- 26 6月, 2015 1 次提交
-
-
由 Dominik Dingel 提交于
There is a potential bug with KVM and hugetlbfs if the hardware does not support hugepages (EDAT1). We fix this by making EDAT1 a hard requirement for hugepages and therefore removing and simplifying code. As s390, with the sw-emulated hugepages, was the only user of arch_prepare/release_hugepage I also removed theses calls from common and other architecture code. This patch (of 5): By dropping support for hugepages on machines which do not have the hardware feature EDAT1, we fix a potential s390 KVM bug. The bug would happen if a guest is backed by hugetlbfs (not supported currently), but does not get pagetables with PGSTE. This would lead to random memory overwrites. Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 6月, 2015 39 次提交
-
-
由 Linus Torvalds 提交于
Merge first patchbomb from Andrew Morton: - a few misc things - ocfs2 udpates - kernel/watchdog.c feature work (took ages to get right) - most of MM. A few tricky bits are held up and probably won't make 4.2. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (91 commits) mm: kmemleak_alloc_percpu() should follow the gfp from per_alloc() mm, thp: respect MPOL_PREFERRED policy with non-local node tmpfs: truncate prealloc blocks past i_size mm/memory hotplug: print the last vmemmap region at the end of hot add memory mm/mmap.c: optimization of do_mmap_pgoff function mm: kmemleak: optimise kmemleak_lock acquiring during kmemleak_scan mm: kmemleak: avoid deadlock on the kmemleak object insertion error path mm: kmemleak: do not acquire scan_mutex in kmemleak_do_cleanup() mm: kmemleak: fix delete_object_*() race when called on the same memory block mm: kmemleak: allow safe memory scanning during kmemleak disabling memcg: convert mem_cgroup->under_oom from atomic_t to int memcg: remove unused mem_cgroup->oom_wakeups frontswap: allow multiple backends x86, mirror: x86 enabling - find mirrored memory ranges mm/memblock: allocate boot time data structures from mirrored memory mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute mm: do not ignore mapping_gfp_mask in page cache allocation paths mm/cma.c: fix typos in comments mm/oom_kill.c: print points as unsigned int mm/hugetlb: handle races in alloc_huge_page and hugetlb_reserve_pages ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull pstore updates from Tony Luck: "Miscellaneous pstore improvements" * tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ramoops: make it possible to change mem_type param. pstore/ram: verify ramoops header before saving record fs/pstore: Optimization function ramoops_init_przs fs/pstore: update the backend parameter in pstore module pstore: do not use message compression without lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs由 Linus Torvalds 提交于
Pull f2fs updates from Jaegeuk Kim: "New features: - per-file encryption (e.g., ext4) - FALLOC_FL_ZERO_RANGE - FALLOC_FL_COLLAPSE_RANGE - RENAME_WHITEOUT Major enhancement/fixes: - recovery broken superblocks - enhance f2fs_trim_fs with a discard_map - fix a race condition on dentry block allocation - fix a deadlock during summary operation - fix a missing fiemap result .. and many minor bug fixes and clean-ups were done" * tag 'for-f2fs-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (83 commits) f2fs: do not trim preallocated blocks when truncating after i_size f2fs crypto: add alloc_bounce_page f2fs crypto: fix to handle errors likewise ext4 f2fs: drop the volatile_write flag only f2fs: skip committing valid superblock f2fs: setting discard option in parse_options() f2fs: fix to return exact trimmed size f2fs: support FALLOC_FL_INSERT_RANGE f2fs: hide common code in f2fs_replace_block f2fs: disable the discard option when device doesn't support f2fs crypto: remove alloc_page for bounce_page f2fs: fix a deadlock for summary page lock vs. sentry_lock f2fs crypto: clean up error handling in f2fs_fname_setup_filename f2fs crypto: avoid f2fs_inherit_context for symlink f2fs crypto: do not set encryption policy for non-directory by ioctl f2fs crypto: allow setting encryption policy once f2fs crypto: check context consistent for rename2 f2fs: avoid duplicated code by reusing f2fs_read_end_io f2fs crypto: use per-inode tfm structure f2fs: recovering broken superblock during mount ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull UDF fixes and cleanups from Jan Kara: "The contains some small fixes and improvements in error handling for UDF. Bundled is also one ext3 coding style fix and a fix in quota documentation" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: fix udf_load_pvoldesc() udf: remove double err declaration in udf_file_write_iter() UDF: support NFSv2 export fs: ext3: super: fixed a space coding style issue quota: Update documentation udf: Return error from udf_find_entry() udf: Make udf_get_filename() return error instead of 0 length file name udf: bug on exotic flag in udf_get_filename() udf: improve error management in udf_CS0toNLS() udf: improve error management in udf_CS0toUTF8() udf: unicode: update function name in comments udf: remove unnecessary test in udf_build_ustr_exact() udf: Return -ENOMEM when allocation fails in udf_get_filename()
