from include/asm-powerpc.  This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly.  Of the latter only
one was outside the arch code and it is a driver only built for powerpc.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Wire up for FRV the system calls that were added in the last merge window.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Wire up system calls added in the last merge window for the MN10300 arch.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After moving the the include files there were a few clean-ups:

1) Some files used #include <asm-ia64/xyz.h>, changed to <asm/xyz.h>

2) Some comments alerted maintainers to look at various header files to
make matching updates if certain code were to be changed. Updated these
comments to use the new include paths.

3) Some header files mentioned their own names in initial comments. Just
deleted these self references.
Signed-off-by: NTony Luck <tony.luck@intel.com>

Fix these two (false positive) warnings by adding an __init annoation:

WARNING: vmlinux.o(.text+0x7e6a): Section mismatch in reference from the function stp_reset() to the function .init.text:__alloc_bootmem()
The function stp_reset() references
the function __init __alloc_bootmem().
This is often because stp_reset lacks a __init
annotation or the annotation of __alloc_bootmem is wrong.

WARNING: vmlinux.o(.text+0x7ece): Section mismatch in reference from the function stp_reset() to the function .init.text:free_bootmem()
The function stp_reset() references
the function __init free_bootmem().
This is often because stp_reset lacks a __init
annotation or the annotation of free_bootmem is wrong.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The result of the diag 0x260 call is not always what one would expect.
So just remove it.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch enables memory hot-remove on s390.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

sclp_sync_wait wait synchronously for an sclp interrupt and disables
timer interrupts. However on the irq enter paths there is an extra
check if a timer interrupt would be due and calls the timer callback.
This would schedule softirqs in the wrong context.
So introduce local_tick_enable/disable which prevents this.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

During startup we check if diag308 works using diag 308 subcode 6,
which stores the actual ipl information. This fails with rc = 0x102, if
the system has been ipled from the HMC using load from CD or load from file.
In the case of rc = 0x102 we have to assume that diag 308 is working,
since it still can be used to ipl from an alternative device.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Structs called at91_nand_data where renamed to atmel_nand_data
and configs called *MTD_NAND_AT91* where renamed to
*MTD_NAND_ATMEL*. This was unfortunately not done consistently,
causing NAND chips not being initialised on several ARM boards.

I am aware that the author of the original change did not rename
MTD_NAND_AT91_BUSWIDTH to MTD_NAND_ATMEL_BUSWIDTH, for example.
All *MTD_NAND_AT91* where renamed to *MTD_NAND_ATMEL* in order
to keep naming consistency.

This patch was only tested on a MACH_SAM9_L9260, as this is the
only ARM board I have to my disposal.

Before this patch:

$ git-ls-files |xargs grep atmel_nand |wc -l
105
$ git-ls-files |xargs grep at91_nand |wc -l
4
$ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l
8
$ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l
47

After this patch:

$ git-ls-files |xargs grep atmel_nand |wc -l
109
$ git-ls-files |xargs grep at91_nand |wc -l
0
$ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l
55
$ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l
0
Signed-off-by: NPieter du Preez <pdupreez@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The z10 system supports large pages, kvm-s390 doesnt.
Make sure that we dont advertise large pages to avoid the guest crashing as
soon as the guest kernel activates DAT.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Select new LCD framebuffer driver.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The new kgdb architecture specific handler registers and unregisters
dynamically for exceptions depending on when you configure a kgdb I/O
driver.

Aside from initializing the exceptions earlier in the boot process,
kgdb should have no impact on a device when it is compiled in so long
as an I/O module is not configured for use.

There have been quite a number of contributors during the existence of
this patch (see arch/mips/kernel/kgdb.c).  Most recently Jason
re-wrote the mips kgdb logic to use the die notification handlers.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch explicitly removes the kgdb implementation, for mips which
is intended to be followed by a patch that adds a kgdb implementation
for MIPS that makes use of the kgdb core in the kernel.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Unify some entries in txx9/Kconfig.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Kill jmr3927-specific prom_putchar and add txx9-generic prom_putchar
to support early_printk.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* Unify calling of early_serial_txx9_setup.
* Use dedicated serial clock on RBTX4938.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* Random cleanups spotted by checkpatch script.
* Do not initialize panic_timeout.  "panic=" kernel parameter can be used.
* Do not add "ip=any" or "ip=bootp".  This options is not board specific.
* Do not add "root=/dev/nfs".  This is default on CONFIG_ROOT_NFS.
* Kill unused error checking.
* Fix IRQ comment to match current code.
* Kill some unneeded includes
* ST0_ERL is already cleared in generic code.
* conswitchp is initialized generic code.
* __init is not needed in prototype.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Make some TX4938 SoC specific code independent from board specific code.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Make some TX3927 SoC specific code independent from board specific code.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Unify registration of txx9wdt platform device.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Unify machine_restart/machine_halt/pm_power_off and add fallback
machine_halt routine.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Thu, 24 Jul 2008 00:25:16 +0900
Subject: [PATCH] txx9: PCI error handling

