- 17 6月, 2010 4 次提交
-
-
由 ubuntu@tjworld.net 提交于
BugLink: http://bugs.launchpad.net/bugs/21367 Enable LED by default and update the MODULE_PARM_DESC. The original reason for defaulting to disabled was documented in 2005 and noted, "The LED code has been reported to hang some systems when running ifconfig and is therefore disabled by default." This no longer appears applicable and users have been requesting this be enabled for several years. Signed-off-by: NTJ <ubuntu@tjworld.net> Signed-off-by: NTim Gardner <tim.gardner@canonical.com> Signed-off-by: NAndy Whitcroft <apw@canonical.com> Acked-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NLeann Ogasawara <leann.ogasawara@canonical.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Leann Ogasawara 提交于
The Medion MD40900 device id [0x0cde, 0x0006] is defined twice. Comment out the duplicate. Originally-by: NBen Collins <ben.collins@ubuntu.com> Signed-off-by: NLeann Ogasawara <leann.ogasawara@canonical.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
ZD_REGDOMAIN_JAPAN_ADD and ZD_REGDOMAIN_JAPAN_GW_US54GXS seem a little verbose to me... Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kouhei Sutou 提交于
0x49 is used by PLANEX GW-US54GXS (2019:5303). Signed-off-by: NKouhei Sutou <kou@clear-code.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 6月, 2010 19 次提交
-
-
由 Sujith 提交于
Now that ampdu_action() can sleep, remove all the driver hacks and just issue WMI commands to the target. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
IBSS requires the cwmin and cwmax to be respected when we reset the txqueues on AR9003 otherwise the distribution of beacons will be balanced towards the AR9003 card first preventing equal contention for air time for other peers on the IBSS. Without this IBSS will work but only the AR9003 card will be be issuing beacons on the IBSS. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Legacy rt2870 driver handles WCID differently then we expected, the BSSID and Cipher value are 3 bit values, while the 4th bit should be set elsewhere in an extended field. After this, rt2800usb reports frames have been decrypted successfully, indicating that the Hardware decryption now is working correctly. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Hardware cryptography seems to be working on a 11G network with WPA/WPA2 cryptography enabled. WEP still needs to be tested... Signed-of-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Similar to rt2800pci, remove the check for duplicate register reading, and instead limit the for-loop to the maximum number of TX entries inside a queue. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt2800lib has been under development of the rt2x00 project, so add it to the author string for the module information. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Explicitly enable the usage of fallback rates for the transmission of frames with rt61pci and rt73usb hardware. Note that for txdone reporting, only rt61pci is capable of reporting the fallback rates, for USB it is not possible to determine the number of retries. However the device will use the fallback rates, so it might still help in the performance. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
In some corner cases the reported tx rates/retries didn't match the really used ones. The hardware lowers the tx rate on each consecutive retry by 1 (but won't fall back from MCS to legacy rates) _until_ it reaches the lowest one. In case the frame wasn't sent succesful the number of retries is 7 and if a rate index <7 was used the previous code reported negative rate indexes which were then ignored by the rate control algorithm and mac80211. Instead, report the remaining number of retries to have happened with the lowest rate (index 0). This should give the rate control algorithm slightly more accurate information about the used tx rates/retries. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
Set up max_rates and max_rate_tries with suitable values even if we do not support the whole functionality. As rt2800 has a global fallback table we cannot specify more then one tx rate per frame but since the hw will try several different rates (based on the fallback table) we should still initialize max_rates to the maximum number of rates we are going to try. Otherwise mac80211 will truncate our reported tx rates and the rc algortihm will end up with incorrect data choosing unsuitable rates for tx. This improves throughput on rt2800 devices considerable. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
Fix typo in rt2800_config_txpower. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
Currently rt2800pci will read TX_STA_FIFO until the previously read value matches the current value. However, it is obvious that TX_STA_FIFO only contains values that can easily be the same for multiple consecutive frames (especially when communicating with only one other STA). Hence, we often ended up with reading only the first entry and ignoring the rest. One result was that when the TX_STA_FIFO contained multiple entires, only the first one was read and properly handled while the others remained in the tx queue. Thus, drop this check but introduce a maximum number of reads. All legacy drivers use the size of the tx ring as limit but state that the TX_STA_FIFO has only 16 entries. So, let's just stick with the tx ring size for now. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
