- 21 11月, 2013 9 次提交
-
-
由 Madalin Bucur 提交于
Add auto-MDI/MDI-X capability for forced (autonegotiation disabled) 10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static function genphy_setup_forced() required by the new config_aneg handler in the Vitesse PHY module. Signed-off-by: NMadalin Bucur <madalin.bucur@freescale.com> Signed-off-by: NShruti Kanetkar <Shruti@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sandeep Singh 提交于
Vitesse VSC8662 is Dual Port 10/100/1000Base-T Phy Its register set and features are similar to other Vitesse Phys. Signed-off-by: NSandeep Singh <Sandeep@freescale.com> Signed-off-by: NAndy Fleming <afleming@gmail.com> Signed-off-by: NShruti Kanetkar <Shruti@Freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 shaohui xie 提交于
The VSC8574 is a quad-port Gigabit Ethernet transceiver with four SerDes interfaces for quad-port dual media capability. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: NAndy Fleming <afleming@gmail.com> Signed-off-by: NShruti Kanetkar <Shruti@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Fleming 提交于
Vitesse VSC8234 is quad port 10/100/1000BASE-T PHY with SGMII and SERDES MAC interfaces. Signed-off-by: NAndy Fleming <afleming@gmail.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NShruti Kanetkar <Shruti@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
The data from the hardware should be little endian. Correct the declaration. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
The maximum packet number which a tx aggregation buffer could contain is the tx_qlen. tx_qlen = buffer size / (packet size + descriptor size). If the tx buffer is empty and the queued packets are more than the maximum value which is defined above, stop the tx queue. Wake the tx queue if tx queue is stopped and the queued packets are less than tx_qlen. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Remove the code for sending the packet in the rtl8152_start_xmit(). Let rtl8152_start_xmit() to queue the packet only, and schedule a tasklet to send the queued packets. This simplify the code and make sure all the packet would be sent by the original order. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
The tx/rx would access the memory which is out of the desired range. Modify the method of checking the end of the memory to avoid it. For r8152_tx_agg_fill(), the variable remain may become negative. However, the declaration is unsigned, so the while loop wouldn't break when reaching the end of the desied memory. Although to change the declaration from unsigned to signed is enough to fix it, I also modify the checking method for safe. Replace remain = rx_buf_sz - sizeof(*tx_desc) - (u32)((void *)tx_data - agg->head); with remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head); to make sure the variable remain is always positive. Then, the overflow wouldn't happen. For rx_bottom(), the rx_desc should not be used to calculate the packet length before making sure the rx_desc is in the desired range. Change the checking to two parts. First, check the descriptor is in the memory. The other, using the descriptor to find out the packet length and check if the packet is in the memory. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2013 3 次提交
-
-
由 Johannes Berg 提交于
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
As suggested by David Miller, make genl_register_family_with_ops() a macro and pass only the array, evaluating ARRAY_SIZE() in the macro, this is a little safer. The openvswitch has some indirection, assing ops/n_ops directly in that code. This might ultimately just assign the pointers in the family initializations, saving the struct genl_family_and_ops and code (once mcast groups are handled differently.) Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2013 9 次提交
-
-
由 Ajit Khaparde 提交于
Secondary unicast MAC addresses will get deleted only when the interface is UP. When the interface is DOWN, though these secondary MAC addresses are unusable and awaiting to be deleted, cause the firmware to believe that they are being used. If the user intends to set a MAC address as primary MAC from one of these secondary MAC addresses, the firmware returns a MAC address Collision error. Delete these secondary MAC addresses during be_close. The secondary MAC addresses list will be refreshed during interface open anyway. Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
The driver currently requests the firmware to enable rx_interface options without considering if the interface was created with that capability. This could cause commands to firmware to fail. To avoid this, enable only those options on an interface if the interface was created with that capability. Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhi Yong Wu 提交于
It is more appropriate to use # of queue pairs currently used by the driver instead of a magic value. Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Current driver release rtnl lock in between DCB re-configuration. As a result, other flows (e.g., mtu config) may enter in between and fail due to halted tx path for dcb configuration. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
