- 23 12月, 2011 9 次提交
-
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md/bitmap: It is OK to clear bits during recovery. md: don't give up looking for spares on first failure-to-add md/raid5: ensure correct assessment of drives during degraded reshape. md/linear: fix hot-add of devices to linear arrays.
-
由 NeilBrown 提交于
commit d0a4bb49 introduced a regression which is annoying but fairly harmless. When writing to an array that is undergoing recovery (a spare in being integrated into the array), writing to the array will set bits in the bitmap, but they will not be cleared when the write completes. For bits covering areas that have not been recovered yet this is not a problem as the recovery will clear the bits. However bits set in already-recovered region will stay set and never be cleared. This doesn't risk data integrity. The only negatives are: - next time there is a crash, more resyncing than necessary will be done. - the bitmap doesn't look clean, which is confusing. While an array is recovering we don't want to update the 'events_cleared' setting in the bitmap but we do still want to clear bits that have very recently been set - providing they were written to the recovering device. So split those two needs - which previously both depended on 'success' and always clear the bit of the write went to all devices. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Before performing a recovery we try to remove any spares that might not be working, then add any that might have become relevant. Currently we abort on the first spare that cannot be added. This is a false optimisation. It is conceivable that - depending on rules in the personality - a subsequent spare might be accepted. Also the loop does other things like count the available spares and reset the 'recovery_offset' value. If we abort early these might not happen properly. So remove the early abort. In particular if you have an array what is undergoing recovery and which has extra spares, then the recovery may not restart after as reboot as the could of 'spares' might end up as zero. Reported-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
While reshaping a degraded array (as when reshaping a RAID0 by first converting it to a degraded RAID4) we currently get confused about which devices are in_sync. In most cases we get it right, but in the region that is being reshaped we need to treat non-failed devices as in-sync when we have the data but haven't actually written it out yet. Reported-by: NAdam Kwolek <adam.kwolek@intel.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
commit d70ed2e4 broke hot-add to a linear array. After that commit, metadata if not written to devices until they have been fully integrated into the array as determined by saved_raid_disk. That patch arranged to clear that field after a recovery completed. However for linear arrays, there is no recovery - the integration is instantaneous. So we need to explicitly clear the saved_raid_disk field. Signed-off-by: NNeilBrown <neilb@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: Fix usb/isp1760 build on sparc usb: gadget: epautoconf: do not change number of streams usb: dwc3: core: fix cached revision on our structure usb: musb: fix reset issue with full speed device
-
git://github.com/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: pata_of_platform: Add missing CONFIG_OF_IRQ dependency.
-
由 David Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 12月, 2011 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Add a flow_cache_flush_deferred function ipv4: reintroduce route cache garbage collector net: have ipconfig not wait if no dev is available sctp: Do not account for sizeof(struct sk_buff) in estimated rwnd asix: new device id davinci-cpdma: fix locking issue in cpdma_chan_stop sctp: fix incorrect overflow check on autoclose r8169: fix Config2 MSIEnable bit setting. llc: llc_cmsg_rcv was getting called after sk_eat_skb. net: bpf_jit: fix an off-one bug in x86_64 cond jump target iwlwifi: update SCD BC table for all SCD queues Revert "Bluetooth: Revert: Fix L2CAP connection establishment" Bluetooth: Clear RFCOMM session timer when disconnecting last channel Bluetooth: Prevent uninitialized data access in L2CAP configuration iwlwifi: allow to switch to HT40 if not associated iwlwifi: tx_sync only on PAN context mwifiex: avoid double list_del in command cancel path ath9k: fix max phy rate at rate control init nfc: signedness bug in __nci_request() iwlwifi: do not set the sequence control bit is not needed