-
git://git.lwn.net/linux-2.6由 Linus Torvalds 提交于
Pull documentation updates from Jonathan Corbet: "The main thing here is Ingo's big subdirectory documenting feature support for each architecture. Beyond that, it's the usual pile of fixes, tweaks, and small additions" * tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (79 commits) doc:md: fix typo in md.txt. Documentation/mic/mpssd: don't build x86 userspace when cross compiling Documentation/prctl: don't build tsc tests when cross compiling Documentation/vDSO: don't build tests when cross compiling Doc:ABI/testing: Fix typo in sysfs-bus-fcoe Doc: Docbook: Change wikipedia's URL from http to https in scsi.tmpl Doc: Change wikipedia's URL from http to https Documentation/kernel-parameters: add missing pciserial to the earlyprintk Doc:pps: Fix typo in pps.txt kbuild : Fix documentation of INSTALL_HDR_PATH Documentation: filesystems: updated struct file_operations documentation in vfs.txt kbuild: edit explanation of clean-files variable Doc: ja_JP: Fix typo in HOWTO Move freefall program from Documentation/ to tools/ Documentation: ARM: EXYNOS: Describe boot loaders interface Doc:nfc: Fix typo in nfc-hci.txt vfs: Minor documentation fix Doc: networking: txtimestamp: fix printf format warning Documentation, intel_pstate: Improve legacy mode internal governors description Documentation: extend use case for EXPORT_SYMBOL_GPL() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem updates from Dmitry Torokhov: "Thanks to Samuel Thibault input device (keyboard) LEDs are no longer hardwired within the input core but use LED subsystem and so allow use of different triggers; Hans de Goede did a large update for the ALPS touchpad driver; we have new TI drv2665 haptics driver and DA9063 OnKey driver, and host of other drivers got various fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits) Input: pixcir_i2c_ts - fix receive error MAINTAINERS: remove non existent input mt git tree Input: improve usage of gpiod API tty/vt/keyboard: define LED triggers for VT keyboard lock states tty/vt/keyboard: define LED triggers for VT LED states Input: export LEDs as class devices in sysfs Input: cyttsp4 - use swap() in cyttsp4_get_touch() Input: goodix - do not explicitly set evbits in input device Input: goodix - export id and version read from device Input: goodix - fix variable length array warning Input: goodix - fix alignment issues Input: add OnKey driver for DA9063 MFD part Input: elan_i2c - add product IDs FW names Input: elan_i2c - add support for multi IC type and iap format Input: focaltech - report finger width to userspace tty: remove platform_sysrq_reset_seq Input: synaptics_i2c - use proper boolean values Input: psmouse - use true instead of 1 for boolean values Input: cyapa - fix a few typos in comments Input: stmpe-ts - enforce device tree only mode ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
Pull EDAC updates from Borislav Petkov: - New APM X-Gene SoC EDAC driver (Loc Ho) - AMD error injection module improvements (Aravind Gopalakrishnan) - Altera Arria 10 support (Thor Thayer) - misc fixes and cleanups all over the place * tag 'edac_for_4.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (28 commits) EDAC: Update Documentation/edac.txt EDAC: Fix typos in Documentation/edac.txt EDAC, mce_amd_inj: Set MISCV on injection EDAC, mce_amd_inj: Move bit preparations before the injection EDAC, mce_amd_inj: Cleanup and simplify README EDAC, altera: Do not allow suspend when EDAC is enabled EDAC, mce_amd_inj: Make inj_type static arm: socfpga: dts: Add Arria10 SDRAM EDAC DTS support EDAC, altera: Add Arria10 EDAC support EDAC, altera: Refactor for Altera CycloneV SoC EDAC, altera: Generalize driver to use DT Memory size EDAC, mce_amd_inj: Add README file EDAC, mce_amd_inj: Add individual permissions field to dfs_node EDAC, mce_amd_inj: Modify flags attribute to use string arguments EDAC, mce_amd_inj: Read out number of MCE banks from the hardware EDAC, mce_amd_inj: Use MCE_INJECT_GET macro for bank node too EDAC, xgene: Fix cpuid abuse EDAC, mpc85xx: Extend error address to 64 bit