- 05 1月, 2019 24 次提交
-
-
由 Davidlohr Bueso 提交于
Upon timeout, we can just exit out of the loop, without the cost of the changing the task's state with an smp_store_mb call. Just exit out of the loop and be done - setting the task state afterwards will be, of course, redundant. [dave@stgolabs.net: forgotten fixlets] Link: http://lkml.kernel.org/r/20181109155258.jxcr4t2pnz6zqct3@linux-r8p5 Link: http://lkml.kernel.org/r/20181108051006.18751-7-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dave@stgolabs.net> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
This patch aims at reducing ep wq.lock hold times in epoll_wait(2). For the blocking case, there is no need to constantly take and drop the spinlock, which is only needed to manipulate the waitqueue. The call to ep_events_available() is now lockless, and only exposed to benign races. Here, if false positive (returns available events and does not see another thread deleting an epi from the list) we call into send_events and then the list's state is correctly seen. Otoh, if a false negative and we don't see a list_add_tail(), for example, from irq callback, then it is rechecked again before blocking, which will see the correct state. In order for more accuracy to see concurrent list_del_init(), use the list_empty_careful() variant -- of course, this won't be safe against insertions from wakeup. For the overflow list we obviously need to prevent load/store tearing as we don't want to see partial values while the ready list is disabled. [dave@stgolabs.net: forgotten fixlets] Link: http://lkml.kernel.org/r/20181109155258.jxcr4t2pnz6zqct3@linux-r8p5 Link: http://lkml.kernel.org/r/20181108051006.18751-6-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de> Suggested-by: NJason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
Insted of just commenting how important it is, lets make it more robust and add a lockdep_assert_held() call. Link: http://lkml.kernel.org/r/20181108051006.18751-5-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
The ep->ovflist is a secondary ready-list to temporarily store events that might occur when doing sproc without holding the ep->wq.lock. This accounts for every time we check for ready events and also send events back to userspace; both callbacks, particularly the latter because of copy_to_user, can account for a non-trivial time. As such, the unlikely() check to see if the pointer is being used, seems both misleading and sub-optimal. In fact, we go to an awful lot of trouble to sync both lists, and populating the ovflist is far from an uncommon scenario. For example, profiling a concurrent epoll_wait(2) benchmark, with CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33% incorrect rate was seen; and when incrementally increasing the number of epoll instances (which is used, for example for multiple queuing load balancing models), up to a 90% incorrect rate was seen. Similarly, by deleting the prediction, 3% throughput boost was seen across incremental threads. Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
The current logic is a bit convoluted. Lets simplify this with a standard list_for_each_entry_safe() loop instead and just break out after maxevents is reached. While at it, remove an unnecessary indentation level in the loop when there are in fact ready events. Link: http://lkml.kernel.org/r/20181108051006.18751-3-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davidlohr Bueso 提交于
Patch series "epoll: some miscellaneous optimizations". The following are some incremental optimizations on some of the epoll core. Each patch has the details, but together, the series is seen to shave off measurable cycles on a number of systems and workloads. For example, on a 40-core IB, a pipetest as well as parallel epoll_wait() benchmark show around a 20-30% increase in raw operations per second when the box is fully occupied (incremental thread counts), and up to 15% performance improvement with lower counts. Passes ltp epoll related testcases. This patch(of 6): All callers pass the EP_MAX_NESTS constant already, so lets simplify this a tad and get rid of the redundant parameter for nested eventpolls. Link: http://lkml.kernel.org/r/20181108051006.18751-2-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
These declarations should generally be static const to avoid poor compilation and runtime performance where compilers tend to initialize the const declaration for every call instead of using .rodata for the string. Miscellanea: - Convert spaces to tabs for indentation in 2 adjacent checks Link: http://lkml.kernel.org/r/10ea5f4b087dc911e41e187a4a2b5e79c7529aa3.camel@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 huang.zijiang 提交于
