- 18 10月, 2006 40 次提交
-
-
由 Ben Collins 提交于
Signed-off-by: NBen Collins <ben.collins@ubuntu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
For Hummingbird PCI controllers, we should create the root PCI memory space resource as the full 4GB area, and then allocate the IOMMU DMA translation window out of there. The old code just assumed that the IOMMU DMA translation base to the top of the 4GB area was unusable. This is not true on many systems such as SB100 and SB150, where the IOMMU DMA translation window sits at 0xc0000000->0xdfffffff. So what would happen is that any device mapped by the firmware at the top section 0xe0000000->0xffffffff would get remapped by Linux somewhere else leading to all kinds of problems and boot failures. While we're here, report more cases of OBP resource assignment conflicts. The only truly valid ones are ROM resource conflicts. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Unused, but still allow the '-s' boot option to be passed down to init. Based upon patches by Martin Habets. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
It would fail the compile due to the newly added error checking testing a bad macro for a "return value" unless USB_GADGET_DEBUG_FILES was enabled. Pointed out by Stephen Hemminger. Acked-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (47 commits) USB: Add device id for Sierra Wireless MC8755 USB: cleanup sierra wireless driver a bit USB: Sierra Wireless driver update USB: ftdi_sio whitespace fixes USB-SERIAL:cp2101 Add new device ID USB/gadget/net2280: handle sysfs errors usbtouchscreen: fix data reading for ITM touchscreens UEAGLE: fix ueagle-atm Oops USB: xpad: dance pad support USB: input: extract() and implement() are bit field manipulation routines USB: Memory leak in drivers/usb/serial/airprime.c USB Storage: unusual_devs.h entry for Sony Ericsson P990i USB: fix usbatm tiny race USB: unusual_devs entry for Nokia 6234 USB: mos7840.c: fix a check-after-dereference USB: ftdi-elan.c: remove dead code USB: Mitsumi USB FDD 061M: UNUSUAL_DEV multilun fix USB: fix dereference in drivers/usb/misc/adutux.c USB: add USB serial mos7720 driver USB: move trancevibrator.c to the proper usb directory ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Use mmiowb after doorbell ring IB/ipath: Initialize diagpkt file on device init only RDMA/amso1100: Fix a NULL dereference in error path RDMA/amso1100: pci_module_init() conversion
-
由 Jan Luebbe 提交于
Adds the device id used by the UMTS cards in Lenovo X60s notebooks sold in Europe. Signed-off-by: NJan Luebbe <jluebbe@lasnet.de> Cc: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This saves over 30 lines and fixes a warning from sparse and allows debugging to work dynamically like all other usb-serial drivers. Cc: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kevin Lloyd 提交于
The largest feature in this patch is that it adds significant throughput increase to the Sierra driver and adds support for modem status line control (e.g. the DTR line). This patch also updates the current sierra.c driver so that it supports both 3-port Sierra devices and 1-port legacy devices and removes Sierra's references in other related files (Kconfig and airprime.c). Signed-off-by: NKevin Lloyd <linux@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Whitespace fixups for drivers/usb/serial/ftdi_sio.c ... removing end-of-line whitespace, and space-before-tab. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Craig Shelley 提交于
This patch adds device ID 0xEA61. This is another factory default ID used by SILabs. Signed-off-by: NCraig Shelley <craig@microtron.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Ritz 提交于
ITM devices seem to report only garbage when not touched. update usbtouchscreen to do data reading like itmtouch. also fix wrong mask on pressure bits. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 matthieu castet 提交于
The array of attribute passed to sysfs_create_group() must be NULL-terminated. The sysfs entries are created before the start of the modem state machine to avoid to stop it in case of errors in sysfs creation. Also {destroy,create}_fs_entries are removed as they do nothing. Signed-off-by: NLaurent Riffard <laurent.riffard@free.fr> Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dominic Cerquetti 提交于
Adds support for dance pads to the xpad driver. Dance pads require the d-pad to be mapped to four buttons instead of two axes, so that combinations of up/down and left/right can be hit simultaneously. Known dance pads are detected, and there is a module parameter added to default unknown xpad devices to map the d-pad to buttons if this is desired. (dpad_to_buttons). Minor modifications were made to port the changes in the original patch to a newer kernel version. This patch was originally from Dominic Cerquetti originally written for kernel 2.6.11.4, with minor modifications (API changes for USB, spelling fixes to the documentation added in the original patch) made to apply to the current kernel. I have modified Dominic's original patch per some suggestions from Dmitry Torokhov. (There was nothing in the patch format description about multiple From: lines, so I haven't added myself.) [akpm@osdl.org: cleanups] Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Grant Grundler 提交于
extract() and implement() have brain damaged attempts to handle 32-bit wide "fields". The problem is the index math in the original code didn't clear all the relevant bits. (offset >> 5) only compensated for 32-bit index. We need (offset >> 6) if we want to use 64-bit loads. But it was also wrong in that it tried to use quasi-aligned loads. Ie "report" was only incremented in multiples of 4 bytes and then the offset was masked off for values greater than 4 bytes. The right way is to pretend "report" points at a byte array. And offset is then only minor adjustment for < 8 bits of offset. "n" (field width) can then be as big as 24 (assuming 32-bit loads) since "offset" will never be bigger than 7. If someone needs either function to handle more than 24-bits, please document why - point at a specification or specific USB hid device - in comments in the code. extract/implement() are also an eyesore to read. Please banish whoever wrote it to read CodingStyle 3 times in a row to a classroom full of 1st graders armed with rubberbands. Or just flame them. Whatever. Globbing all the code together on two lines does NOT make it faster and is Just Wrong. I've tested this patch on j6000 (dual 750Mhz PA-RISC, 32-bit 2.6.12-rc5). Kyle McMartin tested on c3000 (up 400Mhz PA-RISC, same kernel). "p2-mate" (Peter De Schrijver?) tested on sb1250 (dual core Mips, broadcom "swarm" eval board). Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric Sesterhenn 提交于
