- 07 1月, 2006 40 次提交
-
-
由 Nick Piggin 提交于
Optimise page_state manipulations by introducing interrupt unsafe accessors to page_state fields. Callers must provide their own locking (either disable interrupts or not update from interrupt context). Switch over the hot callsites that can easily be moved under interrupts off sections. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Several counters already have the need to use 64 atomic variables on 64 bit platforms (see mm_counter_t in sched.h). We have to do ugly ifdefs to fall back to 32 bit atomic on 32 bit platforms. The VM statistics patch that I am working on will also make more extensive use of atomic64. This patch introduces a new type atomic_long_t by providing definitions in asm-generic/atomic.h that works similar to the c "long" type. Its 32 bits on 32 bit platforms and 64 bits on 64 bit platforms. Also cleans up the determination of the mm_counter_t in sched.h. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Give j and r meaningful names. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
The use k in the inner loop means that the highest zone nr is always used if any zone of a node is populated. This means that the policy zone is not correctly determined on arches that do no use HIGHMEM like ia64. Change the loop to decrement k which also simplifies the BUG_ON. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Currently the function to build a zonelist for a BIND policy has the side effect to set the policy_zone. This seems to be a bit strange. policy zone seems to not be initialized elsewhere and therefore 0. Do we police ZONE_DMA if no bind policy has been used yet? This patch moves the determination of the zone to apply policies to into the page allocator. We determine the zone while building the zonelist for nodes. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Simplify build_zonelists_node by removing the case statement. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Con Kolivas 提交于
There are numerous places we check whether a zone is populated or not. Provide a helper function to check for populated zones and convert all checks for zone->present_pages. Signed-off-by: NCon Kolivas <kernel@kolivas.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Li Shaohua <shaohua.li@intel.com> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: The shrink_zone() logic can, under some circumstances, cause far too many pages to be reclaimed. Say, we're scanning at high priority and suddenly hit a large number of reclaimable pages on the LRU. Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. Problem is, this change caused significant imbalance in inter-zone scan balancing by truncating scans of larger zones. Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone balancing algorithm would require that if we're scanning 100 pages of ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are reclaimed. Thus effectively causing smaller zones to be scanned relatively harder than large ones. Now I need to remember what the workload was which caused me to write this patch originally, then fix it up in a different way... Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
This atomic operation is superfluous: the pte will be added with the referenced bit set, and the page will be referenced through this mapping after the page fault handler returns anyway. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Optimise rmap functions by minimising atomic operations when we know there will be no concurrent modifications. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Cut down size slightly by not passing bad_page the function name (it should be able to be determined by dump_stack()). And cut down the number of printks in bad_page. Also, cut down some branching in the destroy_compound_page path. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Add dma32 to zone statistics. Also attempt to arrange struct page_state a bit better (visually). Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Remove the last bits of Martin's ill-fated sys_set_zone_reclaim(). Cc: Martin Hicks <mort@wildopensource.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nikita Danilov 提交于
As find_lock_page() already checks with TestSetPageLocked() that page is locked, there is no need to call lock_page() that will try-lock page again (chances of page being unlocked in between are small). Call __lock_page() directly, this saves one atomic operation. Also, mark truncate-while-slept path as unlikely while we are here. (akpm: ug. But this is actually a common path for normal old read()s against a page which is under readahead I/O so ho-hum.) Signed-off-by: NNikita Danilov <danilov@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
The attached patch cleans up the way the bootmem allocator frees pages. A new function, __free_pages_bootmem(), is provided in mm/page_alloc.c that is called from mm/bootmem.c to turn pages over to the main allocator. All the bits of code to initialise pages (clearing PG_reserved and setting the page count) are moved to here. The checks on page validity are removed, on the assumption that the struct page arrays will have been prepared correctly. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ravikiran G Thirumalai 提交于
Patch cleans up the alloc_bootmem fix for swiotlb. Patch removes alloc_bootmem_*_limit api and fixes alloc_boot_*low api to do the right thing -- allocate from low32 memory. Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Small cleanups that does not change generated code with the gcc's I've tested with. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
