- 27 8月, 2014 1 次提交
-
-
由 Christian König 提交于
This fixes a problem with GPU resets and TLB flushes on SI/CIK. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 19 8月, 2014 1 次提交
-
-
由 Michel Dänzer 提交于
It isn't necessary for command streams generated by the kernel (at least not while we aren't storing ring or indirect buffers in VRAM). Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 8月, 2014 1 次提交
-
-
由 Alex Deucher 提交于
Add a module paramter to enable bapm on APUs. It's disabled by default on certain APUs due to stability issues. This option makes it easier to test and to enable it on systems that are stable. bug: https://bugzilla.kernel.org/show_bug.cgi?id=81021Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 05 8月, 2014 19 次提交
-
-
由 Mario Kleiner 提交于
Skip the "manual" pageflip completion checks via polling and guessing in the vblank handler radeon_crtc_handle_vblank() on asics which are known to reliably support hw pageflip completion irqs. Those pflip irqs are a more reliable and race-free method of handling pageflip completion detection, whereas the "classic" polling method has some small races in combination with dpm on, and with the reworked pageflip implementation since Linux 3.16. On old asics without pflip irqs, the classic method is used. On asics with known good pflip irqs, only pflip irqs are used by default, but a new module parameter "use_pflipirqs" allows to override this in case we encounter asics in the wild with unreliable or faulty pflip irqs. A module parameter of 0 allows to use the classic method only in such a case. A parameter of 1 allows to use both classic method and pflip irqs as additional band-aid to avoid some small races which could happen with the classic method alone. The setting 1 gives Linux 3.16 behaviour. Hw pflip irqs are available since R600. Tested on DCE-4, AMD Cedar - FirePro 2270. v2: agd5f: only enable pflip interrupts on DCE4+ as they are not reliable on older asics. Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Move the decision what to use into the common VM code. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Scales much better than scanning the address range linearly. v2: store pfn instead of address Signed-off-by: NChristian König <christian.koenig@amd.com> Tested-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Don't wait for the BO to be used again, just update the PT on the next VM use. v2: remove stray semicolon. Signed-off-by: NChristian König <christian.koenig@amd.com> Tested-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Some hawaii boards use a different method for fetching the voltage information from the vbios. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Michel Dänzer 提交于
This ensures the GPU sees all previous CPU writes to VRAM, which makes it safe: * For userspace to stream data from CPU to GPU via VRAM instead of GTT * For IBs to be stored in VRAM instead of GTT * For ring buffers to be stored in VRAM instead of GTT, if the HPD flush is performed via MMIO Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
And clean up the function comment a little. Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
That didn't worked correctly any more and opened up a security problem. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Unused and unimplemented. Also fix specifying the kernel flag incorrectly at one occasion. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Some PX laptops seems to have problems turning the dGPU on/off. Add a quirk list to disable runpm by default on those systems. Also convert the current PX d3 delay handling to a quirk. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381 https://bugzilla.kernel.org/show_bug.cgi?id=74551Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Now that fallback to gtt is fixed for cpu access, we can remove this limit. bug: https://bugs.freedesktop.org/show_bug.cgi?id=78717 v2: use new gart_pin_size to accurately track available gtt. v3: fix comment v4: clarify comment Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
-
由 Alex Deucher 提交于
So we know how large an allocation we can allow. v2: incorporate Michel's comments Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
-
由 Michel Dänzer 提交于
v2: fix rebase onto drm-fixes Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
Doesn't seem necessary, the GART table memory should be persistent. Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Lauri Kasanen 提交于