the commit http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=5dda171202f94127e49c12daf780cdae1b4e668b added a memory leak. In case we cant allocate an urb, we dont free the buffer and leak it. Coverity id #1438 Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Acked-by: NAndy Gay <andy@andynet.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jan Mate 提交于
USB Storage: this patch adds support for Sony Ericsson P990i Signed-off-by: NJan Mate <mate@fiit.stuba.sk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
ia64: drivers/usb/atm/usbatm.c: In function `usbatm_do_heavy_init': drivers/usb/atm/usbatm.c:1004: warning: implicit declaration of function `get_current' drivers/usb/atm/usbatm.c:1004: error: invalid type argument of `->' Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as803) adds an unusual_devs entry for the Nokia 6234 mobile phone. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch fixes an obvious check-after-dereference spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
The Coverity checker spotted this obviously dead code. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tobias Lorenz 提交于
From: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Eric Sesterhenn 提交于
in two of the error cases, dev is still NULL, and we dereference it. Spotted by coverity (cid#1428, 1429) Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Add support for Moschip 7720 USB dual port usb to serial device. This driver is originally based on the drivers/usb/io_edgeport.c driver. Cleaned up and forward ported by me. Cc: VijayaKumar <vijaykumar@aspirecom.net> Cc: AjayKumar <ajay@aspirecom.net> Cc: Gurudeva <gurudev@aspirecom.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
It's not a input driver, so it doesn't belong in the input directory. Cc: Sam Hocevar <sam@zoy.org> Cc: Dmitry Torokhov <dtor@insightbb.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arnd Bergmann 提交于
When working on the mcs7830, I noticed the need for a mutex in its mdio_read/mdio_write functions. A related problem seems to be present in the asix driver in the respective functions. This introduces a mutex in the common usbnet driver and uses it from the two hardware specific drivers. Acked-by: NDavid Hollis <dhollis@davehollis.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arnd Bergmann 提交于
This adds generic support for the ethtool commands get_settings, set_settings, get_link and nway_reset to usbnet. These are now implemented using mii functions when a low-level driver supports mdio_read/mdio_write and does not override the usbnet ethtool commands with its own. Currently, this applies to the asix and the mcs7830 drivers. I have tested it on mcs7830. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NDavid Hollis <dhollis@davehollis.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arnd Bergmann 提交于
This driver adds support for the DeLOCK USB ethernet adapter and potentially others based on the MosChip MCS7830 chip. It is based on the usbnet and asix drivers as well as the original device driver provided by MosChip, which in turn was based on the usbnet driver. It has been tested successfully on an OHCI, but interestingly there seems to be a problem with the mcs7830 when connected to the ICH6/EHCI in my thinkpad: it keeps receiving lots of broken packets in the RX interrupt. The problem goes away when I'm using an active USB hub, so I assume it's not related to the device driver, but rather to the hardware. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Akinobu Mita 提交于
This patch adds missing class_device_create() error check, and makes notifier return NOTIFY_BAD. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as800) straightens out the USB endpoint class device creation routine, fixing a refcount bug in the process. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as799) fixes a nasty refcount error in the USB endpoint class. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] switch to new pci_get_bus_and_slot API [ARM] Update mach-types [ARM] Fix Zaurii keyboard/touchscreen drivers [ARM] Fix fallout from IRQ regs changes [ARM] 3890/1: [Jornada7xx] Addition of MCU commands into jornada720.h [ARM] 3889/1: [Jornada7xx] Addition of correct SDRAM params into cpu-sa1110.c [ARM] 3888/1: add pxa27x SSP FSRT register bit definition
-
由 Alan Stern 提交于
This patch (as798) adds a workaround to uhci-hcd. At least one Asus motherboard is wired in such a way that any device attached to a suspended UHCI controller will prevent the system from entering suspend-to-RAM by immediately waking it up. The only way around the problem is to turn the controller off instead of suspending it. This fixes Bugzilla #6193. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Deleted some unused code that could do bad things on non-x86 platforms. Also fixed some minor formatting errors. Thanks to Al Viro for pointing out the sparse errors. Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this implements suspend support for usblp. According to the CUPS people ENODEV will make CUPS retry the job. Thus it is returned in the runtime case. My printer survives suspend/resume cycles with it. Signed-off-by: NOliver Neukum <oliver@neukum.name> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Duncan Sands 提交于
From http://doc.ubuntu-fr.org/materiel/zxdsl852. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Duncan Sands 提交于
The speedtouch modem setup code was reverse engineered many years ago from a prehistoric windows driver. Less ancient windows drivers, even those from a few years ago, perform extra initialization steps which this patch adds to the linux driver. David Woodhouse observed that this initialization along with the firmware bin/sachu3/zzzlp2.eni from the driver at http://www.speedtouch.co.uk/downloads/330/301/UK3012%20Extended.zip improves line sync speeds by about 20%. He provided the original patch, which I've modified to use symbolic names (BMaxDSL, ModemMode, ModemOption) rather than magic numbers. These names may not seem like much of an improvement (after all, what is "ModemOption" exactly?), but they do have one big advantage: they are the names used in the windows registry. I've made them available as module parameters. Thanks are due to Aurelio Arroyo, who noticed the relationship between these magic numbers and the entries in Phonebook.ini. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Duncan Sands 提交于
If usbatm_do_heavy_init finishes before usbatm_heavy_init writes the pid, the disconnect method could shoot down the wrong process if the pid has been recycled. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-