- 28 12月, 2011 27 次提交
-
-
由 Jan Engelhardt 提交于
Use the new macro and struct names in xt_ecn.h, and put the old definitions into a definition-forwarding ipt_ecn.h. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Jan Engelhardt 提交于
Prepare the ECN match for augmentation by an IPv6 counterpart. Since no symbol dependencies to ipv6.ko are added, having a single ecn match module is the more so welcome. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Joshua Kinard 提交于
SGI IP32 (O2)'s ethernet driver (meth) lacks a set_rx_mode function, which prevents IPv6 from working completely because any ICMPv6 neighbor solicitation requests aren't picked up by the driver. So the machine can ping out and connect to other systems, but other systems will have a very hard time connecting to the O2. Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiko Carstens 提交于
Fix allyesconfig build on architectures without IOMEM: drivers/net/ethernet/calxeda/xgmac.c:1800:2: error: implicit declaration of function 'iounmap' [-Werror=implicit-function-declaration] Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Rob Herring <rob.herring@calxeda.com> Acked-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Migrates the buf_seqno() helper routine from broadcast link level to unicast link level so that it can be used both types of TIPC links. This is a cosmetic change only, and does not affect the operation of TIPC. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Adds checks to TIPC's broadcast link so that it ignores any acknowledgement message containing a sequence number that does not correspond to an unacknowledged message currently in the broadcast link's transmit queue. This change prevents the broadcast link from becoming stalled if a newly booted node receives stale broadcast link acknowledgement information from another node that has not yet fully synchronized its end of the broadcast link to reflect the current state of the new node's end. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Adds code to release any unsent broadcast messages in the broadcast link transmit queue if TIPC loses contact with its only neighboring node. Previously, a broadcast link that was in the congested state would hold on to the unsent messages, even though the messages were now undeliverable. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
The two broadcast link statistics fields that are used to derive the average length of that link's transmit queue are now updated only after a successful attempt to send a broadcast message, since there is no need to update these values when an unsuccessful send attempt leaves the queue unchanged. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Adds a check to detect when an attempt is made to send a message via the broadcast link and no neighboring nodes are currently available to receive it. Rather than wasting effort passing the message to the broadcast link and broadcast bearer, who will only throw it away, TIPC now frees the message immediately and reports success (i.e. the message has been delivered to all available destinations). Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Fixes oversight that allowed broadcast link node map to be updated without first taking the broadcast link spinlock that protects the map. As part of this fix the node map has been incorporated into the broadcast link structure to make the need for such protection more evident. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Creates global variables to hold the broadcast link's pseudo-bearer and pseudo-link structures, rather than allocating them dynamically. There is only a single instance of each structure, and changing over to static allocation allows elimination of code to handle the cases where dynamic allocation was unsuccessful. The memset in the teardown code may look like they aren't used, but the same teardown code is run when there is a non-fatal error at init-time, so that stale data isn't present when the user fixes the cause of the soft error. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Gets rid of an unnecessary check in the routine that updates the port id of a node's name publications when the node is assigned a network address, since the routine is only invoked if the new address is different from the existing one. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Modifies TIPC's module unloading logic to switch itself into "single node" mode before starting to terminate networking support. This helps to ensure that no operations that require TIPC to be in "networking" mode can initiate once unloading starts. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Gets rid of two pointless operations that zero out the array used to record information about TIPC's Ethernet bearers. There is no need to initialize the array on start up since it is a global variable that is already zero'd out, and there is no need to zero it out on exit because the array is never referenced again. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Modifies Ethernet bearer disable logic to break the association between the bearer and its device driver at the time the bearer is disabled, rather than when the TIPC module is unloaded. This allows the array entry used by the disabled bearer to be re-used if the same bearer (or a different one) is subsequently enabled. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Change TIPC's shutdown code to deactivate generic networking support before terminating Ethernet media support. The deactivation of generic networking support causes all existing bearers to be destroyed, meaning the Ethernet media termination routine no longer has to bother marking them as unavailable. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Comment-only change to better explain why TIPC's configuration lock is temporarily released while activating support for network interfaces, and why the existing activation code doesn't require rework. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Permits run-time alteration of default link settings on a per-media and per-bearer basis, in addition to the existing per-link basis. The following syntax can now be used: tipc-config -lt=<link-name|bearer-name|media-name>/<tolerance> tipc-config -lp=<link-name|bearer-name|media-name>/<priority> tipc-config -lw=<link-name|bearer-name|media-name>/<window> Note that changes to the default settings for a given media type has no effect on the default settings used by existing bearers. Similarly, changes to default bearer settings has no effect on existing link endpoints that utilize that interface. Thanks to Florian Westphal <fw@strlen.de> for his contributions to the development of this enhancement. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Adds a check to ensure that TIPC ignores an incoming neighbor discovery message that specifies an invalid media address as its source. The check ensures that the source address is a valid, non-broadcast address that could legally be used by a neighboring link endpoint. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Reworks TIPC's media address data structure and associated processing routines to transfer all media-specific details of address conversion to the associated TIPC media adaptation code. TIPC's generic bearer code now only needs to know which media type an address is associated with and whether or not it is a broadcast address, and totally ignores the "value" field that contains the actual media-specific addressing info. These changes eliminate the need for a number of endianness conversion operations and will make it easier for TIPC to support new media types in the future. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Enhances TIPC's Ethernet media support to provide 3 new address conversion routines, which allow TIPC to interpret an address that is in string form and to convert an address to and from the 20 byte format used in TIPC's neighbor discovery messages. These routines are pre-requisites to a follow on commit that hides all media-specific addressing details from TIPC's generic bearer code. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Enhances conversion of a media address to printable form so that an unconvertable address will be displayed as a string of hex digits, rather than not being displayed at all. (Also removes a pointless check for the existence of the media-specific address conversion routine, since the routine is not optional.) Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Simplifies error handling performed during media registration, since TIPC no longer supports the dynamic addition of new media types that are potentially error-prone. These simplifications include the following: 1) No longer check for premature registration of a new media type. 2) No longer check for negative link priority values (which was pointless since such values are unsigned, and could cause a compiler warning). 3) No longer generate a warning describing the exact cause of any registration failure (just warns that overall registration failed). Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Changes TIPC's list of registered media types from an array of media structures to an array of pointers to media structures. This eliminates the need to copy of the contents of the structure passed in during media registration. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Streamlines the detection of an attempt to register a TIPC media structure using an already registered name or type identifier. The revised logic now reuses an existing routine to detect an existing name and no longer unnecessarily manipulates the media type counter during an unsuccessful registration attempt. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Speeds up the registration of TIPC media types by passing in a structure containing the required information, rather than by passing in the various fields describing the media type individually. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Permits a Linux container to use TIPC sockets even when it has its own network namespace defined by removing the check that prohibits such use. This makes it possible for users who wish to isolate their container network traffic from normal network traffic to utilize TIPC. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 27 12月, 2011 5 次提交
-
-
由 Nicolas de Pesloüan 提交于
v2, based on Jay's review. I kept the 'link must be up' part, because this is enforced in the code. Signed-off-by: NNicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
RDBG() wasn't even used, and the messages printed by RT6_DEBUG() were far from useful. Just get rid of all this stuff, we can replace it with something more suitable if we want. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Axel Lin 提交于
Include linux/slab.h to fix below build error: CC drivers/net/ethernet/mellanox/mlx4/resource_tracker.o drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_init_resource_tracker': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:233: error: implicit declaration of function 'kzalloc' drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:234: warning: assignment makes pointer from integer without a cast drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_free_resource_tracker': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:264: error: implicit declaration of function 'kfree' drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'alloc_qp_tr': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:370: warning: assignment makes pointer from integer without a cast drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'alloc_mtt_tr': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:386: warning: assignment makes pointer from integer without a cast drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'alloc_mpt_tr': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:402: warning: assignment makes pointer from integer without a cast drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'alloc_eq_tr': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:417: warning: assignment makes pointer from integer without a cast drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'alloc_cq_tr': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:431: warning: assignment makes pointer from integer without a cast drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'alloc_srq_tr': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:446: warning: assignment makes pointer from integer without a cast drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'alloc_counter_tr': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:461: warning: assignment makes pointer from integer without a cast drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'add_res_range': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:521: warning: assignment makes pointer from integer without a cast drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mac_add_to_slave': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:1193: warning: assignment makes pointer from integer without a cast drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'add_mcg_res': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:2521: warning: assignment makes pointer from integer without a cast make[5]: *** [drivers/net/ethernet/mellanox/mlx4/resource_tracker.o] Error 1 make[4]: *** [drivers/net/ethernet/mellanox/mlx4] Error 2 make[3]: *** [drivers/net/ethernet/mellanox] Error 2 make[2]: *** [drivers/net/ethernet] Error 2 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Otherwise we leave uninitialized kernel memory in there. Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The NLA_PUT macro should accept the actual attribute length, not the amount of elements in array :( Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 12月, 2011 4 次提交
-
-
-
由 Pablo Neira Ayuso 提交于
This patch adds the match that allows to perform extended accounting. It requires the new nfnetlink_acct infrastructure. # iptables -I INPUT -p tcp --sport 80 -m nfacct --nfacct-name http-traffic # iptables -I OUTPUT -p tcp --dport 80 -m nfacct --nfacct-name http-traffic Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
We currently have two ways to account traffic in netfilter: - iptables chain and rule counters: # iptables -L -n -v Chain INPUT (policy DROP 3 packets, 867 bytes) pkts bytes target prot opt in out source destination 8 1104 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 - use flow-based accounting provided by ctnetlink: # conntrack -L tcp 6 431999 ESTABLISHED src=192.168.1.130 dst=212.106.219.168 sport=58152 dport=80 packets=47 bytes=7654 src=212.106.219.168 dst=192.168.1.130 sport=80 dport=58152 packets=49 bytes=66340 [ASSURED] mark=0 use=1 While trying to display real-time accounting statistics, we require to pool the kernel periodically to obtain this information. This is OK if the number of flows is relatively low. However, in case that the number of flows is huge, we can spend a considerable amount of cycles to iterate over the list of flows that have been obtained. Moreover, if we want to obtain the sum of the flow accounting results that match some criteria, we have to iterate over the whole list of existing flows, look for matchings and update the counters. This patch adds the extended accounting infrastructure for nfnetlink which aims to allow displaying real-time traffic accounting without the need of complicated and resource-consuming implementation in user-space. Basically, this new infrastructure allows you to create accounting objects. One accounting object is composed of packet and byte counters. In order to manipulate create accounting objects, you require the new libnetfilter_acct library. It contains several examples of use: libnetfilter_acct/examples# ./nfacct-add http-traffic libnetfilter_acct/examples# ./nfacct-get http-traffic = { pkts = 000000000000, bytes = 000000000000 }; Then, you can use one of this accounting objects in several iptables rules using the new nfacct match (which comes in a follow-up patch): # iptables -I INPUT -p tcp --sport 80 -m nfacct --nfacct-name http-traffic # iptables -I OUTPUT -p tcp --dport 80 -m nfacct --nfacct-name http-traffic The idea is simple: if one packet matches the rule, the nfacct match updates the counters. Thanks to Patrick McHardy, Eric Dumazet, Changli Gao for reviewing and providing feedback for this contribution. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Eric Dumazet 提交于
Aim of this patch is to provide full range of rps_flow_cnt on 64bit arches. Theorical limit on number of flows is 2^32 Fix some buggy RPS/RFS macros as well. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Tom Herbert <therbert@google.com> CC: Xi Wang <xi.wang@gmail.com> CC: Laurent Chavey <chavey@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 12月, 2011 4 次提交
-
-
由 Pablo Neira Ayuso 提交于
The get and zero operations have to be done in an atomic context, otherwise counters added between them will be lost. This problem was spotted by Changli Gao while discussing the nfacct infrastructure. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 David S. Miller 提交于
We can't do this without propagating the const to nlk_sk() too, otherwise: net/netlink/af_netlink.c: In function ‘netlink_is_kernel’: net/netlink/af_netlink.c:103:2: warning: passing argument 1 of ‘nlk_sk’ discards ‘const’ qualifier from pointer target type [enabled by default] net/netlink/af_netlink.c:96:36: note: expected ‘struct sock *’ but argument is of type ‘const struct sock *’ Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: net/bluetooth/l2cap_core.c Just two overlapping changes, one added an initialization of a local variable, and another change added a new local variable. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The new netem loss model is configured with nested netlink messages. This code is being overly strict about sizes, and is easily confused by padding (or possible future expansion). Also message for gemodel is incorrect. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-