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: atmel/ac97c: using software reset instead hardware reset if not available
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Include linux/io.h to jz4740-adc mfd: Use request_threaded_irq for twl4030-irq instead of irq_set_chained_handler mfd: Base interrupt for twl4030-irq must be one-shot mfd: Handle tps65910 clear-mask correctly mfd: add #ifdef CONFIG_DEBUG_FS guard for ab8500_debug_resources mfd: Fix twl-core oops while calling twl_i2c_* for unbound driver mfd: include linux/module.h for ab5500-debugfs mfd: Update wm8994 active device checks for WM1811 mfd: Set tps6586x bits if new value is different from the old one mfd: Set da903x bits if new value is different from the old one mfd: Set adp5520 bits if new value is different from the old one mfd: Add missed free_irq in da903x_remove
-
由 Dave Kleikamp 提交于
lockdep reports a deadlock in jfs because a special inode's rw semaphore is taken recursively. The mapping's gfp mask is GFP_NOFS, but is not used when __read_cache_page() calls add_to_page_cache_lru(). Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com> Acked-by: NHugh Dickins <hughd@google.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb由 Greg Kroah-Hartman 提交于
* 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: gadget: epautoconf: do not change number of streams usb: dwc3: core: fix cached revision on our structure usb: musb: fix reset issue with full speed device
-
由 David Miller 提交于
This commit: commit 8f5d6215 Author: Joachim Foerster <joachim.foerster@missinglinkelectronics.com> Date: Mon Oct 10 18:06:54 2011 +0200 usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF . To be able to use the driver on other OF-aware architectures, too. And add necessary OF related #includes to fix compilation error. Signed-off-by: NJoachim Foerster <joachim.foerster@missinglinkelectronics.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> enabled the build on all CONFIG_OF architectures, but it cannot do this. This driver depends upon CONFIG_OF_IRQ but not all CONFIG_OF platforms support that infrastructure, in particular Sparc does not so the build fails. Please push a patch like the following to Linus so that this code only gets built where it actually should. -------------------- usb/isp1760: Add missing CONFIG_OF_IRQ dependency on OF code. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Steffen Klassert 提交于
flow_cach_flush() might sleep but can be called from atomic context via the xfrm garbage collector. So add a flow_cache_flush_deferred() function and use this if the xfrm garbage colector is invoked from within the packet path. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Acked-by: NTimo Teräs <timo.teras@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Commit 2c8cec5c (ipv4: Cache learned PMTU information in inetpeer) removed IP route cache garbage collector a bit too soon, as this gc was responsible for expired routes cleanup, releasing their neighbour reference. As pointed out by Robert Gladewitz, recent kernels can fill and exhaust their neighbour cache. Reintroduce the garbage collection, since we'll have to wait our neighbour lookups become refcount-less to not depend on this stuff. Reported-by: NRobert Gladewitz <gladewitz@gmx.de> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
- 21 12月, 2011 22 次提交
-
-
由 Ben Hutchings 提交于
David and I are sharing maintenance of this repository. Patches should be sent to both of us. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: mtd: plat_ram: call mtd_device_register only if partition data exists mtd: pxa2xx-flash.c: It used to fall back to provided table. mtd: gpmi: add missing include 'module.h' mtd: ndfc: fix typo in structure dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: vub300: fix type of firmware_rom_wait_states module parameter Revert "mmc: enable runtime PM by default" mmc: sdhci: remove "state" argument from sdhci_suspend_host
-
由 David Howells 提交于
