Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 05 9月, 2009 8 次提交
    • J
      dm raid1: do not allow log_failure variable to unset after being set · d2b69864
      由 Jonathan Brassow 提交于 
      This patch fixes a bug which was triggering a case where the primary leg
could not be changed on failure even when the mirror was in-sync.

The case involves the failure of the primary device along with
the transient failure of the log device.  The problem is that
bios can be put on the 'failures' list (due to log failure)
before 'fail_mirror' is called due to the primary device failure.
Normally, this is fine, but if the log device failure is transient,
a subsequent iteration of the work thread, 'do_mirror', will
reset 'log_failure'.  The 'do_failures' function then resets
the 'in_sync' variable when processing bios on the failures list.
The 'in_sync' variable is what is used to determine if the
primary device can be switched in the event of a failure.  Since
this has been reset, the primary device is incorrectly assumed
to be not switchable.

The case has been seen in the cluster mirror context, where one
machine realizes the log device is dead before the other machines.
As the responsibilities of the server migrate from one node to
another (because the mirror is being reconfigured due to the failure),
the new server may think for a moment that the log device is fine -
thus resetting the 'log_failure' variable.

In any case, it is inappropiate for us to reset the 'log_failure'
variable.  The above bug simply illustrates that it can actually
hurt us.

Cc: stable@kernel.org
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      d2b69864
    • J
      dm log: remove incorrect field from userspace table output · b8313b6d
      由 Jonathan Brassow 提交于 
      The output of 'dmsetup table' includes an internal field that should not
be there.  This patch removes it.  To make the fix simpler, we first
reorder a constructor argument

The 'device size' argument is generated internally.  Currently it is
placed as the last space-separated word of the constructor string.
However, we need to use a version of the string without this word, so we
move it to the beginning instead so it is trivial to skip past it.

We keep a copy of the arguments passed to userspace for creating a log,
just in case we need to resend them.  These are the same arguments that
are desired in the STATUSTYPE_TABLE request, except for one.  When
creating the userspace log, the userspace daemon must know the size of
the mirror, so that is added to the arguments given in the constructor
table.  We were printing this extra argument out as well, which is a
mistake.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      b8313b6d
    • J
      dm log: fix userspace status output · 4142a969
      由 Jonathan Brassow 提交于 
      Fix 'dmsetup table' output.

There is a missing ' ' at the end of the string causing two
words to run together.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      4142a969
    • M
      dm stripe: expose correct io hints · 40bea431
      由 Mike Snitzer 提交于 
      Set sensible I/O hints for striped DM devices in the topology
infrastructure added for 2.6.31 for userspace tools to
obtain via sysfs.

Add .io_hints to 'struct target_type' to allow the I/O hints portion
(io_min and io_opt) of the 'struct queue_limits' to be set by each
target and implement this for dm-stripe.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      40bea431
    • M
      dm table: add more context to terse warning messages · a963a956
      由 Mike Snitzer 提交于 
      A couple of recent warning messages make it difficult for the reader to
determine exactly what is wrong.  This patch adds more information to
those messages.

The messages were added by these commits:
  5dea271b ("dm table: pass correct dev area size
to device_area_is_valid")
  ea9df47c ("dm table: fix blk_stack_limits arg
to use bytes not sectors")

The patch also corrects references to logical_block_size in printk format
strings from %hu to %u.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      a963a956
    • M
      dm table: fix queue_limit checking device iterator · f6a1ed10
      由 Mikulas Patocka 提交于 
      The logic to check for valid device areas is inverted relative to proper
use with iterate_devices.

The iterate_devices method calls its callback for every underlying
device in the target.  If any callback returns non-zero, iterate_devices
exits immediately.  But the callback device_area_is_valid() returns 0 on
error and 1 on success.  The overall effect without is that an error is
issued only if every device is invalid.

This patch renames device_area_is_valid to device_area_is_invalid and
inverts the logic so that one invalid device is sufficient to raise
an error.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      f6a1ed10
    • M
      dm snapshot: implement iterate devices · 8811f46c
      由 Mike Snitzer 提交于 
      Implement the .iterate_devices for the origin and snapshot targets.
dm-snapshot's lack of .iterate_devices resulted in the inability to
properly establish queue_limits for both targets.

With 4K sector drives: an unfortunate side-effect of not establishing
proper limits in either targets' DM device was that IO to the devices
would fail even though both had been created without error.

