Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 21 12月, 2018 5 次提交
    • A
      perf trace: Do not hardcode the size of the tracepoint common_ fields · b9b6a2ea
      由 Arnaldo Carvalho de Melo 提交于 
      We shouldn't hardcode the size of the tracepoint common_ fields, use the
offset of the 'id'/'__syscallnr' field in the sys_enter event instead.

This caused the augmented syscalls code to fail on a particular build of a
PREEMPT_RT_FULL kernel where these extra 'common_migrate_disable' and
'common_padding' fields were before the syscall id one:

  # cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/format
  name: sys_enter
  ID: 22
  format:
	field:unsigned short common_type;	offset:0;	size:2;	signed:0;
	field:unsigned char common_flags;	offset:2;	size:1;	signed:0;
	field:unsigned char common_preempt_count;	offset:3;	size:1;	signed:0;
	field:int common_pid;	offset:4;	size:4;	signed:1;
	field:unsigned short common_migrate_disable;	offset:8;	size:2;	signed:0;
	field:unsigned short common_padding;	offset:10;	size:2;	signed:0;

	field:long id;	offset:16;	size:8;	signed:1;
	field:unsigned long args[6];	offset:24;	size:48;	signed:0;

  print fmt: "NR %ld (%lx, %lx, %lx, %lx, %lx, %lx)", REC->id, REC->args[0], REC->args[1], REC->args[2], REC->args[3], REC->args[4], REC->args[5]
  #

All those 'common_' prefixed fields are zeroed when they hit a BPF tracepoint
hook, we better just discard those, i.e. somehow pass an offset to the
BPF program from the start of the ctx and make adjustments in the 'perf trace'
handlers to adjust the offset of the syscall arg offsets obtained from tracefs.

Till then, fix it the quick way and add this to the augmented_raw_syscalls.c to
bet it to work in such kernels:

  diff --git a/tools/perf/examples/bpf/augmented_raw_syscalls.c b/tools/perf/examples/bpf/augmented_raw_syscalls.c
  index 53c233370fae..1f746f931e13 100644
  --- a/tools/perf/examples/bpf/augmented_raw_syscalls.c
  +++ b/tools/perf/examples/bpf/augmented_raw_syscalls.c
  @@ -38,12 +38,14 @@ struct bpf_map SEC("maps") syscalls = {

   struct syscall_enter_args {
          unsigned long long common_tp_fields;
  +       long               rt_common_tp_fields;
          long               syscall_nr;
          unsigned long      args[6];
   };

   struct syscall_exit_args {
          unsigned long long common_tp_fields;
  +       long               rt_common_tp_fields;
          long               syscall_nr;
          long               ret;
   };

Just to check that this was the case. Fix it properly later, for now remove the
hardcoding of the offset in the 'perf trace' side and document the situation
with this patch.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2pqavrktqkliu5b9nzouio21@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b9b6a2ea
    • S
      perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz · 14541b1e
      由 Stanislav Fomichev 提交于 
      Current libbfd feature test unconditionally links against -liberty and -lz.
While it's required on some systems (e.g. opensuse), it's completely
unnecessary on the others, where only -lbdf is sufficient (debian).
This patch streamlines (and renames) the following feature checks:

feature-libbfd           - only link against -lbfd (debian),
                           see commit 2cf90407 ("perf tools: Fix bfd
			   dependency libraries detection")
feature-libbfd-liberty   - link against -lbfd and -liberty
feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse),
                           see commit 280e7c48 ("perf tools: fix BFD
			   detection on opensuse")

(feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z}
for clarity)

The main motivation is to fix this feature test for bpftool which is
currently broken on debian (libbfd feature shows OFF, but we still
unconditionally link against -lbfd and it works).