read_page_state and __get_page_state only traverse online CPUs, which will cause results to fluctuate when CPUs are plugged in or out. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
struct per_cpu_pages.low is useless. Remove it. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
bad_range is supposed to be a temporary check. It would be a pity to throw it out. Make it depend on CONFIG_DEBUG_VM instead. CONFIG_HOLES_IN_ZONE systems were relying on this to check pfn_valid in the page allocator. Add that to page_is_buddy instead. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Micro optimise some conditionals where we don't need lazy evaluation. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Inline set_page_refs. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Slightly optimise some page allocation and freeing functions by taking advantage of knowing whether or not interrupts are disabled. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
Minor optimization (though it doesn't help in the PREEMPT case, severely constrained by small ZAP_BLOCK_SIZE). free_pages_and_swap_cache works in chunks of 16, calling release_pages which works in chunks of PAGEVEC_SIZE. But PAGEVEC_SIZE was dropped from 16 to 14 in 2.6.10, so we're now doing more spin_lock_irq'ing than necessary: use PAGEVEC_SIZE throughout. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andy Whitcroft 提交于
Before SPARSEMEM is initialised we cannot provide an efficient pfn_to_nid() implmentation; before initialisation is complete we use early_pfn_to_nid() to provide location information. Until recently there was no non-init user of this functionality. Provide a post init pfn_to_nid() implementation. Note that this implmentation assumes that the pfn passed has been validated with pfn_valid(). The current single user of this function already has this check. Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andy Whitcroft 提交于
There are three places we define pfn_to_nid(). Two in linux/mmzone.h and one in asm/mmzone.h. These in essence represent the three memory models. The definition in linux/mmzone.h under !NEED_MULTIPLE_NODES is both the FLATMEM definition and the optimisation for single NUMA nodes; the one under SPARSEMEM is the NUMA sparsemem one; the one in asm/mmzone.h under DISCONTIGMEM is the discontigmem one. This is not in the least bit obvious, particularly the connection between the non-NUMA optimisations and the memory models. Two patches: flatmem-split-out-memory-model: simplifies the selection of pfn_to_nid() implementations. The selection is based primarily off the memory model selected. Optimisations for non-NUMA are applied where needed. sparse-provide-pfn_to_nid: implement pfn_to_nid() for SPARSEMEM This patch: pfn_to_nid is memory model specific The pfn_to_nid() call is memory model specific. It represents the locality identifier for the memory passed. Classically this would be a NUMA node, but not a chunk of memory under DISCONTIGMEM. The SPARSEMEM and FLATMEM memory model non-NUMA versions of pfn_to_nid() are folded together under NEED_MULTIPLE_NODES, while DISCONTIGMEM has its own optimisation. This is all very confusing. This patch splits out each implementation of pfn_to_nid() so that we can see them and the optimisations to each. Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Russell King 提交于
Fix two warnings in ipc/shm.c ipc/shm.c:122: warning: statement with no effect ipc/shm.c:560: warning: statement with no effect by converting the macros to empty inline functions. For safety, let's do all three. This also has the advantage that typechecking gets performed even without CONFIG_SHMEM enabled. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Kravetz 提交于
The NODES_SPAN_OTHER_NODES config option was created so that DISCONTIGMEM could handle pSeries numa layouts. However, support for DISCONTIGMEM has been replaced by SPARSEMEM on powerpc. As a result, this config option and supporting code is no longer needed. I have already sent a patch to Paul that removes the option from powerpc specific code. This removes the arch independent piece. Doesn't really matter which is applied first. Signed-off-by: NMike Kravetz <kravetz@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andy Whitcroft 提交于
pfn_to_pgdat() isn't used in common code. Remove definition. Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andy Whitcroft 提交于
kvaddr_to_nid() isn't used in common code nor in i386 code. Remove these definitions. Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
The number of parameters for find_or_alloc_page increases significantly after policy support is added to huge pages. Simplify the code by folding find_or_alloc_huge_page() into hugetlb_no_page(). Adam Litke objected to this piece in an earlier patch but I think this is a good simplification. Diffstat shows that we can get rid of almost half of the lines of find_or_alloc_page(). If we can find no consensus then lets simply drop this patch. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Acked-by: NWilliam Lee Irwin III <wli@holomorphy.com> Cc: Adam Litke <agl@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
mempolicy.c contains provisional interface for huge page allocation based on node numbers. This is in use in SLES9 but was never used (AFAIK) in upstream versions of Linux. Huge page allocations now use zonelists to figure out where to allocate pages. The use of zonelists allows us to find the closest hugepage which was the consideration of the NUMA distance for huge page allocations. Remove the obsolete functions. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Acked-by: NWilliam Lee Irwin III <wli@holomorphy.com> Cc: Adam Litke <agl@us.ibm.com> Acked-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
