- 12 2月, 2007 3 次提交
-
-
由 Ben Dooks 提交于
The following patch and script moves the arch/arm/mach-s3c2410 directory into arch/arm/plat-s3c24xx for the generic core code and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files Include directory include/asm-arm/plat-s3c24xx is added for the core include files. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
In preperation for splitting the arch-s3c2410 directory up, add a CONFIG_S3C2410_GPIO instead of implicitly making the .o for CONFIG_CPU_S3C2410 and CONFIG_CPU_S3C2440 Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
In preperation for splitting the arch-s3c2410 directory up, remove the use of obj-dma-y in the Makefile and move to using CONFIG_S3C2440_DMA, CONFIG_S3C2412_DMA, etc. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 2月, 2007 8 次提交
-
-
由 Russell King 提交于
bad_mode() currently prints the mode which caused the exception, and then causes an oops dump to be printed which again displays this information (since the CPSR in the struct pt_regs is correct.) This leads to processor_modes[] being shared between traps.c and process.c with a local declaration of it. We can clean this up by moving processor_modes[] to process.c and removing the duplication, resulting in processor_modes[] becoming static. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Manfred Gruber 提交于
Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: NManfred Gruber <m.gruber@tirol.com> Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Michael-Luke Jones 提交于
This patch adds the platform resources required to support the ixp4xx-pata-cf libata driver on Avila Gateworks boards. Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Michael-Luke Jones 提交于
This patch adds support for the Gateworks Avila Network Platform in a separate set of setup files to the IXDP425. This is necessary now that a driver for the Avila CF card slot is available. It also adds support for a minor variant on the Avila board known as the Loft, which has a different number of maximum PCI devices. Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Michael-Luke Jones 提交于
This patch removes references to the Gateworks Avila Network Platform in the ixdp425 setup code. Avila setup should occur separately now that a CF ATA device driver is available. Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Add the glue for ARM11 SMP oprofile support, which also supports the performance monitor in the coherency unit. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Add oprofile glue for ARM11 (ARMv6) oprofile support. This connects the ARM11 core profiling support to the oprofile code for uniprocessor configurations. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Add basic support for the ARM11 profiling hardware. This is shared between the ARM11 UP and ARM11 SMP oprofile support code. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 2月, 2007 1 次提交
-
-
由 Frédéric Riss 提交于
When calling into the EFI firmware, the parameters need to be passed on the stack. The recent change to use -mregparm=3 breaks x86 EFI support. This patch is needed to allow the new Intel-based Macs to suspend to ram (efi.get_time is called during the suspend phase). Signed-off-by: NFrederic Riss <frederic.riss@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 2月, 2007 2 次提交
-
-
由 John Keller 提交于
The SN Altix platform does not conform to the IOSAPIC IRQ routing model. Add code in acpi_unregister_gsi() to check if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) and return. Due to an oversight, this code was not added previously when similar code was added to acpi_register_gsi(). http://marc.theaimsgroup.com/?l=linux-acpi&m=116680983430121&w=2Signed-off-by: NJohn Keller <jpk@sgi.com> Acked-by: NLen Brown <lenb@kernel.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Magnus Damm 提交于
This patch fixes up ia64 kexec support for HP rx2620 hardware. It does this by skipping migration of already disabled irqs. This is most likely a problem on other ia64 platforms as well, but I've only been able to reproduce it on one machine so far. The full story is that handle_bad_irq() gets invoked before starting the new kernel without this patch. This seems to happen when fixup_irqs() calls generic_handle_irq() on already migrated (and disabled) irqs. So by avoiding migration of disabled irqs we stay away of handle_bad_irq(). The code has been tested on three different ia64 machines, all with good results. It is possible to trigger the same bug by offlining a processor using echo 0 > /sys/devices/system/cpu/cpuX/online. More detailed information is available in the following mail thread: http://lists.osdl.org/pipermail/fastboot/2007-January/thread.html#5774Signed-off-by: NMagnus Damm <magnus@valinux.co.jp> Acked-by: NSimon Horman <horms@verge.net.au> Acked-by: NZou, Nanhai <nanhai.zou@intel.com> Acked-by: NJay Lan <jlan@sgi.com> Acked-by: N"Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 2月, 2007 