EDAC, mpc8xxx: Adapt for FSL SoC EDAC, edac_stub: Drop arch-specific include ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control updates from Linus Walleij: "Here is the bulk of pin control changes for the v4.2 series: Quite a lot of new SoC subdrivers and two new main drivers this time, apart from that business as usual. Details: Core functionality: - Enable exclusive pin ownership: it is possible to flag a pin controller so that GPIO and other functions cannot use a single pin simultaneously. New drivers: - NXP LPC18xx System Control Unit pin controller - Imagination Pistachio SoC pin controller New subdrivers: - Freescale i.MX7d SoC - Intel Sunrisepoint-H PCH - Renesas PFC R8A7793 - Renesas PFC R8A7794 - Mediatek MT6397, MT8127 - SiRF Atlas 7 - Allwinner A33 - Qualcomm MSM8660 - Marvell Armada 395 - Rockchip RK3368 Cleanups: - A big cleanup of the Marvell MVEBU driver rectifying it to correspond to reality - Drop platform device probing from the SH PFC driver, we are now a DT only shop for SuperH - Drop obsolte multi-platform check for SH PFC - Various janitorial: constification, grammar etc Improvements: - The AT91 GPIO portions now supports the set_multiple() feature - Split out SPI pins on the Xilinx Zynq - Support DTs without specific function nodes in the i.MX driver" * tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: rockchip: add support for the rk3368 pinctrl: rockchip: generalize perpin driver-strength setting pinctrl: sh-pfc: r8a7794: add SDHI pin groups pinctrl: sh-pfc: r8a7794: add MMCIF pin groups pinctrl: sh-pfc: add R8A7794 PFC support pinctrl: make pinctrl_register() return proper error code pinctrl: mvebu: armada-39x: add support for Armada 395 variant pinctrl: mvebu: armada-39x: add missing SATA functions pinctrl: mvebu: armada-39x: add missing PCIe functions pinctrl: mvebu: armada-38x: add ptp functions pinctrl: mvebu: armada-38x: add ua1 functions pinctrl: mvebu: armada-38x: add nand functions pinctrl: mvebu: armada-38x: add sata functions pinctrl: mvebu: armada-xp: add dram functions pinctrl: mvebu: armada-xp: add nand rb function pinctrl: mvebu: armada-xp: add spi1 function pinctrl: mvebu: armada-39x: normalize ref clock naming pinctrl: mvebu: armada-xp: rename spi to spi0 pinctrl: mvebu: armada-370: align spi1 clock pin naming pinctrl: mvebu: armada-370: align VDD cpu-pd pin naming with datasheet ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight由 Linus Torvalds 提交于
Pull backlight updates from Lee Jones: "Changes to existing drivers: - supply MODULE_DEVICE_TABLE() to ensure probing - constify struct; da9052_bl - enable compile test; lcd_l4f00242t03, lcd_lms283fg05, backlight_gpio - suspend/resume bugfix; lp855x_bl - devm_gpiod_get_optional() API fixup; pwm_bl - error handling fixup; backlight" * tag 'backlight-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: Change the return type of backlight_update_status() to int backlight: pwm_bl: Simplify usage of devm_gpiod_get_optional backlight: lp855x: Don't clear level on suspend/blank backlight: Allow compile test of GPIO consumers if !GPIOLIB video: backlight: da9052: Constify platform_device_id gpio-backlight: Discover driver during boot time
-
由 Larry Finger 提交于
Beginning at commit d52d3997 ("ipv6: Create percpu rt6_info"), the following INFO splat is logged: =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc7-next-20150612 #1 Not tainted ------------------------------- kernel/sched/core.c:7318 Illegal context switch in RCU-bh read-side critical section! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 3 locks held by systemd/1: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815f0c8f>] rtnetlink_rcv+0x1f/0x40 #1: (rcu_read_lock_bh){......}, at: [<ffffffff816a34e2>] ipv6_add_addr+0x62/0x540 #2: (addrconf_hash_lock){+...+.}, at: [<ffffffff816a3604>] ipv6_add_addr+0x184/0x540 stack backtrace: CPU: 0 PID: 1 Comm: systemd Not tainted 4.1.0-rc7-next-20150612 #1 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014 Call Trace: dump_stack+0x4c/0x6e lockdep_rcu_suspicious+0xe7/0x120 ___might_sleep+0x1d5/0x1f0 __might_sleep+0x4d/0x90 kmem_cache_alloc+0x47/0x250 create_object+0x39/0x2e0 kmemleak_alloc_percpu+0x61/0xe0 pcpu_alloc+0x370/0x630 Additional backtrace lines are truncated. In addition, the above splat is followed by several "BUG: sleeping function called from invalid context at mm/slub.c:1268" outputs. As suggested by Martin KaFai Lau, these are the clue to the fix. Routine kmemleak_alloc_percpu() always uses GFP_KERNEL for its allocations, whereas it should follow the gfp from its callers. Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Reviewed-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@vger.kernel.org> [3.18+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