Commit af4874e0 ("dm target:s introduce
iterate devices fn") in 2.6.31-rc1 should have implemented .iterate_devices
for dm-snap.c's origin and snapshot targets.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      8811f46c
    • K
      dm multipath: fix oops when request based io fails when no paths · a77e28c7
      由 Kiyoshi Ueda 提交于 
      The patch posted at http://marc.info/?l=dm-devel&m=124539787228784&w=2
which was merged into cec47e3d ("dm:
prepare for request based option") introduced a regression in
request-based dm.

If map_request() calls dm_kill_unmapped_request() to complete a cloned
bio without dispatching it, clone->bio is still set when
dm_end_request() is called and the BUG_ON(clone->bio) is incorrect.

The patch fixes this bug by freeing bio in dm_end_request() if the clone
has bio.  I've redone my tests to cover all I/O paths and confirmed
there's no other regression.

Here is the oops I hit in request-based dm when I do I/O to a multipath
device which doesn't have any active path nor queue_if_no_path setting:

------------[ cut here ]------------
kernel BUG at /root/2.6.31-rc4.rqdm/drivers/md/dm.c:828!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
CPU 1
Modules linked in: autofs4 sunrpc cpufreq_ondemand acpi_cpufreq dm_mirror dm_region_hash dm_log dm_service_time dm_multipath scsi_dh dm_mod video output sbs sbshc battery ac sg sr_mod e1000e button cdrom serio_raw rtc_cmos rtc_core rtc_lib piix lpfc scsi_transport_fc ata_piix libata megaraid_sas sd_mod scsi_mod crc_t10dif ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 7, comm: ksoftirqd/1 Not tainted 2.6.31-rc4.rqdm #1 Express5800/120Lj [N8100-1417]
RIP: 0010:[<ffffffffa023629d>]  [<ffffffffa023629d>] dm_softirq_done+0xbd/0x100 [dm_mod]
RSP: 0018:ffff8800280a1f08  EFLAGS: 00010282
RAX: ffffffffa02544e0 RBX: ffff8802aa1111d0 RCX: ffff8802aa1111e0
RDX: ffff8802ab913e70 RSI: 0000000000000000 RDI: ffff8802ab913e70
RBP: ffff8800280a1f28 R08: ffffc90005457040 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffb
R13: ffff8802ab913e88 R14: ffff8802ab9c1438 R15: 0000000000000100
FS:  0000000000000000(0000) GS:ffff88002809e000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000003d54a98640 CR3: 000000029f0a1000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process ksoftirqd/1 (pid: 7, threadinfo ffff8802ae50e000, task ffff8802ae4f8040)
Stack:
 ffff8800280a1f38 0000000000000020 ffffffff814f30a0 0000000000000004
<0> ffff8800280a1f58 ffffffff8116b245 ffff8800280a1f38 ffff8800280a1f38
<0> ffff8800280a1f58 0000000000000001 ffff8800280a1fa8 ffffffff810477bc
Call Trace:
 <IRQ>
 [<ffffffff8116b245>] blk_done_softirq+0x75/0x90
 [<ffffffff810477bc>] __do_softirq+0xcc/0x210
 [<ffffffff81047170>] ? ksoftirqd+0x0/0x110
 [<ffffffff8100ce7c>] call_softirq+0x1c/0x50
 <EOI>
 [<ffffffff8100e785>] do_softirq+0x65/0xa0
 [<ffffffff81047170>] ? ksoftirqd+0x0/0x110
 [<ffffffff810471e0>] ksoftirqd+0x70/0x110
 [<ffffffff81059559>] kthread+0x99/0xb0
 [<ffffffff8100cd7a>] child_rip+0xa/0x20
 [<ffffffff8100c73c>] ? restore_args+0x0/0x30
 [<ffffffff810594c0>] ? kthread+0x0/0xb0
 [<ffffffff8100cd70>] ? child_rip+0x0/0x20
Code: 44 89 e6 48 89 df e8 23 fb f2 e0 be 01 00 00 00 4c 89 f7 e8 f6 fd ff ff 5b 41 5c 41 5d 41 5e c9 c3 4c 89 ef e8 85 fe ff ff eb ed <0f> 0b eb fe 41 8b 85 dc 00 00 00 48 83 bb 10 01 00 00 00 89 83
RIP  [<ffffffffa023629d>] dm_softirq_done+0xbd/0x100 [dm_mod]
 RSP <ffff8800280a1f08>
---[ end trace 16af0a1d8542da55 ]---
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      a77e28c7
  3. 01 9月, 2009 6 次提交
  5. 31 8月, 2009 10 次提交
  7. 30 8月, 2009 2 次提交
  9. 29 8月, 2009 10 次提交
  11. 28 8月, 2009 4 次提交