- 04 4月, 2014 27 次提交
-
-
由 Wengang Wang 提交于
There is a problem that waitqueue_active() may check stale data thus miss a wakeup of threads waiting on ip_unaligned_aio. The valid value of ip_unaligned_aio is only 0 and 1 so we can change it to be of type mutex thus the above prolem is avoid. Another benifit is that mutex which works as FIFO is fairer than wake_up_all(). Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zongxun Wang 提交于
When mounting an ocfs2 volume, it will firstly generate a file /sys/kernel/debug/o2dlm/<uuid>/dlm_state, and then launch the dlm thread. So the following situation will cause a null pointer dereference. dlm_debug_init -> access file dlm_state which will call dlm_state_print -> dlm_launch_thread Move dlm_debug_init after dlm_launch_thread and dlm_launch_recovery_thread can fix this issue. Signed-off-by: NZongxun Wang <wangzongxun@huawei.com> Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Switch the RSPI MSTP clock on SH7757 from a con ID match to a dev ID match, so we can start looking it up using clk_get() with a NULL ID. Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org> Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kuninori Morimoto 提交于
sh7757lcr SDHI register size is 0x100 Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Simon Horman <horms@verge.net.au> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bobby Bingham 提交于
The compiler is permitted to generate code which overwrites the parameters to a function. If those parameters include the only saved copy we have of userspace's registers, we're in trouble. Signed-off-by: NBobby Bingham <koorogi@koorogi.info> Cc: Paul Mundt <paul.mundt@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bobby Bingham 提交于
This does not appear to have been used since commit 74d99a5e ("sh: SH-2A FPU support") in 2007. Signed-off-by: NBobby Bingham <koorogi@koorogi.info> Cc: Paul Mundt <paul.mundt@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bobby Bingham 提交于
When invoking syscall handlers on sh32, the saved userspace registers are at the top of the stack. This seems to have been intentional, as it is an easy way to pass r0, r1, ... to the handler as parameters 5, 6, ... It causes problems, however, because the compiler is allowed to generate code for a function which clobbers that function's own parameters. For example, gcc generates the following code for clone: <SyS_clone>: mov.l 8c020714 <SyS_clone+0xc>,r1 ! 8c020540 <do_fork> mov.l r7,@r15 mov r6,r7 jmp @r1 mov #0,r6 nop .word 0x0540 .word 0x8c02 The `mov.l r7,@r15` clobbers the saved value of r0 passed from userspace. For most system calls, this might not be a problem, because we'll be overwriting r0 with the return value anyway. But in the case of clone, copy_thread will need the original value of r0 if the CLONE_SETTLS flag was specified. The first patch in this series fixes this issue for system calls by pushing to the stack and extra copy of r0-r2 before invoking the handler. We discard this copy before restoring the userspace registers, so it is not a problem if they are clobbered. Exception handlers also receive the userspace register values in a similar manner, and may hit the same problem. The second patch removes the do_fpu_error handler, which looks susceptible to this problem and which, as far as I can tell, has not been used in some time. The third patch addresses other exception handlers. This patch (of 3): The userspace registers are stored at the top of the stack when the syscall handler is invoked, which allows r0-r2 to act as parameters 5-7. Parameters passed on the stack may be clobbered by the syscall handler. The solution is to push an extra copy of the registers which might be used as syscall parameters to the stack, so that the authoritative set of saved register values does not get clobbered. A few system call handlers are also updated to get the userspace registers using current_pt_regs() instead of from the stack. Signed-off-by: NBobby Bingham <koorogi@koorogi.info> Cc: Paul Mundt <paul.mundt@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Opdenacker 提交于
This removes the CPU_SCORE7 Kconfig parameter, which is no longer used anywhere in the source code and Makefiles. Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Beulich 提交于