Since commit 077fcf11 ("mm/thp: allocate transparent hugepages on local node"), we handle THP allocations on page fault in a special way - for non-interleave memory policies, the allocation is only attempted on the node local to the current CPU, if the policy's nodemask allows the node. This is motivated by the assumption that THP benefits cannot offset the cost of remote accesses, so it's better to fallback to base pages on the local node (which might still be available, while huge pages are not due to fragmentation) than to allocate huge pages on a remote node. The nodemask check prevents us from violating e.g. MPOL_BIND policies where the local node is not among the allowed nodes. However, the current implementation can still give surprising results for the MPOL_PREFERRED policy when the preferred node is different than the current CPU's local node. In such case we should honor the preferred node and not use the local node, which is what this patch does. If hugepage allocation on the preferred node fails, we fall back to base pages and don't try other nodes, with the same motivation as is done for the local node hugepage allocations. The patch also moves the MPOL_INTERLEAVE check around to simplify the hugepage specific test. The difference can be demonstrated using in-tree transhuge-stress test on the following 2-node machine where half memory on one node was occupied to show the difference. > numactl --hardware available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 24 25 26 27 28 29 30 31 32 33 34 35 node 0 size: 7878 MB node 0 free: 3623 MB node 1 cpus: 12 13 14 15 16 17 18 19 20 21 22 23 36 37 38 39 40 41 42 43 44 45 46 47 node 1 size: 8045 MB node 1 free: 7818 MB node distances: node 0 1 0: 10 21 1: 21 10 Before the patch: > numactl -p0 -C0 ./transhuge-stress transhuge-stress: 2.197 s/loop, 0.276 ms/page, 7249.168 MiB/s 7962 succeed, 0 failed, 1786 different pages > numactl -p0 -C12 ./transhuge-stress transhuge-stress: 2.962 s/loop, 0.372 ms/page, 5376.172 MiB/s 7962 succeed, 0 failed, 3873 different pages Number of successful THP allocations corresponds to free memory on node 0 in the first case and node 1 in the second case, i.e. -p parameter is ignored and cpu binding "wins". After the patch: > numactl -p0 -C0 ./transhuge-stress transhuge-stress: 2.183 s/loop, 0.274 ms/page, 7295.516 MiB/s 7962 succeed, 0 failed, 1760 different pages > numactl -p0 -C12 ./transhuge-stress transhuge-stress: 2.878 s/loop, 0.361 ms/page, 5533.638 MiB/s 7962 succeed, 0 failed, 1750 different pages > numactl -p1 -C0 ./transhuge-stress transhuge-stress: 4.628 s/loop, 0.581 ms/page, 3440.893 MiB/s 7962 succeed, 0 failed, 3918 different pages The -p parameter is respected regardless of cpu binding. > numactl -C0 ./transhuge-stress transhuge-stress: 2.202 s/loop, 0.277 ms/page, 7230.003 MiB/s 7962 succeed, 0 failed, 1750 different pages > numactl -C12 ./transhuge-stress transhuge-stress: 3.020 s/loop, 0.379 ms/page, 5273.324 MiB/s 7962 succeed, 0 failed, 3916 different pages Without -p parameter, hugepage restriction to CPU-local node works as before. Fixes: 077fcf11 ("mm/thp: allocate transparent hugepages on local node") Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Josef Bacik 提交于
One of the rocksdb people noticed that when you do something like this fallocate(fd, FALLOC_FL_KEEP_SIZE, 0, 10M) pwrite(fd, buf, 5M, 0) ftruncate(5M) on tmpfs, the file would still take up 10M: which led to super fun issues because we were getting ENOSPC before we thought we should be getting ENOSPC. This patch fixes the problem, and mirrors what all the other fs'es do (and was agreed to be the correct behaviour at LSF). I tested it locally to make sure it worked properly with the following xfs_io -f -c "falloc -k 0 10M" -c "pwrite 0 5M" -c "truncate 5M" file Without the patch we have "Blocks: 20480", with the patch we have the correct value of "Blocks: 10240". Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhu Guihua 提交于
