Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 24 7月, 2014 1 次提交
  3. 05 6月, 2014 5 次提交
  5. 07 5月, 2014 1 次提交
  7. 26 4月, 2014 1 次提交
    • L
      mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts · 1cf35d47
      由 Linus Torvalds 提交于 
      The mmu-gather operation 'tlb_flush_mmu()' has done two things: the
actual tlb flush operation, and the batched freeing of the pages that
the TLB entries pointed at.

This splits the operation into separate phases, so that the forced
batched flushing done by zap_pte_range() can now do the actual TLB flush
while still holding the page table lock, but delay the batched freeing
of all the pages to after the lock has been dropped.

This in turn allows us to avoid a race condition between
set_page_dirty() (as called by zap_pte_range() when it finds a dirty
shared memory pte) and page_mkclean(): because we now flush all the
dirty page data from the TLB's while holding the pte lock,
page_mkclean() will be held up walking the (recently cleaned) page
tables until after the TLB entries have been flushed from all CPU's.
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: NDave Hansen <dave.hansen@intel.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1cf35d47
  9. 23 4月, 2014 1 次提交
    • L
      mm: make fixup_user_fault() check the vma access rights too · 1b17844b
      由 Linus Torvalds 提交于 
      fixup_user_fault() is used by the futex code when the direct user access
fails, and the futex code wants it to either map in the page in a usable
form or return an error.  It relied on handle_mm_fault() to map the
page, and correctly checked the error return from that, but while that
does map the page, it doesn't actually guarantee that the page will be
mapped with sufficient permissions to be then accessed.

So do the appropriate tests of the vma access rights by hand.

[ Side note: arguably handle_mm_fault() could just do that itself, but
  we have traditionally done it in the caller, because some callers -
  notably get_user_pages() - have been able to access pages even when
  they are mapped with PROT_NONE.  Maybe we should re-visit that design
  decision, but in the meantime this is the minimal patch. ]

Found by Dave Jones running his trinity tool.
Reported-by: NDave Jones <davej@redhat.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1b17844b
  11. 08 4月, 2014 5 次提交
    • M
      mm: remove unused arg of set_page_dirty_balance() · ed6d7c8e
      由 Miklos Szeredi 提交于 
      There's only one caller of set_page_dirty_balance() and that will call it
with page_mkwrite == 0.

The page_mkwrite argument was unused since commit b827e496 "mm: close
page_mkwrite races".
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ed6d7c8e
    • M
      memcg: rename high level charging functions · d715ae08
      由 Michal Hocko 提交于 
      mem_cgroup_newpage_charge is used only for charging anonymous memory so
it is better to rename it to mem_cgroup_charge_anon.

mem_cgroup_cache_charge is used for file backed memory so rename it to
mem_cgroup_charge_file.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d715ae08
    • K
      mm: add debugfs tunable for fault_around_order · 1592eef0
      由 Kirill A. Shutemov 提交于 
      Let's allow people to tweak faultaround at runtime.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ning Qu <quning@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1592eef0
    • K
      mm: introduce vm_ops->map_pages() · 8c6e50b0
      由 Kirill A. Shutemov 提交于 
      Here's new version of faultaround patchset.  It took a while to tune it
and collect performance data.

First patch adds new callback ->map_pages to vm_operations_struct.

->map_pages() is called when VM asks to map easy accessible pages.
Filesystem should find and map pages associated with offsets from
"pgoff" till "max_pgoff".  ->map_pages() is called with page table
locked and must not block.  If it's not possible to reach a page without
blocking, filesystem should skip it.  Filesystem should use do_set_pte()
to setup page table entry.  Pointer to entry associated with offset
"pgoff" is passed in "pte" field in vm_fault structure.  Pointers to
entries for other offsets should be calculated relative to "pte".

Currently VM use ->map_pages only on read page fault path.  We try to
map FAULT_AROUND_PAGES a time.  FAULT_AROUND_PAGES is 16 for now.
Performance data for different FAULT_AROUND_ORDER is below.

TODO:
 - implement ->map_pages() for shmem/tmpfs;
 - modify get_user_pages() to be able to use ->map_pages() and implement
   mmap(MAP_POPULATE|MAP_NONBLOCK) on top.

=========================================================================
Tested on 4-socket machine (120 threads) with 128GiB of RAM.

Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is
somewhere between 3 and 5. Let's say 4 :)

Linux build (make -j60)
FAULT_AROUND_ORDER		Baseline	1		3		4		5		7		9
	minor-faults		283,301,572	247,151,987	212,215,789	204,772,882	199,568,944	194,703,779	193,381,485
	time, seconds		151.227629483	153.920996480	151.356125472	150.863792049	150.879207877	151.150764954	151.450962358
Linux rebuild (make -j60)
FAULT_AROUND_ORDER		Baseline	1		3		4		5		7		9
	minor-faults		5,396,854	4,148,444	2,855,286	2,577,282	2,361,957	2,169,573	2,112,643
	time, seconds		27.404543757	27.559725591	27.030057426	26.855045126	26.678618635	26.974523490	26.761320095
Git test suite (make -j60 test)
FAULT_AROUND_ORDER		Baseline	1		3		4		5		7		9
	minor-faults		129,591,823	99,200,751	66,106,718	57,606,410	51,510,808	45,776,813	44,085,515
	time, seconds		66.087215026	64.784546905	64.401156567	65.282708668	66.034016829	66.793780811	67.237810413

Two synthetic tests: access every word in file in sequential/random order.
It doesn't improve much after FAULT_AROUND_ORDER == 4.

Sequential access 16GiB file
FAULT_AROUND_ORDER		Baseline	1		3		4		5		7		9
 1 thread
	minor-faults		4,195,437	2,098,275	525,068		262,251		131,170		32,856		8,282
	time, seconds		7.250461742	6.461711074	5.493859139	5.488488147	5.707213983	5.898510832	5.109232856
 8 threads
	minor-faults		33,557,540	16,892,728	4,515,848	2,366,999	1,423,382	442,732		142,339
	time, seconds		16.649304881	9.312555263	6.612490639	6.394316732	6.669827501	6.75078944	6.371900528
 32 threads
	minor-faults		134,228,222	67,526,810	17,725,386	9,716,537	4,763,731	1,668,921	537,200
	time, seconds		49.164430543	29.712060103	12.938649729	10.175151004	11.840094583	9.594081325	9.928461797
 60 threads
	minor-faults		251,687,988	126,146,952	32,919,406	18,208,804	10,458,947	2,733,907	928,217
	time, seconds		86.260656897	49.626551828	22.335007632	17.608243696	16.523119035	16.339489186	16.326390902
 120 threads
	minor-faults		503,352,863	252,939,677	67,039,168	35,191,827	19,170,091	4,688,357	1,471,862
	time, seconds		124.589206333	79.757867787	39.508707872	32.167281632	29.972989292	28.729834575	28.042251622
Random access 1GiB file
 1 thread
	minor-faults		262,636		132,743		34,369		17,299		8,527		3,451		1,222
	time, seconds		15.351890914	16.613802482	16.569227308	15.179220992	16.557356122	16.578247824	15.365266994
 8 threads
	minor-faults		2,098,948	1,061,871	273,690		154,501		87,110		25,663		7,384
	time, seconds		15.040026343	15.096933500	14.474757288	14.289129964	14.411537468	14.296316837	14.395635804
 32 threads
	minor-faults		8,390,734	4,231,023	1,054,432	528,847		269,242		97,746		26,881
	time, seconds		20.430433109	21.585235358	22.115062928	14.872878951	14.880856305	14.883370649	14.821261690
 60 threads
	minor-faults		15,733,258	7,892,809	1,973,393	988,266		594,789		164,994		51,691
	time, seconds		26.577302548	25.692397770	18.728863715	20.153026398	21.619101933	17.745086260	17.613215273
 120 threads
	minor-faults		31,471,111	15,816,616	3,959,209	1,978,685	1,008,299	264,635		96,010
	time, seconds		41.835322703	40.459786095	36.085306105	35.313894834	35.814445675	36.552633793	34.289210594