Recent increased use of typeof() throughout the tree resulted in a number of symbols (25 in a typical distro config of ours) not getting a proper CRC calculated for them anymore, due to the parser in genksyms not coping with several of these uses (interestingly in the majority of [if not all] cases the problem is due to the use of typeof() in code preceding a certain export, not in the declaration/definition of the exported function/object itself; I wasn't able to find a way to address this more general parser shortcoming). The use of parameter_declaration is a little more relaxed than would be ideal (permitting not just a bare type specification, but also one with identifier), but since the same code is being passed through an actual compiler, there's no apparent risk of allowing through any broken code. Otoh using parameter_declaration instead of the ad hoc "decl_specifier_seq '*'" / "decl_specifier_seq" pair allows all types to be handled rather than just plain ones and pointers to plain ones. Signed-off-by: NJan Beulich <jbeulich@suse.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Move code moving event structure to access_list from copy_event_to_user() to fanotify_read() where it is more logical (so that we can immediately see in the main loop that we either move the event to a different list or free it). Also move special error handling for permission events from copy_event_to_user() to the main loop to have it in one place with error handling for normal events. This makes copy_event_to_user() really only copy the event to user without any side effects. Signed-off-by: NJan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Swap the error / "read ok" branches in the main loop of fanotify_read(). We will grow the "read ok" part in the next patch and this makes the indentation easier. Also it is more common to have error conditions inside an 'if' instead of the fast path. Signed-off-by: NJan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
access_mutex is used only to guard operations on access_list. There's no need for sleeping within this lock so just make a spinlock out of it. Signed-off-by: NJan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Currently, fanotify creates new structure to track the fact that permission event has been reported to userspace and someone is waiting for a response to it. As event structures are now completely in the hands of each notification framework, we can use the event structure for this tracking instead of allocating a new structure. Since this makes the event structures for normal events and permission events even more different and the structures have different lifetime rules, we split them into two separate structures (where permission event structure contains the structure for a normal event). This makes normal events 8 bytes smaller and the code a tad bit cleaner. [akpm@linux-foundation.org: fix build] Signed-off-by: NJan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
The prepare_for_access_response() function checks whether group->fanotify_data.bypass_perm is set. However this test can never be true because prepare_for_access_response() is called only from fanotify_read() which means fanotify group is alive with an active fd while bypass_perm is set from fanotify_release() when all file descriptors pointing to the group are closed and the group is going away. Signed-off-by: NJan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fabian Frederick 提交于
nameidata was replaced by flags in commit 00cd8dd3 ("stop passing nameidata to ->lookup()"). Signed-off-by: NFabian Frederick <fabf@skynet.be> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fabian Frederick 提交于
cifs_init_inodecache is only called by __init init_cifs. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Li Zefan 提交于
They don't have to be atomic_t, because they are simple boolean toggles. Signed-off-by: NLi Zefan <lizefan@huawei.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Li Zefan 提交于
Remove kmemleak_padding() and kmemleak_release(). Signed-off-by: NLi Zefan <lizefan@huawei.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Li Zefan 提交于
Currently if kmemleak is disabled, the kmemleak objects can never be freed, no matter if it's disabled by a user or due to fatal errors. Those objects can be a big waste of memory. OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 1200264 1197433 99% 0.30K 46164 26 369312K kmemleak_object With this patch, after kmemleak was disabled you can reclaim memory with: # echo clear > /sys/kernel/debug/kmemleak Also inform users about this with a printk. Signed-off-by: NLi Zefan <lizefan@huawei.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Li Zefan 提交于