Tested on debian with only -lbfd installed (without -liberty); I'd
appreciate if somebody on the other systems can test this new detection
method.
Signed-off-by: NStanislav Fomichev <sdf@google.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      14541b1e
    • A
      perf beauty mmap: PROT_WRITE should come before PROT_EXEC · 5ce29d52
      由 Arnaldo Carvalho de Melo 提交于 
      To match strace output:

  # cat mmap.c
  #include <sys/mman.h>

  int main(void)
  {
	  mmap(0, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
	  return 0;
  }
  # strace -e mmap ./mmap |& grep -v ^+++
  mmap(NULL, 103484, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f5bae400000
  mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5bae3fe000
  mmap(NULL, 3889792, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f5bade40000
  mmap(0x7f5bae1ec000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ac000) = 0x7f5bae1ec000
  mmap(0x7f5bae1f2000, 14976, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f5bae1f2000
  mmap(NULL, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5bae419000
  # trace -e mmap ./mmap |& grep -v ^+++
  mmap(NULL, 103484, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f6646c25000
  mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f6646c23000
  mmap(NULL, 3889792, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f6646665000
  mmap(0x7f6646a11000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ac000) = 0x7f6646a11000
  mmap(0x7f6646a17000, 14976, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f6646a17000
  mmap(NULL, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f6646c3e000
  #
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-nt49d6iqle80cw8f529ovaqi@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      5ce29d52
    • A
      perf trace: Check if the raw_syscalls:sys_{enter,exit} are setup before setting tp filter · f76214f9
      由 Arnaldo Carvalho de Melo 提交于 
      While updating 'perf trace' on an machine with an old precompiled
augmented_raw_syscalls.o that didn't setup the syscall map the new 'perf
trace' codebase notices the augmented_raw_syscalls.o eBPF event, decides
to use it instead of the old raw_syscalls:sys_{enter,exit} method, but
then because we don't have the syscall map tries to set the tracepoint
filter on the sys_{enter,exit} evsels, that are NULL, segfaulting.

Make the code more robust by checking it those tracepoints have
their respective evsels in place before trying to set the tp filter.

With this we still get everything to work, just not setting up the
syscall filters, which is better than a segfault. Now to update the
precompiled augmented_raw_syscalls.o and continue development :-)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3ft5rjdl05wgz2pwpx2z8btu@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f76214f9
    • I
      Merge tag 'perf-core-for-mingo-4.21-20181218' of... · 883f4def
      由 Ingo Molnar 提交于 
      Merge tag 'perf-core-for-mingo-4.21-20181218' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

- Implement BPF based syscall filtering in 'perf trace', using BPF maps and
  the augmented_raw_syscalls.c BPF proggie (Arnaldo Carvalho de Melo)

- Allow specifying in .perfconfig a set of events use in 'perf trace' in
  addition to any other specified from the command line. This initially
  will be used to always use the augmented_raw_syscalls.o precompiled
  BPF program for getting pointer contents. (Arnaldo Carvalho de Melo)

- Allow fine grained control about how the syscall output should be
  formatted. This will be used to allow producing the same output produced
  by the 'strace' tool, to then use in regression tests comparing the
  output of 'perf trace' with the one produced from 'strace' (Arnaldo Carvalho de Melo)

- Beautify the renameat2 olddirfd, newdirfd and flags arguments (Arnaldo Carvalho de Melo)

- Beautify arch_prctl 'code' syscall arg (Arnaldo Carvalho de Melo)

- Beautify fadvise64 'advice' syscall arg (Arnaldo Carvalho de Melo)

- Relax checks on perf-PID.map ownership, resulting in symbols in
  executable anonymous maps setup by JITs in things like node.js to
  be resolved in a 'perf top' session run by root without the need
  for --force to be used (Arnaldo Carvalho de Melo)

- Update asm-generic/unistd.h copy (Arnaldo Carvalho de Melo)

- Do not use the first and last symbols when setting up address filters in
  auxtrace, this fails when we don't have a symbol table, filter the entire
  area based on the dso size. (Adrian Hunter)

- Do not use kernel headers to build libsubcmd, we shouldn't use
  anything from outside tools/, fixes the build with the Android NDK (Arnaldo Carvalho de Melo)

- Add several prototypes for systems lacking those, such as open_memstream(),
  sigqueue(), fixing warnings building with Android's bionic libc that were
  preventing the use of -Werror there (Arnaldo Carvalho de Melo)

- Use LDFLAGS in the libtraceevent build commands, allowing developers
  to override its values (Jiri Olsa)

- Link libperf-jvmti.so with LDFLAGS variable, allowing distro
  packages to propagate its settings when building this library (Jiri Olsa)

- cs-etm (ARM CoreSight) fixes: (Leo Yan)

