- 09 1月, 2006 22 次提交
-
-
由 Christoph Hellwig 提交于
inode can never be NULL when calling this function. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Zanussi 提交于
This patch renames relayfs_file_operations to relay_file_operations, and the file operations themselves from relayfs_XXX to relay_file_XXX, to make it more clear that they refer to relay files. Signed-off-by: NTom Zanussi <zanussi@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Zanussi 提交于
This patch adds the optional is_global outparam to the create_buf_file() callback. This can be used by clients to create a single global relayfs buffer instead of the default per-cpu buffers. This was suggested as being useful for certain debugging applications where it's more convenient to be able to get all the data from a single channel without having to go to the bother of dealing with per-cpu files. Signed-off-by: NTom Zanussi <zanussi@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Zanussi 提交于
This patch adds a couple of callback functions that allow a client to hook into relay_open()/close() and supply the files that will be used to represent the channel buffers; the default implementation if no callbacks are defined is to create the files in relayfs. This is to support the creation and use of relay files in other filesystems such as debugfs, as implied by the fact that relayfs_file_operations are exported. Signed-off-by: NTom Zanussi <zanussi@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Zanussi 提交于
Since we're no longer using relayfs_inode_info, remove relayfs_alloc_inode() and relayfs_destroy_inode() along with the relayfs inode cache. Signed-off-by: NTom Zanussi <zanussi@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Zanussi 提交于
Use inode->u.generic_ip instead of relayfs_inode_info to store pointer to user data. Clients using relayfs_file_create() to create their own files would probably more expect their data to be stored in generic_ip; we also intend in the next set of patches to get rid of relayfs-specific stuff in the file operations, so we might as well do it here. Signed-off-by: NTom Zanussi <zanussi@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Zanussi 提交于
This patch adds and exports relayfs_remove_file(), for API symmetry (with relayfs_create_file()). Signed-off-by: NTom Zanussi <zanussi@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Zanussi 提交于
This patch adds a mandatory fileops param to relayfs_create_file() and exports that function so that clients can use it to create files defined by their own set of file operations, in relayfs. The purpose is to allow relayfs applications to create their own set of 'control' files alongside their relay files in relayfs rather than having to create them in /proc or debugfs for instance. relayfs_create_file() is also used by relay_open_buf() to create the relay files for a channel. In this case, a pointer to relayfs_file_operations is passed in, along with a pointer to the buffer associated with the file. Signed-off-by: NTom Zanussi <zanussi@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Zanussi 提交于
The patch series implementa or fixes 3 things that were specifically requested or suggested by relayfs users: - support for non-relay files (patches 1-6) Currently, the relayfs API only supports the creation of directories (relayfs_create_dir()) and relay files (relay_open()). These patches adds support for non-relay files (relayfs_create_file()). This is so relayfs applications can create 'control files' in relayfs itself rather than in /proc or via a netlink channel, as is currently done in the relay-app examples. Basically what this amounts to is exporting relayfs_create_file() with an additional file_ops param that clients can use to supply file operations for their own special-purpose files in relayfs. - make exported relay file ops useful (patches 7-8) The relayfs relay_file_operations have always been exported, the intent being to make it possible to create relay files in other filesystems such as debugfs. The problem, though, is that currently the file operations are too tightly coupled to relayfs to actually be used for this purpose. This patch fixes that by adding a couple of callback functions that allow a client to hook into relay_open()/close() and supply the files that will be used to represent the channel buffers; the default implementation if no callbacks are defined is to create the files in relayfs. - add an option to create global relay buffer (patches 9-10) The file creation callback also supplies an optional param, is_global, that can be used by clients to create a single global relayfs buffer instead of the default per-cpu buffers. This was suggested as being useful for certain debugging applications where it's more convenient to be able to get all the data from a single channel without having to go to the bother of dealing with per-cpu files. - cleanup, some renaming and Documentation updates (patches 11-12) There were several comments that the use of netlink in the example code was non-intuitive and in fact the whole relay-app business was needlessly confusing. Based on that feedback, the example code has been completely converted over to relayfs control files as supported by this patch, and have also been made completely self-contained. The converted examples along with a couple of new examples that demonstrate using exported relay files can be found in relay-apps tarball: http://prdownloads.sourceforge.net/relayfs/relay-apps-0.9.tar.gz?download This patch: Separate buffer create/destroy from inode create/destroy. We want to be able to associate other data and not just relay buffers with inodes. Buffer create/destroy is moved out of inode.c and into relayfs core code. Signed-off-by: NTom Zanussi <zanussi@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Use atomic_inc_not_zero for rcu files instead of special case rcuref. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 OGAWA Hirofumi 提交于