Currently if you stop kmemleak thread before disabling kmemleak, kmemleak objects will be freed and so you won't be able to check previously reported leaks. With this patch, kmemleak objects won't be freed if there're leaks that can be reported. Signed-off-by: NLi Zefan <lizefan@huawei.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nishanth Aravamudan 提交于
In the presence of memoryless nodes, numa_node_id() will return the current CPU's NUMA node, but that may not be where we expect to allocate from memory from. Instead, we should rely on the fallback code in the memory allocator itself, by using NUMA_NO_NODE. Also, when calling kthread_create_on_node(), use the nearest node with memory to the cpu in question, rather than the node it is running on. Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Reviewed-by: NChristoph Lameter <cl@linux.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Anton Blanchard <anton@samba.org> Cc: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
After commit 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue") when device is removed while we are writing to it we crash in bdi_writeback_workfn() -> set_worker_desc() because bdi->dev is NULL. This can happen because even though bdi_unregister() cancels all pending flushing work, nothing really prevents new ones from being queued from balance_dirty_pages() or other places. Fix the problem by clearing BDI_registered bit in bdi_unregister() and checking it before scheduling of any flushing work. Fixes: 839a8e86Reviewed-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJan Kara <jack@suse.cz> Cc: Derek Basehore <dbasehore@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Derek Basehore 提交于
bdi_wakeup_thread_delayed() used the mod_delayed_work() function to schedule work to writeback dirty inodes. The problem with this is that it can delay work that is scheduled for immediate execution, such as the work from sync_inodes_sb(). This can happen since mod_delayed_work() can now steal work from a work_queue. This fixes the problem by using queue_delayed_work() instead. This is a regression caused by commit 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue"). The reason that this causes a problem is that laptop-mode will change the delay, dirty_writeback_centisecs, to 60000 (10 minutes) by default. In the case that bdi_wakeup_thread_delayed() races with sync_inodes_sb(), sync will be stopped for 10 minutes and trigger a hung task. Even if dirty_writeback_centisecs is not long enough to cause a hung task, we still don't want to delay sync for that long. We fix the problem by using queue_delayed_work() when we want to schedule writeback sometime in future. This function doesn't change the timer if it is already armed. For the same reason, we also change bdi_writeback_workfn() to immediately queue the work again in the case that the work_list is not empty. The same problem can happen if the sync work is run on the rescue worker. [jack@suse.cz: update changelog, add comment, use bdi_wakeup_thread_delayed()] Signed-off-by: NDerek Basehore <dbasehore@chromium.org> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zento.linux.org.uk> Reviewed-by: NTejun Heo <tj@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Derek Basehore <dbasehore@chromium.org> Cc: Kees Cook <keescook@chromium.org> Cc: Benson Leung <bleung@chromium.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Luigi Semenzato <semenzato@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Dave Chinner <david@fromorbit.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Fleming 提交于
Kees reported the following error: arch/sh/kernel/dumpstack.c: In function 'print_trace_address': arch/sh/kernel/dumpstack.c:118:2: error: format not a string literal and no format arguments [-Werror=format-security] Use the "%s" format so that it's impossible to interpret 'data' as a format string. Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Reported-by: NKees Cook <keescook@chromium.org> Acked-by: NKees Cook <keescook@chromium.