- 24 2月, 2013 40 次提交
-
-
由 Tang Chen 提交于
Since there is no way to guarentee the address of pgdat/zone is not on stack of any kernel threads or used by other kernel objects without reference counting or other symchronizing method, we cannot reset node_data and free pgdat when offlining a node. Just reset pgdat to 0 and reuse the memory when the node is online again. The problem is suggested by Kamezawa Hiroyuki. The idea is from Wen Congyang. NOTE: If we don't reset pgdat to 0, the WARN_ON in free_area_init_node() will be triggered. [akpm@linux-foundation.org: fix warning when CONFIG_NEED_MULTIPLE_NODES=n] [akpm@linux-foundation.org: fix the warning again again] Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NWen Congyang <wency@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wen Congyang 提交于
We call hotadd_new_pgdat() to allocate memory to store node_data. So we should free it when removing a node. Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NKamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
Introduce a new function try_offline_node() to remove sysfs file of node when all memory sections of this node are removed. If some memory sections of this node are not removed, this function does nothing. Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yasuaki Ishimatsu 提交于
When memory is added, we update zone's and pgdat's start_pfn and spanned_pages in __add_zone(). So we should revert them when the memory is removed. The patch adds a new function __remove_zone() to do this. Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
Currently __remove_section for SPARSEMEM_VMEMMAP does nothing. But even if we use SPARSEMEM_VMEMMAP, we can unregister the memory_section. Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
Introduce a new API vmemmap_free() to free and remove vmemmap pagetables. Since pagetable implements are different, each architecture has to provide its own version of vmemmap_free(), just like vmemmap_populate(). Note: vmemmap_free() is not implemented for ia64, ppc, s390, and sparc. [mhocko@suse.cz: fix implicit declaration of remove_pagetable] Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NJianguo Wu <wujianguo@huawei.com> Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
Search a page table about the removed memory, and clear page table for x86_64 architecture. [akpm@linux-foundation.org: make kernel_physical_mapping_remove() static] Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NJianguo Wu <wujianguo@huawei.com> Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wen Congyang 提交于
When memory is removed, the corresponding pagetables should alse be removed. This patch introduces some common APIs to support vmemmap pagetable and x86_64 architecture direct mapping pagetable removing. All pages of virtual mapping in removed memory cannot be freed if some pages used as PGD/PUD include not only removed memory but also other memory. So this patch uses the following way to check whether a page can be freed or not. 1) When removing memory, the page structs of the removed memory are filled with 0FD. 2) All page structs are filled with 0xFD on PT/PMD, PT/PMD can be cleared. In this case, the page used as PT/PMD can be freed. For direct mapping pages, update direct_pages_count[level] when we freed their pagetables. And do not free the pages again because they were freed when offlining. For vmemmap pages, free the pages and their pagetables. For larger pages, do not split them into smaller ones because there is no way to know if the larger page has been split. As a result, there is no way to decide when to split. We deal the larger pages in the following way: 1) For direct mapped pages, all the pages were freed when they were offlined. And since menmory offline is done section by section, all the memory ranges being removed are aligned to PAGE_SIZE. So only need to deal with unaligned pages when freeing vmemmap pages. 2) For vmemmap pages being used to store page_struct, if part of the larger page is still in use, just fill the unused part with 0xFD. And when the whole page is fulfilled with 0xFD, then free the larger page. [akpm@linux-foundation.org: fix typo in comment] [tangchen@cn.fujitsu.com: do not calculate direct mapping pages when freeing vmemmap pagetables] [tangchen@cn.fujitsu.com: do not free direct mapping pages twice] [tangchen@cn.fujitsu.com: do not free page split from hugepage one by one] [tangchen@cn.fujitsu.com: do not split pages when freeing pagetable pages] [akpm@linux-foundation.org: use pmd_page_vaddr()] [akpm@linux-foundation.org: fix used-uninitialised bug] Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NJianguo Wu <wujianguo@huawei.com> Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
