drivers/video/fbmem.c:1567: warning: 'video_setup' defined but not used
Acked-by: N"Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for Geforce4 MX 4000 (0x185)
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The BUS_I2C option is neither available (since there is no VISWS option in
the kernel) nor does it have any effect - so why not remove it?

Based on a report by Jean-Luc Leger <reiga@dspnet.fr.eu.org>.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- tipar_open(): fix unsigned comparison

- tipar_open(): don't permit NULL pardevice (probably unneeded given the
  above fix).

- tipar_init_module(): handle the situation where parport_register_driver()
  failed to register any devices (parport_register_driver() drops the ->attach
  return value on the floor).

  This probably makes fixes #1 and #2 unneeded.

- tipar_init_module(): fix various error-path resource leaks.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Right now in __constant_test_bit for the s390 there is an extra set of ()
surrounding the calculation.  This patch simply removes one set of () that is
surrounding the whole clause.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on a patch from Maximilian Attems <maks@sternwelten.at> .  Nothing in
asm-s390/setup.h is of interest for user space.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for unshare system call.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add missing smp_cpu_not_running define to avoid build warnings in the non smp
case.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update URL for s390 and add maintainers for s390 networking and zfcp driver.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initiliazing of cpu_possible_map was done in smp_prepare_cpus which is way too
late.  Therefore assign a static value to cpu_possible_map, since we don't
have access to max_cpus in setup_arch.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When the sclp interface takes very long to serve a request, the sclp core
driver will report a failed request to the sclp tty driver even though the
request is still being processed by the sclp interface.  Eventually the sclp
interface completes the request and updates some fields in the request buffer
which leads to a corrupted tty pages list.  The next time function
sclp_tty_write_room is called, the corrupted list will be traversed, resulting
in an oops.

To avoid this remove the busy retry limit and increase retry intervals.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Switch on CONFIG_DEBUG_FS again.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix locking in __chp_add() and s390_subchannel_remove_chpid(): Need to
disable/enable because they are always called from a thread (and not
directly from a machine check...)
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Lost a few hours debugging an early-bootup fault within printk itself,
which manifested itself as a hard to debug early hang.

This patch makes it much easier by printing out early faults via
early_printk(), which function is a lot simpler than a full printk, and
hence more likely to succeed in emergencies.  (We do not recover from early
faults anyway, so there's no loss from not having these messages in the
normal printk buffer.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This puts the variables and the way to get to reclaim_mapped in one block.
And allows zone_reclaim or other things to skip the determination (maybe
this whole block of code does not belong into refill_inactive_zone()?)
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

shrink_zone() already increments reclaim_in_progress.  No need to do it in
balance_pgdat.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

shrink_list() and refill_inactive() check all ptes pointing to a page for
reference bits in order to decide if the page should be put on the active
list.  This is not necessary for zone_reclaim since we are only interested
in removing unmapped pages.  Skip the checks in both functions.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With David Woodhouse <dwmw2@infradead.org>

select() presently has a habit of increasing the value of the user's
`timeout' argument on return.

We were writing back a timeout larger than the original.  We _deliberately_
round up, since we know we must wait at _least_ as long as the caller asks
us to.

The patch adds a couple of helper functions for magnitude comparison of
timespecs and of timevals, and uses them to prevent the various poll and
select functions from returning a timeout which is larger than the one which
was passed in.

The patch also fixes a bug in compat_sys_pselect7(): it was adding the new
timeout value to the old one and was returning that.  It should just return
the new timeout value.

(We have various handy timespec/timeval-to-from-nsec conversion functions in
time.h.  But this code open-codes it all).

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <ak@muc.de>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: george anzinger <george@mvista.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[description from AK]

The IBM Summit 3 chipset doesn't implement the HPET timer replacement
option.  Since the current Linux code relies on it use a mixed mode with
both PIT for the interrupt and HPET counters for the time keeping.  That
was already implemented, but didn't work properly because it was still
using the last interrupt offset in HPET.  This resulted in x460 not
booting.  Fix this up by using the free running HPET counter.

Shouldn't affect any other machine because they either use full HPET mode
or no HPET at all.

TBD needs a similar 32bit fix.
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: Bob Picco <bob.picco@hp.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NMatt Waddel <Matt.Waddel@freescale.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The *at patches introduced fstatat and, due to inusfficient research, I
used the newfstat functions generally as the guideline.  The result is that
on 32-bit platforms we don't have all the information needed to implement
fstatat64.

This patch modifies the code to pass up 64-bit information if
__ARCH_WANT_STAT64 is defined.  I renamed the syscall entry point to make
this clear.  Other archs will continue to use the existing code.  On x86-64
the compat code is implemented using a new sys32_ function.  this is what
is done for the other stat syscalls as well.

This patch might break some other archs (those which define
__ARCH_WANT_STAT64 and which already wired up the syscall).  Yet others
might need changes to accomodate the compatibility mode.  I really don't
want to do that work because all this stat handling is a mess (more so in
glibc, but the kernel is also affected).  It should be done by the arch
maintainers.  I'll provide some stand-alone test shortly.  Those who are
eager could compile glibc and run 'make check' (no installation needed).