Fix the following bug in sel_netport_insert() where rcu_dereference() should be rcu_dereference_protected() as sel_netport_lock is held. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- security/selinux/netport.c:127 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by ossec-rootcheck/3323: #0: (sel_netport_lock){+.....}, at: [<ffffffff8117d775>] sel_netport_sid+0xbb/0x226 stack backtrace: Pid: 3323, comm: ossec-rootcheck Not tainted 3.1.0-rc8-fsdevel+ #1095 Call Trace: [<ffffffff8105cfb7>] lockdep_rcu_dereference+0xa7/0xb0 [<ffffffff8117d871>] sel_netport_sid+0x1b7/0x226 [<ffffffff8117d6ba>] ? sel_netport_avc_callback+0xbc/0xbc [<ffffffff8117556c>] selinux_socket_bind+0x115/0x230 [<ffffffff810a5388>] ? might_fault+0x4e/0x9e [<ffffffff810a53d1>] ? might_fault+0x97/0x9e [<ffffffff81171cf4>] security_socket_bind+0x11/0x13 [<ffffffff812ba967>] sys_bind+0x56/0x95 [<ffffffff81380dac>] ? sysret_check+0x27/0x62 [<ffffffff8105b767>] ? trace_hardirqs_on_caller+0x11e/0x155 [<ffffffff81076fcd>] ? audit_syscall_entry+0x17b/0x1ae [<ffffffff811b5eae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81380d7b>] system_call_fastpath+0x16/0x1b Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NPaul Moore <paul@paul-moore.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: stable@kernel.org Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 James Morris 提交于
Merge branch 'evm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kasatkin/linux-digsig into for-linus
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
* 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroups: fix a css_set not found bug in cgroup_attach_proc
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/clocksource: Fix kernel-doc warnings rtc: m41t80: Workaround broken alarm functionality rtc: Expire alarms after the time is set.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
-
由 Linus Torvalds 提交于
Merge branch 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
-
git://github.com/pmundt/linux-sh由 Linus Torvalds 提交于
* 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh: sh: fix build warning in board-sh7757lcr
-
git://github.com/pmundt/linux-sh由 Linus Torvalds 提交于
* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh: ARM: mach-shmobile: SH73A0 external Ethernet fix ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix ARM: mach-shmobile: Kota2 TPU LED platform data ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix ARM: mach-shmobile: Kota2 PINT fix
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix a regression in nfs_file_llseek() NFSv4: Do not accept delegated opens when a delegation recall is in effect NFSv4: Ensure correct locking when accessing the 'lock_states' list NFSv4.1: Ensure that we handle _all_ SEQUENCE status bits. NFSv4: Don't error if we handled it in nfs4_recovery_handle_error SUNRPC: Ensure we always bump the backlog queue in xprt_free_slot SUNRPC: Fix the execution time statistics in the face of RPC restarts
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: vmwgfx: Clip cliprects against screen boundaries in present and dirty vmwgfx: Resend the cursor after legacy modeset vmwgfx: Do better culling of presents vmwgfx: Refactor kms code to use vmw_user_lookup_handle helper vmwgfx: Add helper function to get surface or dmabuf vmwgfx: Refactor cursor update vmwgfx: Remove dmabuf check in present ioctl vmwgfx: Use the revised fifo hw version register when present
-
由 Gerlando Falauto 提交于
previous commit 3fb72f1e makes IP-Config wait for carrier on at least one network device. Before waiting (predefined value 120s), check that at least one device was successfully brought up. Otherwise (e.g. buggy bootloader which does not set the MAC address) there is no point in waiting for carrier. Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
When checking whether a DATA chunk fits into the estimated rwnd a full sizeof(struct sk_buff) is added to the needed chunk size. This quickly exhausts the available rwnd space and leads to packets being sent which are much below the PMTU limit. This can lead to much worse performance. The reason for this behaviour was to avoid putting too much memory pressure on the receiver. The concept is not completely irational because a Linux receiver does in fact clone an skb for each DATA chunk delivered. However, Linux also reserves half the available socket buffer space for data structures therefore usage of it is already accounted for. When proposing to change this the last time it was noted that this behaviour was introduced to solve a performance issue caused by rwnd overusage in combination with small DATA chunks. Trying to reproduce this I found that with the sk_buff overhead removed, the performance would improve significantly unless socket buffer limits are increased. The following numbers have been gathered using a patched iperf supporting SCTP over a live 1 Gbit ethernet network. The -l option was used to limit DATA chunk sizes. The numbers listed are based on the average of 3 test runs each. Default values have been used for sk_(r|w)mem. Chunk Size Unpatched No Overhead ------------------------------------- 4 15.2 Kbit [!] 12.2 Mbit [!] 8 35.8 Kbit [!] 