1. 11 7月, 2016 3 次提交
    • L
      x86/quirks: Add early quirk to reset Apple AirPort card · abb2bafd
      Lukas Wunner 提交于
      The EFI firmware on Macs contains a full-fledged network stack for
      downloading OS X images from osrecovery.apple.com. Unfortunately
      on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331
      wireless card on every boot and leaves it enabled even after
      ExitBootServices has been called. The card continues to assert its IRQ
      line, causing spurious interrupts if the IRQ is shared. It also corrupts
      memory by DMAing received packets, allowing for remote code execution
      over the air. This only stops when a driver is loaded for the wireless
      card, which may be never if the driver is not installed or blacklisted.
      
      The issue seems to be constrained to the Broadcom 4331. Chris Milsted
      has verified that the newer Broadcom 4360 built into the MacBookPro11,3
      (2013/2014) does not exhibit this behaviour. The chances that Apple will
      ever supply a firmware fix for the older machines appear to be zero.
      
      The solution is to reset the card on boot by writing to a reset bit in
      its mmio space. This must be done as an early quirk and not as a plain
      vanilla PCI quirk to successfully combat memory corruption by DMAed
      packets: Matthew Garrett found out in 2012 that the packets are written
      to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html).
      This type of memory is made available to the page allocator by
      efi_free_boot_services(). Plain vanilla PCI quirks run much later, in
      subsys initcall level. In-between a time window would be open for memory
      corruption. Random crashes occurring in this time window and attributed
      to DMAed packets have indeed been observed in the wild by Chris
      Bainbridge.
      
      When Matthew Garrett analyzed the memory corruption issue in 2012, he
      sought to fix it with a grub quirk which transitions the card to D3hot:
      http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56
      
      This approach does not help users with other bootloaders and while it
      may prevent DMAed packets, it does not cure the spurious interrupts
      emanating from the card. Unfortunately the card's mmio space is
      inaccessible in D3hot, so to reset it, we have to undo the effect of
      Matthew's grub patch and transition the card back to D0.
      
      Note that the quirk takes a few shortcuts to reduce the amount of code:
      The size of BAR 0 and the location of the PM capability is identical
      on all affected machines and therefore hardcoded. Only the address of
      BAR 0 differs between models. Also, it is assumed that the BCMA core
      currently mapped is the 802.11 core. The EFI driver seems to always take
      care of this.
      
      Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback
      towards finding the best solution to this problem.
      
      The following should be a comprehensive list of affected models:
          iMac13,1        2012  21.5"       [Root Port 00:1c.3 = 8086:1e16]
          iMac13,2        2012  27"         [Root Port 00:1c.3 = 8086:1e16]
          Macmini5,1      2011  i5 2.3 GHz  [Root Port 00:1c.1 = 8086:1c12]
          Macmini5,2      2011  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1c12]
          Macmini5,3      2011  i7 2.0 GHz  [Root Port 00:1c.1 = 8086:1c12]
          Macmini6,1      2012  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1e12]
          Macmini6,2      2012  i7 2.3 GHz  [Root Port 00:1c.1 = 8086:1e12]
          MacBookPro8,1   2011  13"         [Root Port 00:1c.1 = 8086:1c12]
          MacBookPro8,2   2011  15"         [Root Port 00:1c.1 = 8086:1c12]
          MacBookPro8,3   2011  17"         [Root Port 00:1c.1 = 8086:1c12]
          MacBookPro9,1   2012  15"         [Root Port 00:1c.1 = 8086:1e12]
          MacBookPro9,2   2012  13"         [Root Port 00:1c.1 = 8086:1e12]
          MacBookPro10,1  2012  15"         [Root Port 00:1c.1 = 8086:1e12]
          MacBookPro10,2  2012  13"         [Root Port 00:1c.1 = 8086:1e12]
      
      For posterity, spurious interrupts caused by the Broadcom 4331 wireless
      card resulted in splats like this (stacktrace omitted):
      
          irq 17: nobody cared (try booting with the "irqpoll" option)
          handlers:
          [<ffffffff81374370>] pcie_isr
          [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci]
          [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec]
          Disabling IRQ #17
      