When hot add two nodes continuously, we found the vmemmap region info is a bit messed. The last region of node 2 is printed when node 3 hot added, like the following: Initmem setup node 2 [mem 0x0000000000000000-0xffffffffffffffff] On node 2 totalpages: 0 Built 2 zonelists in Node order, mobility grouping on. Total pages: 16090539 Policy zone: Normal init_memory_mapping: [mem 0x40000000000-0x407ffffffff] [mem 0x40000000000-0x407ffffffff] page 1G [ffffea1000000000-ffffea10001fffff] PMD -> [ffff8a077d800000-ffff8a077d9fffff] on node 2 [ffffea1000200000-ffffea10003fffff] PMD -> [ffff8a077de00000-ffff8a077dffffff] on node 2 ... [ffffea101f600000-ffffea101f9fffff] PMD -> [ffff8a074ac00000-ffff8a074affffff] on node 2 [ffffea101fa00000-ffffea101fdfffff] PMD -> [ffff8a074a800000-ffff8a074abfffff] on node 2 Initmem setup node 3 [mem 0x0000000000000000-0xffffffffffffffff] On node 3 totalpages: 0 Built 3 zonelists in Node order, mobility grouping on. Total pages: 16090539 Policy zone: Normal init_memory_mapping: [mem 0x60000000000-0x607ffffffff] [mem 0x60000000000-0x607ffffffff] page 1G [ffffea101fe00000-ffffea101fffffff] PMD -> [ffff8a074a400000-ffff8a074a5fffff] on node 2 <=== node 2 ??? [ffffea1800000000-ffffea18001fffff] PMD -> [ffff8a074a600000-ffff8a074a7fffff] on node 3 [ffffea1800200000-ffffea18005fffff] PMD -> [ffff8a074a000000-ffff8a074a3fffff] on node 3 [ffffea1800600000-ffffea18009fffff] PMD -> [ffff8a0749c00000-ffff8a0749ffffff] on node 3 ... The cause is the last region was missed at the and of hot add memory, and p_start, p_end, node_start were not reset, so when hot add memory to a new node, it will consider they are not contiguous blocks and print the previous one. So we print the last vmemmap region at the end of hot add memory to avoid the confusion. Signed-off-by: NZhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Piotr Kwapulinski 提交于
The simple check for zero length memory mapping may be performed earlier. So that in case of zero length memory mapping some unnecessary code is not executed at all. It does not make the code less readable and saves some CPU cycles. Signed-off-by: NPiotr Kwapulinski <kwapulinski.piotr@gmail.com> Acked-by: NMichal Hocko <mhocko@suse.cz> Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
The kmemleak memory scanning uses finer grained object->lock spinlocks primarily to avoid races with the memory block freeing. However, the pointer lookup in the rb tree requires the kmemleak_lock to be held. This is currently done in the find_and_get_object() function for each pointer-like location read during scanning. While this allows a low latency on kmemleak_*() callbacks on other CPUs, the memory scanning is slower. This patch moves the kmemleak_lock outside the scan_block() loop, acquiring/releasing it only once per scanned memory block. The allow_resched logic is moved outside scan_block() and a new scan_large_block() function is implemented which splits large blocks in MAX_SCAN_SIZE chunks with cond_resched() calls in-between. A redundant (object->flags & OBJECT_NO_SCAN) check is also removed from scan_object(). With this patch, the kmemleak scanning performance is significantly improved: at least 50% with lock debugging disabled and over an order of magnitude with lock proving enabled (on an arm64 system). Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
While very unlikely (usually kmemleak or sl*b bug), the create_object() function in mm/kmemleak.c may fail to insert a newly allocated object into the rb tree. When this happens, kmemleak disables itself and prints additional information about the object already found in the rb tree. Such printing is done with the parent->lock acquired, however the kmemleak_lock is already held. This is a potential race with the scanning thread which acquires object->lock and kmemleak_lock in a This patch removes the locking around the 'parent' object information printing. Such object cannot be freed or removed from object_tree_root and object_list since kmemleak_lock is already held. There is a very small risk that some of the object data is being modified on another CPU but the only downside is inconsistent information printing. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
The kmemleak_do_cleanup() work thread already waits for the kmemleak_scan thread to finish via kthread_stop(). Waiting in kthread_stop() while scan_mutex is held may lead to deadlock if kmemleak_scan_thread() also waits to acquire for scan_mutex. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
Calling delete_object_*() on the same pointer is not a standard use case (unless there is a bug in the code calling kmemleak_free()). However, during kmemleak disabling (error or user triggered via /sys), there is a potential race between kmemleak_free() calls on a CPU and __kmemleak_do_cleanup() on a different CPU. The current delete_object_*() implementation first performs a look-up holding kmemleak_lock, increments the object->use_count and then re-acquires kmemleak_lock to remove the object from object_tree_root and object_list. This patch simplifies the delete_object_*() mechanism to both look up and remove an object from the object_tree_root and object_list atomically (guarded by kmemleak_lock). This allows safe concurrent calls to delete_object_*() on the same pointer without additional locking for synchronising the kmemleak_free_enabled flag. A side effect is a slight improvement in the delete_object_*() performance by avoiding acquiring kmemleak_lock twice and incrementing/decrementing object->use_count. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
