- 10 7月, 2013 40 次提交
-
-
由 Tang Chen 提交于
Remove one redundant "nid" in the comment. Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
There is no parameter "sync" in address_space_operations->migratepage(). It should be migrate_mode. And the comment is for MIGRATE_ASYNC. Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
When searching a vmap area in the vmalloc space, we use (addr + size - 1) to check if the value is less than addr, which is an overflow. But we assign (addr + size) to vmap_area->va_end. So if we come across the below case: (addr + size - 1) : not overflow (addr + size) : overflow we will assign an overflow value (e.g 0) to vmap_area->va_end, And this will trigger BUG in __insert_vmap_area, causing system panic. So using (addr + size) to check the overflow should be the correct behaviour, not (addr + size - 1). Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Reported-by: NGhennadi Procopciuc <unix140@gmail.com> Tested-by: NDaniel Baluta <dbaluta@ixiacom.com> Cc: David Rientjes <rientjes@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
These VM_<READfoo> macros aren't used very often and three of them aren't used at all. Expand the ones that are used in-place, and remove all the now unused #define VM_<foo> macros. VM_READHINTMASK, VM_NormalReadHint and VM_ClearReadHint were added just before 2.4 and appears have never been used. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanpeng Li 提交于
The old codes accumulate addr to get right pmd, however, currently pmds are preallocated and transfered as a parameter, there is unnecessary to accumulate addr variable any more, this patch remove it. Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanpeng Li 提交于
Transparent huge zero page is used during the page fault instead of in khugepaged. # ls /sys/kernel/mm/transparent_hugepage/ defrag enabled khugepaged use_zero_page # ls /sys/kernel/mm/transparent_hugepage/khugepaged/ alloc_sleep_millisecs defrag full_scans max_ptes_none pages_collapsed pages_to_scan scan_sleep_millisecs This patch corrects the documentation just like the codes done. Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanpeng Li 提交于
The default zonelist order selecter will select "node" order if any nodes DMA zone comprises greater than 70% of its local memory instead of 60%, according to default_zonelist_order::low_kmem_size > total * 70/100. Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanpeng Li 提交于
After commit 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue"), there is no bdi forker thread any more. However, WB_REASON_FORKER_THREAD is still used due to it is TPs userland visible and we won't be exposing exactly the same information with just a different name. Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: NTejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanpeng Li 提交于
After commit 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue"), bdi_writeback_workfn runs off bdi_writeback->dwork, on each execution, it processes bdi->work_list and reschedules if there are more things to do instead of flush any work that race with us existing. It is unecessary to check force_wait in wb_do_writeback since it is always 0 after the mentioned commit. This patch remove the force_wait in wb_do_writeback. Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: NTejun Heo <tj@kernel.org> Reviewed-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanpeng Li 提交于
wb_reason_name is not used any more - remove it. Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: NTejun Heo <tj@kernel.org> Reviewed-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Haicheng Li 提交于
It's not used globally and could be static. Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
With CONFIG_MEMORY_HOTREMOVE unset, there is a compile warning: mm/sparse.c:755: warning: `clear_hwpoisoned_pages' defined but not used And Bisecting it ended up pointing to 4edd7cef ("mm, hotplug: avoid compiling memory hotremove functions when disabled"). This is because the commit above put sparse_remove_one_section() within the protection of CONFIG_MEMORY_HOTREMOVE but the only user of clear_hwpoisoned_pages() is sparse_remove_one_section(), and it is not within the protection of CONFIG_MEMORY_HOTREMOVE. So put clear_hwpoisoned_pages within CONFIG_MEMORY_HOTREMOVE should fix the warning. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Acked-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
This function is nowhere used, and it has a confusing name with put_page in mm/swap.c. So better to remove it. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
vfree() only needs schedule_work(&p->wq) if p->list was empty, otherwise vfree_deferred->wq is already pending or it is running and didn't do llist_del_all() yet. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
In __rmqueue_fallback(), current_order loops down from MAX_ORDER - 1 to the order passed. MAX_ORDER is typically 11 and pageblock_order is typically 9 on x86. Integer division truncates, so pageblock_order / 2 is 4. For the first eight iterations, it's guaranteed that current_order >= pageblock_order / 2 if it even gets that far! So just remove the unlikely(), it's completely bogus. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Suggested-by: NDavid Rientjes <rientjes@google.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
These functions are nowhere used, so remove them. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