  - Correct packets swapping in cs_etm__flush()
  - Avoid stale branch samples when flush packet
  - Remove unused 'trace_on' in cs_etm_decoder
  - Refactor enumeration cs_etm_sample_type
  - Rename CS_ETM_TRACE_ON to CS_ETM_DISCONTINUITY
  - Treat NO_SYNC element as trace discontinuity
  - Treat EO_TRACE element as trace discontinuity
  - Generate branch sample for exception packet

- Use shebangs in the 'perf test' shell scripts, making them identifiable as
  shell scripts (Michael Petlan)

- Avoid segfaults caused by negated options in 'perf stat' (Michael Petlan)

- Fix processing of dereferenced args in bprintk events in libtracevent (Steven Rostedt)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      883f4def
  3. 19 12月, 2018 22 次提交
  5. 18 12月, 2018 13 次提交
    • A
      perf trace: Allow suppressing the syscall argument names · 9d6dc178
      由 Arnaldo Carvalho de Melo 提交于 
      To show just the values:

Default:

  # trace -e open*,close,*sleep sleep 1
  openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC           ) = 3
  close(fd: 3                                                           ) = 0
  openat(dfd: CWD, filename: /lib64/libc.so.6, flags: CLOEXEC           ) = 3
  close(fd: 3                                                           ) = 0
  openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: CLOEXEC) = 3
  close(fd: 3                                                           ) = 0
  nanosleep(rqtp: 0x7ffc0c4ea0d0, rmtp: 0                               ) = 0
  close(fd: 1                                                           ) = 0
  close(fd: 2                                                           ) = 0
  #

Remove it:

  # perf config trace.show_arg_names=no
  # trace -e open*,close,*sleep sleep 1
  openat(CWD, /etc/ld.so.cache, CLOEXEC                                 ) = 3
  close(3                                                               ) = 0
  openat(CWD, /lib64/libc.so.6, CLOEXEC                                 ) = 3
  close(3                                                               ) = 0
  openat(CWD, /usr/lib/locale/locale-archive, CLOEXEC                   ) = 3
  close(3                                                               ) = 0
  nanosleep(0x7ffced3a8c40, 0                                           ) = 0
  close(1                                                               ) = 0
  close(2                                                               ) = 0
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ta9tbdwgodpw719sr2bjm8eb@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9d6dc178
    • A
      perf trace: Allow configuring if the syscall start timestamp should be printed · b036146f
      由 Arnaldo Carvalho de Melo 提交于 
        # trace -e open*,close,*sleep sleep 1
     0.000 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC           ) = 3
     0.016 close(fd: 3                                                           ) = 0
     0.024 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: CLOEXEC           ) = 3
     0.074 close(fd: 3                                                           ) = 0
     0.235 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: CLOEXEC) = 3
     0.251 close(fd: 3                                                           ) = 0
     0.285 nanosleep(rqtp: 0x7ffd68e6d620, rmtp: 0                               ) = 0
  1000.386 close(fd: 1                                                           ) = 0
  1000.395 close(fd: 2                                                           ) = 0
  #

  # perf config trace.show_timestamp=no
  # trace -e open*,close,*sleep sleep 1
  openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC           ) = 3
  close(fd: 3                                                           ) = 0
  openat(dfd: CWD, filename: /lib64/libc.so.6, flags: CLOEXEC           ) = 3
  close(fd: 3                                                           ) = 0
  openat(dfd: CWD, filename: , flags: CLOEXEC                           ) = 3
  close(fd: 3                                                           ) = 0
  nanosleep(rqtp: 0x7fffa79c38e0, rmtp: 0                               ) = 0
  close(fd: 1                                                           ) = 0
  close(fd: 2                                                           ) = 0
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mjjnicy48367jah6ls4k0nk8@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b036146f
    • A
      perf trace: Allow configuring default for perf_event_attr.inherit · d32de87e
      由 Arnaldo Carvalho de Melo 提交于 
      I.f. if children should inherit the parent perf_event configuration,
i.e. if we should trace children as well or just the parent.

The default is to follow children, to disable this and have a behaviour
similar to strace, set this config option or use the --no_inherit 'perf
trace' option.