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto updates from Herbert Xu: "Here is the crypto update for 3.15: - Added 3DES driver for OMAP4/AM43xx - Added AVX2 acceleration for SHA - Added hash-only AEAD algorithms in caam - Removed tegra driver as it is not functioning and the hardware is too slow - Allow blkcipher walks over AEAD (needed for ARM) - Fixed unprotected FPU/SSE access in ghash-clmulni-intel - Fixed highmem crash in omap-sham - Add (zero entropy) randomness when initialising hardware RNGs - Fixed unaligned ahash comletion functions - Added soft module depedency for crc32c for initrds that use crc32c" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (60 commits) crypto: ghash-clmulni-intel - use C implementation for setkey() crypto: x86/sha1 - reduce size of the AVX2 asm implementation crypto: x86/sha1 - fix stack alignment of AVX2 variant crypto: x86/sha1 - re-enable the AVX variant crypto: sha - SHA1 transform x86_64 AVX2 crypto: crypto_wq - Fix late crypto work queue initialization crypto: caam - add missing key_dma unmap crypto: caam - add support for aead null encryption crypto: testmgr - add aead null encryption test vectors crypto: export NULL algorithms defines crypto: caam - remove error propagation handling crypto: hash - Simplify the ahash_finup implementation crypto: hash - Pull out the functions to save/restore request crypto: hash - Fix the pointer voodoo in unaligned ahash crypto: caam - Fix first parameter to caam_init_rng crypto: omap-sham - Map SG pages if they are HIGHMEM before accessing crypto: caam - Dynamic memory allocation for caam_rng_ctx object crypto: allow blkcipher walks over AEAD data crypto: remove direct blkcipher_walk dependency on transform hwrng: add randomness to system from rng sources ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull security subsystem updates from James Morris: "Apart from reordering the SELinux mmap code to ensure DAC is called before MAC, these are minor maintenance updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) selinux: correctly label /proc inodes in use before the policy is loaded selinux: put the mmap() DAC controls before the MAC controls selinux: fix the output of ./scripts/get_maintainer.pl for SELinux evm: enable key retention service automatically ima: skip memory allocation for empty files evm: EVM does not use MD5 ima: return d_name.name if d_path fails integrity: fix checkpatch errors ima: fix erroneous removal of security.ima xattr security: integrity: Use a more current logging style MAINTAINERS: email updates and other misc. changes ima: reduce memory usage when a template containing the n field is used ima: restore the original behavior for sending data with ima template Integrity: Pass commname via get_task_comm() fs: move i_readcount ima: use static const char array definitions security: have cap_dentry_init_security return error ima: new helper: file_inode(file) kernel: Mark function as static in kernel/seccomp.c capability: Use current logging styles ...
-
- 03 4月, 2014 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next由 Linus Torvalds 提交于
Pull networking updates from David Miller: "Here is my initial pull request for the networking subsystem during this merge window: 1) Support for ESN in AH (RFC 4302) from Fan Du. 2) Add full kernel doc for ethtool command structures, from Ben Hutchings. 3) Add BCM7xxx PHY driver, from Florian Fainelli. 4) Export computed TCP rate information in netlink socket dumps, from Eric Dumazet. 5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas Dichtel. 6) Convert many drivers to pci_enable_msix_range(), from Alexander Gordeev. 7) Record SKB timestamps more efficiently, from Eric Dumazet. 8) Switch to microsecond resolution for TCP round trip times, also from Eric Dumazet. 9) Clean up and fix 6lowpan fragmentation handling by making use of the existing inet_frag api for it's implementation. 10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss. 11) Auto size SKB lengths when composing netlink messages based upon past message sizes used, from Eric Dumazet. 12) qdisc dumps can take a long time, add a cond_resched(), From Eric Dumazet. 13) Sanitize netpoll core and drivers wrt. SKB handling semantics. Get rid of never-used-in-tree netpoll RX handling. From Eric W Biederman. 14) Support inter-address-family and namespace changing in VTI tunnel driver(s). From Steffen Klassert. 15) Add Altera TSE driver, from Vince Bridgers. 16) Optimizing csum_replace2() so that it doesn't adjust the checksum by checksumming the entire header, from Eric Dumazet. 