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit e4f0ae0e. It's not wrong, but it's not right either, and everybody seems to agree that the right fix is probably to do the ccr3 write after the ccr4 one (and that we also should clean it up a bit). And after that we need to really validate that all the bits that we write to ccr4 actually do work. The old 2.6.19 code was insane, and basically didn't change ccr4 at all (even though it certainly looks like it was the *intent* to do so). So let's revert the change that may fix things, just because it's not what was actually ever tested when the code was written, even if it _was_ the intent. There's a discussion on http://lkml.org/lkml/2007/1/9/63 that was started by the patch that now gets reverted, and that discussion may well contain the proper long-term fix. Suggested-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 2月, 2007 3 次提交
-
-
由 Al Viro 提交于
a) sun4d_boot_one_cpu() should be __cpuinit (called only from __cpuinit __cpu_up(), for one thing, leads to calls of __cpuinit functions for another). b) got externs in arch/sparc/kernel/smp.c to match reality. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
i386 boot/compressed/relocs checks for absolute symbols and warns about unexpected ones. If you build with modversions, you get ~2500 warnings about __crc_<symbol>. These suckers are really absolute symbols - we do _not_ want to modify them on relocation. They are generated by genksyms - EXPORT_... generates a weak alias, then genksyms produces an ld script with __crc_<symbol> = <checksum> and it's fed to ld to produce the final object file. Their only use is to match kernel and module at modprobe time; they _must_ be absolute. boot/compressed/relocs has a whitelist of known absolute symbols, but it doesn't know about __crc_... stuff. As the result, we get shitloads of false positives on any ld(1) version. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
... and having it __init is a bad idea. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 1月, 2007 4 次提交
-
-
由 Jeff Dike 提交于
Use the same signal frame alignment calculations as the underlying architecture. x86_64 appeared to do this, but the "- 8" was really subtracting 8 * sizeof(struct rt_sigframe) rather than 8 bytes. UML/i386 might have been OK, but I changed the calculation to match i386 just to be sure. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: <stable@kernel.org> Cc: Adrian Bunk <bunk@stusta.de> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: NAntoine Martin <antoine@nagafix.co.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Kconfig recognizes the end of help text by receding indentation depth. Recent patch had broken HOST_VMSPLIT_... choice in arch/um/Kconfig.i386 - all alternatives are interpreted as part of help text now. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
When the world was a simple and static place setting up irqs was easy. It sufficed to allocate a linux irq number and a find a free cpu vector we could receive that linux irq on. In those days it was a safe assumption that any allocated vector was actually in use so after one global pass through all of the vectors we would have none left. These days things are much more dynamic with interrupt controllers (in the form of MSI or MSI-X) appearing on plug in cards and linux irqs appearing and disappearing. As these irqs come and go vectors are allocated and freed, invalidating the ancient assumption that all allocated vectors stayed in use forever. So this patch modifies the vector allocator to walk through every possible vector before giving up, and to check to see if a vector is in use before assigning it. With these changes we stop leaking freed vectors and it becomes possible to allocate and free irq vectors all day long. This changed was modeled after the vector allocator on x86_64 where this limitation has already been removed. In essence we don't update the static variables that hold the position of the last vector we allocated until have successfully allocated another vector. This allows us to detect if we have completed one complete scan through all of the possible vectors. Acked-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 1月, 2007 3 次提交
-
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Reported by Robert P. J. Day <rpjday@mindspring.com>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Jan Altenberg 提交于
Signed-off-by: NJan Altenberg <jan@linutronix.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 29 1月, 2007 2 次提交
-
-
由 Ben Dooks 提交于
The S3C2412 DMA selection code has the arguments to writel() the wrong way around. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dave Jones 提交于
This workaround unnecessarily cripples functionality to work around an errata that doesn't seem possible to hit due to us using the automatic clock throttling in the p4 mcheck code. See http://lkml.org/lkml/2006/10/28/148 for complete reasoning and lack of disconsent. Signed-off-by: NDave Jones <davej@redhat.com>
