- 01 2月, 2011 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 31 1月, 2011 11 次提交
-
-
由 H Hartley Sweeten 提交于
This driver does not use any of the functionality provided by the scoop hardware. Remove the unneeded header. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Instead, have the machine driver provide storage for the utility data somehow. For Harmony in particular, store this within struct tegra_harmony, itself referenced by snd_soc_card's drvdata. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Indent with TABs not spaces. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Add DAPM widget definitions for the internal speaker paths. Currently, this path is always enabled while playback is active. Add code to control the speaker amplifier GPIO. The GPIO is requested during _init, since that's the first time it is guaranteed that the WM8903 module is loaded, probed, and hence has exported its GPIO chip. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Previously, snd-soc-tegra-harmony internally instantiated a platform device object whenever the module was loaded. Instead, switch to a more typical model where arch/arm/mach-tegra defines a platform device, and snd-soc-tegra-harmony acts as a driver for such a platform device. Define a new struct tegra_harmony to store driver data in the future. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
All ASoC cards need snd_soc_initialize_card_lists called. Previously, it was only called for cards backed by a "soc-audio" platform device, via soc_probe(). However, it's also needed for cards backed by other platform devices, and registered directly via snd_soc_register_card(). Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Harsha Priya 提交于
This configures the capture unused pins Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Harsha Priya 提交于
Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Harsha Priya 提交于
This patch adds the support for capture path in sn95031 codec. This codec supports upto 6DMICs, 2 AMICs and Linein. The linein and AMICs are connected through a MUX to ADC. The TX paths can be assigned to any of the ADCs or DMICs. Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 1月, 2011 5 次提交
-
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
Provide driver data for cards within the card structure. To simplify the implementation of the PM operations we don't use the struct device driver data as this is used by the core to retrieve the card in callbacks from the device model and PM core. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Stephen Warren 提交于
snd_soc_dapm_put_volsw() has variables for both the unshifted and shifted mask for updates commit 97404f (ASoC: Do DAPM control updates in the middle of DAPM sequences) got confused between the two of these. Since there's no need to keep a copy of the unshifted mask fix this and simplify the code by using only one mask variable. [Completely rewrote the changelog to describe the issue -- broonie.] Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jarkko Nikula 提交于
Commit f6c2ed5d "ASoC: Fix the device references to codec and platform drivers" moved codec and platform driver refcount increments from soc_bind_dai_link to more appropriate places. Adjust a little them so that refcounts are incremented before executing the driver probe functions. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Harsha Priya <priya.harsha@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Manjunathappa, Prakash 提交于
This patch fixes the Kernel panic issue on accessing davinci_vc in cq93vc_probe function. struct davinci_vc is part of platform device's private driver data(codec->dev->p->driver_data) and this is populated by DaVinci Voice Codec MFD driver. Signed-off-by: NManjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 27 1月, 2011 8 次提交
-
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
Allows drivers to distinguish which subsequence is being notified when they get called back. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
Could just as well live in sysfs but sysfs doesn't have the simple value export helpers debugfs does. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
Allow hookup of cards registered directly with the core to the PM operations by exporting the device power management operations to modules, also exporting the default PM operations since it is expected that most cards will end up using exactly the same setup. Note that the callbacks require that the driver data for the card be the snd_soc_card. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
In order to support cards instantiated without using soc-audio remove the use of the platform device in the card probe() and remove() ops. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
The platform device for the card is tied closely to the soc-audio implementation which we're currently trying to remove in favour of allowing cards to have their own devices. Begin removing it by replacing it with the card in the suspend and resume callbacks we give to cards, also taking the opportunity to remove the legacy suspend types which are currently hard coded anyway. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Jarkko Nikula 提交于
Commit f6c2ed5d "ASoC: Fix the device references to codec and platform drivers" moved codec driver refcount increments from soc_bind_dai_link into soc_probe_codec. However, the commit didn't remove try_module_get from soc_probe_aux_dev so the auxiliary device reference counts are incremented twice as the soc_probe_codec is called from soc_probe_aux_dev too. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NAlexander Sverdlin <subaparts@yandex.ru> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 26 1月, 2011 5 次提交
-
-
由 Kuninori Morimoto 提交于
Current format selection of FSI-codecs depended on platform information for FSI, and chip default settings for codecs. It is not understandable/formal method. This patch modify FSI and FSI-codecs to use snd_soc_dai_set_fmt. But FSI can use I2S/PCM and SPDIF format today. It can be selected to I2S/PCM by snd_soc_dai_set_fmt, but can not select SPDIF. So, this patch change FSI platform information to have DAI/SPDIF mode. If platform selects DAI mode (default), FSI-codecs can select I2S/PCM by snd_soc_dai_set_fmt, and if it is SPDIF mode, FSI become SPDIF format. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Current FSI driver assumed master->info is not NULL. This patch allow NULL in master->info Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
-
由 Stephen Warren 提交于
Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NColin Cross <ccross@google.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 1月, 2011 8 次提交
-
-
由 Mark Brown 提交于
-
由 Dmitry Eremin-Solenikov 提交于
ASoC DAI link descriptions for Corgi, Poodle and Spitz platforms contained incorrect names for cpu_dai and codec, which effectievly disabled sound on theese platforms. Fix that errors. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Alexander Sverdlin 提交于
CS4271 CODEC driver adapted to recently introduced error handling in snd_soc_update_bits(). Added snd_soc_cache_sync() error handling. Signed-off-by: NAlexander Sverdlin <subaparts@yandex.ru> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
This patch add platform_device_id which can control PortA/PortB for FSI2-HDMI from platform data. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
We have zero users for PGA controls and the core support for them was removed a while ago so no point in cut'n'pasting them into new macros, even if it's too much hassle to update the existing ones. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Lars-Peter Clausen 提交于
During the multi-component patch the s3c24xx i2s driver was renamed from "s3c24xx-i2s" to "s3c24xx-iis", while the sound board drivers were not updated to reflect this change as well. As a result there is no match between the dai_link and the i2s driver and no sound card is instantiated. This patch fixes the problem by updating the sound board drivers to use "s3c24xx-iis" for the cpu_dai_name. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NJassi Brar <jassi.brar@samsung.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Lars-Peter Clausen 提交于
The id part of an I2C device name is created with the "%d-%04x" format string. So for example for an I2C device which is connected to the adapter with the id 0 and has its address set to 0x1a the id part of the devices name would be "0-001a". Currently some sound board drivers have the id part the codec_name field of their dai_link structures set as if it had been created by a "%d-0x%x" format string. For example "0-0x1a" instead of "0-001a". As a result there is no match between the codec device and the dai_link and no sound card is instantiated. This patch fixes it. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Mark Brown 提交于
We generally refer to registers as unsigned ints (including in the underlying CODEC driver operation). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 24 1月, 2011 1 次提交
-
-
由 Alexander Sverdlin 提交于
Added support for EDB93xx sound with CS4271 CODEC. Features: - Playback, Capture - Sample rates from 8kHz to 96kHz tested Signed-off-by: NAlexander Sverdlin <subaparts@yandex.ru> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 1月, 2011 1 次提交
-
-
由 Kuninori Morimoto 提交于
This patch add snd_soc_dai_ops :: set_fmt to FSI driver and select master/slave clock mode by snd_soc_dai_set_fmt on fsi-xxx.c instead of platform infomation code. This patch remove fsi_is_master function which is no longer needed. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-