- 07 1月, 2012 1 次提交
-
-
由 Myron Stowe 提交于
The 'latency timer' of PCI devices, both Type 0 and Type 1, is setup in architecture-specific code [see: 'pcibios_set_master()']. There are two approaches being taken by all the architectures - check if the 'latency timer' is currently set between 16 and 255 and if not bring it within bounds, or, do nothing (and then there is the gratuitously different PA-RISC implementation). There is nothing architecture-specific about PCI's 'latency timer' so this patch pulls its setup functionality up into the PCI core by creating a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over-ridden by architecture-specific code. No functional change. Signed-off-by: NMyron Stowe <myron.stowe@redhat.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 14 11月, 2011 2 次提交
-
-
由 Lars-Peter Clausen 提交于
Commit 8dc7a9c8 ("blackfin: Add export.h to files using EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into sections protected by an unrelated #if CONFIG_... statement. This can cause, depending on the configuration used, warnings like this one: arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declaration This patch fixes it by moving the includes out of the #if protected sections. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips, so move the values to the platform resources. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
- 01 11月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
Its presence was implicit everywhere, but we are aiming to fix that, so call out the users explicitly. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Paul Gortmaker 提交于
These particular files were just assuming that module.h was somehow in the include paths. Give them the more minimalist header file explicitly. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 26 10月, 2011 15 次提交
-
-
由 Yong Zhang 提交于
This flag is a NOOP and can be removed now. Signed-off-by: NYong Zhang <yong.zhang0@gmail.com> Acked-by: NBob Liu <lliubbo@kernel.org> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Michael Hennerich 提交于
Remove i2c_board_info for driver that doesn't exist anymore. Delete irq_flags for drivers that don't use them anymore. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Paul Bolle 提交于
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Lars-Peter Clausen 提交于
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Lars-Peter Clausen 提交于
There is already an entry in the spi device table for the codec, but the modalias was wrong. Also the config symbol name for the codec is wrong, so this is fixed as well. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Lars-Peter Clausen 提交于
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
This header was being rewritten while the asm-generic kbuild support was in flight, so it missed out on the update. Punt the stub and use the kbuild now that everything has settled. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Scott Jiang 提交于
SND_BF5XX_SOC is for machine drivers while SND_SOC is for codec drivers. Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Scott Jiang 提交于
The ASoC codec name is "ad1836" and not "ad183x" as the change to rename things ultimately did not get merged. Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Sonic Zhang 提交于
__kfree_rcu() in rcupdate.h bugs when parameter offset is not a constant at compile time. Since we build the kgdb_test module with -O0 and it includes this header file, we hit the bug. So drop the -O0 and mark the one func we need for the test as noinline (so we can set a breakpoint on it and have it be hit). Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mikhail Gruzdev 提交于
Fix argument types for copy_to_user. Fix following sparse warnings: arch/blackfin/include/asm/uaccess.h:198:14: warning: incorrect type in argument 2 (different address spaces) arch/blackfin/include/asm/uaccess.h:198:14: expected void const *s arch/blackfin/include/asm/uaccess.h:198:14: got void const [noderef] <asn:1>*from arch/blackfin/include/asm/uaccess.h:208:14: warning: incorrect type in argument 2 (different address spaces) arch/blackfin/include/asm/uaccess.h:208:14: expected void const *s arch/blackfin/include/asm/uaccess.h:208:14: got void const [noderef] <asn:1>*from Signed-off-by: NMikhail Gruzdev <michail.gruzdev@gmail.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Steven Miao 提交于
Make sure our smp_send_reschedule() implementation matches the scheduler_ipi() callback so that it can kick the idle cpu. Signed-off-by: NSteven Miao <realmz6@gmail.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Thomas Gleixner 提交于
IRQF_SHARED is not part of the IORESOURCE_IRQ bits. It's expressed by IORESOURCE_IRQ_SHAREABLE. IORESOURCE_IRQ_HIGHEDGE and IRQF_TRIGGER_HIGH are contradicting values, an interrupt can hardly be configured for both level and edge at the same time. This was introduced in commit 45138439(Blackfin arch: flash memory map and dm9000 resources updating) of course without any hint in the changelog what the heck this is supposed to do. Acked-by: NJavier Herrero <jherrero@hvsistemas.es> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Now that common code supports SMP systems, switch our SMP atomic logic over to it to avoid code duplication. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 27 8月, 2011 1 次提交
-
-
由 NeilBrown 提交于
The nfsservctl system call is now gone, so we should remove all linkage for it. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 7月, 2011 4 次提交
-
-
由 Arun Sharma 提交于
