Revert

    commit 71de1ccb
    Author:     KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
    AuthorDate: Mon Sep 21 17:01:31 2009 -0700
    Commit:     Linus Torvalds <torvalds@linux-foundation.org>
    CommitDate: Tue Sep 22 07:17:27 2009 -0700

        mm: oom analysis: add buffer cache information to show_free_areas()

show_free_areas() is called during page allocation failures, and page
allocation failures can occur in any calling context.

But nr_blockdev_pages() takes VFS locks which should not be taken from
hard IRQ context (at least).  The result is lockdep warnings (and
deadlockability) during page allocation failures.

Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit 8aa7e847 (Fix congestion_wait() sync/async vs read/write
confusion) replace WRITE with BLK_RW_ASYNC.  Unfortunately, concurrent mm
development made the unchanged place accidentally.

This patch fixes it too.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory failure on a KSM page currently oopses on its NULL anon_vma in
page_lock_anon_vma(): that may not be much worse than the consequence of
ignoring it, but it is better to be consistent with how ZERO_PAGE and
hugetlb pages and other awkward cases are treated.  Just skip it.

We could fix it for 2.6.32 at the KSM end, by putting a dummy anon_vma
pointer in there; but that would get harder next time, when KSM will put a
pointer to something else there (and I'm not currently planning to do any
work to open that up to memory_failure).  So I would prefer this simple
PageKsm test, until the other exceptions are handled.
Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following two compile warnings which show up on i386.

mm/percpu.c:1873: warning: comparison of distinct pointer types lacks a cast
mm/percpu.c:1879: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'size_t'
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>

After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>

This patch adds NULL pointer checking in the early_alloc() function.
Reported-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can't use GFP_KERNEL inside rcu_read_lock().
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The space is not script friendly, kill it.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

It makes sense to do IOWAIT when someone is blocked
due to IO throttle, as suggested by Kame and Peter.

There is an old comment for not doing IOWAIT on throttle,
however it has been mismatching the code for a long time.

If we stop accounting IOWAIT for 2.6.32, it could be an
undesirable behavior change. So restore the io_schedule.

CC: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

When a vmalloc'd area is mmap'd into userspace, some kind of
co-ordination is necessary for this to work on platforms with cpu
D-caches which can have aliases.

Otherwise kernel side writes won't be seen properly in userspace
and vice versa.

If the kernel side mapping and the user side one have the same
alignment, modulo SHMLBA, this can work as long as VM_SHARED is
shared of VMA and for all current users this is true.  VM_SHARED
will force SHMLBA alignment of the user side mmap on platforms with
D-cache aliasing matters.

The bulk of this patch is just making it so that a specific
alignment can be passed down into __get_vm_area_node().  All
existing callers pass in '1' which preserves existing behavior.
vmalloc_user() gives SHMLBA for the alignment.

As a side effect this should get the video media drivers and other
vmalloc_user() users into more working shape on such systems.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
LKML-Reference: <200909211922.n8LJMYjw029425@imap1.linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix the following 'make includecheck' warning:

  mm/vmalloc.c: linux/highmem.h is included more than once.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adjust the max_kernel_pages default to a quarter of totalram_pages,
instead of nr_free_buffer_pages() / 4: the KSM pages themselves come from
highmem, and even on a 16GB PAE machine, 4GB of KSM pages would only be
pinning 32MB of lowmem with their rmap_items, so no need for the more
obscure calculation (nor for its own special init function).

There is no way for the user to switch KSM on if CONFIG_SYSFS is not
enabled, so in that case default run to KSM_RUN_MERGE.

Update KSM Documentation and Kconfig to reflect the new defaults.
Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In charge/uncharge/reclaim path, usage_in_excess is calculated repeatedly
and it takes res_counter's spin_lock every time.

This patch removes unnecessary calls for res_count_soft_limit_excess.
Reviewed-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch clean up/fixes for memcg's uncharge soft limit path.

Problems:
  Now, res_counter_charge()/uncharge() handles softlimit information at
  charge/uncharge and softlimit-check is done when event counter per memcg
  goes over limit. Now, event counter per memcg is updated only when
  memory usage is over soft limit. Here, considering hierarchical memcg
  management, ancesotors should be taken care of.

  Now, ancerstors(hierarchy) are handled in charge() but not in uncharge().
  This is not good.