During VF load, prior to sending messages on HW channel to PF the VF checks its bulletin board to see whether the PF indicated it has closed; If a closed PF is encountered, the VF skips sending the message. Due to incorrect return values, there's a possible scenario in which the VF finishes loading "successfully", while the PF hasn't actually fully configured FW/HW for the VFs supposed configuration. Once VF tries to send Tx packets, HW will raise an attention (and FW possibly will start treat the VF as malicious). The patch fails the loading process in such a scenario. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
If chip enters a recovery flow just after the driver issues a DMAE request the DMAE will timeout. Current code will cause a bnx2x_panic() as a result, which means interface will no longer be usable (regardless of the recovery results), as bnx2x_panic() is irreversible for the driver. As this is a possible flow, the panic should be reached only when driver is compiled with STOP_ON_ERROR. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
While unloading, bnx2x needs to clean the sp_rtnl_state to prevent configuration made before the unload to be applied afterwards with stale values. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geyslan G. Bem 提交于
Free temporary 'chanspecs' avoiding leakage. Signed-off-by: NGeyslan G. Bem <geyslan@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ma JieYue 提交于
There was a bug in xennet_alloc_rx_buffers, when allocating page or sk_buff failed, and at the same time rx_batch queue not empty, the rx_refill_timer timer won't be scheduled. If finally the remaining request buffers in rx ring less than what backend driver expected, the backend driver would think of rx ring as full and start dropping packets. In such situation, there is no way for the netfront driver to recover automatically, so that the device can not work properly. The patch fixes the problem by always scheduling rx_refill_timer timer when alloc_page or __netdev_alloc_skb fails, no matter whether rx_batch queue is empty or not. It ensures that the rx ring request buffers will finally meet the backend needs. Signed-off-by: NMa JieYue <jieyue.majy@alibaba-inc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2013 14 次提交
-
-
由 Daniel Mack 提交于
During resume, use for_each_slave to walk the slaves of the cpsw, and soft-reset each of them. This prevents oopses if there is only one slave configured. Signed-off-by: NDaniel Mack <zonque@gmail.com> Acked-by: NMugunthan V N <mugunthanvnm@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Weidong 提交于
I met a Bug when I add ip target with the wrong ip address: echo +500.500.500.500 > /sys/class/net/bond0/bonding/arp_ip_target the wrong ip address will transfor to 245.245.245.244 and add to the ip target success, it is uncorrect, so I add checks to avoid adding wrong address. The in4_pton() will set wrong ip address to 0.0.0.0, it will return by the next check and will not add to ip target. v2 According Veaceslav's opinion, simplify the code. v3 According Veaceslav's opinion, add broadcast check and make a micro definition to package it. v4 Solve the problem of the format which David point out. Suggested-by: NVeaceslav Falico <vfalico@redhat.com> Suggested-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eli Cohen 提交于
For archs with pages size of 4K, when the chunk is freed, fwp is not in the list so avoid attempting to delete it. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Larry Finger 提交于
This driver uses a number of macros to get and set various fields in the RX and TX descriptors. To work correctly, a u8 pointer to the descriptor must be used; however, in some cases a descriptor structure pointer is used instead. In addition, a duplicated statement is removed. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Reported-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ujjal Roy 提交于
1) After driver load failure, clear 'card->adapter' instead of card pointer so that card specific cleanup is performed later when user unloads the driver. 2) Clear usb_card pointer in disconnect handler to avoid invalid memory access when user unloads the driver after removing the card. Signed-off-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
When driver is failed to load, card pointer doesn't get freed. We will free it in cleanup handler which is called in failure as well as unload path. Also, update drvdata in init/cleanup handlers instead of register/unregister handlers. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
1) Currently we freeing wdev for each interface in driver unload path. We may leak memory if user have already deleted an interface. mwifiex_add_virtual_intf() allocates wdev structure. So it should be freed in mwifiex_del_virtual_intf(). This will make sure that wdev will be freed when user deletes an interface and also in unload path. 2) "priv->netdev->ieee80211_ptr" should also be cleared in mwifiex_del_virtual_intf. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
We don't need to free/unregister wiphy when mwifiex_register_cfg80211() fails. The routine internally takes care of it. This redundant code can cause NULL pointer dereference, for adapter->wiphy. Reported-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