E.g.:

Default:

  # perf config trace.no_inherit
  # trace -e clone,*sleep time sleep 1
     0.000 time/21107 clone(clone_flags: CHILD_CLEARTID|CHILD_SETTID|0x11, newsp: 0, child_tidptr: 0x7f7b8f9ae810) = 21108 (time)
         ? time/21108  ... [continued]: clone()
     0.691 sleep/21108 nanosleep(rqtp: 0x7ffed01d0540, rmtp: 0                               ) = 0
  0.00user 0.00system 0:01.00elapsed 0%CPU (0avgtext+0avgdata 1988maxresident)k
  0inputs+0outputs (0major+76minor)pagefaults 0swaps
  #

Disable it:

  # trace -e clone,*sleep time sleep 1
     0.000 clone(clone_flags: CHILD_CLEARTID|CHILD_SETTID|0x11, newsp: 0, child_tidptr: 0x7ff41e100810) = 21414 (time)
  0.00user 0.00system 0:01.00elapsed 0%CPU (0avgtext+0avgdata 1964maxresident)k
  0inputs+0outputs (0major+76minor)pagefaults 0swaps
  #

Notice that since there is just one thread, the "comm/TID" column is
suppressed.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-thd8s16pagyza71ufi5vjlan@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d32de87e
    • A
      perf config: Show the configuration when no arguments are provided · 41e0d040
      由 Arnaldo Carvalho de Melo 提交于 
      More convenient thah having to recall what letter is about
showing/listing/dumping the configuration, i.e. no arguments means
-l/--list:

  # perf config
  llvm.dump-obj=true
  trace.default_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
  trace.show_zeros=yes
  trace.show_duration=no
  # perf config -l
  llvm.dump-obj=true
  trace.default_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
  trace.show_zeros=yes
  trace.show_duration=no
  # perf config -h

   Usage: perf config [<file-option>] [options] [section.name[=value] ...]

      -l, --list            show current config variables
          --system          use system config file
          --user            use user config file

  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-z2n63avz6tliqb5gmu4l1dti@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      41e0d040
    • A
      perf trace: Allow configuring if the syscall duration should be printed · 42e4a52d
      由 Arnaldo Carvalho de Melo 提交于 
        # perf config trace.show_duration=no
  # perf config -l | grep trace
  trace.default_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
  trace.show_zeros=true
  trace.show_duration=no
  # trace -e *sleep sleep 1
     0.000 sleep/8729 nanosleep(rqtp: 0x7ffcb0b4c940, rmtp: 0) = 0
  # perf config trace.show_duration=yes
  # trace -e *sleep sleep 1
     0.000 (1000.212 ms): sleep/8735 nanosleep(rqtp: 0x7ffca15fa770, rmtp: 0) = 0
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2c7h1m8fhzb9puxtj9nlevi8@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      42e4a52d
    • A
      perf trace: Allow configuring if zeroed syscall args should be printed · e7c634fc
      由 Arnaldo Carvalho de Melo 提交于 
      The default so far, since we show argument names followed by its values,
was to make the output more compact by suppressing most zeroed args.

Make this configurable so that users can choose what best suit their
needs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-q0gxws02ygodh94o0hzim5xd@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e7c634fc
    • A
      perf trace: Allow specifying a set of events to add in perfconfig · ac96287c
      由 Arnaldo Carvalho de Melo 提交于 
      To add augmented_raw_syscalls to the events speficied by the user, or be
the only one if no events were specified by the user, one can add this
to perfconfig:

  # cat ~/.perfconfig
  [trace]
	  add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
  #

I.e. pre-compile the augmented_raw_syscalls.c BPF program and make it
always load, this way:

  # perf trace -e open* cat /etc/passwd > /dev/null
     0.000 ( 0.013 ms): cat/31557 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC) = 3
     0.035 ( 0.007 ms): cat/31557 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: CLOEXEC) = 3
     0.353 ( 0.009 ms): cat/31557 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: CLOEXEC) = 3
     0.424 ( 0.006 ms): cat/31557 openat(dfd: CWD, filename: /etc/passwd) = 3
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0lgj7vh64hg3ce44gsmvj7ud@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ac96287c
    • A
      perf augmented_raw_syscalls: Do not include stdio.h · 4623ce40
      由 Arnaldo Carvalho de Melo 提交于 
      We're not using that puts() thing, and thus we don't need to define the
__bpf_stdout__ map, reducing the setup time.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3452xgatncpil7v22minkwbo@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4623ce40
    • L
      perf cs-etm: Generate branch sample for exception packet · 7100b12c
      由 Leo Yan 提交于 
      The exception packet appears as one element with 'elem_type' ==
OCSD_GEN_TRC_ELEM_EXCEPTION or OCSD_GEN_TRC_ELEM_EXCEPTION_RET, which is
present for exception entry and exit respectively.  The decoder sets the
packet fields 'packet->exc' and 'packet->exc_ret' to indicate the
exception packets; but exception packets don't have a dedicated sample
type and shares the same sample type CS_ETM_RANGE with normal
instruction packets.

