- 13 11月, 2006 3 次提交
-
-
由 pasky@ucw.cz 提交于
This changes it from TDA8290 which is allegedly very unlikely to TD1316 which is allegedly very likely. I didn't get it to work with either, but expected that this got applied when Mauro sent it to me, so here it goes again; feel free to drop it to the floor. :-) Signed-off-by: NPetr Baudis <pasky@ucw.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 pasky@ucw.cz 提交于
The remote as well as the GPIO interface is the same as what comes with 777. For an example of mplayer lirc configuration, see http://pasky.or.cz/~pasky/dev/v4l/lircrcSigned-off-by: NPetr Baudis <pasky@ucw.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 pasky@ucw.cz 提交于
I didn't test it personally since I don't have this card, but A16AR uses the same interface and that one certainly does work perfectly (see the next patch). This patch was originally sent in http://marc.theaimsgroup.com/?l=linux-video&m=114743413825375&w=2 https://www.redhat.com/mailman/private/video4linux-list/2006-May/msg00103.html but never got applied. This version has some trivial modifications and drops the weird gpio hack (it's not clear what practical purpose does it serve). Signed-off-by: NJose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: NPetr Baudis <pasky@ucw.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 04 10月, 2006 2 次提交
-
-
由 Hartmut Hackmann 提交于
This is a analog DVB-T hybrid board Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Petr Baudis 提交于
This adds support for a hybrid PAL/DVB/FM card. Unfortunately I tested only the DVB since I don't have any proper antenna available and I can receive even the DVB just barely so; I can hear noise in the FM part but I couldn't catch any station, then again I don't have an FM antenna either. The PAL/FM and IR control data are based on what I harvested on the 'net. Perhaps I or someone else will fix them if they turn out to be wrong. Signed-off-by: NPetr Baudis <pasky@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 9月, 2006 5 次提交
-
-
由 Michal Majchrowicz 提交于
Add card support for Proteus Pro 2309, based on saa7130 bridge Signed-off-by: NMichal Majchrowicz <mmajchrowicz@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Igor M. Liplianin 提交于
Add support for Acorp TV134DS and FlyDVB-S cards (both based on tda10086+tda826x) Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
It is just another Lifeview clone Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
The change is just an additional PCI ID Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
Analog TV, CVBS, S-video and DVB-T are working, DVB-S not yet Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 6月, 2006 2 次提交
-
-
由 Trent Piepho 提交于
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Zac Bowling 提交于
Add detection for the LifeView3000 NTSC model (right now the PAL version is the only one in there, which is sort of annoying for me living in the US and all.. sigh...) This is one of those things that I like to classify "as a works for me so take it or leave it" :-) . Not that worried because its an $18 video capture card that didn't look it was selling to well in the US, but then again who knows. The documentation needs updating too I bet but its behind anyways usually to what is in the code. Signed-off-by: NZac Bowling <zac@zacbowling.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 13 5月, 2006 1 次提交
-
-
由 Mikhail Gusarov 提交于
There is a missing break in card initialization function. Might screw up initialization of Terratec Cinergy 400 TV. Signed-off-by: NMikhail Gusarov <dottedmag@dottedmag.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 02 4月, 2006 3 次提交
-
-
由 Hartmut Hackmann 提交于
There seem to be many variants of this cards with different feature sets. This entry supports analog TV, CVBS and s-video input, FM radio and DVB-T if they are supported by the hardware. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
The .vmux entry needs to be 1 instead of 0 Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
Added ID entries for the Genius VideoWonder DVB-T and the LifeView FlyTV Platinum Gold Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 22 3月, 2006 6 次提交
-
-
由 Michael Krufky 提交于
The device, Medion 7134, has two saa7134 chips on it, but only one of them is functional in the current saa7134 driver. This patch adds autodetection for the second, unsupported saa7134 chip, as SAA7134_BOARD_MD7134_BRIDGE_2, and displays a message to the user (in dmesg) indicating that the second chip isn't yet functional. This is useful for users, since two instances of the saa7134 driver will spawn. This patch will prevent confusion by warning the user that only one of the chips on the board are functional. There are other versions of the SAA7134_BOARD_MD7134 with only a single saa7134 bridge/decoder -- those devices will not be affected by this patch. Only devices containing the second chip will display the warning. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
There are already some supported devices that contain two saa713x chips on-board, where only one of these chips is currently functional in the driver. We are already printing a warning message for the second saa7134 decoder in SAA7134_BOARD_AVERMEDIA_A169_B. This patch alters that case to make it generic, so that other cards in the same situation can use it. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Rickard Osser 提交于