This patch add EXPORT_SYMBOL(filemap_write_and_wait) and use it. See mm/filemap.c: And changes the filemap_write_and_wait() and filemap_write_and_wait_range(). Current filemap_write_and_wait() doesn't wait if filemap_fdatawrite() returns error. However, even if filemap_fdatawrite() returned an error, it may have submitted the partially data pages to the device. (e.g. in the case of -ENOSPC) <quotation> Andrew Morton writes, If filemap_fdatawrite() returns an error, this might be due to some I/O problem: dead disk, unplugged cable, etc. Given the generally crappy quality of the kernel's handling of such exceptions, there's a good chance that the filemap_fdatawait() will get stuck in D state forever. </quotation> So, this patch doesn't wait if filemap_fdatawrite() returns the -EIO. Trond, could you please review the nfs part? Especially I'm not sure, nfs must use the "filemap_fdatawrite(inode->i_mapping) == 0", or not. Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 OGAWA Hirofumi 提交于
This patch changes generic_cont_expand(), in order to share the code with fatfs. - Use vmtruncate() if ->prepare_write() returns a error. Even if ->prepare_write() returns an error, it may already have added some blocks. So, this truncates blocks outside of ->i_size by vmtruncate(). - Add generic_cont_expand_simple(). The generic_cont_expand_simple() assumes that ->prepare_write() can handle the block boundary. With this, we don't need to care the extra byte. And for expanding a file size by truncate(), fatfs uses the added generic_cont_expand_simple(). Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 OGAWA Hirofumi 提交于
This patch add to support of ->direct_IO() for mostly read. The user of this seems to want to use for streaming read. So, current direct I/O has limitation, it can only overwrite. (For write operation, mainly we need to handle the hole etc..) Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 OGAWA Hirofumi 提交于
All EXPORT_SYMBOL of fatfs is only for vfat/msdos. _GPL would be proper. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 OGAWA Hirofumi 提交于
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 OGAWA Hirofumi 提交于
We don't need to allocate buffer for checking the buffer is uptodate. This use sb_find_get_block() instead, and if it returns NULL it's not uptodate. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 OGAWA Hirofumi 提交于
It is overkill to update the FS_INFO whenever modifying prev_free/free_clusters, because those are just a hint. So, this patch uses ->write_super() for updating FS_INFO instead. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matt Mackall 提交于
configurable replacement for slab allocator This adds a CONFIG_SLAB option under CONFIG_EMBEDDED. When CONFIG_SLAB is disabled, the kernel falls back to using the 'SLOB' allocator. SLOB is a traditional K&R/UNIX allocator with a SLAB emulation layer, similar to the original Linux kmalloc allocator that SLAB replaced. It's signicantly smaller code and is more memory efficient. But like all similar allocators, it scales poorly and suffers from fragmentation more than SLAB, so it's only appropriate for small systems. It's been tested extensively in the Linux-tiny tree. I've also stress-tested it with make -j 8 compiles on a 3G SMP+PREEMPT box (not recommended). Here's a comparison for otherwise identical builds, showing SLOB saving nearly half a megabyte of RAM: $ size vmlinux* text data bss dec hex filename 3336372 529360 190812 4056544 3de5e0 vmlinux-slab 3323208 527948 190684 4041840 3dac70 vmlinux-slob $ size mm/{slab,slob}.o text data bss dec hex filename 13221 752 48 14021 36c5 mm/slab.o 1896 52 8 1956 7a4 mm/slob.o /proc/meminfo: SLAB SLOB delta MemTotal: 27964 kB 27980 kB +16 kB MemFree: 24596 kB 25092 kB +496 kB Buffers: 36 kB 36 kB 0 kB Cached: 1188 kB 1188 kB 0 kB SwapCached: 0 kB 0 kB 0 kB Active: 608 kB 600 kB -8 kB Inactive: 808 kB 812 kB +4 kB HighTotal: 0 kB 0 kB 0 kB HighFree: 0 kB 0 kB 0 kB LowTotal: 27964 kB 27980 kB +16 kB LowFree: 24596 kB 25092 kB +496 kB SwapTotal: 0 kB 0 kB 0 kB SwapFree: 0 kB 0 kB 0 kB Dirty: 4 kB 12 kB +8 kB Writeback: 0 kB 0 kB 0 kB Mapped: 560 kB 556 kB -4 kB Slab: 1756 kB 0 kB -1756 kB CommitLimit: 13980 kB 13988 kB +8 kB Committed_AS: 4208 kB 4208 kB 0 kB PageTables: 28 kB 28 kB 0 kB VmallocTotal: 1007312 kB 1007312 kB 0 kB VmallocUsed: 48 kB 48 kB 0 kB VmallocChunk: 1007264 kB 1007264 kB 0 kB (this work has been sponsored in part by CELF) From: Ingo Molnar <mingo@elte.hu> Fix 32-bitness bugs in mm/slob.c. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
RCU tasklist_lock and RCU signal handling: send signals RCU-read-locked instead of tasklist_lock read-locked. This is a scalability improvement on SMP and a preemption-latency improvement under PREEMPT_RCU. Signed-off-by: NPaul E. McKenney <paulmck@us.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NWilliam Irwin <wli@holomorphy.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Suppress configuration of certain features for the FRV arch as they can't be built for FRV at the moment: (*) RTC (*) HISAX_* (*) PARPORT_PC (*) VGA_CONSOLE (*) BINFMT_ELF Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