In __remove_section(), we locked pgdat_resize_lock when calling sparse_remove_one_section(). This lock will disable irq. But we don't need to lock the whole function. If we do some work to free pagetables in free_section_usemap(), we need to call flush_tlb_all(), which need irq enabled. Otherwise the WARN_ON_ONCE() in smp_call_function_many() will be triggered. If we lock the whole sparse_remove_one_section(), then we come to this call trace: ------------[ cut here ]------------ WARNING: at kernel/smp.c:461 smp_call_function_many+0xbd/0x260() Hardware name: PRIMEQUEST 1800E ...... Call Trace: smp_call_function_many+0xbd/0x260 smp_call_function+0x3b/0x50 on_each_cpu+0x3b/0xc0 flush_tlb_all+0x1c/0x20 remove_pagetable+0x14e/0x1d0 vmemmap_free+0x18/0x20 sparse_remove_one_section+0xf7/0x100 __remove_section+0xa2/0xb0 __remove_pages+0xa0/0xd0 arch_remove_memory+0x6b/0xc0 remove_memory+0xb8/0xf0 acpi_memory_device_remove+0x53/0x96 acpi_device_remove+0x90/0xb2 __device_release_driver+0x7c/0xf0 device_release_driver+0x2f/0x50 acpi_bus_remove+0x32/0x6d acpi_bus_trim+0x91/0x102 acpi_bus_hot_remove_device+0x88/0x16b acpi_os_execute_deferred+0x27/0x34 process_one_work+0x20e/0x5c0 worker_thread+0x12e/0x370 kthread+0xee/0x100 ret_from_fork+0x7c/0xb0 ---[ end trace 25e85300f542aa01 ]--- Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yasuaki Ishimatsu 提交于
For removing memmap region of sparse-vmemmap which is allocated bootmem, memmap region of sparse-vmemmap needs to be registered by get_page_bootmem(). So the patch searches pages of virtual mapping and registers the pages by get_page_bootmem(). NOTE: register_page_bootmem_memmap() is not implemented for ia64, ppc, s390, and sparc. So introduce CONFIG_HAVE_BOOTMEM_INFO_NODE and revert register_page_bootmem_info_node() when platform doesn't support it. It's implemented by adding a new Kconfig option named CONFIG_HAVE_BOOTMEM_INFO_NODE, which will be automatically selected by memory-hotplug feature fully supported archs(currently only on x86_64). Since we have 2 config options called MEMORY_HOTPLUG and MEMORY_HOTREMOVE used for memory hot-add and hot-remove separately, and codes in function register_page_bootmem_info_node() are only used for collecting infomation for hot-remove, so reside it under MEMORY_HOTREMOVE. Besides page_isolation.c selected by MEMORY_ISOLATION under MEMORY_HOTPLUG is also such case, move it too. [mhocko@suse.cz: put register_page_bootmem_memmap inside CONFIG_MEMORY_HOTPLUG_SPARSE] [linfeng@cn.fujitsu.com: introduce CONFIG_HAVE_BOOTMEM_INFO_NODE and revert register_page_bootmem_info_node()] [mhocko@suse.cz: remove the arch specific functions without any implementation] [linfeng@cn.fujitsu.com: mm/Kconfig: move auto selects from MEMORY_HOTPLUG to MEMORY_HOTREMOVE as needed] [rientjes@google.com: fix defined but not used warning] Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NWu Jianguo <wujianguo@huawei.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NLin Feng <linfeng@cn.fujitsu.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wen Congyang 提交于
For removing memory, we need to remove page tables. But it depends on architecture. So the patch introduce arch_remove_memory() for removing page table. Now it only calls __remove_pages(). Note: __remove_pages() for some archtecuture is not implemented (I don't know how to implement it for s390). Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yasuaki Ishimatsu 提交于
When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NKamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wen Congyang 提交于
offlining memory blocks and checking whether memory blocks are offlined are very similar. This patch introduces a new function to remove redundant codes. Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NKamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yasuaki Ishimatsu 提交于
We remove the memory like this: 1. lock memory hotplug 2. offline a memory block 3. unlock memory hotplug 4. repeat 1-3 to offline all memory blocks 5. lock memory hotplug 6. remove memory(TODO) 7. unlock memory hotplug All memory blocks must be offlined before removing memory. But we don't hold the lock in the whole operation. So we should check whether all memory blocks are offlined before step6. Otherwise, kernel maybe panicked. Offlining a memory block and removing a memory device can be two different operations. Users can just offline some memory blocks without removing the memory device. For this purpose, the kernel has held lock_memory_hotplug() in __offline_pages(). To reuse the code for memory hot-remove, we repeat step 1-3 to offline all the memory blocks, repeatedly lock and unlock memory hotplug, but not hold the memory hotplug lock in the whole operation. Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wen Congyang 提交于