memblock_alloc() never returns NULL because panic never returns. Link: http://lkml.kernel.org/r/1545640882-42009-1-git-send-email-huang.zijiang@zte.com.cnSigned-off-by: Nhuang.zijiang <huang.zijiang@zte.com.cn> Acked-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Shijie 提交于
Some devices may have big memory on chip, such as over 1G. In some cases, the nbytes maybe bigger then 4M which is the bounday of the memory buddy system (4K default). So use vzalloc_node() to allocate the bitmap. Also use vfree to free it. Link: http://lkml.kernel.org/r/20181225015701.6289-1-sjhuang@iluvatar.aiSigned-off-by: NHuang Shijie <sjhuang@iluvatar.ai> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Alexey Skidanov <alexey.skidanov@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yury Norov 提交于
Contrary to other tests, test_find_next_and_bit() test uses tab formatting in output and get_cycles() instead of ktime_get(). get_cycles() is not supported by some arches, so ktime_get() fits better in generic code. Fix it and minor style issues, so the output looks like this: Start testing find_bit() with random-filled bitmap find_next_bit: 7142816 ns, 163282 iterations find_next_zero_bit: 8545712 ns, 164399 iterations find_last_bit: 6332032 ns, 163282 iterations find_first_bit: 20509424 ns, 16606 iterations find_next_and_bit: 4060016 ns, 73424 iterations Start testing find_bit() with sparse bitmap find_next_bit: 55984 ns, 656 iterations find_next_zero_bit: 19197536 ns, 327025 iterations find_last_bit: 65088 ns, 656 iterations find_first_bit: 5923712 ns, 656 iterations find_next_and_bit: 29088 ns, 1 iterations Link: http://lkml.kernel.org/r/20181123174803.10916-1-ynorov@caviumnetworks.comSigned-off-by: NYury Norov <ynorov@caviumnetworks.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: "Norov, Yuri" <Yuri.Norov@cavium.com> Cc: Clement Courbet <courbet@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Skidanov 提交于
gen_pool_alloc_algo() uses different allocation functions implementing different allocation algorithms. With gen_pool_first_fit_align() allocation function, the returned address should be aligned on the requested boundary. If chunk start address isn't aligned on the requested boundary, the returned address isn't aligned too. The only way to get properly aligned address is to initialize the pool with chunks aligned on the requested boundary. If want to have an ability to allocate buffers aligned on different boundaries (for example, 4K, 1MB, ...), the chunk start address should be aligned on the max possible alignment. This happens because gen_pool_first_fit_align() looks for properly aligned memory block without taking into account the chunk start address alignment. To fix this, we provide chunk start address to gen_pool_first_fit_align() and change its implementation such that it starts looking for properly aligned block with appropriate offset (exactly as is done in CMA). Link: https://lkml.kernel.org/lkml/a170cf65-6884-3592-1de9-4c235888cc8a@intel.com Link: http://lkml.kernel.org/r/1541690953-4623-1-git-send-email-alexey.skidanov@intel.comSigned-off-by: NAlexey Skidanov <alexey.skidanov@intel.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matthew Wilcox 提交于
When testing in userspace, UBSAN pointed out that shifting into the sign bit is undefined behaviour. It doesn't really make sense to ask for the highest set bit of a negative value, so just turn the argument type into an unsigned int. Some architectures (eg ppc) already had it declared as an unsigned int, so I don't expect too many problems. Link: http://lkml.kernel.org/r/20181105221117.31828-1-willy@infradead.orgSigned-off-by: NMatthew Wilcox <willy@infradead.org> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Empty function will be inlined so asmlinkage doesn't do anything. Link: http://lkml.kernel.org/r/20181124093530.GE10969@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NJoey Pabalinas <joeypabalinas@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Souptick Joarder 提交于
Use new return type vm_fault_t for fault handler. Link: http://lkml.kernel.org/r/20181106173628.GA12989@jordon-HP-15-Notebook-PCSigned-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tetsuo Handa 提交于
check_hung_uninterruptible_tasks() is currently calling rcu_lock_break() for every 1024 threads. But check_hung_task() is very slow if printk() was called, and is very fast otherwise. If many threads within some 1024 threads called printk(), the RCU grace period might be extended enough to trigger RCU stall warnings. Therefore, calling rcu_lock_break() for every some fixed jiffies will be safer. Link: http://lkml.kernel.org/r/1544800658-11423-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: NPaul E. McKenney <paulmck@linux.ibm.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Liu, Chuansheng 提交于