Add more control and detailed report on PCI error interrupt.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add pci options for backplane type, clock selection, error handling,
timeout values.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Introduce pcibios_plat_setup for platform-specific pcibios_setup.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* Fix tx3927 pci ops for Type-1 configuration
* Fix abort checking of tx3927 pci ops
* Flush write buffer to avoid spurious PCI error interrupt
* Add a quirk for FPCIB backplane
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* Fix wrong txx9_clockevent interrupt number
* Fix TXX9_IRQ_BASE for JMR3927+FPCIB case
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A recent generic change now catches such bugs:

<--  snip  -->

...
  CC      arch/mips/rb532/time.o
cc1: warnings being treated as errors
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c: In function 'plat_time_init':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c:55: error: comparison of distinct pointer types lacks a cast
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c:66: error: comparison of distinct pointer types lacks a cast
make[2]: *** [arch/mips/rb532/time.o] Error 1

<--  snip  -->
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

An earlier update changed some calls from simple_strotl to strict_strtol but
did not account for the differences in the syntax between the calls.
simple_strotl returns the integer; strict_strtol returns an error code and
takes a pointer to the result.  As it was, NULL was being passed in place of
the result, which led to failures during kernel initialization when using
YAMON.
Signed-off-by: NKevin Hickey <khickey@rmicorp.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Bug originally found and reported by Julia Lawall <julia@diku.dk>.  I
decieded that the whole error check was mostly useless paranoia and should
be discarded.  It would only ever trigger if r3k_have_wired_reg has a wrong
value.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

New ALIGN_DESTINATION macro has sad typo: r8d register was used instead
of ecx in fixup section. This can be considered as a regression.

Register ecx was also wrongly loaded with value in r8d in
copy_user_nocache routine.
Signed-off-by: NVitaly Mayatskikh <v.mayatskih@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Exports needed by the GRU driver.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This series of patches adds a driver for the SGI UV GRU.  The driver is
still in development but it currently compiles for both x86_64 & IA64.
All simple regression tests pass on IA64.  Although features remain to be
added, I'd like to start the process of getting the driver into the
kernel.  Additional kernel drivers will depend on services provide by the
GRU driver.

The GRU is a hardware resource located in the system chipset.  The GRU
contains memory that is mmaped into the user address space.  This memory
is used to communicate with the GRU to perform functions such as
load/store, scatter/gather, bcopy, AMOs, etc.  The GRU is directly
accessed by user instructions using user virtual addresses.  GRU
instructions (ex., bcopy) use user virtual addresses for operands.

The GRU contains a large TLB that is functionally very similar to
processor TLBs.  Because the external contains a TLB with user virtual
address, it requires callouts from the core VM system when certain types
of changes are made to the process page tables.  There are several MMUOPS
patches currently being discussed but none has been accepted into the
kernel.  The GRU driver is built using version V18 from Andrea Arcangeli.

This patch:

Contains the definitions of the hardware GRU data structures that are used
by the driver to manage the GRU.

[akpm@linux-foundation;org: export hpage_shift]
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/home/wangcong/Projects/linux-2.6/arch/um/drivers/line.c: In function `line_write_interrupt':
/home/wangcong/Projects/linux-2.6/arch/um/drivers/line.c:366: error: `struct tty_ldisc' has no member named `write_wakeup'
/home/wangcong/Projects/linux-2.6/arch/um/drivers/line.c:367: error: `struct tty_ldisc' has no member named `write_wakeup'
Signed-off-by: NWANG Cong <wangcong@zeuux.org>
Cc: Jeff Dike <jdike@addtoit.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ingo Molnar provided a fix to not call _PPC at processor driver
initialization time in "[PATCH] ACPI: fix cpufreq regression" (git
commit e4233dec)

But it can still happen that _PPC is called at processor driver
initialization time.

This patch should make sure that this is not possible anymore.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds kernel build support for the regulator core.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com>

Implement lockless get_user_pages_fast for 64-bit powerpc.

Page table existence is guaranteed with RCU, and speculative page references
are used to take a reference to the pages without having a prior existence
guarantee on them.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In PTRACE_GET/SETVSRREGS, we should be using the thread we are
ptracing rather than current.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix cut-and-paste error in the size setting for ptrace buffers for VSX.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>