  Prolems:
  1. memcg's event counter incremented only when softlimit hits. That's bad.
     It makes event counter hard to be reused for other purpose.

  2. At uncharge, only the lowest level rescounter is handled. This is bug.
     Because ancesotor's event counter is not incremented, children should
     take care of them.

  3. res_counter_uncharge()'s 3rd argument is NULL in most case.
     ops under res_counter->lock should be small. No "if" sentense is better.

Fixes:
  * Removed soft_limit_xx poitner and checks in charge and uncharge.
    Do-check-only-when-necessary scheme works enough well without them.

  * make event-counter of memcg incremented at every charge/uncharge.
    (per-cpu area will be accessed soon anyway)

  * All ancestors are checked at soft-limit-check. This is necessary because
    ancesotor's event counter may never be modified. Then, they should be
    checked at the same time.
Reviewed-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__mem_cgroup_largest_soft_limit_node() returns a mem_cgroup_per_zone "mz"
with incremnted mz->mem->css's refcnt.  Then, the caller of this function
has to call css_put(mz->mem->css).

But, mz can be !NULL even if "not found" i.e.  without css_get().  By
this, css->refcnt will go down to minus.

This may cause various things...one of results will be
initite-loop in css_tryget()  as this.

INFO: RCU detected CPU 0 stall (t=10000 jiffies)
sending NMI to all CPUs:
NMI backtrace for cpu 0
CPU 0:
<snip>

 <<EOE>>  <IRQ>  [<ffffffff810884bd>] trace_hardirqs_off+0xd/0x10
  [<ffffffff8102a940>] flat_send_IPI_mask+0x90/0xb0
  [<ffffffff8102a9c9>] flat_send_IPI_all+0x69/0x70
  [<ffffffff81027372>] arch_trigger_all_cpu_backtrace+0x62/0xa0
  [<ffffffff810bff8e>] __rcu_pending+0x7e/0x370
  [<ffffffff810c02c7>] rcu_check_callbacks+0x47/0x130
  [<ffffffff81063a26>] update_process_times+0x46/0x70
  [<ffffffff81085930>] tick_sched_timer+0x60/0x160
  [<ffffffff810858d0>] ? tick_sched_timer+0x0/0x160
  [<ffffffff8107a03a>] __run_hrtimer+0xba/0x150
  [<ffffffff8107a325>] hrtimer_interrupt+0xd5/0x1b0
  [<ffffffff81426dfe>] ? trace_hardirqs_off_thunk+0x3a/0x3c
  [<ffffffff8142cacd>] smp_apic_timer_interrupt+0x6d/0x9b
  [<ffffffff8100cb33>] apic_timer_interrupt+0x13/0x20
  <EOI>  [<ffffffff811317b6>] ? mem_cgroup_walk_tree+0x156/0x180
  [<ffffffff811316d3>] ? mem_cgroup_walk_tree+0x73/0x180
  [<ffffffff81131692>] ? mem_cgroup_walk_tree+0x32/0x180
  [<ffffffff81131a00>] ? mem_cgroup_get_local_stat+0x0/0x110
  [<ffffffff81131d5b>] ? mem_control_stat_show+0x14b/0x330
  [<ffffffff810a57fd>] ? cgroup_seqfile_show+0x3d/0x60

Above shows CPU0 caught in css_tryget()'s inifinite loop because
of bad refcnt.

This is a fix to set mz=NULL at the top of retry path.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NPaul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The page_address_in_vma() is not only used in unuse_vma().
Signed-off-by: NHuang Shijie <shijie8@gmail.com>
Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While testing Swap over NFS patchset, I noticed an oops that was triggered
during swapon. Investigating further, the NULL pointer deference is due to the
SSD device check/optimization in the swapon code that assumes s_bdev could never
be NULL.

inode->i_sb->s_bdev could be NULL in a few cases. For e.g. one such case is
loopback NFS mount, there could be others as well. Fix this by ensuring s_bdev
is not NULL before we try to deference s_bdev.
Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Warn and dump stack when percpu allocation fails.  percpu allocator is
still young and unchecked NULL percpu pointer usage can result in
random memory corruption when combined with the pointer shifting in
access macros.  Allocation failures should be rare and the warning
message will be disabled after certain times.
Signed-off-by: NTejun Heo <tj@kernel.org>

The parameters to pcpu_setup_first_chunk() come from different sources
depending on architecture and can be quite complex.  The function runs
various sanity checks on the parameters and triggers BUG() if
something isn't right.  However, this is very early during the boot
and not reporting exactly what the problem is makes debugging even
harder.