The callers of build_zonelists_node always pass MAX_NR_ZONES -1 as the zone_type argument, so we can directly use the value in build_zonelists_node and remove zone_type argument. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Seth Jennings 提交于
Add maintainer information for zswap and zbud into the MAINTAINERS file. Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
0xc just means MOVABLE + DMA32, which results in zone DMA32. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Glauber Costa 提交于
The memory we used to hold the memcg arrays is currently accounted to the current memcg. But that creates a problem, because that memory can only be freed after the last user is gone. Our only way to know which is the last user, is to hook up to freeing time, but the fact that we still have some in flight kmallocs will prevent freeing to happen. I believe therefore to be just easier to account this memory as global overhead. Signed-off-by: NGlauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Glauber Costa 提交于
The memory we used to hold the memcg arrays is currently accounted to the current memcg. But that creates a problem, because that memory can only be freed after the last user is gone. Our only way to know which is the last user, is to hook up to freeing time, but the fact that we still have some in flight kmallocs will prevent freeing to happen. I believe therefore to be just easier to account this memory as global overhead. This patch (of 2): Disabling accounting is only relevant for some specific memcg internal allocations. Therefore we would initially not have such check at memcg_kmem_newpage_charge, since direct calls to the page allocator that are marked with GFP_KMEMCG only happen outside memcg core. We are mostly concerned with cache allocations and by having this test at memcg_kmem_get_cache we are already able to relay the allocation to the root cache and bypass the memcg caches altogether. There is one exception, though: the SLUB allocator does not create large order caches, but rather service large kmallocs directly from the page allocator. Therefore, the following sequence, when backed by the SLUB allocator: memcg_stop_kmem_account(); kmalloc(<large_number>) memcg_resume_kmem_account(); would effectively ignore the fact that we should skip accounting, since it will drive us directly to this function without passing through the cache selector memcg_kmem_get_cache. Such large allocations are extremely rare but can happen, for instance, for the cache arrays. This was never a problem in practice, because we weren't skipping accounting for the cache arrays. All the allocations we were skipping were fairly small. However, the fact that we were not skipping those allocations are a problem and can prevent the memcgs from going away. As we fix that, we need to make sure that the fix will also work with the SLUB allocator. Signed-off-by: NGlauber Costa <glommer@openvz.org> Reported-by: NMichal Hocko <mhocko@suze.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
We should check the VM_UNITIALIZED flag in s_show(). If this flag is set, that said, the vm_struct is not fully initialized. So it is unnecessary to try to show the information contained in vm_struct. We checked this flag in show_numa_info(), but I think it's better to check it earlier. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
VM_UNLIST was used to indicate that the vm_struct is not listed in vmlist. But after commit 4341fa45 ("mm, vmalloc: remove list management of vmlist after initializing vmalloc"), the meaning of this flag changed. It now means the vm_struct is not fully initialized. So renaming it to VM_UNINITIALIZED seems more reasonable. Also change clear_vm_unlist to clear_vm_uninitialized_flag. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
Use goto to jump to the fail label to give a failure message before returning NULL. This makes the failure handling in this function consistent. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
As we have removed the dead code in the vb_alloc, it seems there is no place to use the alloc_map. So there is no reason to maintain the alloc_map in vmap_block. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
This function is nowhere used now, so remove it. Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
Space in a vmap block that was once allocated is considered dirty and not made available for allocation again before the whole block is recycled. The result is that free space within a vmap block is always contiguous. So if a vmap block has enough free space for allocation, the allocation is impossible to fail. Thus, the fragmented block purging was never invoked from vb_alloc(). So remove this dead code. [ Same patches also sent by: Chanho Min <chanho.min@lge.com> Johannes Weiner <hannes@cmpxchg.org> but git doesn't do "multiple authors" ] Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
There is an extra semi-colon so the function always returns. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
When calculating pages in a node, for each zone in that node, we will have zone_spanned_pages_in_node --> get_pfn_range_for_nid zone_absent_pages_in_node --> get_pfn_range_for_nid That is to say, we call the get_pfn_range_for_nid to get start_pfn and end_pfn of the node for MAX_NR_ZONES * 2 times. And this is totally unnecessary if we call the get_pfn_range_for_nid before zone_*_pages_in_node add two extra arguments node_start_pfn and node_end_pfn for zone_*_pages_in_node, then we can remove the get_pfn_range_in_node in zone_*_pages_in_node. [akpm@linux-foundation.org: make definitions more readable] Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