17) Expand BPF internal implementation for faster interpreting, more direct translations into JIT'd code, and much cleaner uses of BPF filtering in non-socket ocntexts. From Daniel Borkmann and Alexei Starovoitov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits) netpoll: Use skb_irq_freeable to make zap_completion_queue safe. net: Add a test to see if a skb is freeable in irq context qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port' net: ptp: move PTP classifier in its own file net: sxgbe: make "core_ops" static net: sxgbe: fix logical vs bitwise operation net: sxgbe: sxgbe_mdio_register() frees the bus Call efx_set_channels() before efx->type->dimension_resources() xen-netback: disable rogue vif in kthread context net/mlx4: Set proper build dependancy with vxlan be2net: fix build dependency on VxLAN mac802154: make csma/cca parameters per-wpan mac802154: allow only one WPAN to be up at any given time net: filter: minor: fix kdoc in __sk_run_filter netlink: don't compare the nul-termination in nla_strcmp can: c_can: Avoid led toggling for every packet. can: c_can: Simplify TX interrupt cleanup can: c_can: Store dlc private can: c_can: Reduce register access can: c_can: Make the code readable ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID updates from Jiri Kosina: - substantial cleanup of the generic and transport layers, in the direction of an ultimate goal of making struct hid_device completely transport independent, by Benjamin Tissoires - cp2112 driver from David Barksdale - a lot of fixes and new hardware support (Dualshock 4) to hid-sony driver, by Frank Praznik - support for Win 8.1 multitouch protocol by Andrew Duggan - other smaller fixes / device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (75 commits) HID: sony: fix force feedback mismerge HID: sony: Set the quriks flag for Bluetooth controllers HID: sony: Fix Sixaxis cable state detection HID: uhid: Add UHID_CREATE2 + UHID_INPUT2 HID: hyperv: fix _raw_request() prototype HID: hyperv: Implement a stub raw_request() entry point HID: hid-sensor-hub: fix sleeping function called from invalid context HID: multitouch: add support for Win 8.1 multitouch touchpads HID: remove hid_output_raw_report transport implementations HID: sony: do not rely on hid_output_raw_report HID: cp2112: remove the last hid_output_raw_report() call HID: cp2112: remove various hid_out_raw_report calls HID: multitouch: add support of other generic collections in hid-mt HID: multitouch: remove pen special handling HID: multitouch: remove registered devices with default behavior HID: hidp: Add a comment that some devices depend on the current behavior of uniq HID: sony: Prevent duplicate controller connections. HID: sony: Perform a boundry check on the sixaxis battery level index. HID: sony: Fix work queue issues HID: sony: Fix multi-line comment styling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial由 Linus Torvalds 提交于
Pull trivial tree updates from Jiri Kosina: "Usual rocket science -- mostly documentation and comment updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: sparse: fix comment doc: fix double words isdn: capi: fix "CAPI_VERSION" comment doc: DocBook: Fix typos in xml and template file Bluetooth: add module name for btwilink driver core: unexport static function create_syslog_header mmc: core: typo fix in printk specifier ARM: spear: clean up editing mistake net-sysfs: fix comment typo 'CONFIG_SYFS' doc: Insert MODULE_ in module-signing macros Documentation: update URL to hfsplus Technote 1150 gpio: update path to documentation ixgbe: Fix format string in ixgbe_fcoe. Kconfig: Remove useless "default N" lines user_namespace.c: Remove duplicated word in comment CREDITS: fix formatting treewide: Fix typo in Documentation/DocBook mm: Fix warning on make htmldocs caused by slab.c ata: ata-samsung_cf: cleanup in header file idr: remove unused prototype of idr_free()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull sched/idle changes from Ingo Molnar: "More idle code reorganization, to prepare for more integration. (Sent separately because it depended on pending timer work, which is now upstream)" * 'sched-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/idle: Add more comments to the code sched/idle: Move idle conditions in cpuidle_idle main function sched/idle: Reorganize the idle loop cpuidle/idle: Move the cpuidle_idle_call function to idle.c idle/cpuidle: Split cpuidle_idle_call main function into smaller functions
-
由 Oleg Nesterov 提交于