-
- 28 1月, 2007 2 次提交
-
-
由 Benjamin Herrenschmidt 提交于
A stupid bug has been plaguing the sys_pciconfig_iobase on ppc64. It wasn't noticed until recently as it seems to not affect G5s but it's been causing problems running X servers on some other machines recently. The bus number matching was bogus. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add a comment to the PS3 config option to inform users that the current implementation is not yet complete. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 27 1月, 2007 8 次提交
-
-
由 David S. Miller 提交于
Mirror the logic in the sun4u handler, we have to update both registers even when we branch out to window fault fixup handling. The way it works is that if we are in etrap processing a fault already, g4/g5 holds the original fault information. If we take a window spill fault while doing etrap, then we put the window spill fault info into g4/g5 and this is what the top-level fault handler ends up processing first. Then we retry the originally faulting instruction, and process the original fault at that time. This is all necessary because of how constrained the trap registers are in these code paths. These cases trigger very rarely, so even if there is some performance implication it's doesn't happen very often. In fact the rarity is why it took so long to trigger and find this particular bug. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Woodhouse 提交于
On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Dike 提交于
This fixes UML on hosts with non-standard VM splits. We had changed the config variable that controls UML behavior on such hosts, but not propogated the change everywhere. In particular, the values of STUB_CODE and STUB_DATA relied on the old variable. I also reformatted the HOST_VMSPLIT_3G help to make it more standard. Spotted by uml@flonatel.org. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Blaisorblade <blaisorblade@yahoo.it> Cc: Pravin <shindepravin@gmail.com> Cc: <uml@flonatel.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
This patch makes x86_64 define arch_vma_name for CONFIG_IA32_EMULATION. This makes the ia32 vDSO mapping appear in /proc/PID/maps with "[vdso]" for ia32 processes, as it does on native i386. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
This patch fixes core dumps to include the vDSO vma, which is left out now. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
This patch fixes ia32 core dumps on x86_64 to include just one phdr for the vDSO vma. Currently it writes a confused format with two phdrs for the address, one without contents and one with. This patch removes the special-case core writing macros for the ia32 vDSO. Instead, it uses VM_ALWAYSDUMP in the vma. This changes core dumps so they no longer include the non-PT_LOAD phdrs from the vDSO, consistent with fixed native i386 core dumps. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
This patch fixes core dumps to include the vDSO vma, which is left out now. It removes the special-case core writing macros, which were not doing the right thing for the vDSO vma anyway. Instead, it uses VM_ALWAYSDUMP in the vma; there is no need for the fixmap page to be installed. It handles the CONFIG_COMPAT_VDSO case by making elf_core_dump use the fake vma from get_gate_vma after real vmas in the same way the /proc/PID/maps code does. This changes core dumps so they no longer include the non-PT_LOAD phdrs from the vDSO. I made the change to add them in the first place, but in turned out that nothing ever wanted them there since the advent of NT_AUXV. It's cleaner to leave them out, and just let the phdrs inside the vDSO image speak for themselves. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
I wouldn't mind if CONFIG_COMPAT_VDSO went away entirely. But if it's there, it should work properly. Currently it's quite haphazard: both real vma and fixmap are mapped, both are put in the two different AT_* slots, sysenter returns to the vma address rather than the fixmap address, and core dumps yet are another story. This patch makes CONFIG_COMPAT_VDSO disable the real vma and use the fixmap area consistently. This makes it actually compatible with what the old vdso implementation did. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 1月, 2007 3 次提交
-
-
由 Haavard Skinnemoen 提交于
Enable the Atmel MACB ethernet driver by default on ATSTK1000. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
由 Haavard Skinnemoen 提交于
Add missing EXPORT_SYMBOL(clear_page), allowing ext3 to be compiled as a module. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
由 Catalin Marinas 提交于
The current lazy saving of the VFP registers is no longer possible with thread migration on SMP. This patch implements a per-CPU vfp-state pointer and the saving of the VFP registers at every context switch. The registers restoring is still performed in a lazy way. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-