- 24 10月, 2015 7 次提交
-
-
由 Arnd Bergmann 提交于
Merge tag 'sti-dt-for-v4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/dt Merge "STi DT changes for v4.4, round 2" from Maxime Coquelin: - Use STiH418's A9 PLL - Add Ethernet support to STiH407 family * tag 'sti-dt-for-v4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti: ARM: STi: DT: Add support for stih418 A9 pll ARM: dts: Enable Ethernet on STi's B2199 board ARM: dts: Enable Ethernet on STi's B2120 boards ARM: dts: Add Ethernet node to STiH407 family ARM: dts: Fix RGMII pinctrl timings
-
由 Vladimir Zapolskiy 提交于
The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: NVladimir Zapolskiy <vz@mleia.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Vladimir Zapolskiy 提交于
The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: NVladimir Zapolskiy <vz@mleia.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux由 Olof Johansson 提交于
The i.MX device tree changes for 4.4: - Add IOMUXC LPSR (Low Power State Retention) device for i.MX7D. - Add a few low power mode related devices and touch controller for i.MX6UL. - Add a number of devices for i.MX7D SDB board support, USB, Dual FEC, and eMMC5.0. - i.MX6 Boundary Devices updates: relicense under GPLv2/X11, add Okaya LCD, touch and wifi support, add new boards Nitrogen6_Lite and Nitrogen6_Max. - Enable touch screen and NAND Flash controller for a few Vybrid devices. - Some random and small updates on LS1021A and MXS support. * tag 'imx-dt-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: ls1021a: Add quirk for Erratum A009116 ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names" ARM: dts: imx6: change the core clock of spdif ARM: dts: vf-colibri: enable NAND flash controller ARM: dts: vf610twr: add NAND flash controller peripherial ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board ARM: dts: imx: add Boundary Devices Nitrogen6_Max board ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices of: Add Boundary Devices Inc. vendor prefix ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support ARM: dts: imx6dql-nitrogen6x: add touchscreen support ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel ARM: dts: vf500-colibri: Add device tree node for touchscreen support ARM: dts: i.MX35: fix cpu compatible value ARM: dts: i.MX31: fix cpu compatible value ... Signed-off-by: NOlof Johansson <olof@lixom.net>
-
https://github.com/mbgg/linux-mediatek由 Olof Johansson 提交于
Delete regulator-compatible usage in mt8135-evbp1.dts. The regualtor-compatible binding is deprecated, instead the node name is used. Mediatek timer driver supports as well mt8127, mt8135 and mt8173. Add these SOCs to the bindings list. Power domains venc and venc_lt need clocks two extra clocks to access their registers. We update the bindings documentation about this. Update SMP bindings documentation by adding support for mt6589 and mt81xx SOCs. Update mt8127.dtsi and mt8135.dtsi to enable SMP support. * tag 'v4.3-next-dts' of https://github.com/mbgg/linux-mediatek: ARM: dts: mt8127: enable basic SMP bringup for mt8127 ARM: dts: mt8135: enable basic SMP bringup for mt8135 devicetree: bindings: add new SMP enable method Mediatek SoC dt-bindings: soc: Add clocks for Mediatek SCPSYS unit dt-bindings: add more MediaTek SoC to mtk-timer binding ARM: dts: mt8135-evbp1: remove regulator-compatible usage Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'v4.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt SPDIF device nodes for the newly added driver. * tag 'v4.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock2 Square ARM: dts: rockchip: Add SPDIF transceiver for RK3288 ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock ARM: dts: rockchip: Add SPDIF transceiver for RK3188 Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'sunxi-dt-for-4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT changes for 4.4, round 2 More DT patches for 4.4, mostly with new boards coming in (CHIP, BananaPi M2, pcduino2), further consolidation for the q8-based designs and a bunch of random patches enhancing support for existing boards * tag 'sunxi-dt-for-4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (27 commits) ARM: dts: sun6i: Add a dts file for the Sinovoip BPI-M2 board ARM: dts: sun6i: Add mmc2_pins_a pinmux setting to sun6i-a31.dtsi ARM: dts: sunxi: Fix interrupt-cells for [r]pio on A23/A31/A33/A80 ARM: dts: sun8i: Add NMI interrupt controller node ARM: dts: sun6i: hummingbird: Enable AXP221 DC5LDO regulator as "vdd-cpus" ARM: dts: sun6i: hummingbird: Use axp22x.dtsi for AXP221 regulators ARM: dts: sun6i: hummingbird: Fix VDD-CPU and VDD-GPU regulator names ARM: dts: sun7i: Add regulator configuration for pcDuino v3 Nano ARM: dts: sun6i: Turn on gmac on Colombus ARM: dts: sun8i: Make et-q8-v1.6.dts a symlink to q8-tablet.dts ARM: dts: sun8i: Make ippo-q8h-v*.dts a symlink to q8-tablet.dts ARM: dts: sun8i: Add sun8i-a23-q8-tablet.dts file ARM: dts: sun5i: Add backlight node to sun5i-q8-common.dtsi ARM: dts: sunxi: Enable PWM controller on Q8 format tablets ARM: dts: sun5i: Add PWM channel 0 pinmux setting for A13/A10s ARM: dts: sun5i: Add PWM controller node for A13 / A10s ARM: sun5i: Add C.H.I.P DTS ARM: dts: sunxi: Add dtsi for AXP22x PMIC ARM: dts: sun7i: Correct USB regulators on pcDuino v3 Nano ARM: sun5i: dt: Add UART3 CTS and RTS pins ... Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 23 10月, 2015 3 次提交
-
-
git://git.infradead.org/linux-mvebu由 Olof Johansson 提交于