1) If register_netdevice() is failed, we are freeing netdev pointer, but priv->netdev is not cleared. This gives kernel paging request error when driver is unloaded or interface is deleted. Fix the problem by clearing the pointer. 2) Fix memory leak issue by freeing 'wdev' in failure paths. Also, clear priv->wdev pointer. As mwifiex_add_virtual_intf() successfully handles the failure conditions, redundant code under err_add_intf label is removed in this patch. Reported-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
mwifiex_add_virtual_intf() returns ERR_PTR values. So use IS_ERR() macro instead of checking for NULL pointer. Reported-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Commit "rt2x00: fix HT TX descriptor settings regression" assumes that the control parameter to rt2x00mac_tx is always non-NULL. There is an internal call in rt2x00lib_bc_buffer_iter where NULL is passed. Fix the resulting crash by adding an initialized dummy on-stack ieee80211_tx_control struct. Cc: stable@vger.kernel.org # 3.7+ Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
On some boards which are based on AR9300, AR9580 or AR9550, MCS15 usage is problematic. This is because these boards use a "frequency doubler", which doubles the refclk to get better EVM, but causes spurs. Handle this properly in the driver to recover throughput. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
A world regulatory domain check was in place that prevents user dynamic regulatory hints from being processed. This was there for historical reasons as this was only possible previously for world roaming cards and dynamic regulatory settings was only possible for country IEs. Fix this by enforcing the world regulatory domain check only for when the initiator is a country IE. Support for dynamic user regulatory support is already checked. Signed-off-by: NLuis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 15 11月, 2013 5 次提交
-
-
由 Stefani Seibold 提交于
This patch enhances the type safety for the kfifo API. It is now safe to put const data into a non const FIFO and the API will now generate a compiler warning when reading from the fifo where the destination address is pointing to a const variable. As a side effect the kfifo_put() does now expect the value of an element instead a pointer to the element. This was suggested Russell King. It make the handling of the kfifo_put easier since there is no need to create a helper variable for getting the address of a pointer or to pass integers of different sizes. IMHO the API break is okay, since there are currently only six users of kfifo_put(). The code is also cleaner by kicking out the "if (0)" expressions. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NStefani Seibold <stefani@seibold.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wolfram Sang 提交于
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Dalton 提交于
Commit 2613af0e ("virtio_net: migrate mergeable rx buffers to page frag allocators") changed the mergeable receive buffer size from PAGE_SIZE to MTU-size. However, the merge buffer size does not take into account the size of the virtio-net header. Consequently, packets that are MTU-size will take two buffers intead of one (to store the virtio-net header), substantially decreasing the throughput of MTU-size traffic due to TCP window / SKB truesize effects. This commit changes the mergeable buffer size to include the virtio-net header. The buffer size is cacheline-aligned because skb_page_frag_refill will not automatically align the requested size. Benchmarks taken from an average of 5 netperf 30-second TCP_STREAM runs between two QEMU VMs on a single physical machine. Each VM has two VCPUs and vhost enabled. All VMs and vhost threads run in a single 4 CPU cgroup cpuset, using cgroups to ensure that other processes in the system will not be scheduled on the benchmark CPUs. Transmit offloads and mergeable receive buffers are enabled, but guest_tso4 / guest_csum are explicitly disabled to force MTU-sized packets on the receiver. next-net trunk before 2613af0e (PAGE_SIZE buf): 3861.08Gb/s net-next trunk (MTU 1500- packet uses two buf due to size bug): 4076.62Gb/s net-next trunk (MTU 1480- packet fits in one buf): 6301.34Gb/s net-next trunk w/ size fix (MTU 1500 - packet fits in one buf): 6445.44Gb/s Suggested-by: NEric Northup <digitaleric@google.com> Signed-off-by: NMichael Dalton <mwdalton@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hahnjo 提交于
This fixes bug 62491 (https://bugzilla.kernel.org/show_bug.cgi?id=62491). After resuming some users got the following error flooding the kernel log: alx 0000:02:00.0: invalid PHY speed/duplex: 0xffff Signed-off-by: NJonas Hahnfeld <linux@hahnjo.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Now that genl_ops are no longer modified in place when registering, they can be made const. This patch was done mostly with spatch: @@ identifier ops; @@ +const struct genl_ops ops[] = { ... }; (except the struct thing in net/openvswitch/datapath.c) Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-