Add PCPU_SETUP_BUG() macro which prints out enough information about
the parameters.  As the macro still puts separate BUG() for each
check, it won't lose any information even on the situations where only
the program counter can be retrieved.

While at it, also bump pcpu_dump_alloc_info() message to KERN_INFO so
that it's visible on the console if boot fails to complete.
Signed-off-by: NTejun Heo <tj@kernel.org>

Embedding first chunk allocator maintains the distances between units
in the vmalloc area and thus needs vmalloc space to be larger than the
maximum distances between units; otherwise, it wouldn't be able to
create any dynamic chunks.  This patch makes the embedding first chunk
allocator check vmalloc space size and if the maximum distance between
units is larger than 75% of it, print warning and, if page mapping
allocator is available, fail initialization so that the system falls
back onto it.

This should work around percpu allocation failure problems on certain
sparc64 configurations where distances between NUMA nodes are larger
than the vmalloc area and makes percpu allocator more robust for
future configurations.
Signed-off-by: NTejun Heo <tj@kernel.org>

pcpu_build_alloc_info() may be called multiple times when percpu is
falling back to different first chunk allocator.  Make it clear static
buffers so that they don't contain values from previous runs.
Signed-off-by: NTejun Heo <tj@kernel.org>

pcpu_setup_first_chunk() incorrectly used NR_CPUS as the impossible
unit number while unit number can equal and go over NR_CPUS with
sparse unit map.  This triggers BUG_ON() spuriously on machines which
have non-power-of-two number of cpus.  Use UINT_MAX instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-and-tested-by: NTony Vroon <tony@linx.net>

* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This build failure triggers:

 In file included from include/linux/suspend.h:8,
                 from arch/x86/kernel/asm-offsets_32.c:11,
                 from arch/x86/kernel/asm-offsets.c:2:
 include/linux/mm.h:503:2: error: #error SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS

Because due to the hwpoison page flag we ran out of page
flags on 32-bit.

Dont turn on hwpoison on 32-bit NUMA (it's rare in any
case).

Also clean up the Kconfig dependencies in the generic MM
code by introducing ARCH_SUPPORTS_MEMORY_FAILURE.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Sometimes we only want to write pages from a specific super_block,
so allow that to be passed in.

This fixes a problem with commit 56a131dc
causing writeback on all super_blocks on a bdi, where we only really
want to sync a specific sb from writeback_inodes_sb().
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Treat bdi_start_writeback(0) as a special request to do background write,
and stop such work when we are below the background dirty threshold.

Also simplify the (nr_pages <= 0) checks. Since we already pass in
nr_pages=LONG_MAX for WB_SYNC_ALL and background writes, we don't
need to worry about it being decreased to zero.
Reported-by: NRichard Kennedy <richard@rsk.demon.co.uk>
CC: Jan Kara <jack@suse.cz>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Some filesystem may choose to write much more than ratelimit_pages
before calling balance_dirty_pages_ratelimited_nr(). So it is safer to
determine number to write based on real number of dirtied pages.

Otherwise it is possible that
  loop {
    btrfs_file_write():     dirty 1024 pages
    balance_dirty_pages():  write up to 48 pages (= ratelimit_pages * 1.5)
  }
in which the writeback rate cannot keep up with dirty rate, and the
dirty pages go all the way beyond dirty_thresh.

The increased write_chunk may make the dirtier more bumpy.
So filesystems shall be take care not to dirty too much at
a time (eg. > 4MB) without checking the ratelimit.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Ignore the address parameter given to NOMMU mmap() as it is a hint, rather
than giving an error if it's non-zero.  MAP_FIXED still gets an error.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix MAP_PRIVATE mmap() of files and devices where the data in the backing store
might be mapped directly.  Use the BDI_CAP_MAP_DIRECT capability flag to govern
whether or not we should be trying to map a file directly.  This can be used to
determine whether or not a region has been filled in at the point where we call
do_mmap_shared() or do_mmap_private().

The BDI_CAP_MAP_DIRECT capability flag is cleared by validate_mmap_request() if
there's any reason we can't use it.  It's also cleared in do_mmap_pgoff() if
f_op->get_unmapped_area() fails.

