- 29 2月, 2008 29 次提交
-
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Wang Chen 提交于
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
The new SCTP socket api (draft 16) updates the AUTH API structures. We never exported these since we knew they would change. Update the rest to match the draft. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
The chunks are stored inside a parameter structure in the kernel and when we copy them to the user, we need to account for the parameter header. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Neil Horman 提交于
I noticed while looking into some odd behavior in sctp, that the variable name sctp_pf_inet6_specific was used twice to represent two different pieces of data (its both a structure name and a pointer to that type of structure), which is confusing to say the least, and potentially dangerous depending on the variable scope. This patch cleans that up, and makes the protocol and address family registration names in SCTP more regular, increasing readability. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> ipv6.c | 12 ++++++------ protocol.c | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-)
-
由 Wang Chen 提交于
As Davem mentioned in his recently patch (d9595a7b) that the procfs visibility should occur after the ->proc_fops are setup. And also, Alexey provide proc_create() to make sure that ->proc_fops is setup before gluing PDE to main tree. We use proc_create(). Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Several endianity corrections in start_xmit() Fixed TSO bug where packets were missing the TCP flags. Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Limit traffic through an internal queue to prevent overflow. Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Fixed locking between fastpath and slowpath operations. Corrected order of traffic disabling to prevent race when going down under traffic. - first have the microcode drop all incoming packets - then do the slowpath stuff - only then reset the MAC Got rid of in_reset_task. Remove_one() and friends would deference a null pointer if init_one failed. Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Some of the HW attentions, used to indicate an error were not properly acked. This will cause the driver to endlessly receive interrupts when such an error happens. Had to break the code into smaller chunks because it got too nested. Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Errata A0.158 workaround. Running in INT#A mode after running with MSI-X fails due to a PCI core bug. Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Errors were summed improperly, some stats were missing. Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
The configuration of RX filtering needed the following corrections: Drop flags need to be set per Rx queue. Have to tell the microcode to collect drop stats, and properly wait for them to complete when going down. Sometimes we failed to detect proper completion due to a logical error in the wait loop. Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Properly protect PHY access between two devices on the same board with a HW lock. Use GPIO to clear all previous configurations before changing link parameters. Shut down the external PHY in case of fan failure. Reducing the MDC/MDIO clock to 2.5MHz due to problems with some devices. Resolve the flow control response according to autoneg with external PHY. Unmasking all PHY interrupts in single write to prevent a race in the interrupts order. LASI indication fixes to work with peculiarities of PHYs. Disable MAC RX to avoid a HW bug when closing the MAC under traffic. Disable parallel detection on HiGig due to HW limitation. Updating the shared memory structure to work with the current bootcode. Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Correct PCI-E info printed by init_one() In one case it failed to free the netdev. Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eliezer Tamir 提交于
Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Because we use shared tfm objects in order to conserve memory, (each tfm requires 128K of vmalloc memory), BH needs to be turned off on output as that can occur in process context. Previously this was done implicitly by the xfrm output code. That was lost when it became lockless. So we need to add the BH disabling to IPComp directly. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
- 28 2月, 2008 11 次提交
-
-
由 Aurelien Jarno 提交于
Switch the SSB PCI core driver to the new SPROM data structure now that the old one has been removed. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Acked-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Alexey Zaytsev 提交于
This may happen e.g. when the ssb is statically enables by the b44 driver, and the b43 pci-ssb bridge is enbled by the b43/b43legacy drivers, or the b43/b43legacy drivers are built statically. Signed-off-by: NAlexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Alexey Zaytsev 提交于
The bridge code was unnecessary enabled by the b44 driver, but it prevents the bcm43xx driver from being loaded, as the bridge claims the same pci ids. Now we enable the birdge only if the b43{legacy} drivers are selected. Signed-off-by: NAlexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Roland Dreier 提交于
The libertas driver exports a number of symbols with no in-tree users; remove these unused exports. lbs_reset_device() is completely unused, with no callers at all, so remove the function completely. A couple of these unused exported symbols are static, which causes the following build error on ia64 with gcc 4.2.3: drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The "goto end;" part definitely must not be rate limited. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt2x00lib_reset_link_tuner() can be called from within the link tuner itself. This means that it should _not_ call rt2x00lib_stop_link_tuner() since that will cause the thread to hang. Reorder the things that should be done during a link tuner reset and during a link tuner start. Also make antenna tuning the last step of the link tuner since it could possibly reset some statistical information which we need for average calculation. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
When rssi_a > rssi_b is true and the current antenna was already antenna A, then rt2x00 incorrectly jumped to antenna B. Also don't configure the antenna when there has been no change in the antenna setup. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
This adds 2 new states which both are used to toggle the RX. These new states are required for usage inside the link tuner thread, because the normal RX toggling will stop the link tuner thread. While it is possible that the link tuner thread itself is the caller of the RX toggle (when using software antenna diversity). Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Fix 2 issues in antenna diversity selection. 1) the following statement will always return true. if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5) It is cleaner to check if the absolute value is smaller then 5. 2) Only enable software diversity when default antenna setup indicates support for it. Don't select it when the hardware does not indicate support for it... Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sebastian Siewior 提交于
| CC drivers/net/ps3_gelic_wireless.o | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c: In function 'gelic_wl_setup_netdev_ops': | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2660: error: 'struct net_device' has no member named 'wireless_data' | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2661: error: 'struct net_device' has no member named 'wireless_handlers' | make[3]: *** [drivers/net/ps3_gelic_wireless.o] Error 1 | make[2]: *** [drivers/net] Error 2 | make[1]: *** [drivers] Error 2 | make[1]: *** Waiting for unfinished jobs.... | make: *** [sub-make] Error 2 Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Acked-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Masakazu Mokuno 提交于
Link the net_device structure of the wireless part to the corresponding device structure. Without this, the sysfs node for this net_device would not have 'device' link. Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-