The kmemleak scanning thread can run for minutes. Callbacks like kmemleak_free() are allowed during this time, the race being taken care of by the object->lock spinlock. Such lock also prevents a memory block from being freed or unmapped while it is being scanned by blocking the kmemleak_free() -> ... -> __delete_object() function until the lock is released in scan_object(). When a kmemleak error occurs (e.g. it fails to allocate its metadata), kmemleak_enabled is set and __delete_object() is no longer called on freed objects. If kmemleak_scan is running at the same time, kmemleak_free() no longer waits for the object scanning to complete, allowing the corresponding memory block to be freed or unmapped (in the case of vfree()). This leads to kmemleak_scan potentially triggering a page fault. This patch separates the kmemleak_free() enabling/disabling from the overall kmemleak_enabled nob so that we can defer the disabling of the object freeing tracking until the scanning thread completed. The kmemleak_free_part() is deliberately ignored by this patch since this is only called during boot before the scanning thread started. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NVignesh Radhakrishnan <vigneshr@codeaurora.org> Tested-by: NVignesh Radhakrishnan <vigneshr@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
memcg->under_oom tracks whether the memcg is under OOM conditions and is an atomic_t counter managed with mem_cgroup_[un]mark_under_oom(). While atomic_t appears to be simple synchronization-wise, when used as a synchronization construct like here, it's trickier and more error-prone due to weak memory ordering rules, especially around atomic_read(), and false sense of security. For example, both non-trivial read sites of memcg->under_oom are a bit problematic although not being actually broken. * mem_cgroup_oom_register_event() It isn't explicit what guarantees the memory ordering between event addition and memcg->under_oom check. This isn't broken only because memcg_oom_lock is used for both event list and memcg->oom_lock. * memcg_oom_recover() The lockless test doesn't have any explanation why this would be safe. mem_cgroup_[un]mark_under_oom() are very cold paths and there's no point in avoiding locking memcg_oom_lock there. This patch converts memcg->under_oom from atomic_t to int, puts their modifications under memcg_oom_lock and documents why the lockless test in memcg_oom_recover() is safe. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NMichal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Since commit 49426420 ("mm: memcg: handle non-error OOM situations more gracefully"), nobody uses mem_cgroup->oom_wakeups. Remove it. While at it, also fold memcg_wakeup_oom() into memcg_oom_recover() which is its only user. This cleanup was suggested by Michal. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NMichal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Streetman 提交于
Change frontswap single pointer to a singly linked list of frontswap implementations. Update Xen tmem implementation as register no longer returns anything. Frontswap only keeps track of a single implementation; any implementation that registers second (or later) will replace the previously registered implementation, and gets a pointer to the previous implementation that the new implementation is expected to pass all frontswap functions to if it can't handle the function itself. However that method doesn't really make much sense, as passing that work on to every implementation adds unnecessary work to implementations; instead, frontswap should simply keep a list of all registered implementations and try each implementation for any function. Most importantly, neither of the two currently existing frontswap implementations in the kernel actually do anything with any previous frontswap implementation that they replace when registering. This allows frontswap to successfully manage multiple implementations by keeping a list of them all. Signed-off-by: NDan Streetman <ddstreet@ieee.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tony Luck 提交于