memory can't be offlined when CONFIG_MEMCG is selected. For example: there is a memory device on node 1. The address range is [1G, 1.5G). You will find 4 new directories memory8, memory9, memory10, and memory11 under the directory /sys/devices/system/memory/. If CONFIG_MEMCG is selected, we will allocate memory to store page cgroup when we online pages. When we online memory8, the memory stored page cgroup is not provided by this memory device. But when we online memory9, the memory stored page cgroup may be provided by memory8. So we can't offline memory8 now. We should offline the memory in the reversed order. When the memory device is hotremoved, we will auto offline memory provided by this memory device. But we don't know which memory is onlined first, so offlining memory may fail. In such case, iterate twice to offline the memory. 1st iterate: offline every non primary memory block. 2nd iterate: offline primary (i.e. first added) memory block. This idea is suggested by KOSAKI Motohiro. Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sasha Levin 提交于
Remove one redundant check of res. Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
do_mmap_pgoff() rounds up the desired size to the next PAGE_SIZE multiple, however there was no equivalent code in mm_populate(), which caused issues. This could be fixed by introduced the same rounding in mm_populate(), however I think it's preferable to make do_mmap_pgoff() return populate as a size rather than as a boolean, so we don't have to duplicate the size rounding logic in mm_populate(). Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
The vm_populate() code populates user mappings without constantly holding the mmap_sem. This makes it susceptible to racy userspace programs: the user mappings may change while vm_populate() is running, and in this case vm_populate() may end up populating the new mapping instead of the old one. In order to reduce the possibility of userspace getting surprised by this behavior, this change introduces the VM_POPULATE vma flag which gets set on vmas we want vm_populate() to work on. This way vm_populate() may still end up populating the new mapping after such a race, but only if the new mapping is also one that the user has requested (using MAP_SHARED, MAP_LOCKED or mlock) to be populated. Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
In find_extend_vma(), we don't need mlock_vma_pages_range() to verify the vma type - we know we're working with a stack. So, we can call directly into __mlock_vma_pages_range(), and remove the last make_pages_present() call site. Note that we don't use mm_populate() here, so we can't release the mmap_sem while allocating new stack pages. This is deemed acceptable, because the stack vmas grow by a bounded number of pages at a time, and these are anon pages so we don't have to read from disk to populate them. Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
After the MAP_POPULATE handling has been moved to mmap_region() call sites, the only remaining use of the flags argument is to pass the MAP_NORESERVE flag. This can be just as easily handled by do_mmap_pgoff(), so do that and remove the mmap_region() flags parameter. [akpm@linux-foundation.org: remove double parens] Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
Signed-off-by: NMichel Lespinasse <walken@google.com> Reviewed-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
When creating new mappings using the MAP_POPULATE / MAP_LOCKED flags (or with MCL_FUTURE in effect), we want to populate the pages within the newly created vmas. This may take a while as we may have to read pages from disk, so ideally we want to do this outside of the write-locked mmap_sem region. This change introduces mm_populate(), which is used to defer populating such mappings until after the mmap_sem write lock has been released. This is implemented as a generalization of the former do_mlock_pages(), which accomplished the same task but was using during mlock() / mlockall(). Signed-off-by: NMichel Lespinasse <walken@google.com> Reported-by: NAndy Lutomirski <luto@amacapital.net> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