26.0 Mbit [!] 16 95.5 Kbit [!] 54.4 Mbit [!] 32 106.7 Mbit 102.3 Mbit 64 189.2 Mbit 188.3 Mbit 128 331.2 Mbit 334.8 Mbit 256 537.7 Mbit 536.0 Mbit 512 766.9 Mbit 766.6 Mbit 1024 810.1 Mbit 808.6 Mbit Signed-off-by: NThomas Graf <tgraf@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (31 commits) Revert "[media] af9015: limit I2C access to keep FW happy" [media] s5p-fimc: Fix camera input configuration in subdev operations [media] m5mols: Fix logic in sanity check [media] ati_remote: switch to single-byte scancodes [media] V4L: mt9m111: fix uninitialised mutex [media] V4L: omap1_camera: fix missing <linux/module.h> include [media] V4L: mt9t112: use after free in mt9t112_probe() [media] V4L: soc-camera: fix compiler warnings on 64-bit platforms [media] s5p_mfc_enc: fix s/H264/H263/ typo [media] omap_vout: Fix compile error in 3.1 [media] au0828: add missing models 72101, 72201 & 72261 to the model matrix [media] au0828: add missing USB ID 2040:7213 [media] au0828: add missing USB ID 2040:7260 [media] [trivial] omap24xxcam-dma: Fix logical test [media] omap_vout: fix crash if no driver for a display [media] media: video: s5p-tv: fix build break [media] omap3isp: fix compilation of ispvideo.c [media] m5mols: Fix set_fmt to return proper pixel format code [media] s5p-fimc: Use correct fourcc for RGB565 colour format [media] s5p-fimc: Fail driver probing when sensor configuration is wrong ...
-
由 Michel Lespinasse 提交于
binary_sysctl() calls sysctl_getname() which allocates from names_cache slab usin __getname() The matching function to free the name is __putname(), and not putname() which should be used only to match getname() allocations. This is because when auditing is enabled, putname() calls audit_putname *instead* (not in addition) to __putname(). Then, if a syscall is in progress, audit_putname does not release the name - instead, it expects the name to get released when the syscall completes, but that will happen only if audit_getname() was called previously, i.e. if the name was allocated with getname() rather than the naked __getname(). So, __getname() followed by putname() ends up leaking memory. Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Eric Paris <eparis@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kautuk Consul 提交于
Static storage is not required for the struct vmap_area in __get_vm_area_node. Removing "static" to store this variable on the stack instead. Signed-off-by: NKautuk Consul <consul.kautuk@gmail.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Corey Minyard 提交于
If the BMC gets reset, it will return 0x80 response errors. In less than a week # grep "Error 80 on cmd 22" /var/log/kernel |wc -l 378681 In this case, it is probably a good idea to restore the IPMI settings. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Tested-by: NArkadiusz Miśkiewicz <a.miskiewicz@gmail.com> Reported-by: NArkadiusz Miśkiewicz <a.miskiewicz@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Frantisek Hrbata 提交于
An integer overflow will happen on 64bit archs if task's sum of rss, swapents and nr_ptes exceeds (2^31)/1000 value. This was introduced by commit f755a042 oom: use pte pages in OOM score where the oom score computation was divided into several steps and it's no longer computed as one expression in unsigned long(rss, swapents, nr_pte are unsigned long), where the result value assigned to points(int) is in range(1..1000). So there could be an int overflow while computing 176 points *= 1000; and points may have negative value. Meaning the oom score for a mem hog task will be one. 196 if (points <= 0) 197 return 1; For example: [ 3366] 0 3366 35390480 24303939 5 0 0 oom01 Out of memory: Kill process 3366 (oom01) score 1 or sacrifice child Here the oom1 process consumes more than 24303939(rss)*4096~=92GB physical memory, but it's oom score is one. In this situation the mem hog task is skipped and oom killer kills another and most probably innocent task with oom score greater than one. The points variable should be of type long instead of int to prevent the int overflow. Signed-off-by: NFrantisek Hrbata <fhrbata@redhat.com> Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [2.6.36+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hillf Danton 提交于
If the request is to create non-root group and we fail to meet it, we should leave the root unchanged. Signed-off-by: NHillf Danton <dhillf@gmail.com> Acked-by: NHugh Dickins <hughd@google.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: NMichal Hocko <mhocko@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-