pidns_get()->get_pid_ns() can hit ns == NULL. This task_struct can't go away, but task_active_pid_ns(task) is NULL if release_task(task) was already called. Alternatively we could change get_pid_ns(ns) to check ns != NULL, but it seems that other callers are fine. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman ebiederm@xmission.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm updates from Paolo Bonzini: "PPC and ARM do not have much going on this time. Most of the cool stuff, instead, is in s390 and (after a few releases) x86. ARM has some caching fixes and PPC has transactional memory support in guests. MIPS has some fixes, with more probably coming in 3.16 as QEMU will soon get support for MIPS KVM. For x86 there are optimizations for debug registers, which trigger on some Windows games, and other important fixes for Windows guests. We now expose to the guest Broadwell instruction set extensions and also Intel MPX. There's also a fix/workaround for OS X guests, nested virtualization features (preemption timer), and a couple kvmclock refinements. For s390, the main news is asynchronous page faults, together with improvements to IRQs (floating irqs and adapter irqs) that speed up virtio devices" * tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits) KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8 KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode KVM: PPC: Book3S HV: Return ENODEV error rather than EIO KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state KVM: PPC: Book3S HV: Add transactional memory support KVM: Specify byte order for KVM_EXIT_MMIO KVM: vmx: fix MPX detection KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write KVM: s390: clear local interrupts at cpu initial reset KVM: s390: Fix possible memory leak in SIGP functions KVM: s390: fix calculation of idle_mask array size KVM: s390: randomize sca address KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP KVM: Bump KVM_MAX_IRQ_ROUTES for s390 KVM: s390: irq routing for adapter interrupts. KVM: s390: adapter interrupt sources ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull virtio updates from Rusty Russell: "Nothing exciting: virtio-blk users might see a bit of a boost from the doubling of the default queue length though" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio-blk: base queue-depth on virtqueue ringsize or module param Revert a02bbb1c: MAINTAINERS: add virtio-dev ML for virtio virtio: fail adding buffer on broken queues. virtio-rng: don't crash if virtqueue is broken. virtio_balloon: don't crash if virtqueue is broken. virtio_blk: don't crash, report error if virtqueue is broken. virtio_net: don't crash if virtqueue is broken. virtio_balloon: don't softlockup on huge balloon changes. virtio: Use pci_enable_msix_exact() instead of pci_enable_msix() MAINTAINERS: virtio-dev is subscribers only tools/virtio: add a missing ) tools/virtio: fix missing kmemleak_ignore symbol tools/virtio: update internal copies of headers
-
git://git.linaro.org/people/mszyprowski/linux-dma-mapping由 Linus Torvalds 提交于
Pull DMA-mapping updates from Marek Szyprowski: "This contains extension for more efficient handling of io address space for dma-mapping subsystem for ARM architecture" * 'for-3.15' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: arm: dma-mapping: remove order parameter from arm_iommu_create_mapping() arm: dma-mapping: Add support to extend DMA IOMMU mappings
-
git://git.secretlab.ca/git/linux由 Linus Torvalds 提交于
Pull devicetree changes from Grant Likely: "Updates to devicetree core code. This branch contains the following notable changes: - add reserved memory binding - make struct device_node a kobject and remove legacy /proc/device-tree - ePAPR conformance fixes - update in-kernel DTC copy to version v1.4.0 - preparatory changes for dynamic device tree overlays - minor bug fixes and documentation changes The most significant change in this branch is the conversion of struct device_node to be a kobject that is exposed via sysfs and removal of the old /proc/device-tree code. This simplifies the device tree handling code and tightens up the lifecycle on device tree nodes. [updated: added fix for dangling select PROC_DEVICETREE]" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits) dt: Remove dangling "select PROC_DEVICETREE" of: Add support for ePAPR "stdout-path" property of: device_node kobject lifecycle fixes of: only scan for reserved mem when fdt present powerpc: add support for reserved memory defined by device tree arm64: add support for reserved memory defined by device tree of: add missing major vendors of: add vendor prefix for SMSC of: remove /proc/device-tree of/selftest: Add self tests for manipulation of properties of: Make device nodes kobjects so they show up in sysfs arm: add support for reserved memory defined by device tree drivers: of: add support for custom reserved memory drivers drivers: of: add initialization