Add a comment about the meaning of BBP1_TX_POWER stating all possible values. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
IEEE80211_TX_CTL_MORE_FRAMES indicates that more frames are queued for tx but has nothing to do with fragmentation. Hence, don't set ENTRY_TXD_MORE_FRAG but only ENTRY_TXD_BURST to not kick the tx queues immediately. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
TXDONE_FALLBACK expresses that fallback rates were used for retries. Hence, it only makes sense to set the flag if retries > 0. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
TXDONE_FALLBACK doesn't express if the frame was sent successful or not. It only tells us that the hw used fallback rates for retries. Hence, don't use TXDONE_FALLBACK as success indicator. Before this patch we reported success to the rate control algorithm which was wrong in a number of cases and might have lead to improper tx rate selections. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
Update the documentation of the available txdone flags to better express how they should be used. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
When management frame protection (IEEE 802.11w) is used, we must use a separate counter for tracking received CCMP packet number for the management frames. The previously used NUM_RX_DATA_QUEUESth queue was shared with data frames when QoS was not used and that can cause problems in detecting replays incorrectly for robust management frames. Add a new counter just for robust management frames to avoid this issue. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jouni Malinen 提交于
When management frame protection (IEEE 802.11w) is used, Deauthentication frame needs to be protected when the pairwise key is configured. mac80211 was removing the station entry (and its keys) before actually sending out the Deauthentication frame. Fix this by reordering the code to send the frame before the station entry gets removed. This matches an earlier change that handled the Disassociation frame processing, but missed Deauthentication frames. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
The ps-qos latency handling is broken. It uses predetermined latency values to select specific dynamic PS timeouts. With common AP configurations, these values overlap with beacon interval and are therefore essentially useless (for network latencies less than the beacon interval, PSM is disabled.) This patch remedies the problem by replacing the predetermined network latency values with one high value (1900ms) which is used to go trigger full psm. For backwards compatibility, the value 2000ms is still mapped to a dynamic ps timeout of 100ms. Currently also the mac80211 internal value for storing user space configured dynamic PSM values is incorrectly in the driver visible ieee80211_conf struct. Move it to the ieee80211_local struct. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 15 6月, 2010 17 次提交
-
-
由 Juuso Oikarinen 提交于
There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009e #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Teemu Paasikivi 提交于
Remove BSS from cfg80211 BSS list if we are only member in IBSS when leaving it. Signed-off-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Teemu Paasikivi 提交于
Add changed basic rates flag to bss_changed while joinig ibss network. This patch is split from the patch containing support for setting basic rates when creating ibss network. Original patch was posted by Johannes Berg on the linux-wireless posting list. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Teemu Paasikivi 提交于
This patch adds support to nl80211 and mac80211 to set basic rates when joining/creating ibss network. Original patch was posted by Johannes Berg on the linux-wireless posting list. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
This capability check is no longer used, so it can be removed along with the now-obsolete ath9k_hw_getcapability function. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
mac80211 already masks the HT sta capabilities based on hardware support Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
The driver always sets this to enabled, but this can be simplified with a small change to ah->sta_id1_defaults instead. This change also removes the now-obsolete ath9k_hw_setcapability function. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
This is only used as a workaround for an issue in one specific hw revision. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
TKIP MIC support is always enabled anyway. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
replace calls that read this capability with accesses to ath9k_hw's regulatory data. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
All of the ciphers that are tested for are always supported Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
All AR9003 features are now complete so enable AR9003 support. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
ath9k_hw_setmac() only copies the mac address it is called with into common->macaddr, yet in all call sites, the supplied mac address pointer is already common->macaddr. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-