Based on commit 401c636a ("kernel/hung_task.c: show all hung tasks before panic"), we could get the call stack of hung task. However, if the console loglevel is not high, we still can not see the useful panic information in practice, and in most cases users don't set console loglevel to high level. This patch is to force console verbose before system panic, so that the real useful information can be seen in the console, instead of being like the following, which doesn't have hung task information. INFO: task init:1 blocked for more than 120 seconds. Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Kernel panic - not syncing: hung_task: blocked tasks CPU: 2 PID: 479 Comm: khungtaskd Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1 Call Trace: dump_stack+0x4f/0x65 panic+0xde/0x231 watchdog+0x290/0x410 kthread+0x12c/0x150 ret_from_fork+0x35/0x40 reboot: panic mode set: p,w Kernel Offset: 0x34000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A6015B675@SHSMSX101.ccr.corp.intel.comSigned-off-by: NChuansheng Liu <chuansheng.liu@intel.com> Reviewed-by: NPetr Mladek <pmladek@suse.com> Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masahiro Yamada 提交于
The introduction of these dummy BUILD_BUG_ON stubs dates back to commmit 903c0c7c ("sparse: define dummy BUILD_BUG_ON definition for sparse"). At that time, BUILD_BUG_ON() was implemented with the negative array trick *and* the link-time trick, like this: extern int __build_bug_on_failed; #define BUILD_BUG_ON(condition) \ do { \ ((void)sizeof(char[1 - 2*!!(condition)])); \ if (condition) __build_bug_on_failed = 1; \ } while(0) Sparse is more strict about the negative array trick than GCC because Sparse requires the array length to be really constant. Here is the simple test code for the macro above: static const int x = 0; BUILD_BUG_ON(x); GCC is absolutely fine with it (-Wvla was enabled only very recently), but Sparse warns like this: error: bad constant expression error: cannot size expression (If you are using a newer version of Sparse, you will see a different warning message, "warning: Variable length array is used".) Anyway, Sparse was producing many false positives, and noisier than it should be at that time. With the previous commit, the leftover negative array trick is gone. Sparse is fine with the current BUILD_BUG_ON(), which is implemented by using the 'error' attribute. I am keeping the stub for BUILD_BUG_ON_ZERO(). Otherwise, Sparse would complain about the following code, which GCC is fine with: static const int x = 0; int y = BUILD_BUG_ON_ZERO(x); Link: http://lkml.kernel.org/r/1542856462-18836-3-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NKees Cook <keescook@chromium.org> Reviewed-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Tested-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masahiro Yamada 提交于
The kernel can only be compiled with an optimization option (-O2, -Os, or the currently proposed -Og). Hence, __OPTIMIZE__ is always defined in the kernel source. The fallback for the -O0 case is just hypothetical and pointless. Moreover, commit 0bb95f80 ("Makefile: Globally enable VLA warning") enabled -Wvla warning. The use of variable length arrays is banned. Link: http://lkml.kernel.org/r/1542856462-18836-2-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NKees Cook <keescook@chromium.org> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Tested-by: NNick Desaulniers <ndesaulniers@google.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
`extern' with function prototypes makes lines longer and creates more characters on the screen. Do not bug people with checkpatch.pl warnings for now as fallout can be devastating. Link: http://lkml.kernel.org/r/20181101134153.GA29267@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cheng Lin 提交于
If the number of input parameters is less than the total parameters, an EINVAL error will be returned. For example, we use proc_doulongvec_minmax to pass up to two parameters with kern_table: { .procname = "monitor_signals", .data = &monitor_sigs, .maxlen = 2*sizeof(unsigned long), .mode = 0644, .proc_handler = proc_doulongvec_minmax, }, Reproduce: When passing two parameters, it's work normal. But passing only one parameter, an error "Invalid argument"(EINVAL) is returned. [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 1 2 [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals -bash: echo: write error: Invalid argument [root@cl150 ~]# echo $? 1 [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 3 2 [root@cl150 ~]# The following is the result after apply this patch. No error is returned when the number of input parameters is less than the total parameters. [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 1 2 [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# echo $? 