UEFI GetMemoryMap() uses a new attribute bit to mark mirrored memory address ranges. See UEFI 2.5 spec pages 157-158: http://www.uefi.org/sites/default/files/resources/UEFI%202_5.pdf On EFI enabled systems scan the memory map and tell memblock about any mirrored ranges. Signed-off-by: NTony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tony Luck 提交于
Try to allocate all boot time kernel data structures from mirrored memory. If we run out of mirrored memory print warnings, but fall back to using non-mirrored memory to make sure that we still boot. By number of bytes, most of what we allocate at boot time is the page structures. 64 bytes per 4K page on x86_64 ... or about 1.5% of total system memory. For workloads where the bulk of memory is allocated to applications this may represent a useful improvement to system availability since 1.5% of total memory might be a third of the memory allocated to the kernel. Signed-off-by: NTony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tony Luck 提交于
Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: NTony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
page_cache_read, do_generic_file_read, __generic_file_splice_read and __ntfs_grab_cache_pages currently ignore mapping_gfp_mask when calling add_to_page_cache_lru which might cause recursion into fs down in the direct reclaim path if the mapping really relies on GFP_NOFS semantic. This doesn't seem to be the case now because page_cache_read (page fault path) doesn't seem to suffer from the reclaim recursion issues and do_generic_file_read and __generic_file_splice_read also shouldn't be called under fs locks which would deadlock in the reclaim path. Anyway it is better to obey mapping gfp mask and prevent from later breakage. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NMichal Hocko <mhocko@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Shailendra Verma 提交于
Signed-off-by: NShailendra Verma <shailendra.capricorn@gmail.com> Acked-by: NMichal Nazarewicz <mina86@mina86.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wang Long 提交于
In oom_kill_process(), the variable 'points' is unsigned int. Print it as such. Signed-off-by: NWang Long <long.wanglong@huawei.com> Acked-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Kravetz 提交于
alloc_huge_page and hugetlb_reserve_pages use region_chg to calculate the number of pages which will be added to the reserve map. Subpool and global reserve counts are adjusted based on the output of region_chg. Before the pages are actually added to the reserve map, these routines could race and add fewer pages than expected. If this happens, the subpool and global reserve counts are not correct. Compare the number of pages actually added (region_add) to those expected to added (region_chg). If fewer pages are actually added, this indicates a race and adjust counters accordingly. Signed-off-by: NMike Kravetz <mike.kravetz@oracle.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: NDavidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Kravetz 提交于
Modify region_add() to keep track of regions(pages) added to the reserve map and return this value. The return value can be compared to the return value of region_chg() to determine if the map was modified between calls. Make vma_commit_reservation() also pass along the return value of region_add(). In the normal case, we want vma_commit_reservation to return the same value as the preceding call to vma_needs_reservation. Create a common __vma_reservation_common routine to help keep the special case return values in sync Signed-off-by: NMike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Kravetz 提交于
While working on hugetlbfs fallocate support, I noticed the following race in the existing code. It is unlikely that this race is hit very often in the current code. However, if more functionality to add and remove pages to hugetlbfs mappings (such as fallocate) is added the likelihood of hitting this race will increase. alloc_huge_page and hugetlb_reserve_pages use information from the reserve map to determine if there are enough available huge pages to complete the operation, as well as adjust global reserve and subpool usage counts. The order of operations is as follows: - call region_chg() to determine the expected change based on reserve map - determine if enough resources are available for this operation - adjust global counts based on the expected change - call region_add() to update the reserve map The issue is that reserve map could change between the call to region_chg and region_add. In this case, the counters which were adjusted based on the output of region_chg will not be correct. In order to hit this race today, there must be an existing shared hugetlb mmap created with the MAP_NORESERVE flag. A page