We have many vma manipulation functions that are fast in the typical case, but can optionally be instructed to populate an unbounded number of ptes within the region they work on: - mmap with MAP_POPULATE or MAP_LOCKED flags; - remap_file_pages() with MAP_NONBLOCK not set or when working on a VM_LOCKED vma; - mmap_region() and all its wrappers when mlock(MCL_FUTURE) is in effect; - brk() when mlock(MCL_FUTURE) is in effect. Current code handles these pte operations locally, while the sourrounding code has to hold the mmap_sem write side since it's manipulating vmas. This means we're doing an unbounded amount of pte population work with mmap_sem held, and this causes problems as Andy Lutomirski reported (we've hit this at Google as well, though it's not entirely clear why people keep trying to use mlock(MCL_FUTURE) in the first place). I propose introducing a new mm_populate() function to do this pte population work after the mmap_sem has been released. mm_populate() does need to acquire the mmap_sem read side, but critically, it doesn't need to hold it continuously for the entire duration of the operation - it can drop it whenever things take too long (such as when hitting disk for a file read) and re-acquire it later on. The following patches are included - Patches 1 fixes some issues I noticed while working on the existing code. If needed, they could potentially go in before the rest of the patches. - Patch 2 introduces the new mm_populate() function and changes mmap_region() call sites to use it after they drop mmap_sem. This is inspired from Andy Lutomirski's proposal and is built as an extension of the work I had previously done for mlock() and mlockall() around v2.6.38-rc1. I had tried doing something similar at the time but had given up as there were so many do_mmap() call sites; the recent cleanups by Linus and Viro are a tremendous help here. - Patches 3-5 convert some of the less-obvious places doing unbounded pte populates to the new mm_populate() mechanism. - Patches 6-7 are code cleanups that are made possible by the mm_populate() work. In particular, they remove more code than the entire patch series added, which should be a good thing :) - Patch 8 is optional to this entire series. It only helps to deal more nicely with racy userspace programs that might modify their mappings while we're trying to populate them. It adds a new VM_POPULATE flag on the mappings we do want to populate, so that if userspace replaces them with mappings it doesn't want populated, mm_populate() won't populate those replacement mappings. This patch: Assorted small fixes. The first two are quite small: - Move check for vma->vm_private_data && !(vma->vm_flags & VM_NONLINEAR) within existing if (!(vma->vm_flags & VM_NONLINEAR)) block. Purely cosmetic. - In the VM_LOCKED case, when dropping PG_Mlocked for the over-mapped range, make sure we own the mmap_sem write lock around the munlock_vma_pages_range call as this manipulates the vma's vm_flags. Last fix requires a longer explanation. remap_file_pages() can do its work either through VM_NONLINEAR manipulation or by creating extra vmas. These two cases were inconsistent with each other (and ultimately, both wrong) as to exactly when did they fault in the newly mapped file pages: - In the VM_NONLINEAR case, new file pages would be populated if the MAP_NONBLOCK flag wasn't passed. If MAP_NONBLOCK was passed, new file pages wouldn't be populated even if the vma is already marked as VM_LOCKED. - In the linear (emulated) case, the work is passed to the mmap_region() function which would populate the pages if the vma is marked as VM_LOCKED, and would not otherwise - regardless of the value of the MAP_NONBLOCK flag, because MAP_POPULATE wasn't being passed to mmap_region(). The desired behavior is that we want the pages to be populated and locked if the vma is marked as VM_LOCKED, or to be populated if the MAP_NONBLOCK flag is not passed to remap_file_pages(). Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zlatko Calusic 提交于
Now that balance_pgdat() is slightly tidied up, thanks to more capable pgdat_balanced(), it's become obvious that pgdat_balanced() is called to check the status, then break the loop if pgdat is balanced, just to be immediately called again. The second call is completely unnecessary, of course. The patch introduces pgdat_is_balanced boolean, which helps resolve the above suboptimal behavior, with the added benefit of slightly better documenting one other place in the function where we jump and skip lots of code. Signed-off-by: NZlatko Calusic <zlatko.calusic@iskon.hr> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