0 [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 3 2 [root@cl150 ~]# There are three processing functions dealing with digital parameters, __do_proc_dointvec/__do_proc_douintvec/__do_proc_doulongvec_minmax. This patch deals with __do_proc_doulongvec_minmax, just as __do_proc_dointvec does, adding a check for parameters 'left'. In __do_proc_douintvec, its code implementation explicitly does not support multiple inputs. static int __do_proc_douintvec(...){ ... /* * Arrays are not supported, keep this simple. *Do not* add * support for them. */ if (vleft != 1) { *lenp = 0; return -EINVAL; } ... } So, just __do_proc_doulongvec_minmax has the problem. And most use of proc_doulongvec_minmax/proc_doulongvec_ms_jiffies_minmax just have one parameter. Link: http://lkml.kernel.org/r/1544081775-15720-1-git-send-email-cheng.lin130@zte.com.cnSigned-off-by: NCheng Lin <cheng.lin130@zte.com.cn> Acked-by: NLuis Chamberlain <mcgrof@kernel.org> Reviewed-by: NKees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Header of /proc/*/limits is a fixed string, so print it directly without formatting specifiers. Link: http://lkml.kernel.org/r/20181203164242.GB6904@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Link: http://lkml.kernel.org/r/20181203164015.GA6904@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Biggers 提交于
name_to_int() is defined in fs/proc/util.c and declared in fs/proc/internal.h, but the declaration isn't included at the point of the definition. Include the header to enforce that the definition matches the declaration. This addresses a gcc warning when -Wmissing-prototypes is enabled. Link: http://lkml.kernel.org/r/20181115001833.49371-1-ebiggers@kernel.orgSigned-off-by: NEric Biggers <ebiggers@google.com> Reviewed-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Benjamin Gordon 提交于
Access to timerslack_ns is controlled by a process having CAP_SYS_NICE in its effective capability set, but the current check looks in the root namespace instead of the process' user namespace. Since a process is allowed to do other activities controlled by CAP_SYS_NICE inside a namespace, it should also be able to adjust timerslack_ns. Link: http://lkml.kernel.org/r/20181030180012.232896-1-bmgordon@google.comSigned-off-by: NBenjamin Gordon <bmgordon@google.com> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Cc: John Stultz <john.stultz@linaro.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Oren Laadan <orenl@cellrox.com> Cc: Ruchi Kandoi <kandoiruchi@google.com> Cc: Rom Lemarchand <romlem@android.com> Cc: Todd Kjos <tkjos@google.com> Cc: Colin Cross <ccross@android.com> Cc: Nick Kralevich <nnk@google.com> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Elliott Hughes <enh@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 1月, 2019 16 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input updates from Dmitry Torokhov: "A tiny pull request this merge window unfortunately, should get more material in for the next release: - new driver for Raspberry Pi's touchscreen (firmware interface) - miscellaneous input driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G Input: atmel_mxt_ts - don't try to free unallocated kernel memory Input: drv2667 - fix indentation issues Input: touchscreen - fix coding style issue Input: add official Raspberry Pi's touchscreen driver Input: nomadik-ske-keypad - fix a loop timeout test Input: rotary-encoder - don't log EPROBE_DEFER to kernel log Input: olpc_apsp - remove set but not used variable 'np' Input: olpc_apsp - enable the SP clock Input: olpc_apsp - check FIFO status on open(), not probe() Input: olpc_apsp - drop CONFIG_OLPC dependency clk: mmp2: add SP clock dt-bindings: marvell,mmp2: Add clock id for the SP clock Input: ad7879 - drop platform data support
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio/vhost updates from Michael Tsirkin: "Features, fixes, cleanups: - discard in virtio blk - misc fixes and cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: correct the related warning message vhost: split structs into a separate header file virtio: remove deprecated VIRTIO_PCI_CONFIG() vhost/vsock: switch to a mutex for vhost_vsock_hash virtio_blk: add discard and write zeroes support