This was originally un-inlined by Andi Kleen in 2011 citing size concerns. Indeed, a first attempt at inlining it grew radeon.ko by 7%. However, 2% of cpu is spent in this function. Simply inlining it gave 1% more fps in Urban Terror. v2: We know the minimum MMIO size. Adding it to the if allows the compiler to optimize the branch out, improving both performance and size. The v2 patch decreases radeon.ko size by 2%. I didn't re-benchmark, but common sense says perf is now more than 1% better. v3: Also change _wreg, make the threshold a define. Inlining _wreg increased the size a bit compared to v2, so now radeon.ko is only 1% smaller. Signed-off-by: NLauri Kasanen <cand@gmx.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This adds CIK support for the new ucode format. v2: add size validation, integrate debug info v3: add support for MEC2 on KV v4: fix typos v4: update to latest format Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This adds SI support for the new ucode format. v2: add size validation, integrate debug info v3: update to latest version Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Some newer boards use SVI2 for voltage control rather than GPIO. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 22 7月, 2014 2 次提交
-
-
由 Christian König 提交于
Calling radeon_vm_bo_find on the IB BO during CS is illegal and can lead to an crash. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
v3: completely rewritten. We now just remember which areas of the PT to clear and do so on the next command submission. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=79980Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 17 7月, 2014 1 次提交
-
-
由 Michel Dänzer 提交于
As well as enabling the vblank interrupt. These shouldn't take any significant amount of time, but at least pinning the BO has actually been seen to fail in practice before, in which case we need to let userspace know about it. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 01 7月, 2014 2 次提交
-
-
由 Stefan Brüns 提交于
v2: agd5f: compile fix Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Some monitors seem to have problems with deep color enabled, even though they claim to support it. I'm not sure if the monitor need a quirk or if the driver is doing something the monitor doesn't like. At this point lets just disable deep color by default like we did for hdmi audio and work through the bugs so we can eventually enable it by default. bug: https://bugs.freedesktop.org/show_bug.cgi?id=80531Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 10 6月, 2014 5 次提交
-
-
由 Alex Deucher 提交于
Query to find out how many compute units on a GPU. Useful for OpenCL usermode drivers. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
v2: agd5f: simplify patch Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
And also domain to prefered_domains. That matches better what those values represent. Signed-off-by: NChristian König <christian.koenig@amd.com> Cc: Marek Olšák <maraeo@gmail.com> Reviewed-by: NMarek Olšák <marek.olsak@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
We never check the return value anyway and if the index isn't valid would crash way before calling the functions. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 04 6月, 2014 2 次提交
-
-
由 Christian König 提交于
Instead of trying to flip inside the vblank period when the buffer is idle, offload blocking for idle to a kernel thread and program the flip directly into the hardware. v2: add error handling, fix EBUSY handling v3: add proper exclusive_lock handling v4: update crtc->primary->fb when the flip actually happens Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This reverts commit 1aab5514. Apply the fixed up version instead.
-
- 02 6月, 2014 5 次提交
-
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Instead of trying to flip inside the vblank period when the buffer is idle, offload blocking for idle to a kernel thread and program the flip directly into the hardware. v2: add error handling, fix EBUSY handling v3: add proper exclusive_lock handling Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
They are doing the same on all generations anyway. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
This patch implements support for VRAM page table entry compression. PTE construction is enhanced to identify physically contiguous page ranges and mark them in the PTE fragment field. L1/L2 TLB support is enabled for 64KB (SI/CIK) and 256KB (NI) PTE fragments, significantly improving TLB utilization for VRAM allocations. Linear store bandwidth is improved from 60GB/s to 125GB/s on Pitcairn. Unigine Heaven 3.0 sees an average improvement from 24.7 to 27.7 FPS on default settings at 1920x1200 resolution with vsync disabled. See main comment in radeon_vm.c for a technical description. v2 (chk): rebased and simplified. v3 (chk): add missing hw setup v4 (chk): rebased on current drm-fixes-3.15 v5 (chk): fix comments and commit text Signed-off-by: NJay Cornwall <jay@jcornwall.me> Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 20 5月, 2014 1 次提交
-
-
由 Alex Deucher 提交于
Mullins is DCE83 just like Kabini. Set the proper number of endpoints on mullins. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NChristian König <christian.koenig@amd.com>
-