code for dynamic reserved memory drivers: of: add initialization code for static reserved memory of: document bindings for reserved-memory nodes Revert "of: fix of_update_property()" kbuild: dtbs_install: new make target ARM: mvebu: Allows to get the SoC ID even without PCI enabled of: Allows to use the PCI translator without the PCI core ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull more ACPI and power management updates from Rafael Wysocki: "These are commits that were not quite ready when I sent the original pull request for 3.15-rc1 several days ago, but they have spent some time in linux-next since then and appear to be good to go. All of them are fixes and cleanups. Specifics: - Remaining changes from upstream ACPICA release 20140214 that introduce code to automatically serialize the execution of methods creating any named objects which really cannot be executed in parallel with each other anyway (previously ACPICA attempted to address that by aborting methods upon conflict detection, but that wasn't reliable enough and led to other issues). From Bob Moore and Lv Zheng. - intel_pstate fix to use del_timer_sync() instead of del_timer() in the exit path before freeing the timer structure from Dirk Brandewie (original patch from Thomas Gleixner). - cpufreq fix related to system resume from Viresh Kumar. - Serialization of frequency transitions in cpufreq that involve PRECHANGE and POSTCHANGE notifications to avoid ordering issues resulting from race conditions. From Srivatsa S Bhat and Viresh Kumar. - Revert of an ACPI processor driver change that was based on a specific interpretation of the ACPI spec which may not be correct (the relevant part of the spec appears to be incomplete). From Hanjun Guo. - Runtime PM core cleanups and documentation updates from Geert Uytterhoeven. - PNP core cleanup from Michael Opdenacker" * tag 'pm+acpi-3.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Make cpufreq_notify_transition & cpufreq_notify_post_transition static cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end} cpufreq: Make sure frequency transitions are serialized intel_pstate: Use del_timer_sync in intel_pstate_cpu_stop cpufreq: resume drivers before enabling governors PM / Runtime: Spelling s/competing/completing/ PM / Runtime: s/foo_process_requests/foo_process_next_request/ PM / Runtime: GENERIC_SUBSYS_PM_OPS is gone PM / Runtime: Correct documented return values for generic PM callbacks PM / Runtime: Split line longer than 80 characters PM / Runtime: dev_pm_info.runtime_error is signed Revert "ACPI / processor: Make it possible to get APIC ID via GIC" ACPICA: Enable auto-serialization as a default kernel behavior. ACPICA: Ignore sync_level for methods that have been auto-serialized. ACPICA: Add additional named objects for the auto-serialize method scan. ACPICA: Add auto-serialization support for ill-behaved control methods. ACPICA: Remove global option to serialize all control methods. PNP: remove deprecated IRQF_DISABLED
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc non-virtualized cpuidle from Ben Herrenschmidt: "This is the branch I mentioned in my other pull request which contains our improved cpuidle support for the "powernv" platform (non-virtualized). It adds support for the "fast sleep" feature of the processor which provides higher power savings than our usual "nap" mode but at the cost of losing the timers while asleep, and thus exploits the new timer broadcast framework to work around that limitation. It's based on a tip timer tree that you seem to have already merged" * 'powernv-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: cpuidle/powernv: Parse device tree to setup idle states cpuidle/powernv: Add "Fast-Sleep" CPU idle state powerpc/powernv: Add OPAL call to resync timebase on wakeup powerpc/powernv: Add context management for Fast Sleep powerpc: Split timer_interrupt() into timer handling and interrupt handling routines powerpc: Implement tick broadcast IPI as a fixed IPI message powerpc: Free up the slot of PPC_MSG_CALL_FUNC_SINGLE IPI message