A few remaining architectures directly kill the page faulting task in an out of memory situation. This is usually not a good idea since that task might not even use a significant amount of memory and so may not be the optimal victim to resolve the situation. Since 2.6.29's 1c0fe6e3 ("mm: invoke oom-killer from page fault") there is a hook that architecture page fault handlers are supposed to call to invoke the OOM killer and let it pick the right task to kill. Convert the remaining architectures over to this hook. To have the previous behavior of simply taking out the faulting task the vm.oom_kill_allocating_task sysctl can be set to 1. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: NDavid Rientjes <rientjes@google.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc bits] Cc: James Hogan <james.hogan@imgtec.com> Cc: David Howells <dhowells@redhat.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Remove struct mem_cgroup_lru_info and fold its single member, the variably sized nodeinfo[0], directly into struct mem_cgroup. This should make it more obvious why it has to be the last member there. Also move the comment that's above that special last member below it, so it is more visible to somebody that considers appending to the struct mem_cgroup. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Acked-by: NMichal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rasmus Villemoes 提交于
This patch is very similar to commit 84d96d89 ("mm: madvise: complete input validation before taking lock"): perform some basic validation of the input to mremap() before taking the ¤t->mm->mmap_sem lock. This also makes the MREMAP_FIXED => MREMAP_MAYMOVE dependency slightly more explicit. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Libo Chen 提交于
Fix two obvious problems: 1. We have registered msm_iommu_driver first, and need unregister it when registered msm_iommu_ctx_driver fail 2. We don't need to kfree drvdata before kzalloc was successful. [akpm@linux-foundation.org: remove now-unneeded initialization of ctx_drvdata, remove unneeded braces] Signed-off-by: NLibo Chen <libo.chen@huawei.com> Acked-by: NDavid Brown <davidb@codeaurora.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: James Hogan <james.hogan@imgtec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lino Sanfilippo 提交于
There have been changes in the locking scheme of fsnotify but the comments in the source code have not been updated yet. This patch corrects this. Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lino Sanfilippo 提交于
In inotify_new_watch() the number of watches for a group is compared against the max number of allowed watches and increased afterwards. The check and incrementation is not done atomically, so it is possible for multiple concurrent threads to pass the check and increment the number of marks above the allowed max. This patch uses an inotify groups mark_lock to ensure that both check and incrementation are done atomic. Furthermore we dont have to worry about the race that allows a concurrent thread to add a watch just after inotify_update_existing_watch() returned with -ENOENT anymore, since this is also synchronized by the groups mark mutex now. Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lino Sanfilippo 提交于
There is no need to use a special mutex to protect against the fcntl/close race (see dnotify.c for a description of this race). Instead the dnotify_groups mark mutex can be used. Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lino Sanfilippo 提交于
The code under the groups mark_mutex in fanotify_add_inode_mark() and fanotify_add_vfsmount_mark() is almost identical. So put it into a seperate function. Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lino Sanfilippo 提交于
For both adding an event to an existing mark and destroying a mark we first have to find it via fsnotify_find_[inode|vfsmount]_mark(). But getting the mark and adding an event (or destroying it) is not done atomically. This opens a race where a thread is about to destroy a mark while another thread still finds the same mark and adds an event to its mask although it will be destroyed. Another race exists concerning the excess of a groups number of marks limit: When a mark is added the number of group marks is checked against the max number of marks per group and increased afterwards. Since check and increment is also not done atomically, this may result in 2 or more processes passing the check at the same time and increasing the number of group marks above the allowed limit. With this patch both races are avoided by doing the concerning operations with the groups mark mutex locked. Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
The ->reserved field isn't cleared so we leak one byte of stack information to userspace. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Simek 提交于
Use proper decimal type for comparison with u32. Compilation warning was introduced by 780a7654 ("audit: Make testing for a valid loginuid explicit.") kernel/auditfilter.c: In function 'audit_data_to_entry': kernel/auditfilter.c:426:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] if ((f->type == AUDIT_LOGINUID) && (f->val == 4294967295)) { Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-