mvebu dt for 4.4 (part 2) - Add support for severals Armada-370-based Seagate NAS - Fix Ready NAS device tree - Modify SDHCI binding for A388-GP allowing using it on old and new version of the board * tag 'mvebu-dt-4.4-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: set SW polling as SDHCI card detection on A388-GP arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file arm: mvebu: disable unused Armada RTC on ReadyNAS 102, 104 and 2120 ARM: mvebu: add DT support for Seagate Personal Cloud ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'socfpga_for_v4.4_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA dts cleanup for v4.4 - Re-order DTS nodes into correct alphabetical order * tag 'socfpga_for_v4.4_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: sort nodes alphabetically Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'socfpga_dts_for_v4.4_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS update for v4.4, part 2 - Add the FPGA manager node * tag 'socfpga_dts_for_v4.4_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: add fpga manager Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 19 10月, 2015 30 次提交
-
-
由 Rajesh Bhagat 提交于
Add "snps,quirk-frame-length-adjustment" property to USB3 node for erratum A009116. This property provides value of GFLADJ_30MHZ for post silicon frame length adjustment. Signed-off-by: NNikhil Badola <nikhil.badola@freescale.com> Signed-off-by: NRajesh Bhagat <rajesh.bhagat@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Laurent Pinchart 提交于
The property name should be "gpio", not "gpios". Fix it. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Michael Opdenacker 提交于
Fix a typo, replacing "pinctrl-name" by "pinctrl-names" in the Phytec phyFLEX-i.MX6 Quad dtsi. Also fix a typo in the board name Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Shengjiu Wang 提交于
The correct core clock of spdif is SPDIF_GCLK, which is added to clock tree. So the dts also need to be updated. Signed-off-by: NShengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Stefan Agner 提交于
Enable NAND access by adding pinmux and NAND flash controller node to device tree. The NAND chips currently used on the Colibri VF61 requires 8-bit ECC per 512 byte page, hence specify 32-bit ECC strength per 2k page size. Reviewed-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NStefan Agner <stefan@agner.ch> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Stefan Agner 提交于
This adds the NAND flash controller (NFC) peripherial. The driver supports the SLC NAND chips found on Freescale's Vybrid Tower System Module. The Micron NAND chip on the module needs 4-bit ECC per 512 byte page. Use 24-bit ECC per 2k page, which is supported by the driver. Signed-off-by: NBill Pringlemeir <bpringlemeir@nbsps.com> Reviewed-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NStefan Agner <stefan@agner.ch> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
Based on an i.MX6 Solo with 512MB DDR3. http://boundarydevices.com/product/nitrogen6_lite/Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
Based on i.MX6 Quad with 4GB of DDR3. http://boundarydevices.com/product/nitrogen6max/Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
This patch adds the vendor prefix for Boundary Devices Inc. which is a supplier of ARM-based single board computers and System-on-Modules for the general embedded market. Website: http://boundarydevices.com/Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
This patch adds the different touchscreens that can be connected using the displays available for this board. http://boundarydevices.com/product-category/displays/Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
This patch adds support for the 7" LCD display available for Sabrelite: http://boundarydevices.com/product/7-800x480-display/ Also add label to backlight_lcd and connect it to the panel. Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Gary Bisson 提交于
This patch adds support for the 7" LCD display available for Nitrogen6x: http://boundarydevices.com/product/7-800x480-display/ Also add label to backlight_lcd and connect it to the panel. Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Sanchayan Maity 提交于
Add device tree node for touchscreen support on Colibri VF50. The touchscreen functionality on VF50 uses the ADC channels of Vybrid and some GPIOs. Also add pinctrl nodes for proper pinmux. Signed-off-by: NSanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Vladimir Zapolskiy 提交于
The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: NVladimir Zapolskiy <vz@mleia.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Vladimir Zapolskiy 提交于
The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: NVladimir Zapolskiy <vz@mleia.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Adrian Alonso 提交于
Add device tree node to support iomuxc-lpsr controller, fsl,input-sel phandle allows to get input select register base address which is shared from main iomuxc controller. Signed-off-by: NAdrian Alonso <aalonso@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Fugang Duan 提交于
Enable fec1 and fec2 for i.MX7d-sdb board. Signed-off-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Adrian Alonso 提交于
- Add imx7 SoC GPIO1 pad iomuxc settings <mux_reg conf_reg input_reg mux_mode input_val> - Fix UART input select daisy chain setting values Signed-off-by: NAdrian Alonso <aalonso@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Yuan Yao 提交于
The INA220 monitors both shunt drop and supply voltage. Signed-off-by: NYuan Yao <yao.yuan@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Alison Wang 提交于
This patch adds dma-coherent property for eTSEC nodes, so coherent DMA operations are supported. Signed-off-by: NAlison Wang <alison.wang@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Fabio Estevam 提交于
Add support for USBOTG1 and USBOTG2. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NPeter Chen <peter.chen@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Fabio Estevam 提交于
Add USB OTG and Host support. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NPeter Chen <peter.chen@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Fugang Duan 提交于
Add fec1 and fec2 nodes for i.MX7d soc. Signed-off-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Horia Geantă 提交于
Signed-off-by: NHoria Geantă <horia.geanta@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Haibo Chen 提交于
Add touch screen surpport for i.MX6UL-EVK board. Signed-off-by: NHaibo Chen <haibo.chen@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-