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull main powerpc updates from Ben Herrenschmidt: "This time around, the powerpc merges are going to be a little bit more complicated than usual. This is the main pull request with most of the work for this merge window. I will describe it a bit more further down. There is some additional cpuidle driver work, however I haven't included it in this tree as it depends on some work in tip/timer-core which Thomas accidentally forgot to put in a topic branch. Since I didn't want to carry all of that tip timer stuff in powerpc -next, I setup a separate branch on top of Thomas tree with just that cpuidle driver in it, and Stephen has been carrying that in next separately for a while now. I'll send a separate pull request for it. Additionally, two new pieces in this tree add users for a sysfs API that Tejun and Greg have been deprecating in drivers-core-next. Thankfully Greg reverted the patch that removes the old API so this merge can happen cleanly, but once merged, I will send a patch adjusting our new code to the new API so that Greg can send you the removal patch. Now as for the content of this branch, we have a lot of perf work for power8 new counters including support for our new "nest" counters (also called 24x7) under pHyp (not natively yet). We have new functionality when running under the OPAL firmware (non-virtualized or KVM host), such as access to the firmware error logs and service processor dumps, system parameters and sensors, along with a hwmon driver for the latter. There's also a bunch of bug fixes accross the board, some LE fixes, and a nice set of selftests for validating our various types of copy loops. On the Freescale side, we see mostly new chip/board revisions, some clock updates, better support for machine checks and debug exceptions, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits) powerpc/book3s: Fix CFAR clobbering issue in machine check handler. powerpc/compat: 32-bit little endian machine name is ppcle, not ppc powerpc/le: Big endian arguments for ppc_rtas() powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n) powerpc/defconfigs: Enable THP in pseries defconfig powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split powerpc: Rate-limit users spamming kernel log buffer powerpc/perf: Fix handling of L3 events with bank == 1 powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes powerpc/perf: Add kconfig option for hypervisor provided counters powerpc/perf: Add support for the hv 24x7 interface powerpc/perf: Add support for the hv gpci (get performance counter info) interface powerpc/perf: Add macros for defining event fields & formats powerpc/perf: Add a shared interface to get gpci version and capabilities powerpc/perf: Add 24x7 interface headers powerpc/perf: Add hv_gpci interface header powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info) sysfs: create bin_attributes under the requested group powerpc/perf: Enable BHRB access for EBB events powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB ...
-
git://git.linux-mips.org/pub/scm/ralf/upstream-sfr由 Linus Torvalds 提交于
Pull MIPS updates from Ralf Baechle: - Support for Imgtec's Aptiv family of MIPS cores. - Improved detection of BCM47xx configurations. - Fix hiberation for certain configurations. - Add support for the Chinese Loongson 3 CPU, a MIPS64 R2 core and systems. - Detection and support for the MIPS P5600 core. - A few more random fixes that didn't make 3.14. - Support for the EVA Extended Virtual Addressing - Switch Alchemy to the platform PATA driver - Complete unification of Alchemy support - Allow availability of I/O cache coherency to be runtime detected - Improvments to multiprocessing support for Imgtec platforms - A few microoptimizations - Cleanups of FPU support - Paul Gortmaker's fixes for the init stuff - Support for seccomp * 'mips-for-linux-next' of git://git.linux-mips.org/pub/scm/ralf/upstream-sfr: (165 commits) MIPS: CPC: Use __raw_ memory access functions MIPS: CM: use __raw_ memory access functions MIPS: Fix warning when including smp-ops.h with CONFIG_SMP=n MIPS: Malta: GIC IPIs may be used without MT MIPS: smp-mt: Use common GIC IPI implementation MIPS: smp-cmp: Remove incorrect core number probe MIPS: Fix gigaton of warning building with microMIPS. MIPS: Fix core number detection for MT cores MIPS: MT: core_nvpes function to retrieve VPE count MIPS: Provide empty mips_mt_set_cpuoptions when CONFIG_MIPS_MT=n MIPS: Lasat: Replace del_timer by del_timer_sync MIPS: Malta: Setup PM I/O region on boot MIPS: Loongson: Add a Loongson-3 default config file MIPS: Loongson 3: Add CPU hotplug support MIPS: Loongson 3: Add Loongson-3 SMP support MIPS: Loongson: Add Loongson-3 Kconfig options MIPS: Loongson: Add swiotlb to support All-Memory DMA MIPS: Loongson 3: Add serial port support MIPS: Loongson 3: Add IRQ init and dispatch support MIPS: Loongson 3: Add HT-linked PCI support ...
-