These functions always return 0. Formalise this. Cc: Jason Liu <r64343@freescale.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Shaohua Li 提交于
Make madvise(MADV_WILLNEED) support swap file prefetch. If memory is swapout, this syscall can do swapin prefetch. It has no impact if the memory isn't swapout. [akpm@linux-foundation.org: fix CONFIG_SWAP=n build] [sasha.levin@oracle.com: fix BUG on madvise early failure] Signed-off-by: NShaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Targeted (hard resp soft) reclaim has traditionally tried to scan one group with decreasing priority until nr_to_reclaim (SWAP_CLUSTER_MAX pages) is reclaimed or all priorities are exhausted. The reclaim is then retried until the limit is met. This approach, however, doesn't work well with deeper hierarchies where groups higher in the hierarchy do not have any or only very few pages (this usually happens if those groups do not have any tasks and they have only re-parented pages after some of their children is removed). Those groups are reclaimed with decreasing priority pointlessly as there is nothing to reclaim from them. An easiest fix is to break out of the memcg iteration loop in shrink_zone only if the whole hierarchy has been visited or sufficient pages have been reclaimed. This is also more natural because the reclaimer expects that the hierarchy under the given root is reclaimed. As a result we can simplify the soft limit reclaim which does its own iteration. [yinghan@google.com: break out of the hierarchy loop only if nr_reclaimed exceeded nr_to_reclaim] [akpm@linux-foundation.org: use conventional comparison order] Signed-off-by: NMichal Hocko <mhocko@suse.cz> Reported-by: NYing Han <yinghan@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: NYing Han <yinghan@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sasha Levin 提交于
Switch ksm to use the new hashtable implementation. This reduces the amount of generic unrelated code in the ksm module. Signed-off-by: NSasha Levin <levinsasha928@gmail.com> Acked-by: NHugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sasha Levin 提交于
Switch hugemem to use the new hashtable implementation. This reduces the amount of generic unrelated code in the hugemem. This also removes the dymanic allocation of the hash table. The upside is that we save a pointer dereference when accessing the hashtable, but we lose 8KB if CONFIG_TRANSPARENT_HUGEPAGE is enabled but the processor doesn't support hugepages. Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Compaction uses the ALIGN macro incorrectly with the migrate scanner by adding pageblock_nr_pages to a PFN. It happened to work when initially implemented as the starting PFN was also aligned but with caching restarts and isolating in smaller chunks this is no longer always true. The impact is that the migrate scanner scans outside its current pageblock. As pfn_valid() is still checked properly it does not cause any failure and the impact of the bug is that in some cases it will scan more than necessary when it crosses a page boundary but by no more than COMPACT_CLUSTER_MAX. It is highly unlikely this is even measurable but it's still wrong so this patch addresses the problem. Signed-off-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NRik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
"mm: vmscan: save work scanning (almost) empty LRU lists" made SWAP_CLUSTER_MAX an unsigned long. Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Satoru Moriya <satoru.moriya@hds.com> Cc: Simon Jeons <simon.jeons@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
`int' is an inappropriate type for a number-of-pages counter. While we're there, use the clamp() macro. Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Satoru Moriya <satoru.moriya@hds.com> Cc: Simon Jeons <simon.jeons@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
When ex-KSM pages are faulted from swap cache, the fault handler is not capable of re-establishing anon_vma-spanning KSM pages. In this case, a copy of the page is created instead, just like during a COW break. These freshly made copies are known to be exclusive to the faulting VMA and there is no reason to go look for this page in parent and sibling processes during rmap operations. Use page_add_new_anon_rmap() for these copies. This also puts them on the proper LRU lists and marks them SwapBacked, so we can get rid of doing this ad-hoc in the KSM copy code. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NRik van Riel <riel@redhat.com> Acked-by: NHugh Dickins <hughd@google.com> Cc: Simon Jeons <simon.jeons@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Satoru Moriya <satoru.moriya@hds.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