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull more block updates from Jens Axboe: - Dead code removal for loop/sunvdc (Chengguang) - Mark BIDI support for bsg as deprecated, logging a single dmesg warning if anyone is actually using it (Christoph) - blkcg cleanup, killing a dead function and making the tryget_closest variant easier to read (Dennis) - Floppy fixes, one fixing a regression in swim3 (Finn) - lightnvm use-after-free fix (Gustavo) - gdrom leak fix (Wenwen) - a set of drbd updates (Lars, Luc, Nathan, Roland) * tag 'for-4.21/block-20190102' of git://git.kernel.dk/linux-block: (28 commits) block/swim3: Fix regression on PowerBook G3 block/swim3: Fix -EBUSY error when re-opening device after unmount block/swim3: Remove dead return statement block/amiflop: Don't log error message on invalid ioctl gdrom: fix a memory leak bug lightnvm: pblk: fix use-after-free bug block: sunvdc: remove redundant code block: loop: remove redundant code bsg: deprecate BIDI support in bsg blkcg: remove unused __blkg_release_rcu() blkcg: clean up blkg_tryget_closest() drbd: Change drbd_request_detach_interruptible's return type to int drbd: Avoid Clang warning about pointless switch statment drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire") drbd: skip spurious timeout (ping-timeo) when failing promote drbd: don't retry connection if peers do not agree on "authentication" settings drbd: fix print_st_err()'s prototype to match the definition drbd: avoid spurious self-outdating with concurrent disconnect / down drbd: do not block when adjusting "disk-options" while IO is frozen drbd: fix comment typos ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull libata fix from Jens Axboe: "This libata change missed the original libata pull request. Just a single fix in here, fixing a missed reference drop" * tag 'for-4.21/libata-20190102' of git://git.kernel.dk/linux-block: ata: pata_macio: add of_node_put()
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull more clk updates from Stephen Boyd: "One more patch to generalize a set of DT binding defines now before -rc1 comes out. This way the SoC DTS files can use the proper defines from a stable tag" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx8qxp: make the name of clock ID generic
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull device properties framework fixes from Rafael Wysocki: "Fix two potential NULL pointer dereferences found by Coverity in the software nodes code introduced recently (Colin Ian King)" * tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: drivers: base: swnode: check if swnode is NULL before dereferencing it drivers: base: swnode: check if pointer p is NULL before dereferencing it
-
git://git.linaro.org/landing-teams/working/fujitsu/integration由 Linus Torvalds 提交于
Pull mailbox updates from Jassi Brar: - Introduce device-managed registration devm_mbox_controller_un/register and convert drivers to use it - Introduce flush api to support clients that must busy-wait in atomic context - Support multiple controllers per device - Hi3660: a bugfix and constify ops structure - TI-MsgMgr: off by one bugfix. - BCM: switch to spdx license - Tegra-HSP: support for shared mailboxes and suspend/resume. * tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (30 commits) mailbox: tegra-hsp: Use device-managed registration API mailbox: tegra-hsp: use devm_kstrdup_const() mailbox: tegra-hsp: Add suspend/resume support mailbox: tegra-hsp: Add support for shared mailboxes dt-bindings: tegra186-hsp: Add shared mailboxes mailbox: Allow multiple controllers per device mailbox: Support blocking transfers in atomic context mailbox: ti-msgmgr: Use device-managed registration API mailbox: stm32-ipcc: Use device-managed registration API mailbox: rockchip: Use device-managed registration API mailbox: qcom-apcs: Use device-managed registration API mailbox: platform-mhu: Use device-managed registration API mailbox: omap: Use device-managed registration API mailbox: mtk-cmdq: Remove needless devm_kfree() calls mailbox: mtk-cmdq: Use device-managed registration API mailbox: xgene-slimpro: Use device-managed registration API mailbox: sti: Use device-managed registration API mailbox: altera: Use device-managed registration API mailbox: imx: Use device-managed registration API mailbox: hi6220: Use device-managed registration API ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML updates from Richard Weinberger: - DISCARD support for our block device driver - Many TLB flush optimizations - Various smaller fixes - And most important, Anton agreed to help me maintaining UML * 'for-linus-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Remove obsolete reenable_XX calls um: writev needs <sys/uio.h> Add Anton Ivanov to UML maintainers um: remove redundant generic-y um: Optimize Flush TLB for force/fork case um: Avoid marking pages with "changed protection" um: Skip TLB flushing where not needed um: Optimize TLB operations v2 um: Remove unnecessary faulted check in uaccess.c um: Add support for DISCARD in the UBD Driver um: Remove unsafe printks from the io thread um: Clean-up command processing in UML UBD driver um: Switch to block-mq constants in