As a result, the exception packets are taken as normal instruction
packets and this introduces confusion in mixing different packet types.
Furthermore, these instruction range packets will be processed for
branch samples only when 'packet->last_instr_taken_branch' is true,
otherwise they will be omitted, this can introduce a mess for exception
and exception returning due to not having the complete address range
info for context switching.

To process exception packets properly, this patch introduces two new
sample types: CS_ETM_EXCEPTION and CS_ETM_EXCEPTION_RET; these two types
of packets will be handled by cs_etm__exception().  The function
cs_etm__exception() forces setting the previous CS_ETM_RANGE packet flag
'prev_packet->last_instr_taken_branch' to true, this matches well with
the program flow when the exception is trapped from user space to kernel
space, no matter if the most recent flow has branch taken or not; this
is also safe for returning to user space after exception handling.

After exception packets have their own sample type, the packet fields
'packet->exc' and 'packet->exc_ret' aren't needed anymore, so remove
them.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-9-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7100b12c
    • L
      perf cs-etm: Treat EO_TRACE element as trace discontinuity · 02e7e250
      由 Leo Yan 提交于 
      If the decoder outputs an EO_TRACE element, it means the end of the
trace buffer; this is a discontinuity and in this case the end of trace
data needs to be saved.

This patch generates a CS_ETM_DISCONTINUITY packet for the EO_TRACE
element hereby flushing the end of trace data in cs-etm.c.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-8-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      02e7e250
    • L
      perf cs-etm: Treat NO_SYNC element as trace discontinuity · 37bb3716
      由 Leo Yan 提交于 
      The CoreSight tracer driver might insert barrier packets between
different buffers, thus the decoder can spot the boundaries based on the
barrier packet; it is possible for the decoder to hit a barrier packet
and emit a NO_SYNC element, then the decoder will find a periodic
synchronisation point inside that next trace block that starts the trace
again but does not have the TRACE_ON element as indicator - usually
because this trace block has wrapped the buffer so we have lost the
original point when the trace was enabled.

In the first case it causes the insertion of a OCSD_GEN_TRC_ELEM_NO_SYNC
in the middle of the tracing stream, but as we were not handling the
NO_SYNC element properly this ends up making users miss the
discontinuity indications.

Though OCSD_GEN_TRC_ELEM_NO_SYNC is different from CS_ETM_TRACE_ON when
output from the decoder, both indicate that the trace data is
discontinuous; this patch treats OCSD_GEN_TRC_ELEM_NO_SYNC as a trace
discontinuity and generates a CS_ETM_DISCONTINUITY packet for it, so
cs-etm can handle the discontinuity for this case, finally it saves the
last trace data for the previous trace block and restart samples for the
new block.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-7-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      37bb3716
    • L
      perf cs-etm: Rename CS_ETM_TRACE_ON to CS_ETM_DISCONTINUITY · 49ccf87b
      由 Leo Yan 提交于 
      TRACE_ON element is used at the beginning of trace, it also can be
appeared in the middle of trace data to indicate discontinuity; for
example, it's possible to see multiple TRACE_ON elements in the trace
stream if the trace is being limited by address range filtering.

Furthermore, except TRACE_ON element is for discontinuity, NO_SYNC and
EO_TRACE also can be used to indicate discontinuity, though they are
used for different scenarios for which the trace is interrupted.

This patch renames sample type CS_ETM_TRACE_ON to CS_ETM_DISCONTINUITY,
firstly the new name describes more closely the purpose of the packet;
secondly this is a preparation for other output elements which also
cause the trace discontinuity thus they can share the same one packet
type.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-6-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      49ccf87b
    • L
      perf cs-etm: Refactor enumeration cs_etm_sample_type · cfc1d427
      由 Leo Yan 提交于 
      The values in enumeration cs_etm_sample_type are defined with setting
bit N for each packet type, this is not suggested in the usual case.

This patch refactor cs_etm_sample_type by converting from bit shifting
values to continuous numbers.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-5-git-send-email-leo.yan@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      cfc1d427