- 20 5月, 2010 9 次提交
-
-
由 Takashi Iwai 提交于
Conflicts: sound/soc/codecs/ad1938.c
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jarkko Nikula 提交于
These pins are for decoupling capacitors for the internal charge pumps in TPA6130A2 and TPA6140A2 and not for connecting external supply. Thanks to Eduardo Valentin <eduardo.valentin@nokia.com> for pointing out the issue with TPA6130A2 and Ilkka Koskinen <ilkka.koskinen@nokia.com> with TPA6140A2. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Reviewed-by: NIlkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 19 5月, 2010 5 次提交
-
-
由 Jarkko Nikula 提交于
Codec output pin should be defined with SND_SOC_DAPM_OUTPUT as otherwise external widgets doesn't alter the output state. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Liam Girdwood 提交于
Fix build warning about unused ops and add ops to the sdp4430 DAI link. Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Jorge Eduardo Candelaria 提交于
Add control to enable earphone driver in TWL6040 codec. This driver is connected to HSDAC Left. Signed-off-by: NJorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: NMargarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Jorge Eduardo Candelaria 提交于
Enable earphone speaker in sdp4430 machine driver. Signed-off-by: NJorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: NMargarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Misael Lopez Cruz 提交于
Add ASoC support for TI SDP4430. Signed-off-by: NMisael Lopez Cruz <x0052729@ti.com> Signed-off-by: NMargarita Olaya Cabrera <magi.olaya@ti.com> Signed-off-by: NJorge Eduardo Candelaria <jorge.candelaria@ti.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 18 5月, 2010 2 次提交
-
-
由 Peter Ujfalusi 提交于
Avoid calling the dac33_hard_power when the codec was already in BIAS_OFF state. This could happen in device suspend and module removal time. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Felipe Balbi 提交于
Since the cases when the same power state would be set again handled gracefully, we do not need to use dev_warn. Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 17 5月, 2010 11 次提交
-
-
由 Julia Lawall 提交于
Use kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
The number of HDMI nodes is expected to go up in future. So don't fail hard on seeing extra converter/pin nodes. We can still operate safely on the nodes within MAX_HDMI_CVTS/MAX_HDMI_PINS. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Add id for Intel CougarPoint HDMI audio codec. CougarPoint provides 3 Audio Converters. Increase MAX_HDMI_CVTS/MAX_HDMI_PINS accordingly. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Use the full chipset codename as codec name. They are more user friendly than the spec abbrs. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
This is necessary to support >=3 HDMI playback devices starting from the CougarPoint codec. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
The entity_type_to_size[] array has LAST_ENTITY_TYPE (11) number of elements, not LAST_ENTITY_ROLE (17). This only affects the debug output. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
There is a typo here. We want to test "*dst" not "dst". Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
Smatch complains that if (dev == SNDRV_CARDS) we're one past the end of the array. That's unlikely to happen in real life, I suppose. Also smatch complains about "strcpy(card->shortname, pcm->name);" The "pcm->name" buffer is 80 characters and "card->shortname" is 32 characters. If you follow the call paths it turns out we never actually use more than 16 characters so it's not a problem. But anyway, let's make it easy for people auditing this in the future. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: rtnetlink: make SR-IOV VF interface symmetric sctp: delete active ICMP proto unreachable timer when free transport tcp: fix MD5 (RFC2385) support
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Oprofile: Fix Loongson irq handler MIPS: N32: Use compat version for sys_ppoll. MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1
-
- 16 5月, 2010 12 次提交
-
-
由 Chris Wright 提交于
Now we have a set of nested attributes: IFLA_VFINFO_LIST (NESTED) IFLA_VF_INFO (NESTED) IFLA_VF_MAC IFLA_VF_VLAN IFLA_VF_TX_RATE This allows a single set to operate on multiple attributes if desired. Among other things, it means a dump can be replayed to set state. The current interface has yet to be released, so this seems like something to consider for 2.6.34. Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
transport may be free before ICMP proto unreachable timer expire, so we should delete active ICMP proto unreachable timer when transport is going away. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
TCP MD5 support uses percpu data for temporary storage. It currently disables preemption so that same storage cannot be reclaimed by another thread on same cpu. We also have to make sure a softirq handler wont try to use also same context. Various bug reports demonstrated corruptions. Fix is to disable preemption and BH. Reported-by: NBhaskar Dutta <bhaskie@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wu Zhangjin 提交于
The interrupt enable bit for the performance counters is in the Control Register $24, not in the counter register. loongson2_perfcount_handler(), we need to use Reported-by: NXu Hengyang <hengyang@mail.ustc.edu.cn> Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1198/Signed-off-by: NRalf Baechle <ralf@linux-mips.org> ---
-
由 Chandrakala Chavva 提交于
The sys_ppoll() takes struct 'struct timespec'. This is different for the N32 and N64 ABIs. Use the compat version to do the proper conversions. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1210/Signed-off-by: NRalf Baechle <ralf@linux-mips.org> ---
-
由 Shane McDonald 提交于
In the FPU emulator code of the MIPS, the Cause bits of the FCSR register are not currently writeable by the ctc1 instruction. In odd corner cases, this can cause problems. For example, a case existed where a divide-by-zero exception was generated by the FPU, and the signal handler attempted to restore the FPU registers to their state before the exception occurred. In this particular setup, writing the old value to the FCSR register would cause another divide-by-zero exception to occur immediately. The solution is to change the ctc1 instruction emulator code to allow the Cause bits of the FCSR register to be writeable. This is the behaviour of the hardware that the code is emulating. This problem was found by Shane McDonald, but the credit for the fix goes to Kevin Kissell. In Kevin's words: I submit that the bug is indeed in that ctc_op: case of the emulator. The Cause bits (17:12) are supposed to be writable by that instruction, but the CTC1 emulation won't let them be updated by the instruction. I think that actually if you just completely removed lines 387-388 [...] things would work a good deal better. At least, it would be a more accurate emulation of the architecturally defined FPU. If I wanted to be really, really pedantic (which I sometimes do), I'd also protect the reserved bits that aren't necessarily writable. Signed-off-by: NShane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1205/Signed-off-by: NRalf Baechle <ralf@linux-mips.org> ---
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check for read permission on src file in the clone ioctl
-
由 kirjanov@gmail.com 提交于
mempool_alloc() can return null in atomic case. Signed-off-by: NDenis Kirjanov <kirjanov@gmail.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicolas Ferre 提交于
As we were using an internal dma flushing routine, this patch changes to the DMA API flush_kernel_dcache_page(). Driver is able to compile now. [akpm@linux-foundation.org: flush_kernel_dcache_page() comes before kunmap_atomic()] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Rosenberg 提交于
The existing code would have allowed you to clone a file that was only open for writing Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: JFS: Free sbi memory in error path fs/sysv: dereferencing ERR_PTR() Fix double-free in logfs Fix the regression created by "set S_DEAD on unlink()..." commit
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf record: Add a fallback to the reference relocation symbol
-
- 15 5月, 2010 1 次提交
-
-
由 Jan Blunck 提交于
I spotted the missing kfree() while removing the BKL. [akpm@linux-foundation.org: avoid multiple returns so it doesn't happen again] Signed-off-by: NJan Blunck <jblunck@suse.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-