- 03 2月, 2008 40 次提交
-
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
SELECT_DRIVE() is called by IDE core code in start_request() before device driver's ->do_request method. In ide-scsi case ->do_request is implemented by idescsi_do_request() which is also the only user of idescsi_issue_pc(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Use __ide_set_handler() in ide_execute_command(). While at it: * Fix whitespace damage in ide_execute_command(). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* siimage.c: use hwif->sata_scr[SATA_{ERROR,STATUS}_OFFSET] instead of SATA_{ERROR,STATUS}_REG macros. * Remove no longer needed SATA_*_REG macros. While at it: * Remove needless SATA Status register read from sil_sata_reset_poll(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* ->nice0 and ->nice2 ide_drive_t fields are always zero so remove them. * IDE_NICE_0 and IDE_NICE_2 defines from <linux/hdreg.h> are no longer used by any kernel code so cover them with #ifndef/#endif __KERNEL__. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Cache value read from the Status register in 'stat' variable in do_probe() and enable_nest(), then remove remove needless Status register reads. While at it: * Add proper KERN_* levels to printk() calls. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Un-static create_proc_ide_drives() and call it from ide_device_add_all(). While at it: * Rename create_proc_ide_drives() to ide_proc_port_register_devices(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Move hwif->present check out from ide_proc_register_port() to ide_device_add_all(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Factor out devices setup from ide_acpi_init() to ide_acpi_port_init_devices(). * Call ide_acpi_port_init_devices() in ide_device_add_all(). While at it: * Remove no longer needed 'drive' field from struct ide_acpi_drive_link. There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
These pointers are always setup in ide_acpi_init(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Factor out devices setup from init_irq() to ide_port_setup_devices(). While at it: * Do devices setup after printing port information. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Factor out adding drive to hwgroup from init_irq() to ide_add_drive_to_hwgroup(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Move hwif->rqsize init from ide_init_queue() to init_irq(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Move blk_register_region() call out from init_gendisk() to hwif_init(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
No need to initialize drive->gendev and waste memory on IDE settings for not present devices. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ->port_init_devs method to ide_hwif_t for a host specific initialization of devices on a port. Call the new method from ide_port_init_devices(). * Convert ht6560b, qd65xx and opti621 host drivers to use the new ->port_init_devs method. There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Use the same bit for IDE_HFLAG_CS5520 and IDE_HFLAG_VDMA host flags (both are used only by cs5520 host driver currently). * Add IDE_HFLAG_NO_IO32_BIT host flag and use it instead of ->no_io_32bit ide_hwif_t field. * Add IDE_HFLAG_NO_UNMASK_IRQS host flag, then convert dtc2278 and rz1000 host drivers to use it. There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Factor out code initializing devices from ide_init_port() to ide_port_init_devices(). * Call the new function from ide_device_add_all(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
bast-ide.c/ide-cs.c/delkin_cb.c: * Don't set 'restore' flag for ide_unregister() when initializing new interface. rapide.c/ide-pnp.c/ide-cs.c/ide_platform.c/au1xxx-ide.c/delkin_cb.c/scc_pata.c: * Don't set 'init_default' and 'restore' flags for ide_unregister() when removing interface. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add 'init_default' (flag for calling init_hwif_default()) and 'restore' (flag for calling ide_hwif_restore()) arguments to ide_unregister(). * Update ide_unregister() users to set 'init_default' and 'restore' flags. * No need to set 'init_default' flag in ide_register_hw() if the setup done by init_hwif_default() is going to be overridden by ide_init_port_hw(). * No need to set 'init_default' and 'restore' flags in cleanup_module(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
ide_init_port_hw() call overrides setup done by init_hwif_default(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
We check earlier for hwif->present and call ide_unregister() if necessary (after ide_unregister() hwif->present will be always cleared). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Alan Cox 提交于
Bart: - drive-by CodingStyle fixups Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Acknowledge major ide-floppy code refactoring and cleanup by bumping the driver version number. Also, remove a wrong comment. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
such as ERROR: switch and case should be at the same indent ERROR: need spaces around that '=' (ctx:VxV) ERROR: trailing statements should be on next line WARNING: no space between function name and open parenthesis '(' WARNING: printk() should include KERN_ facility level ERROR: That open brace { should be on the previous line ERROR: use tabs not spaces ERROR: do not use assignment in if condition WARNING: braces {} are not necessary for single statement blocks ERROR: need space after that ',' (ctx:VxV) WARNING: line over 80 characters ERROR: do not use assignment in if condition ... and so on. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-