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781
      Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916
      Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16
      Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819
      Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621
      Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5
      Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130
      Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732
      Tested-by: Konstantin Simanov <k.simanov@stlk.ru>        # [MacBookPro8,1]
      Tested-by: Lukas Wunner <lukas@wunner.de>                # [MacBookPro9,1]
      Tested-by: Bryan Paradis <bryan.paradis@gmail.com>       # [MacBookPro9,2]
      Tested-by: Andrew Worsley <amworsley@gmail.com>          # [MacBookPro10,1]
      Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2]
      Signed-off-by: NLukas Wunner <lukas@wunner.de>
      Acked-by: NRafał Miłecki <zajec5@gmail.com>
      Acked-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Bjorn Helgaas <bhelgaas@google.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Chris Milsted <cmilsted@redhat.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Matthew Garrett <mjg59@srcf.ucam.org>
      Cc: Michael Buesch <m@bues.ch>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: b43-dev@lists.infradead.org
      Cc: linux-pci@vger.kernel.org
      Cc: linux-wireless@vger.kernel.org
      Cc: stable@vger.kernel.org
      Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Apply nvidia_bugs quirk only on root bus
      Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Reintroduce scanning of secondary buses
      Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de
      [ Did minor readability edits. ]
      Signed-off-by: NIngo Molnar <mingo@kernel.org>
      abb2bafd
    • L
      x86/quirks: Reintroduce scanning of secondary buses · 850c3210
      Lukas Wunner 提交于
      We used to scan secondary buses until the following commit that
      was applied in 2009:
      
        8659c406 ("x86: only scan the root bus in early PCI quirks")
      
      which commit constrained early quirks to the root bus only. Its
      motivation was to prevent application of the nvidia_bugs quirk
      on secondary buses.
      
      We're about to add a quirk to reset the Broadcom 4331 wireless card on
      2011/2012 Macs, which is located on a secondary bus behind a PCIe root
      port. To facilitate that, reintroduce scanning of secondary buses.
      
      The commit message of 8659c406 notes that scanning only the root bus
      "saves quite some unnecessary scanning work". The algorithm used prior
      to 8659c406 was particularly time consuming because it scanned
      buses 0 to 31 brute force. To avoid lengthening boot time, employ a
      recursive strategy which only scans buses that are actually reachable
      from the root bus.
      
      Yinghai Lu pointed out that the secondary bus number read from a
      bridge's config space may be invalid, in particular a value of 0 would
      cause an infinite loop. The PCI core goes beyond that and recurses to a
      child bus only if its bus number is greater than the parent bus number
      (see pci_scan_bridge()). Since the root bus is numbered 0, this implies
      that secondary buses may not be 0. Do the same on early scanning.
      
      If this algorithm is found to significantly impact boot time or cause
      infinite loops on broken hardware, it would be possible to limit its
      recursion depth: The Broadcom 4331 quirk applies at depth 1, all others
      at depth 0, so the bus need not be scanned deeper than that for now. An
      alternative approach would be to revert to scanning only the root bus,
      and apply the Broadcom 4331 quirk to the root ports 8086:1c12, 8086:1e12
      and 8086:1e16. Apple always positioned the card behind either of these
      three ports. The quirk would then check presence of the card in slot 0
      below the root port and do its deed.
      Signed-off-by: NLukas Wunner <lukas@wunner.de>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Bjorn Helgaas <bhelgaas@google.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: linux-pci@vger.kernel.org
      Link: http://lkml.kernel.org/r/f0daa70dac1a9b2483abdb31887173eb6ab77bdf.1465690253.git.lukas@wunner.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
      850c3210
    • L
      x86/quirks: Apply nvidia_bugs quirk only on root bus · 447d29d1
      Lukas Wunner 提交于
      Since the following commit:
      
        8659c406 ("x86: only scan the root bus in early PCI quirks")
      
      ... early quirks are only applied to devices on the root bus.
      
      The motivation was to prevent application of the nvidia_bugs quirk on
      secondary buses.
      
      We're about to reintroduce scanning of secondary buses for a quirk to
      reset the Broadcom 4331 wireless card on 2011/2012 Macs. To prevent
      regressions, open code the requirement to apply nvidia_bugs only on the
      root bus.
      Signed-off-by: NLukas Wunner <lukas@wunner.de>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Bjorn Helgaas <bhelgaas@google.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Josh Poimboeuf <jpoimboe@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Link: http://lkml.kernel.org/r/4d5477c1d76b2f0387a780f2142bbcdd9fee869b.1465690253.git.lukas@wunner.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
      447d29d1
  2. 09 7月, 2016 9 次提交
  3. 08 7月, 2016 18 次提交
  4. 07 7月, 2016 10 次提交