First discussed at http://marc.theaimsgroup.com/?t=113149255100001&r=1&w=2 - Use the check_range() in mempolicy.c to gather statistics. - Improve the numa_maps code in general and fix some comments. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Add /proc/sys/vm/drop_caches. When written to, this will cause the kernel to discard as much pagecache and/or reclaimable slab objects as it can. THis operation requires root permissions. It won't drop dirty data, so the user should run `sync' first. Caveats: a) Holds inode_lock for exorbitant amounts of time. b) Needs to be taught about NUMA nodes: propagate these all the way through so the discarding can be controlled on a per-node basis. This is a debugging feature: useful for getting consistent results between filesystem benchmarks. We could possibly put it under a config option, but it's less than 300 bytes. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 1月, 2006 18 次提交
-
-
由 Evgeniy 提交于
This patch should fix compilation failure of fs/ufs/dir.c with defined UFS_DIR_DEBUG Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Trond Myklebust 提交于
If the loop errors, we need to exit. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If someone changes the uid/gid mapping in userland, then we do eventually want those changes to be propagated to the kernel. Currently the kernel assumes that it may cache entries forever. Add an expiration time + garbage collector for idmap entries. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
inode->i_mode contains a lot more than just the mode bits. Make sure that we mask away this extra stuff in SETATTR calls to the server. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: Every ULP that uses the in-kernel RPC client, except the NLM client, sets cl_chatty. There's no reason why NLM shouldn't set it, so just get rid of cl_chatty and always be verbose. Test-plan: Compile with CONFIG_NFS enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
We'd like to hide fields in rpc_xprt and rpc_clnt from upper layer protocols. Start by creating an API to force RPC rebind, replacing logic that simply sets cl_port to zero. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. NFSv2/3 and NFSv4 mounting should be carefully checked. Probably need to rig a server where certain services aren't running, or that returns an error for some typical operation. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Thanks to Ed Keizer for bug and root cause. He says: "... we could only mount the top-level Solaris share. We could not mount deeper into the tree. Investigation showed that Solaris allows UNIX authenticated FSINFO only on the top level of the share. This is a problem because we share/export our home directories one level higher than we mount them. I.e. we share the partition and not the individual home directories. This prevented access to home directories." We still may need to try auth_sys for the case where the client doesn't have appropriate credentials. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
The procedure that decodes statd sm_notify call seems to be skipping a few arguments. How did this ever work? >From folks at Polyserve. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
If the server receives an NLM cancel call and finds no waiting lock to cancel, then chances are the lock has already been applied, and the client just hadn't yet processed the NLM granted callback before it sent the cancel. The Open Group text, for example, perimts a server to return either success (LCK_GRANTED) or failure (LCK_DENIED) in this case. But returning an error seems more helpful; the client may be able to use it to recognize that a race has occurred and to recover from the race. So, modify the relevant functions to return an error in this case. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
The fl_next check here is superfluous (and possibly a layering violation). Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Currently when lockd gets an NLM_CANCEL request, it also does an unlock for the same range. This is incorrect. The Open Group documentation says that "This procedure cancels an *outstanding* blocked lock request." (Emphasis mine.) Also, consider a client that holds a lock on the first byte of a file, and requests a lock on the entire file. If the client cancels that request (perhaps because the requesting process is signalled), the server shouldn't apply perform an unlock on the entire file, since that will also remove the previous lock that the client was already granted. Or consider a lock request that actually *downgraded* an exclusive lock to a shared lock. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Slightly simpler logic here makes it more trivial to verify that the up's and down's are balanced here. Break out an assignment from a conditional while we're at it. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and ensure that nfs_update_inode() respects wcc Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Upon return of a write delegation, the server will almost always bump the change attribute. Ensure that we pick up that change so that we don't invalidate our data cache unnecessarily. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
According to RFC3530 we're supposed to cache the change attribute at the time the client receives a write delegation. If the inode is clean, a CB_GETATTR callback by the server to the client is supposed to return the cached change attribute. If, OTOH, the inode is dirty, the client should bump the cached change attribute by 1. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and avoid calling set_page_dirty on them Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-