The huge_zonelist() function in the memory policy layer provides an list of zones ordered by NUMA distance. The hugetlb layer will walk that list looking for a zone that has available huge pages but is also in the nodeset of the current cpuset. This patch does not contain the folding of find_or_alloc_huge_page() that was controversial in the earlier discussion. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Acked-by: NWilliam Lee Irwin III <wli@holomorphy.com> Cc: Adam Litke <agl@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
This was discussed at http://marc.theaimsgroup.com/?l=linux-kernel&m=113166526217117&w=2 This patch changes the dequeueing to select a huge page near the node executing instead of always beginning to check for free nodes from node 0. This will result in a placement of the huge pages near the executing processor improving performance. The existing implementation can place the huge pages far away from the executing processor causing significant degradation of performance. The search starting from zero also means that the lower zones quickly run out of memory. Selecting a huge page near the process distributed the huge pages better. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Adam Litke <agl@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
Implement copy-on-write support for hugetlb mappings so MAP_PRIVATE can be supported. This helps us to safely use hugetlb pages in many more applications. The patch makes the following changes. If needed, I also have it broken out according to the following paragraphs. 1. Add a pair of functions to set/clear write access on huge ptes. The writable check in make_huge_pte is moved out to the caller for use by COW later. 2. Hugetlb copy-on-write requires special case handling in the following situations: - copy_hugetlb_page_range() - Copied pages must be write protected so a COW fault will be triggered (if necessary) if those pages are written to. - find_or_alloc_huge_page() - Only MAP_SHARED pages are added to the page cache. MAP_PRIVATE pages still need to be locked however. 3. Provide hugetlb_cow() and calls from hugetlb_fault() and hugetlb_no_page() which handles the COW fault by making the actual copy. 4. Remove the check in hugetlbfs_file_map() so that MAP_PRIVATE mmaps will be allowed. Make MAP_HUGETLB exempt from the depricated VM_RESERVED mapping check. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAdam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adam Litke 提交于
This patch splits the "no_page()" type activity into its own function, hugetlb_no_page(). hugetlb_fault() becomes the entry point for hugetlb faults and delegates to the appropriate handler depending on the type of fault. Right now we still have only hugetlb_no_page() but a later patch introduces a COW fault. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAdam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adam Litke 提交于
find_lock_huge_page() isn't a great name, since it does extra things not analagous to find_lock_page(). Rename it find_or_alloc_huge_page() which is closer to the mark. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAdam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adam Litke 提交于
cleanup Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAdam Litke <agl@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Badari Pulavarty 提交于
Here is the patch to implement madvise(MADV_REMOVE) - which frees up a given range of pages & its associated backing store. Current implementation supports only shmfs/tmpfs and other filesystems return -ENOSYS. "Some app allocates large tmpfs files, then when some task quits and some client disconnect, some memory can be released. However the only way to release tmpfs-swap is to MADV_REMOVE". - Andrea Arcangeli Databases want to use this feature to drop a section of their bufferpool (shared memory segments) - without writing back to disk/swap space. This feature is also useful for supporting hot-plug memory on UML. Concerns raised by Andrew Morton: - "We have no plan for holepunching! If we _do_ have such a plan (or might in the future) then what would the API look like? I think sys_holepunch(fd, start, len), so we should start out with that." - Using madvise is very weird, because people will ask "why do I need to mmap my file before I can stick a hole in it?" - None of the other madvise operations call into the filesystem in this manner. A broad question is: is this capability an MM operation or a filesytem operation? truncate, for example, is a filesystem operation which sometimes has MM side-effects. madvise is an mm operation and with this patch, it gains FS side-effects, only they're really, really significant ones." Comments: - Andrea suggested the fs operation too but then it's more efficient to have it as a mm operation with fs side effects, because they don't immediatly know fd and physical offset of the range. It's possible to fixup in userland and to use the fs operation but it's more expensive, the vmas are already in the kernel and we can use them. Short term plan & Future Direction: - We seem to need this interface only for shmfs/tmpfs files in the short term. We have to add hooks into the filesystem for correctness and completeness. This is what this patch does. - In the future, plan is to support both fs and mmap apis also. This also involves (other) filesystem specific functions to be implemented. - Current patch doesn't support VM_NONLINEAR - which can be addressed in the future. Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrea Arcangeli <andrea@suse.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-