- Added support for AVerMedia A169 Dual Analog tuner card (dual saa7134 decoders - only 1 working right now) - Added autodetection for both parts of the card. It shows up like 2 cards, B1 and B - Enabled tuner B1, SVIDEO on B1 and composite1 through SVIDEO, FIXME: B is more or less dead at this point and I suspect the FM-radio is on the B part of the board Signed-off-by: NRickard Osser <ricky@osser.se> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- added tuner_lg_taln_pal_secam_ranges - renamed tuner 66 from TUNER_LG_NTSC_TALN_MINI to TUNER_LG_TALN - updated FlyTV mini Asus Digimatrix with new tuner Thanks-to: Rickard Osser <ricky@osser.se> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- matched indents on quotes within a printk Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 08 3月, 2006 2 次提交
-
-
由 Adrian Bunk 提交于
I have the same card with the same PCI id, but from KWorld. The patch documents that this is the same card. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
- Init message was sent to wrong slave address - Deleted outdated comment Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 04 3月, 2006 4 次提交
-
-
由 Hartmut Hackmann 提交于
- fixed tda9886 port 2 setting - turned remote control receiver off via saa7134 GPIO to avoid i2c hangs - modified tda9886 client calls to direct i2c access to allow proper return to analog mode - allow mode change to V4L2_TUNER_DIGITAL_TV in tuner VIDIOC_S_FREQUENCY client call Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- ELSA EX-VISION 500TV was incorrectly programmed to have the same subsystem ID as ELSA EX-VISION 300TV, (1048:226b) - This changeset replaces the incorrect subsystem ID (1048:226b) with the correct one (1048:226a) for the ELSA EX-VISION 500TV. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
The probing code for tda8290 changes the state of the tda9887 GP ports. The patch assumes that if probing for tda8290 failed, this must be a tda9887 and restores its power on defaults. This should solve the module load order issue with some pinnacle cards. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Karsten Suehring 提交于
This patch adds another composite input to the Pinnacle PCTV 100i definition which filters the chrominace signal from the luma input. This improves video quality for Composite signals on the S-Video connector of the card. In addition the name string of the card is changed to include PCTV 40i and 50i since these cards are identical. Signed-off-by: NKarsten Suehring <ksuehring@gmx.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 03 3月, 2006 4 次提交
-
-
由 Michael Krufky 提交于
- ELSA EX-VISION 500TV was incorrectly programmed to have the same subsystem ID as ELSA EX-VISION 300TV, (1048:226b) - This changeset replaces the incorrect subsystem ID (1048:226b) with the correct one (1048:226a) for the ELSA EX-VISION 500TV. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Corrected autodetection for saa7130 card: subsystem: 1048:226c, board: ELSA EX-VISION 700TV Signed-off-by: NTAMUKI Shoichi <tamuki@linet.gr.jp> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Nico Sabbi 提交于
This patch adds DVB-T support, no DVB-S yet Signed-off-by: NNico Sabbi <nsabbi@tiscali.it> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
- fixed tda9886 port 2 setting - turned remote control receiver off via saa7134 GPIO to avoid i2c hangs - modified tda9886 client calls to direct i2c access to allow proper return to analog mode - allow mode change to V4L2_TUNER_DIGITAL_TV in tuner VIDIOC_S_FREQUENCY client call Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 27 2月, 2006 8 次提交
-
-
由 Michael Krufky 提交于
Make buffer a static const Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
The probing code for tda8290 changes the state of the tda9887 GP ports. The patch assumes that if probing for tda8290 failed, this must be a tda9887 and restores its power on defaults. This should solve the module load order issue with some pinnacle cards. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Rudo Thomas 提交于
The remote controller on the LifeView FlyDVB-T Duo card work flawlessly with the same settings as the LifeView FlyDVB-T LR301 card. Signed-off-by: NRudo Thomas <rudo@matfyz.cz> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Curt Meyers 提交于
- Enable the tuv1236 tuner on the Kworld-ATSC110 card so that the tuner can be identified when tuners.ko loads. - With this change it is no longer necessary to remove and reload the tuner module in order to get the tuv1236 identified. - This code was copied from the ATI HDTV Wonder init routine (in cx88-cards.c) which also uses the TUV1236D. Signed-off-by: NCurt Meyers <cmeyers@boilerbots.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- There is no radio with this tuner card... Thanks-to: Dwaine Garden <DwaineGarden@rogers.com> - fixed capitalization in card name. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Curt Meyers 提交于
- corrected composite input. - verified s-video input. Signed-off-by: NCurt Meyers <cmeyers@boilerbots.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew Burri 提交于
Signed-off-by: NAndrew Burri <andrew.burri@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Karsten Suehring 提交于
This patch adds another composite input to the Pinnacle PCTV 100i definition which filters the chrominace signal from the luma input. This improves video quality for Composite signals on the S-Video connector of the card. In addition the name string of the card is changed to include PCTV 40i and 50i since these cards are identical. Signed-off-by: NKarsten Suehring <ksuehring@gmx.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-