Without this fix, attempting to run a program from a RomFS image on a
non-mappable MTD partition results in a BUG as the kernel attempts XIP, and
this can be caught in gdb:

Program received signal SIGABRT, Aborted.
0xc005dce8 in add_nommu_region (region=<value optimized out>) at mm/nommu.c:547
(gdb) bt
#0  0xc005dce8 in add_nommu_region (region=<value optimized out>) at mm/nommu.c:547
#1  0xc005f168 in do_mmap_pgoff (file=0xc31a6620, addr=<value optimized out>, len=3808, prot=3, flags=6146, pgoff=0) at mm/nommu.c:1373
#2  0xc00a96b8 in elf_fdpic_map_file (params=0xc33fbbec, file=0xc31a6620, mm=0xc31bef60, what=0xc0213144 "executable") at mm.h:1145
#3  0xc00aa8b4 in load_elf_fdpic_binary (bprm=0xc316cb00, regs=<value optimized out>) at fs/binfmt_elf_fdpic.c:343
#4  0xc006b588 in search_binary_handler (bprm=0x6, regs=0xc33fbce0) at fs/exec.c:1234
#5  0xc006c648 in do_execve (filename=<value optimized out>, argv=0xc3ad14cc, envp=0xc3ad1460, regs=0xc33fbce0) at fs/exec.c:1356
#6  0xc0008cf0 in sys_execve (name=<value optimized out>, argv=0xc3ad14cc, envp=0xc3ad1460) at arch/frv/kernel/process.c:263
#7  0xc00075dc in __syscall_call () at arch/frv/kernel/entry.S:897

Note that this fix does the following commit differently:

	commit a190887b
	Author: David Howells <dhowells@redhat.com>
	Date:   Sat Sep 5 11:17:07 2009 -0700
	nommu: fix error handling in do_mmap_pgoff()
Reported-by: NGraff Yang <graff.yang@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It needs walk_page_range().
Reported-by: NMichal Simek <monstr@monstr.eu>
Tested-by: NMichal Simek <monstr@monstr.eu>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's unused.

It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.

It _was_ used in two places at arch/frv for some reason.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We now count MEM_CGROUP_STAT_SWAPOUT, so we can show swap usage.  It would
be useful for users to show swap usage in memory.stat file, because they
don't need calculate memsw.usage - res.usage to know swap usage.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reduce the resource counter overhead (mostly spinlock) associated with the
root cgroup.  This is a part of the several patches to reduce mem cgroup
overhead.  I had posted other approaches earlier (including using percpu
counters).  Those patches will be a natural addition and will be added
iteratively on top of these.

The patch stops resource counter accounting for the root cgroup.  The data
for display is derived from the statisitcs we maintain via
mem_cgroup_charge_statistics (which is more scalable).  What happens today
is that, we do double accounting, once using res_counter_charge() and once
using memory_cgroup_charge_statistics().  For the root, since we don't
implement limits any more, we don't need to track every charge via
res_counter_charge() and check for limit being exceeded and reclaim.

The main mem->res usage_in_bytes can be derived by summing the cache and
rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and
MEM_CGROUP_STAT_CACHE).  However, for memsw->res usage_in_bytes, we need
additional data about swapped out memory.  This patch adds a
MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and
MEM_CGROUP_STAT_CACHE to derive the memsw data.  This data is computed
recursively when hierarchy is enabled.

The tests results I see on a 24 way show that

1. The lock contention disappears from /proc/lock_stats
2. The results of the test are comparable to running with
   cgroup_disable=memory.

Here is a sample of my program runs

Without Patch

 Performance counter stats for '/home/balbir/parallel_pagefault':

 7192804.124144  task-clock-msecs         #     23.937 CPUs
         424691  context-switches         #      0.000 M/sec
            267  CPU-migrations           #      0.000 M/sec
       28498113  page-faults              #      0.004 M/sec
  5826093739340  cycles                   #    809.989 M/sec
   408883496292  instructions             #      0.070 IPC
     7057079452  cache-references         #      0.981 M/sec
     3036086243  cache-misses             #      0.422 M/sec

  300.485365680  seconds time elapsed

With cgroup_disable=memory

 Performance counter stats for '/home/balbir/parallel_pagefault':