After changing all consumers of atomics to include <linux/atomic.h>, we ran into some compile time errors due to this dependency chain: linux/atomic.h -> asm/atomic.h -> asm-generic/atomic-long.h where atomic-long.h could use funcs defined later in linux/atomic.h without a prototype. This patches moves the code that includes asm-generic/atomic*.h to linux/atomic.h. Archs that need <asm-generic/atomic64.h> need to select CONFIG_GENERIC_ATOMIC64 from now on (some of them used to include it unconditionally). Compile tested on i386 and x86_64 with allnoconfig. Signed-off-by: NArun Sharma <asharma@fb.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arun Sharma 提交于
This is in preparation for more generic atomic primitives based on __atomic_add_unless. Signed-off-by: NArun Sharma <asharma@fb.com> Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arun Sharma 提交于
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: NArun Sharma <asharma@fb.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Frysinger 提交于
[ poleg@redhat.com: no need to declare show_regs() in ptrace.h, sched.h does this ] Signed-off-by: NMike Frysinger <vapier@gentoo.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 7月, 2011 1 次提交
-
-
由 Jonas Bonn 提交于
This patch removes all the module loader hook implementations in the architecture specific code where the functionality is the same as that now provided by the recently added default hooks. Signed-off-by: NJonas Bonn <jonas@southpole.se> Acked-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Tested-by: NMichal Simek <monstr@monstr.eu> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 23 7月, 2011 14 次提交
-
-
由 Scott Jiang 提交于
The pcm driver name has been changed, but the device name has not. Signed-off-by: NScott Jiang <scott.jiang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
No one uses this func, so just punt it. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Steven Rostedt 提交于
Do not trace arch_local_save_flags(), arch_local_irq_*() and friends. Although they are marked inline, gcc may still make a function out of them and add it to the pool of functions that are traced by the function tracer. This can cause undesirable results (kernel panic, triple faults, etc). Add the notrace notation to prevent them from ever being traced. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The bug in the BF526 rom when doing a software reset exists only in older silicon versions, so don't clear SWRST on newer parts. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The BF51x's alternative portmux Kconfig options were copy & pasted from the BF52x, but never tweaked to reflect it. So drop the old options as they were never used (and were simply wrong), and add the BF51x specific pieces to the Kconfig and header. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Back in commit c03c2a87, we fixed logic in the non-bf54x GPIO resume code to set the data levels properly before the direction to avoid spurious line glitches. But we missed the bf54x code paths. So add the same fix there. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
No need to reload these registers constantly since they're always available (we're not making any function calls in between). Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The Blackfin C ABI says we do not need to save/restore R0-R3 and P0-P2 as they are available as scratch registers. So don't bother. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Re-architect how we save/restore the gpio/port logic that only pertains to bf538/bf539 parts by pulling it out of the core code paths and pushing it out to bf538-specific locations. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The current save logic used in hibernation is to do a MMR load (base + offset) into a register, and then push that onto the stack. Then when restoring, pop off the stack into a register followed by a MMR store (base + offset). These use plenty of 32bit insns rather than 16bit, are pretty long winded, and full of pipeline bubbles. So, by taking advantage of MMRs that are contiguous, the multi-register push/pop insn, and register abuse, we can shrink this code considerably. When saving, the new logic does a lot of loads into the data and pointer registers before executing a single multi-register push insn. Then when restoring, we do a single multi-register pop insn followed by a lot of stores. Overall, this allows us to cut the insn count by ~30%, the code size by ~45%, and drastically reduce the register hazards that trigger bubbles in the pipeline. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
EVT0 is for emulation, EVT1 is for reset, and EVT4 is the "global int disable" region. None of these are used by software (or even hardware), so don't bother saving/restoring them when we hibernate since nothing ever uses these in Linux (the only thing they would be useful for is core-memory scratch, but that's just crazy talk). Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
This defines only get used in the hibernate code, so remove them from the global dpmc header as no one else cares. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The RETE/RETN registers are only used in emulation(JTAG) and NMI nodes, or as scratch registers, neither of which need to be saved/restored as this code doesn't execute at those core event levels. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
For parts with more than one SIC_IWR, we can optimize the writing a little bit using better Blackfin insns. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-