The restart logic for when reclaim operates back to back with compaction is currently applied on the lruvec level. But this does not make sense, because the container of interest for compaction is a zone as a whole, not the zone pages that are part of a certain memory cgroup. Negative impact is bounded. For one, the code checks that the lruvec has enough reclaim candidates, so it does not risk getting stuck on a condition that can not be fulfilled. And the unfairness of hammering on one particular memory cgroup to make progress in a zone will be amortized by the round robin manner in which reclaim goes through the memory cgroups. Still, this can lead to unnecessary allocation latencies when the code elects to restart on a hard to reclaim or small group when there are other, more reclaimable groups in the zone. Move this logic to the zone level and restart reclaim for all memory cgroups in a zone when compaction requires more free pages from it. [akpm@linux-foundation.org: no need for min_t] Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NRik van Riel <riel@redhat.com> Acked-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Satoru Moriya <satoru.moriya@hds.com> Cc: Simon Jeons <simon.jeons@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Reclaim pressure balance between anon and file pages is calculated through a tuple of numerators and a shared denominator. Exceptional cases that want to force-scan anon or file pages configure the numerators and denominator such that one list is preferred, which is not necessarily the most obvious way: fraction[0] = 1; fraction[1] = 0; denominator = 1; goto out; Make this easier by making the force-scan cases explicit and use the fractionals only in case they are calculated from reclaim history. [akpm@linux-foundation.org: avoid using unintialized_var()] Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NRik van Riel <riel@redhat.com> Acked-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Satoru Moriya <satoru.moriya@hds.com> Cc: Simon Jeons <simon.jeons@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Fix comment style and elaborate on why anonymous memory is force-scanned when file cache runs low. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NRik van Riel <riel@redhat.com> Acked-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Satoru Moriya <satoru.moriya@hds.com> Cc: Simon Jeons <simon.jeons@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
A swappiness of 0 has a slightly different meaning for global reclaim (may swap if file cache really low) and memory cgroup reclaim (never swap, ever). In addition, global reclaim at highest priority will scan all LRU lists equal to their size and ignore other balancing heuristics. UNLESS swappiness forbids swapping, then the lists are balanced based on recent reclaim effectiveness. UNLESS file cache is running low, then anonymous pages are force-scanned. This (total mess of a) behaviour is implicit and not obvious from the way the code is organized. At least make it apparent in the code flow and document the conditions. It will be it easier to come up with sane semantics later. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NRik van Riel <riel@redhat.com> Reviewed-by: NSatoru Moriya <satoru.moriya@hds.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Acked-by: NMel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Simon Jeons <simon.jeons@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
In certain cases (kswapd reclaim, memcg target reclaim), a fixed minimum amount of pages is scanned from the LRU lists on each iteration, to make progress. Do not make this minimum bigger than the respective LRU list size, however, and save some busy work trying to isolate and reclaim pages that are not there. Empty LRU lists are quite common with memory cgroups in NUMA environments because there exists a set of LRU lists for each zone for each memory cgroup, while the memory of a single cgroup is expected to stay on just one node. The number of expected empty LRU lists is thus memcgs * (nodes - 1) * lru types Each attempt to reclaim from an empty LRU list does expensive size comparisons between lists, acquires the zone's lru lock etc. Avoid that. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NRik van Riel <riel@redhat.com> Acked-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Satoru Moriya <satoru.moriya@hds.com> Cc: Simon Jeons <simon.jeons@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-