the UML UBD driver um: Make GCOV depend on !KCOV um: Include sys/uio.h to have writev() um: Add HAVE_DEBUG_BUGVERBOSE um: Update maintainers file entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 updates from Martin Schwidefsky: - A larger update for the zcrypt / AP bus code: + Update two inline assemblies in the zcrypt driver to make gcc happy + Add a missing reply code for invalid special commands for zcrypt + Allow AP device reset to be triggered from user space + Split the AP scan function into smaller, more readable functions - Updates for vfio-ccw and vfio-ap + Add maintainers and reviewer for vfio-ccw + Include facility.h in vfio_ap_drv.c to avoid fragile include chain + Simplicy vfio-ccw state machine - Use the common code version of bust_spinlocks - Make use of the DEFINE_SHOW_ATTRIBUTE - Fix three incorrect file permissions in the DASD driver - Remove bit spin-lock from the PCI interrupt handler - Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code * tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: rework ap scan bus code s390/zcrypt: make sysfs reset attribute trigger queue reset s390/pci: fix sleeping in atomic during hotplug s390/pci: remove bit_lock usage in interrupt handler s390/drivers: fix proc/debugfs file permissions s390: convert to DEFINE_SHOW_ATTRIBUTE MAINTAINERS/vfio-ccw: add Farhan and Eric, make Halil Reviewer vfio: ccw: Merge BUSY and BOXED states s390: use common bust_spinlocks() s390/zcrypt: improve special ap message cmd handling s390/ap: rework assembler functions to use unions for in/out register variables s390: vfio-ap: include <asm/facility> for test_facility()
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - xprtrdma: Yet another double DMA-unmap # v4.20 Features: - Allow some /proc/sys/sunrpc entries without CONFIG_SUNRPC_DEBUG - Per-xprt rdma receive workqueues - Drop support for FMR memory registration - Make port= mount option optional for RDMA mounts Other bugfixes and cleanups: - Remove unused nfs4_xdev_fs_type declaration - Fix comments for behavior that has changed - Remove generic RPC credentials by switching to 'struct cred' - Fix crossing mountpoints with different auth flavors - Various xprtrdma fixes from testing and auditing the close code - Fixes for disconnect issues when using xprtrdma with krb5 - Clean up and improve xprtrdma trace points - Fix NFS v4.2 async copy reboot recovery" * tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits) sunrpc: convert to DEFINE_SHOW_ATTRIBUTE sunrpc: Add xprt after nfs4_test_session_trunk() sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFS sunrpc: handle ENOMEM in rpcb_getport_async NFS: remove unnecessary test for IS_ERR(cred) xprtrdma: Prevent leak of rpcrdma_rep objects NFSv4.2 fix async copy reboot recovery xprtrdma: Don't leak freed MRs xprtrdma: Add documenting comment for rpcrdma_buffer_destroy xprtrdma: Replace outdated comment for rpcrdma_ep_post xprtrdma: Update comments in frwr_op_send SUNRPC: Fix some kernel doc complaints SUNRPC: Simplify defining common RPC trace events NFS: Fix NFSv4 symbolic trace point output xprtrdma: Trace mapping, alloc, and dereg failures xprtrdma: Add trace points for calls to transport switch methods xprtrdma: Relocate the xprtrdma_mr_map trace points xprtrdma: Clean up of xprtrdma chunk trace points xprtrdma: Remove unused fields from rpcrdma_ia xprtrdma: Cull dprintk() call sites ...
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd updates from Bruce Fields: "Thanks to Vasily Averin for fixing a use-after-free in the containerized NFSv4.2 client, and cleaning up some convoluted backchannel server code in the process. Otherwise, miscellaneous smaller bugfixes and cleanup" * tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linux: (25 commits) nfs: fixed broken compilation in nfs_callback_up_net() nfs: minor typo in nfs4_callback_up_net() sunrpc: fix debug message in svc_create_xprt() sunrpc: make visible processing error in bc_svc_process() sunrpc: remove unused xpo_prep_reply_hdr callback sunrpc: remove svc_rdma_bc_class sunrpc: remove svc_tcp_bc_class sunrpc: remove unused bc_up operation from rpc_xprt_ops sunrpc: replace svc_serv->sv_bc_xprt by boolean flag sunrpc: use-after-free in svc_process_common() sunrpc: use SVC_NET() in svcauth_gss_* functions nfsd: drop useless LIST_HEAD lockd: Show pid of lockd for remote locks NFSD remove OP_CACHEME from 4.2 op_flags nfsd: Return EPERM, not EACCES, in some SETATTR cases sunrpc: fix cache_head leak due to queued request nfsd: clean up indentation, increase indentation in switch statement svcrdma: Optimize the logic that selects the R_key to invalidate nfsd: fix a warning in __cld_pipe_upcall() nfsd4: fix crash on writing v4_end_grace before nfsd startup ...
