing, we know the entry is not the first one. This patch also adds snapshot/subvolume rename support, the code allows rename subvolume link across subvolumes. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
This patch contains two changes to avoid unnecessary tree block reads during snapshot dropping. First, check tree block's reference count and flags before reading the tree block. if reference count > 1 and there is no need to update backrefs, we can avoid reading the tree block. Second, save when snapshot was created in root_key.offset. we can compare block pointer's generation with snapshot's creation generation during updating backrefs. If a given block was created before snapshot was created, the snapshot can't be the tree block's owner. So we can avoid reading the block. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 18 9月, 2009 1 次提交
-
-
由 Yan Zheng 提交于
This patch gets rid of two limitations of async block group caching. The old code delays handling pinned extents when block group is in caching. To allocate logged file extents, the old code need wait until block group is fully cached. To get rid of the limitations, This patch introduces a data structure to track the progress of caching. Base on the caching progress, we know which extents should be added to the free space cache when handling the pinned extents. The logged file extents are also handled in a similar way. This patch also changes how pinned extents are tracked. The old code uses one tree to track pinned extents, and copy the pinned extents tree at transaction commit time. This patch makes it use two trees to track pinned extents. One tree for extents that are pinned in the running transaction, one tree for extents that can be unpinned. At transaction commit time, we swap the two trees. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 30 7月, 2009 2 次提交
-
-
由 Chris Mason 提交于
The semaphore used by the async caching threads can prevent a transaction commit, which can make the FS appear to stall. This releases the semaphore more often when a transaction commit is in progress. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan Zheng 提交于
The async block group caching code uses the commit_root pointer to get a stable version of the extent allocation tree for scanning. This copy of the tree root isn't going to change and it significantly reduces the complexity of the scanning code. During a commit, we have a loop where we update the extent allocation tree root. We need to loop because updating the root pointer in the tree of tree roots may allocate blocks which may change the extent allocation tree. Right now the commit_root pointer is changed inside this loop. It is more correct to change the commit_root pointer only after all the looping is done. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 25 7月, 2009 1 次提交
-
-
由 Sage Weil 提交于
The commit_transaction call to wait_ordered_extents when snap_pending passes nocow_only=1 to process only NOCOW or PREALLOC extents. This isn't correct for the 'flushoncommit' mode, as it skips extents we just started IO on in start_delalloc_inodes. So, in the flushoncommit case, wait on all ordered extents. Otherwise, only pass the nocow_only flag to wait_ordered_extents if snap_pending. Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 24 7月, 2009 1 次提交
-
-
由 Josef Bacik 提交于
This patch moves the caching of the block group off to a kthread in order to allow people to allocate sooner. Instead of blocking up behind the caching mutex, we instead kick of the caching kthread, and then attempt to make an allocation. If we cannot, we wait on the block groups caching waitqueue, which the caching kthread will wake the waiting threads up everytime it finds 2 meg worth of space, and then again when its finished caching. This is how I tested the speedup from this mkfs the disk mount the disk fill the disk up with fs_mark unmount the disk mount the disk time touch /mnt/foo Without my changes this took 11 seconds on my box, with these changes it now takes 1 second. Another change thats been put in place is we lock the super mirror's in the pinned extent map in order to keep us from adding that stuff as free space when caching the block group. This doesn't really change anything else as far as the pinned extent map is concerned, since for actual pinned extents we use EXTENT_DIRTY, but it does mean that when we unmount we have to go in and unlock those extents to keep from leaking memory. I've also added a check where when we are reading block groups from disk, if the amount of space used == the size of the block group, we go ahead and mark the block group as cached. This drastically reduces the amount of time it takes to cache the block groups. Using the same test as above, except doing a dd to a file and then unmounting, it used to take 33 seconds to umount, now it takes 3 seconds. This version uses the commit_root in the caching kthread, and then keeps track of how many async caching threads are running at any given time so if one of the async threads is still running as we cross transactions we can wait until its finished before handling the pinned extents. Thank you, Signed-off-by: NJosef Bacik <jbacik@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 22 7月, 2009 1 次提交
-
-
由 Yan Zheng 提交于
Write dirty block groups may allocate new block, and so may add new delayed back ref. btrfs_run_delayed_refs may make some block groups dirty. commit_cowonly_roots does not handle the recursion properly, and some dirty blocks can be left unwritten at commit time. This patch moves btrfs_run_delayed_refs into the loop that writes dirty block groups, and makes the code not break out of the loop until there are no dirty block groups or delayed back refs. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 03 7月, 2009 1 次提交
-
-
由 Yan Zheng 提交于
The new backref format has restriction on type of backref item. If a tree block isn't referenced by its owner tree, full backrefs must be used for the pointers in it. When a tree block loses its owner tree's reference, backrefs for the pointers in it should be updated to full backrefs. Current btrfs_drop_snapshot misses the code that updates backrefs, so it's unsafe for general use. This patch adds backrefs update code to btrfs_drop_snapshot. It isn't a problem in the restricted form btrfs_drop_snapshot is used today, but for general snapshot deletion this update is required. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 16 6月, 2009 1 次提交
-
-
由 Yan Zheng 提交于
commit_fs_roots skips updating root items for fs trees that aren't modified. This is unsafe now that relocation code modifies root item's last_snapshot field without modifying corresponding fs tree. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-