- 28 9月, 2006 40 次提交
-
-
由 Alan Stern 提交于
This patch (as778) adds a field to struct usb_device to store the device's level in the USB tree. In itself this number isn't really important. But the overhead is very low, and in a later patch it will be used for preventing bogus warnings from the lockdep checker. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
The command "cdrecord dev=/dev/uba x.iso" prints nasty garbage if a blank is not in the drive. This happens because drivers have to set req->errors separately from just returning zero uptodate with end_that_request_first, end_that_request_last. These functions only set error in BIO, but sg_io() ignores it. Since we're on it, let cdrecord access a device when ->changed is set. It's useful if someone wants to know device capabilities without burning anything. Signed-Off-By: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Reiner Herrmann 提交于
Replace spaces with tab and change comment indention for better readability. Signed-off-by: NReiner Herrmann <reiner@reiner-h.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This includes two one-liners forwarded to me for the OHCI support on at91: - KB920x (and other boards with CPUs in non-BGA packages) need a slightly different way to say "ignore that port, it's not pinned out"; - On resume, if we turn clocks on, record that we did so. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This updates the code handling dma-coherent buffer allocations, basically reusing code from the musb_hdrc driver. Instead of trying to work around two significant limitations of the dma framework (memory wastage for buffers smaller than a page, and inconsistency between calling context requirements for allocation and free) this just works around one of them (the latter). So count this as two steps forward (bugfixes: the latter issue could cause errors on some platforms, and some MIPS changes broke code for the former), and one step back (increasing cross-platform memory wastage). Plus linelength and whitespace fixes; and minor data segment shrinkage. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eugeny S. Mints 提交于
Adjust dev->dev_lock spinlock lock/unlock calls to be safe for SMP case. Otherwise the following sequence may lead to a deadlock in SMP case: gs_send()->usb_ep_queue() ->(in case a request is satisfied immediatly) gs_write_complete() for ex for pxa2xx_udc.c: usb_ep_queue()->pxa2xx_ep_queue()->write_fifo()->done()->gs_write_complete() (through req.complete pointer) Signed-off-by: NEugeny S. Mints <emints@ru.mvista.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Dharm 提交于
Replaced kernel_thread() with kthread_run() since kernel_thread() is deprecated in drivers/modules. Signed-off-by: NCedric Le Goater <clg@fr.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Skip Hansen 提交于
For ep0out transfers (rare), be sure to copy the right data to userspace. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
[ ... when you have an editor set to remind you of whitespace bugs ... ] Cosmetic EHCI changes: remove end-of-line whitespace, spaces before tabs. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
For systems using the Mentor HDRC controllers we get better TX DMA throughput if we can avoid falling back to PIO to write zero length packets ... so tell the driver to avoid ZLPs. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as755b) fixes a bug in usbmon. Rather than assuming all USB host controllers use DMA, the code will check the usb_bus data structure. If DMA isn't used, we don't want to try peeking into a non-existent DMA buffer! Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as770b) introduces a new field to usb_bus: a flag indicating whether or not the host controller uses DMA. This serves to encapsulate the computation. It also means we will have only one spot to update if the DMA API changes. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
All of the currently-supported USB host controller drivers use the HCD bus-glue framework. As part of the program for flattening out the glue layer, this patch (as769) removes the usb_operations structure. All function calls now go directly to the HCD routines (slightly renamed to remain within the "usb_" namespace). The patch also removes usb_alloc_bus(), because it's not useful in the HCD framework and it wasn't referenced anywhere. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
Fix CONFIG_PM=n build. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alexey Dobriyan 提交于
drivers/usb/core/hub.c: In function `hub_events': drivers/usb/core/hub.c:2591: warning: statement with no effect Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
It's generally a bad idea for USB interface drivers to try to change a device's configuration, and usbcore doesn't provide any way for them to do it. However in a few exceptional circumstances it can make sense. This patch (as767) adds a roundabout mechanism to help drivers that may need it. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
The UFI specification doesn't permit devices to indicate non-existent LUNs in the manner prescribed by the SCSI spec. This patch (as773) sets a special flag so that the SCSI scanner will recognize these devices and treat them specially. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jules Villard 提交于
This tiny patch fixes a typo in drivers/usb/gadget/Kconfig. The typo is present in 2.6.18-rc4 and in the corresponding -mm tree (and AFAIK, FYI and FWIW was present in previous kernel versions as well). From: Jules Villard <jvillard@ens-lyon.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric Sesterhenn 提交于