Touch only one page in page table in 16GiB file
FAULT_AROUND_ORDER		Baseline	1		3		4		5		7		9
 1 thread
	minor-faults		8,372		8,324		8,270		8,260		8,249		8,239		8,237
	time, seconds		0.039892712	0.045369149	0.051846126	0.063681685	0.079095975	0.17652406	0.541213386
 8 threads
	minor-faults		65,731		65,681		65,628		65,620		65,608		65,599		65,596
	time, seconds		0.124159196	0.488600638	0.156854426	0.191901957	0.242631486	0.543569456	1.677303984
 32 threads
	minor-faults		262,388		262,341		262,285		262,276		262,266		262,257		263,183
	time, seconds		0.452421421	0.488600638	0.565020946	0.648229739	0.789850823	1.651584361	5.000361559
 60 threads
	minor-faults		491,822		491,792		491,723		491,711		491,701		491,691		491,825
	time, seconds		0.763288616	0.869620515	0.980727360	1.161732354	1.466915814	3.04041448	9.308612938
 120 threads
	minor-faults		983,466		983,655		983,366		983,372		983,363		984,083		984,164
	time, seconds		1.595846553	1.667902182	2.008959376	2.425380942	2.941368804	5.977807890	18.401846125

This patch (of 2):

Introduce new vm_ops callback ->map_pages() and uses it for mapping easy
accessible pages around fault address.

On read page fault, if filesystem provides ->map_pages(), we try to map up
to FAULT_AROUND_PAGES pages around page fault address in hope to reduce
number of minor page faults.

We call ->map_pages first and use ->fault() as fallback if page by the
offset is not ready to be mapped (cold page cache or something).
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ning Qu <quning@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8c6e50b0
    • D
      mm/memory.c: update comment in unmap_single_vma() · 7aa6b4ad
      由 Davidlohr Bueso 提交于 
      The described issue now occurs inside mmap_region().  And unfortunately
is still valid.
Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7aa6b4ad
  13. 05 4月, 2014 1 次提交
    • H
      mm: get_user_pages(write,force) refuse to COW in shared areas · cda540ac
      由 Hugh Dickins 提交于 
      get_user_pages(write=1, force=1) has always had odd behaviour on write-
protected shared mappings: although it demands FMODE_WRITE-access to the
underlying object (do_mmap_pgoff sets neither VM_SHARED nor VM_MAYWRITE
without that), it ends up with do_wp_page substituting private anonymous
Copied-On-Write pages for the shared file pages in the area.

That was long ago intentional, as a safety measure to prevent ptrace
setting a breakpoint (or POKETEXT or POKEDATA) from inadvertently
corrupting the underlying executable.  Yet exec and dynamic loaders open
the file read-only, and use MAP_PRIVATE rather than MAP_SHARED.

The traditional odd behaviour still causes surprises and bugs in mm, and
is probably not what any caller wants - even the comment on the flag
says "You do not want this" (although it's undoubtedly necessary for
overriding userspace protections in some contexts, and good when !write).

Let's stop doing that.  But it would be dangerous to remove the long-
standing safety at this stage, so just make get_user_pages(write,force)
fail with EFAULT when applied to a write-protected shared area.
Infiniband may in future want to force write through to underlying
object: we can add another FOLL_flag later to enable that if required.

Odd though the old behaviour was, there is no doubt that we may turn out
to break userspace with this change, and have to revert it quickly.
Issue a WARN_ON_ONCE to help debug the changed case (easily triggered by
userspace, so only once to prevent spamming the logs); and delay a few
associated cleanups until this change is proved.

get_user_pages callers who might see trouble from this change:
  ptrace poking, or writing to /proc/<pid>/mem
  drivers/infiniband/
  drivers/media/v4l2-core/
  drivers/gpu/drm/exynos/exynos_drm_gem.c
  drivers/staging/tidspbridge/core/tiomap3430.c
if they ever apply get_user_pages to write-protected shared mappings
of an object which was opened for writing.

I went to apply the same change to mm/nommu.c, but retreated.  NOMMU has
no place for COW, and its VM_flags conventions are not the same: I'd be
more likely to screw up NOMMU than make an improvement there.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cda540ac
  15. 04 4月, 2014 8 次提交
  17. 26 2月, 2014 2 次提交
  19. 24 1月, 2014 2 次提交
    • S
      mm: dump page when hitting a VM_BUG_ON using VM_BUG_ON_PAGE · 309381fe
      由 Sasha Levin 提交于 
      Most of the VM_BUG_ON assertions are performed on a page.  Usually, when
one of these assertions fails we'll get a BUG_ON with a call stack and
the registers.