-
git://github.com/martinetd/linux由 Linus Torvalds 提交于
Pull 9p updates from Dominique Martinet: "Missing prototype warning fix and a syzkaller fix when a 9p server advertises a too small msize" * tag '9p-for-4.21' of git://github.com/martinetd/linux: 9p/net: put a lower bound on msize net/9p: include trans_common.h to fix missing prototype warning.
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs updates from Steve French: - four fixes for stable - improvements to DFS including allowing failover to alternate targets - some small performance improvements * tag '4.21-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (39 commits) cifs: update internal module version number cifs: we can not use small padding iovs together with encryption cifs: Minor Kconfig clarification cifs: Always resolve hostname before reconnecting cifs: Add support for failover in cifs_reconnect_tcon() cifs: Add support for failover in smb2_reconnect() cifs: Only free DFS target list if we actually got one cifs: start DFS cache refresher in cifs_mount() cifs: Use GFP_ATOMIC when a lock is held in cifs_mount() cifs: Add support for failover in cifs_reconnect() cifs: Add support for failover in cifs_mount() cifs: remove set but not used variable 'sep' cifs: Make use of DFS cache to get new DFS referrals cifs: minor updates to documentation cifs: check kzalloc return cifs: remove set but not used variable 'server' cifs: Use kzfree() to free password cifs: Fix to use kmem_cache_free() instead of kfree() cifs: update for current_kernel_time64() removal cifs: Add DFS cache routines ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull TPM updates from James Morris: - Support for partial reads of /dev/tpm0. - Clean up for TPM 1.x code: move the commands to tpm1-cmd.c and make everything to use the same data structure for building TPM commands i.e. struct tpm_buf. * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (25 commits) tpm: add support for partial reads tpm: tpm_ibmvtpm: fix kdoc warnings tpm: fix kdoc for tpm2_flush_context_cmd() tpm: tpm_try_transmit() refactor error flow. tpm: use u32 instead of int for PCR index tpm1: reimplement tpm1_continue_selftest() using tpm_buf tpm1: reimplement SAVESTATE using tpm_buf tpm1: rename tpm1_pcr_read_dev to tpm1_pcr_read() tpm1: implement tpm1_pcr_read_dev() using tpm_buf structure tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure tpm: tpm-space.c remove unneeded semicolon tpm: tpm-interface.c drop unused macros tpm: add tpm_auto_startup() into tpm-interface.c tpm: factor out tpm_startup function tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.c tpm: move tpm 1.x selftest code from tpm-interface.c tpm1-cmd.c tpm: factor out tpm1_get_random into tpm1-cmd.c tpm: move tpm_getcap to tpm1-cmd.c tpm: move tpm1_pcr_extend to tpm1-cmd.c tpm: factor out tpm_get_timeouts() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull smack updates from James Morris: "Two Smack patches for 4.21. Jose's patch adds missing documentation and Zoran's fleshes out the access checks on keyrings" * 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: Smack: Improve Documentation smack: fix access permissions for keyring
-
由 Linus Torvalds 提交于
This mostly reverts commit 849a3700 ("block: avoid ordered task state change for polled IO"). It was wrongly claiming that the ordering wasn't necessary. The memory barrier _is_ necessary. If something is truly polling and not going to sleep, it's the whole state setting that is unnecessary, not the memory barrier. Whenever you set your state to a sleeping state, you absolutely need the memory barrier. Note that sometimes the memory barrier can be elsewhere. For example, the ordering might be provided by an external lock, or by setting the process state to sleeping before adding yourself to the wait queue list that is used for waking up (where the wait queue lock itself will guarantee that any wakeup will correctly see the sleeping state). But none of those cases were true here. NOTE! Some of the polling paths may indeed be able to drop the state setting entirely, at which point the memory barrier also goes away. (Also note that this doesn't revert the TASK_RUNNING cases: there is no race between a wakeup and setting the process state to TASK_RUNNING, since the end result doesn't depend on ordering). Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-