attributes format change (attr2).

SGI-PV: 941645
SGI-Modid: xfs-linux:xfs-kern:23833a
Signed-off-by: NNathan Scott <nathans@sgi.com>

filesystems to expose the filesystem stripe width in stat(2) rather than
the page cache size. This allows applications requiring high bandwidth to
easily determine the optimum I/O size for the underlying filesystem. The
default is to report the page cache size (i.e. "nolargeio").

SGI-PV: 942818
SGI-Modid: xfs-linux:xfs-kern:23830a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 942815
SGI-Modid: xfs-linux:xfs-kern:23829a
Signed-off-by: NNathan Scott <nathans@sgi.com>

MAXINT

SGI-PV: 942528
SGI-Modid: xfs-linux:xfs-kern:23828a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 936331
SGI-Modid: xfs-linux:xfs-kern:23827a
Signed-off-by: NNathan Scott <nathans@sgi.com>

replace PBF_NONE with an inverted PBF_DONE, so it's like all the other
flags.

SGI-PV: 942609
SGI-Modid: xfs-linux:xfs-kern:199136a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 913332
SGI-Modid: xfs-linux:xfs-kern:198926a
Signed-off-by: NEric Sandeen <sandeen@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

writes.  In addition flush the disk cache on fsync if the sync cached
operation didn't sync the log to disk (this requires some additional
bookeping in the transaction and log code). If the device doesn't claim to
support barriers, the filesystem has an extern log volume or the trial
superblock write with barriers enabled failed we disable barriers and
print a warning.  We should probably fail the mount completely, but that
could lead to nasty boot failures for the root filesystem.  Not enabled by
default yet, needs more destructive testing first.

SGI-PV: 912426
SGI-Modid: xfs-linux:xfs-kern:198723a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 908809
SGI-Modid: xfs-linux:xfs-kern:198669a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 942243
SGI-Modid: xfs-linux:xfs-kern:198658a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 908809
SGI-Modid: xfs-linux:xfs-kern:198656a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

reverse startup order

SGI-PV: 942063
SGI-Modid: xfs-linux:xfs-kern:198651a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

Signed-off-by: NAnton Altaparmakov <aia21@cantab.net>

The USB "handoff" code is an early PCI quirk to make sure we own the USB
controller (as opposed to the BIOS/SMM).  But if the controller isn't
even enabled yet, don't try to access it.

Acked-by: Paul Mackerras <paulus@samba.org> (who had an alternate patch)
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit f2b36db6 causes a bootup hang on
at least one machine.  Revert for now until we understand why.  The old
code may be ugly, but it works.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds the magic IO wakeup code for the CardBus version of the
Creative Labs Audigy 2 to the snd-emu10k1 driver.

Without the magic IO enable sequence, reading from the IO region of the
card will fail spectacularly, and the machine will hang.

My next task will be getting the driver to actually play sound without
distortion.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

[ This is a work-in-progress, but since it avoids a total lockup
  if the emu10k module is loaded on a machine with the cardbus
  card inserted, we're better off with it than without it, even
  if sound quality is bad right now ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When the inode count is zero in inode writeback, the

	WARN_ON(!(inode->i_state & I_WILL_FREE));

is broken, and needs to test for either I_WILL_FREE|I_FREEING.

When the inode is in I_FREEING state, it's already out of the visibility
of the vm so it can't be freed so it doesn't require the __iget and the
generic_delete_inode path can call the sync internally to the lowlevel
fs callback during the last iput. So the inode being in I_FREEING is
also a valid condition for calling the sync with i_count == 0.

The specific stack trace is this:

  0xc00000007b8fb6e0  0xc00000000010118c  .__writeback_single_inode +0x5c
  0xc00000007b8fb6e0  0xc0000000001014dc (lr) .sync_inode +0x3c
  0xc00000007b8fb790  0xc0000000001014dc  .sync_inode +0x3c
  0xc00000007b8fb820  0xc0000000001a5020  .ext2_sync_inode +0x64
  0xc00000007b8fb8f0  0xc0000000001a65b4  .ext2_truncate +0x3f8
  0xc00000007b8fba40  0xc0000000001a6940  .ext2_delete_inode +0xdc
  0xc00000007b8fbac0  0xc0000000000f7a5c  .generic_delete_inode +0x124
  0xc00000007b8fbb50  0xc0000000000f5fe0  .iput +0xb8
  0xc00000007b8fbbe0  0xc0000000000e9fd4  .sys_unlink +0x2a8
  0xc00000007b8fbd10  0xc00000000001048c  .ret_from_syscall_1 +0x0
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Jeff Garzik <jgarzik@pobox.com> points out that this was wrong: we need to
disable local interrupts while holding KM_IRQ0 due to IRQ sharing.

And holding interrupts off during a big PIO opration is expensive, so we only
want to do that if we know the page was highmem.

So revert commit 17fd47abSigned-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_PC is left-over cruft after the introduction of CONFIG_X86_PC with
the subarch split.  Remove it, and fixup the remaining users to depend on
CONFIG_X86_PC instead.
Signed-off-by: NArthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Tejun Heo notes:

   "I'm currently debugging this.  The problem is that we are using the
    generic dispatch queue directly in the noop sched and merging is NOT
    allowed on dispatch queues but generic handling of last_merge tries
    to merge requests.  I'm still trying to verify this, so I'll be back
    with results soon."

In the meantime, disable merging for noop by setting REQ_NOMERGE in
elevator_noop_add_request().

Eventually, we should add a noop_list and do the dispatching like in the
other io schedulers.  Merging is still beneficial for noop (and it has
always done it).
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't clear ->elevator_data on exit, if we are switching queues we are
overwriting the data of the new io scheduler.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Manual #include fixups for clashes - there may be some unnecessary

The problem is that adbhid[]->input is NULL, so the kernel oopses with
a null pointer dereference as soon as a key is pressed.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

A lot of power packed into a little patch.

This change eliminates the sharing between our controller-wide spinlock
and the SCSI core's Scsi_Host lock.  As the locking in libata was
already highly compartmentalized, always referencing our own lock, and
never scsi_host::host_lock.

As a side effect, this change eliminates a deadlock from calling
scsi_finish_command() while inside our spinlock.

... namely, the change to the 2-argument pte_alloc_kernel.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NPaul Mackerras <paulus@samba.org>

Integrate ata_exec() and ata_tf_to_host() into their only caller,
ata_bus_edd().

Rename ata_tf_to_host_nolock() to ata_tf_to_host().

This makes locking a bit easier to review, and may help pave the way for
future changes.

Signed-off-by: NPaul Mackerras <paulus@samba.org>

We had a static memory_limit in prom.c, and then another one defined
in setup_64.c and used in numa.c, which resulted in the kernel crashing
when mem=xxx was given on the command line.  This puts the declaration
in system.h and the definition in mem.c.  This also moves the
definition of tce_alloc_start/end out of setup_64.c.
Signed-off-by: NPaul Mackerras <paulus@samba.org>