I've recently noticed based on the requests to add a small piece of code
that dumps the page to various VM_BUG_ON sites that the page dump is
quite useful to people debugging issues in mm.

This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what
VM_BUG_ON() does, also dumps the page before executing the actual
BUG_ON.

[akpm@linux-foundation.org: fix up includes]
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      309381fe
    • D
      mm: print more details for bad_page() · f0b791a3
      由 Dave Hansen 提交于 
      bad_page() is cool in that it prints out a bunch of data about the page.
But, I can never remember which page flags are good and which are bad,
or whether ->index or ->mapping is required to be NULL.

This patch allows bad/dump_page() callers to specify a string about why
they are dumping the page and adds explanation strings to a number of
places.  It also adds a 'bad_flags' argument to bad_page(), which it
then dumps out separately from the flags which are actually set.

This way, the messages will show specifically why the page was bad,
*specifically* which flags it is complaining about, if it was a page
flag combination which was the problem.

[akpm@linux-foundation.org: switch to pr_alert]
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f0b791a3
  21. 22 1月, 2014 2 次提交
    • K
      mm: create a separate slab for page->ptl allocation · b35f1819
      由 Kirill A. Shutemov 提交于 
      If DEBUG_SPINLOCK and DEBUG_LOCK_ALLOC are enabled spinlock_t on x86_64
is 72 bytes.  For page->ptl they will be allocated from kmalloc-96 slab,
so we loose 24 on each.  An average system can easily allocate few tens
thousands of page->ptl and overhead is significant.

Let's create a separate slab for page->ptl allocation to solve this.

To make sure that it really works this time, some numbers from my test
machine (just booted, no load):

Before:
  # grep '^\(kmalloc-96\|page->ptl\)' /proc/slabinfo
  kmalloc-96         31987  32190    128   30    1 : tunables  120   60    8 : slabdata   1073   1073     92
After:
  # grep '^\(kmalloc-96\|page->ptl\)' /proc/slabinfo
  page->ptl          27516  28143     72   53    1 : tunables  120   60    8 : slabdata    531    531      9
  kmalloc-96          3853   5280    128   30    1 : tunables  120   60    8 : slabdata    176    176      0

Note that the patch is useful not only for debug case, but also for
PREEMPT_RT, where spinlock_t is always bloated.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b35f1819
    • D
      dma-debug: introduce debug_dma_assert_idle() · 0abdd7a8
      由 Dan Williams 提交于 
      Record actively mapped pages and provide an api for asserting a given
page is dma inactive before execution proceeds.  Placing
debug_dma_assert_idle() in cow_user_page() flagged the violation of the
dma-api in the NET_DMA implementation (see commit 77873803 "net_dma:
mark broken").

The implementation includes the capability to count, in a limited way,
repeat mappings of the same page that occur without an intervening
unmap.  This 'overlap' counter is limited to the few bits of tag space
in a radix tree.  This mechanism is added to mitigate false negative
cases where, for example, a page is dma mapped twice and
debug_dma_assert_idle() is called after the page is un-mapped once.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0abdd7a8
  23. 21 12月, 2013 2 次提交
  25. 21 11月, 2013 1 次提交
  27. 15 11月, 2013 5 次提交
  29. 13 11月, 2013 1 次提交
  31. 29 10月, 2013 1 次提交
    • M
      mm: numa: Sanitize task_numa_fault() callsites · c61109e3
      由 Mel Gorman 提交于 
      There are three callers of task_numa_fault():

 - do_huge_pmd_numa_page():
     Accounts against the current node, not the node where the
     page resides, unless we migrated, in which case it accounts
     against the node we migrated to.

 - do_numa_page():
     Accounts against the current node, not the node where the
     page resides, unless we migrated, in which case it accounts
     against the node we migrated to.

 - do_pmd_numa_page():
     Accounts not at all when the page isn't migrated, otherwise
     accounts against the node we migrated towards.

This seems wrong to me; all three sites should have the same
sementaics, furthermore we should accounts against where the page
really is, we already know where the task is.

So modify all three sites to always account; we did after all receive
the fault; and always account to where the page is after migration,
regardless of success.

They all still differ on when they clear the PTE/PMD; ideally that
would get sorted too.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-8-git-send-email-mgorman@suse.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
      c61109e3
  33. 25 10月, 2013 1 次提交