fault to allocate a huge page via this mapping must occur at the same another task is mapping the same region without the MAP_NORESERVE flag. The patch set does not prevent the race from happening. Rather, it adds simple functionality to detect when the race has occurred. If a race is detected, then the incorrect counts are adjusted. Review comments pointed out the need for documentation of the existing region/reserve map routines. This patch set also adds documentation in this area. This patch (of 3): This is a documentation only patch and does not modify any code. Descriptions of the routines used for reserve map/region tracking are added. Signed-off-by: NMike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
There is a very subtle difference between mmap()+mlock() vs mmap(MAP_LOCKED) semantic. The former one fails if the population of the area fails while the later one doesn't. This basically means that mmap(MAPLOCKED) areas might see major fault after mmap syscall returns which is not the case for mlock. mmap man page has already been altered but Documentation/vm/unevictable-lru.txt deserves a clarification as well. Signed-off-by: NMichal Hocko <mhocko@suse.cz> Reported-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Leon Romanovsky 提交于
kenter/kleave/kdebug are wrapper macros to print functions flow and debug information. This set was written before pr_devel() was introduced, so it was controlled by "#if 0" construction. It is questionable if anyone is using them [1] now. This patch removes these macros, converts numerous printk(KERN_WARNING, ...) to use general pr_warn(...) and removes debug print line from validate_mmap_request() function. Signed-off-by: NLeon Romanovsky <leon@leon.nu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
We have confusing functions to clear pmd, pmd_clear_* and pmd_clear. Add _huge_ to pmdp_clear functions so that we are clear that they operate on hugepage pte. We don't bother about other functions like pmdp_set_wrprotect, pmdp_clear_flush_young, because they operate on PTE bits and hence indicate they are operating on hugepage ptes Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
Also move the pmd_trans_huge check to generic code. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
Architectures like ppc64 [1] need to do special things while clearing pmd before a collapse. For them this operation is largely different from a normal hugepage pte clear. Hence add a separate function to clear pmd before collapse. After this patch pmdp_* functions operate only on hugepage pte, and not on regular pmd_t values pointing to page table. [1] ppc64 needs to invalidate all the normal page pte mappings we already have inserted in the hardware hash page table. But before doing that we need to make sure there are no parallel hash page table insert going on. So we need to do a kick_all_cpus_sync() before flushing the older hash table entries. By moving this to a separate function we capture these details and mention how it is different from a hugepage pte clear. This patch is a cleanup and only does code movement for clarity. There should not be any change in functionality. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xie XiuQi 提交于
RAS user space tools like rasdaemon which base on trace event, could receive mce error event, but no memory recovery result event. So, I want to add this event to make this scenario complete. This patch add a event at ras group for memory-failure. The output like below: # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:24 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | mce-inject-13150 [001] .... 277.019359: memory_failure_event: pfn 0x19869: recovery action for free buddy page: Delayed [xiexiuqi@huawei.com: fix build error] Signed-off-by: NXie XiuQi <xiexiuqi@huawei.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Jim Davis <jim.epost@gmail.com> Signed-off-by: NXie XiuQi <xiexiuqi@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xie XiuQi 提交于
Change type of action_result's param 3 to enum for type consistency, and rename mf_outcome to mf_result for clearly. Signed-off-by: NXie XiuQi <xiexiuqi@huawei.com> Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Jim Davis <jim.epost@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xie XiuQi 提交于
Export 'outcome' and 'action_page_type' to mm.h, so we could use this emnus outside. This patch is preparation for adding trace events for memory-failure recovery action. Signed-off-by: NXie XiuQi <xiexiuqi@huawei.com> Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Jim Davis <jim.epost@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-