another gcc 4.1 signdness warning: drivers/usb/gadget/ether.c:2028: warning: comparison of unsigned expression < 0 is always false length is assigned the value of usb_ep_queue() which returns an int. Directly after this it is checked for < 0, which can never be true. Making length an int makes the error check work again. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Acked-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
This patch marks some USB core's functions parameters as const. This improves the design (we're saying to the caller that its parameter is not going to be modified) and may help in compiler's optimisation work. Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Inaky Perez-Gonzalez 提交于
New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: NInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Inaky Perez-Gonzalez 提交于
This patch teaches the USB stack handling of WUSB devices (those whose speed is USB_SPEED_VARIABLE). For these devices, we need to set ep0's maxpacketsize to 512 (even though the device descriptor reports it as 0xff). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: NInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Inaky Perez-Gonzalez 提交于
This patch enables the USB stack to recognize WUSB devices (from a WUSB HCD) and assigns them the proper speed setting (USB_SPEED_VARIABLE). 1. Introduce usb_hcd->wireless to mark a host controller instance as being wireless, and thus having wireless 'fake' ports. [discarded previous model of using a reserved bit in the port_stat struct to do this; thanks to Alan Stern for indicating the proper way to do it]. 2. Introduce hub.c:hub_is_wusb() that tests if a hub is a WUSB root hub (WUSB doesn't have non-root hubs). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by: NInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Inaky Perez-Gonzalez 提交于
Change usb_get_configuration() so that it is more tolerant to devices with bad configuration descriptors (it'll make it ignore configurations that fail to load). Signed-off-by: NInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Dharm 提交于
This changeset from Keith Bennett (via Bob Copeland) moves the Karma initializer to its own file and adds trapping of the START_STOP command to enable eject of the device. Signed-off-by: NKeith Bennett <keith@mcs.st-and.ac.uk> Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
o CodingStyle fixes o Removes trailing spaces o Do not make not needed initialiation of automatic variables o Use usb_endpoint_* functions o If we get an error in the write URB callback print an error message instead of a debug one (Pretty unrelated changes, but spliting this up doesn't pay off as our main changes are just CodingStyle fixes). Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
We don't want khubd to start interfering in the device-resume process merely because the PORT_STATUS_C_SUSPEND feature happens to be set. Ports need to be marked as busy while a resume is taking place. In addition, so long as ports are marked as busy, khubd won't be able to clear their various status-change features. On an interrupt-driven root hub this could lead to an interrupt storm. Root hub IRQs should not be re-enabled until the busy_bits value is equal to 0. This patch (as765) fixes these two potential problems. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
The inconsistent lock state problem in usbcore (the one that shows up when an HCD is unloaded) comes down to two inter-related problems: usb_rh_urb_dequeue() isn't set up to be called with interrupts disabled. hcd_endpoint_disable() doesn't wait for all URBs on the endpoint's queue to complete. The two problems are related because the one type of URB that isn't likely to be complete when hcd_endpoint_disable() returns is a root-hub URB. Right now usb_rh_urb_dequeue() waits for them to complete, and it assumes interrupts are enabled so it can wait. But hcd_endpoint_disable() calls it with interrupts disabled. Now, it should be legal to unlink root-hub URBs with interrupts disabled. The solution is to move the waiting into hcd_endpoint_disable(), where it belongs. This patch (as754) does that. It turns out to be completely safe to replace the del_timer_sync() with a simple del_timer(). It doesn't matter if the timer routine is running; hcd_root_hub_lock will synchronize the two threads and the status URB will complete with an unlink error, as it should. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
The UHCI controller in my laptop takes longer to turn off the Resume-Detect bit than the 4 us allowed by uhci-hcd. Presumably other computers will have the same problem. This patch (as752) increases the maximum delay to 10 us, which should be plenty, and uses polling to avoid penalizing systems which can turn the bit off more quickly. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Aleksey Gorelov 提交于
If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: NAleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Milan Svoboda 提交于
I spotted this during my tests with -rt on arm. The -rt patch contains some better tools to diagnose problems with locks and some other things... Original code tries to take semaphore in BUG_ON and then free the memory with this semaphore. Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Milan Svoboda 提交于
Add poll() support to gadgetfs ep0 Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 dave rientjes 提交于
The size of struct nc_trailer is inherently the newtailroom pad. Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-