 7182183.546587  task-clock-msecs         #     23.915 CPUs
         425458  context-switches         #      0.000 M/sec
            203  CPU-migrations           #      0.000 M/sec
       92545093  page-faults              #      0.013 M/sec
  6034363609986  cycles                   #    840.185 M/sec
   437204346785  instructions             #      0.072 IPC
     6636073192  cache-references         #      0.924 M/sec
     2358117732  cache-misses             #      0.328 M/sec

  300.320905827  seconds time elapsed

With this patch applied

 Performance counter stats for '/home/balbir/parallel_pagefault':

 7191619.223977  task-clock-msecs         #     23.955 CPUs
         422579  context-switches         #      0.000 M/sec
             88  CPU-migrations           #      0.000 M/sec
       91946060  page-faults              #      0.013 M/sec
  5957054385619  cycles                   #    828.333 M/sec
  1058117350365  instructions             #      0.178 IPC
     9161776218  cache-references         #      1.274 M/sec
     1920494280  cache-misses             #      0.267 M/sec

  300.218764862  seconds time elapsed

Data from Prarit (kernel compile with make -j64 on a 64
CPU/32G machine)

For a single run

Without patch

real 27m8.988s
user 87m24.916s
sys 382m6.037s

With patch

real    4m18.607s
user    84m58.943s
sys     50m52.682s

With config turned off

real    4m54.972s
user    90m13.456s
sys     50m19.711s

NOTE: The data looks counterintuitive due to the increased performance
with the patch, even over the config being turned off. We probably need
more runs, but so far all testing has shown that the patches definitely
help.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement reclaim from groups over their soft limit

Permit reclaim from memory cgroups on contention (via the direct reclaim
path).

memory cgroup soft limit reclaim finds the group that exceeds its soft
limit by the largest number of pages and reclaims pages from it and then
reinserts the cgroup into its correct place in the rbtree.

Add additional checks to mem_cgroup_hierarchical_reclaim() to detect long
loops in case all swap is turned off.  The code has been refactored and
the loop check (loop < 2) has been enhanced for soft limits.  For soft
limits, we try to do more targetted reclaim.  Instead of bailing out after
two loops, the routine now reclaims memory proportional to the size by
which the soft limit is exceeded.  The proportion has been empirically
determined.

[akpm@linux-foundation.org: build fix]
[kamezawa.hiroyu@jp.fujitsu.com: fix softlimit css refcnt handling]
[nishimura@mxp.nes.nec.co.jp: refcount of the "victim" should be decremented before exiting the loop]
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Refactor mem_cgroup_hierarchical_reclaim()

Refactor the arguments passed to mem_cgroup_hierarchical_reclaim() into
flags, so that new parameters don't have to be passed as we make the
reclaim routine more flexible
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Organize cgroups over soft limit in a RB-Tree

Introduce an RB-Tree for storing memory cgroups that are over their soft
limit.  The overall goal is to

1. Add a memory cgroup to the RB-Tree when the soft limit is exceeded.
   We are careful about updates, updates take place only after a particular
   time interval has passed
2. We remove the node from the RB-Tree when the usage goes below the soft
   limit

The next set of patches will exploit the RB-Tree to get the group that is
over its soft limit by the largest amount and reclaim from it, when we
face memory contention.

[hugh.dickins@tiscali.co.uk: CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_PREEMPT=y fails to boot]
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an interface to allow get/set of soft limits.  Soft limits for memory
plus swap controller (memsw) is currently not supported.  Resource
counters have been enhanced to support soft limits and new type
RES_SOFT_LIMIT has been added.  Unlike hard limits, soft limits can be
directly set and do not need any reclaim or checks before setting them to
a newer value.

Kamezawa-San raised a question as to whether soft limit should belong to
res_counter.  Since all resources understand the basic concepts of hard
and soft limits, it is justified to add soft limits here.  Soft limits are
a generic resource usage feature, even file system quotas support soft
limits.
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add comments for the reason of smp_wmb() in mem_cgroup_commit_charge().

[akpm@linux-foundation.org: coding-style fixes]
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change the memory cgroup to remove the overhead associated with accounting
all pages in the root cgroup.  As a side-effect, we can no longer set a
memory hard limit in the root cgroup.

A new flag to track whether the page has been accounted or not has been
added as well.  Flags are now set atomically for page_cgroup,
pcg_default_flags is now obsolete and removed.

[akpm@linux-foundation.org: fix a few documentation glitches]
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>