The patch below has been tested on x86 and x86-64.
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Ben Dooks

Define the bits for the two board control latches
that control various items on the H1940 iPAQ.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Serial drivers in general should not write uart_info->flags - they're
private to serial_core.  Serial drivers have no need to fiddle with
tty->alt_speed, nor manipulate TTY_IO_ERROR in tty->flags.  Fix the
ioc4 serial driver for both these points by simply removing the
offending code.

Acked-by: pfg@sgi.com
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/s390/kernel/compat_signal.c:199: error: conflicting types for 'do_sigaction'
include/linux/sched.h:1115: error: previous declaration of 'do_sigaction' was here
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds some additional comments in order to help others figure out how
exactly the code works.  And fix a variable name.

Also swap_page does need to ignore all reference bits when unmapping a
page.  Otherwise we may have to repeatedly unmap a frequently touched page.
So change the try_to_unmap parameter to 1.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Prevent stalled processing of received data when a driver allocates tty
buffer space but does not immediately follow the allocation with more data
and a call to schedule receive tty processing.  (example: hvc_console) This
bug was introduced by the first locking patch for the new tty buffering.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Prevents deadlock situation between
kmem_cache_create()/kmem_cache_destory(), and kmem_cache_create() /cpu
hotplug.  The locking order probably got moved over time.
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sys_shmdt() can manage shm segments which are covered by multiple vmas.  (This
can happen when a user uses mprotect() after shmat().)

This works well if shm is aligned to PAGE_SIZE, but if not, the last
segment cannot be detached.  It is because a comparison in sys_shmdt()

	(vma->vm_end - addr) < size
		addr == return address of shmat()
		size == shmsize, argments to shmget()

size should be aligned to PAGE_SIZE before being compared with vma->vm_end,
which is aligned.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: NHugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When panic_timeout is zero, suppress triggering a nested panic due to soft
lockup detection.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initialising cpu_possible_map to all-ones with CONFIG_HOTPLUG_CPU means that

a) All for_each_cpu() loops will iterate across all NR_CPUS CPUs, rather
   than over possible ones.  That can be quite expensive.

b) Soon we'll be allocating per-cpu areas only for possible CPUs.  So with
   CPU_MASK_ALL, we'll be wasting memory.

I also switched voyager over to not use CPU_MASK_ALL in the non-CPU-hotplug
case.  Should be OK..

I note that parisc is also using CPU_MASK_ALL.  Suggest that it stop doing
that.

Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Paul Jackson <pj@sgi.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Zwane Mwaikambo <zwane@linuxpower.ca>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We are setting up sources for building external modules like this:

  /usr/src/linux-obj> # create a .config file
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD oldconfig
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD prepare
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD scripts
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD clean

After that, external modules can be built with:

  /usr/src/module> make -C /usr/src/linux-obj M=$PWD

This fails for ppc32 because the `make clean' removes the
arch/powerpc/include directory.  This should be done in archmrproper
instead of in archclean.
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove bogus comment from init function which could lead to the assumption
that cpu_possible_map is setup in smp_prepare_cpus().
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is possible that the reserved crashkernel region can be overlapped with
initrd since the bootloader sets the initrd location.  When the initrd
region is freed, the second kernel memory will not be contiguous.  The
Kexec_load can cause an oops since there is no contiguous memory to write
the second kernel or this memory could be used in the first kernel itself
and may not be part of the dump.  For example, on powerpc, the initrd is
located at 36MB and the crashkernel starts at 32MB.  The kexec_load caused
panic since writing into non-allocated memory (after 36MB).  We could see
the similar issue even on other archs.

One possibility is to move the initrd outside of crashkernel region.  But,
the initrd region will be freed anyway before the system is up.  This patch
fixes this issue and frees only regions that are not part of crashkernel
memory in case overlaps.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Firmware should go into /lib/firmware, not /etc/firmware.

Found by Alejandro Bonilla.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I don't think the code is quite ready, which is why I asked for Peter's
additions to also be merged before I acked it (although it turned out that
it still isn't quite ready with his additions either).

Basically I have had similar observations to Suresh in that it does not
play nicely with the rest of the balancing infrastructure (and raised
similar concerns in my review).

The samples (group of 4) I got for "maximum recorded imbalance" on a 2x2
SMP+HT Xeon are as follows:

            | Following boot | hackbench 20        | hackbench 40
 -----------+----------------+---------------------+---------------------
 2.6.16-rc2 | 30,37,100,112  | 5600,5530,6020,6090 | 6390,7090,8760,8470
 +nosmpnice |  3, 2,  4,  2  |   28, 150, 294, 132 |  348, 348, 294, 347

Hackbench raw performance is down around 15% with smpnice (but that in
itself isn't a huge deal because it is just a benchmark).  However, the
samples show that the imbalance passed into move_tasks is increased by
about a factor of 10-30.  I think this would also go some way to explaining
latency blips turning up in the balancing code (though I haven't actually
measured that).

We'll probably have to revert this in the SUSE kernel.

Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Peter Williams <pwil3058@bigpond.net.au>
Cc: "Martin J. Bligh" <mbligh@aracnet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Embedded boards that u-boot require a kernel image in the uImage format.
This allows a given board to specify it wants a uImage built by default.

This also fixes a warning at config time, as this symbol is referred
to in arch/powerpc/platforms/83xx/Kconfig.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>