- 29 8月, 2013 12 次提交
-
-
由 Tomi Valkeinen 提交于
Now that the old panel drivers have been removed, we can remove the old-model API and related code from the DSS encoder drivers. This patch removes the code from the RFBI driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
Now that the old panel drivers have been removed, we can remove the old-model API and related code from the DSS encoder drivers. This patch removes the code from the VENC driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
Now that the old panel drivers have been removed, we can remove the old-model API and related code from the DSS encoder drivers. This patch removes the code from the SDI driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
Now that the old panel drivers have been removed, we can remove the old-model API and related code from the DSS encoder drivers. This patch removes the code from the DSI driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
Now that the old panel drivers have been removed, we can remove the old-model API and related code from the DSS encoder drivers. This patch removes the code from the HDMI driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
Now that the old panel drivers have been removed, we can remove the old-model API and related code from the DSS encoder drivers. This patch removes the code from the DPI driver. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
The board files now use the new panel drivers, making the old panel drivers obsolete. Remove the old panel drivers, Kconfig and Makefile entries, and the panels' platform data structs. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
Regulator handling for DPI and SDI is currently handled in the core.c, using the 'virtual' omapdss platform device. Nowadays we have proper devices for both DPI and SDI, and so we can handle the regulators inside the respective drivers. This patch moves the regulator handling for DPI into dpi.c. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
Regulator handling for DPI and SDI is currently handled in the core.c, using the 'virtual' omapdss platform device. Nowadays we have proper devices for both DPI and SDI, and so we can handle the regulators inside the respective drivers. This patch moves the regulator handling for SDI into sdi.c. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
The DPI and SDI platform devices are currently created with the ID of -1. The ID doesn't currently affect anything. However, we have added regulator supply entries for "omapdss_dpi.0" and "omapdss_sdi.0" to the board files, although these supply entries are not yet used. As the ID used for the devices is -1, these regulator supply entries will not work. To fix the issue, assign ID of 0 to the devices. In the future there may be more than one DPI or SDI output, so it makes sense to have a proper ID for them. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
The 'channel' field in struct omap_dss_device is no longer used, and can be removed. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
由 Tomi Valkeinen 提交于
OMAPDSS's RFBI encoder driver has not been working for some time. The Nokia N800 is the only board in the mainline that uses RFBI, but it has never been fully functional. The RFBI driver needs to be updated to the new panel model, but as the driver is rather unmaintained and there's no way to test the changes, let's mark the driver as broken. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: NArchit Taneja <archit@ti.com>
-
- 28 8月, 2013 20 次提交
-
-
由 Tomi Valkeinen 提交于
The old display drivers are no longer used, and will be phased out. So remove them from the omap2plus_defconfig. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for AM3517EVM board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Note: the management of LCD GPIOs is unclear. They were originally muxed as inputs, and LCD_PANEL_PWR was labelled as "dvi enable". Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for Zoom board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for OMAP3 Pandora board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: NGrazvydas Ignotas <notasas@gmail.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for OMAP3EVM board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for 3430SDP board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for H4 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for cm-t35 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for igep0020 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for OMAP3 Stalker board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for LDP board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for 2430SDP board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use new display drivers for devkit8000 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use the new display drivers for Beagleboard. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use the new display drivers for RX51 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use the new display drivers for OMAP3 Overo board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Note that the LCD add-on boards for lcd43 and lcd35 use the same GPIOs for the panels. This means that both panel devices cannot be probed at the same time. DT will handle this correctly, i.e. the DT data will contain the panel device only for the add-on board that is attached. However, for the board file we need a hackish solution: We parse the kernel boot command line, and see whether lcd43 or lcd35 is set as a default display, and add the given one. Or, if neither is given, default to lcd43. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
4430SDP board has an option for a PicoDLP mini-projector. PicoDLP cannot be used at the same time as the second LCD, and there are GPIOs that need to be set/unset when changing the used display. Managing that kind of board specific setup is not simple without board file callbacks. As only some 4430SDP boards actually have the PicoDLP installed, and 4430SDP boards are not that common in the first place, let's remove PicoDLP data from the board file. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Use the new display drivers for OMAP4 Panda and OMAP4 SDP boards. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Add some of the most common new display drivers to omap2plus_defconfig to be built as modules. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
This is no longer needed as omap4 is now booted using device tree. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
- 19 8月, 2013 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 18 8月, 2013 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fix from Tejun Heo: "This contains one patch to fix the return value of cpuset's cgroups interface function, which used to always return -ENODEV for the writes on the 'memory_pressure_enabled' file" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: fix the return value of cpuset_write_u64()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull jbd2 bug fixes from Ted Ts'o: "Two jbd2 bug fixes, one of which is a regression fix" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: Fix oops in jbd2_journal_file_inode() jbd2: Fix use after free after error in jbd2_journal_dirty_metadata()
-
- 17 8月, 2013 5 次提交
-
-
由 Guenter Roeck 提交于
Fix this build error: In file included from fs/exec.c:61:0: arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned' arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default] arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu': arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end' Broken due to commit 2b047252 ("Fix TLB gather virtual address range invalidation corner cases"). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: NGuenter Roeck <linux@roeck-us.net> [ Oh well. We had build testing for ppc amd um, but no s390 - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
I have taken a different job. I am removing myself as maintainer of GRU. Dimitri will continue to maintain the SGI GRU driver, changing the XP/XPC/XPNET maintainer to Cliff Whickman, but leaving behind my personal email address to answer any questions about the design or operation of the XP family of drivers. Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Commit 0713ed0c added jbd2_journal_file_inode() call into ext4_block_zero_page_range(). However that function gets called from truncate path and thus inode needn't have jinode attached - that happens in ext4_file_open() but the file needn't be ever open since mount. Calling jbd2_journal_file_inode() without jinode attached results in the oops. We fix the problem by attaching jinode to inode also in ext4_truncate() and ext4_punch_hole() when we are going to zero out partial blocks. Reported-by: Nmajianpeng <majianpeng@gmail.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "The usual collection of random fixes. Also some further fixes to the last set of security fixes, and some more from Will (which you may already have in a slightly different form)" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7807/1: kexec: validate CPU hotplug support ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock ARM: 7811/1: locks: use early clobber in arch_spin_trylock ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event() ARM: 7809/1: perf: fix event validation for software group leaders ARM: Fix FIQ code on VIVT CPUs ARM: Fix !kuser helpers case ARM: Fix the world famous typo with is_gate_vma()
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k fixes from Geert Uytterhoeven: "These are two critical fixes, needed by distro kernels, and thus also destined for stable: - The do_div() commit fixes a crash in mounting btrfs volumes, which was a regression from 3.2, - The ARAnyM fix allows to have NatFeat drivers as loadable modules, which is needed for initrds" * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Truncate base in do_div() m68k/atari: ARAnyM - Fix NatFeat module support
-