- 30 12月, 2009 4 次提交
-
-
由 Stefan Richter 提交于
Ben and Kristian have not been involved in maintenance of the IEEE 1394 drivers for quite some time; submitters are not required to Cc them on patches. The linux1394.org domain has been dead for a while and is no longer under control of a Linux developer. The current web site of the Linux 1394 project is http://ieee1394.wiki.kernel.org/. The classic drivers/ieee1394/ stack is now obsolete from the development point of view, though still a useful alternative in productive use. But nobody should attempt to submit style cleanup patches for it or to develop new drivers on top of this stack, hence mark its MAINTAINERS entry as Obsolete. drivers/ieee1394/raw1394*, like the rest of the old stack, does not receive bigger code changes anymore, hence shrink the MAINTAINERS database a bit by dropping raw1394's special entry. If something important and urgent is going to come up for raw1394, I will make sure that Dan will be notified of it besides via linux1394-devel. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NDan Dennedy <dan@dennedy.org> Cc: Ben Collins <ben.collins@ubuntu.com> Cc: Kristian Hoegsberg <krh@bitplanet.net>
-
由 Stefan Richter 提交于
This is a minimal change meant for the short term: Never set the ohci->use_dualbuffer flag to true. There are two reasons to do so: - Packet-per-buffer mode and dual-buffer mode do not behave the same under certain circumstances, notably if several packets are covered by a single fw_cdev_iso_packet descriptor. http://marc.info/?l=linux1394-devel&m=124965653718313 Therefore the driver stack should not silently choose one or the other mode but should leave the choice to the high-level driver (regardless if kernel driver or userspace driver). Or simply always only offer packet-per-buffer mode, since a considerable number of controllers, even current ones, does not offer dual-buffer support. - Even under circumstances where packet-per-buffer mode and dual-buffer mode behave exactly the same --- notably when used through libraw1394, libdc1394, as well as the current two kernel drivers which use isochronous reception (firewire-net and firedtv) --- we are still faced with the problem that several OHCI 1.1 controllers have bugs in dual-buffer mode. Although it looks like we have identified most of those buggy controllers by now, we cannot be quite sure about that. So, use packet-per-buffer by default from now on. This change should be followed up by a more complete solution: Either extend the in-kernel API and the userspace ABI by a choice between the two IR modes or remove all dual-buffer related code from firewire-ohci. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
If copy_from_user in an FW_CDEV_IOC_SEND_RESPONSE ioctl failed, the fw_request pointed to by the inbound_transaction_resource is no longer referenced and needs to be freed. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Clemens Ladisch 提交于
Control of more than one AV/C device at once --- e.g. camcorders, tape decks, audio devices, TV tuners --- failed or worked only unreliably, depending on driver implementation. This affected kernelspace and userspace drivers alike and was caused by firewire-core's inability to accept multiple registrations of FCP listeners. The fix allows multiple address handlers to be registered for the FCP command and response registers. When a request for these registers is received, all handlers are invoked, and the Firewire response is generated by the core and not by any handler. The cdev API does not change, i.e., userspace is still expected to send a response for FCP requests; this response is silently ignored. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changelog, rebased, whitespace)
-
- 25 12月, 2009 10 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc-2.6由 Linus Torvalds 提交于
* 'sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc-2.6: SYSCTL: Add a mutex to the page_alloc zone order sysctl SYSCTL: Print binary sysctl warnings (nearly) only once
-
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6由 Linus Torvalds 提交于
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: HWPOISON: Add PROC_FS dependency to hwpoison injector v2
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits) classmate-laptop: add support for Classmate PC ACPI devices hp-wmi: Fix two memleaks acer-wmi, msi-wmi: Remove needless DMI MODULE_ALIAS dell-wmi: do not keep driver loaded on unsupported boxes wmi: Free the allocated acpi objects through wmi_get_event_data drivers/platform/x86/acerhdf.c: check BIOS information whether it begins with string of table acerhdf: add new BIOS versions acerhdf: limit modalias matching to supported toshiba_acpi: convert to seq_file asus_acpi: convert to seq_file ACPI: do not select ACPI_DOCK from ATA_ACPI sony-laptop: enumerate rfkill devices using SN06 sony-laptop: rfkill support for newer models ACPI: fix OSC regression that caused aer and pciehp not to load MAINTAINERS: add maintainer for msi-wmi driver fujitu-laptop: fix tests of acpi_evaluate_integer() return value arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c: avoid cross-CPU interrupts by using smp_call_function_any() ACPI: processor: remove _PDC object list from struct acpi_processor ACPI: processor: change acpi_processor_set_pdc() interface ACPI: processor: open code acpi_processor_cleanup_pdc ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c ocfs2/trivial: Use proper mask for 2 places in hearbeat.c Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink. Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode? ocfs2: Use FIEMAP_EXTENT_SHARED fiemap: Add new extent flag FIEMAP_EXTENT_SHARED ocfs2: replace u8 by __u8 in ocfs2_fs.h ocfs2: explicit declare uninitialized var in user_cluster_connect() ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock() ocfs2: return -EAGAIN instead of EAGAIN in dlm ocfs2/cluster: Make fence method configurable - v2 ocfs2: Set MS_POSIXACL on remount ocfs2: Make acl use the default ocfs2: Always include ACL support
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: cyberpro: pci_request_regions needs a persistent name ARM: dma-isa: request cascade channel after registering it ARM: footbridge: trim down old ISA rtc setup ARM: fix PAGE_KERNEL ARM: Fix wrong shared bit for CPU write buffer bug test ARM: 5857/1: ARM: dmabounce: fix build ARM: 5856/1: Fix bug of uart0 platfrom data for nuc900 ARM: 5855/1: putc support for nuc900 ARM: 5854/1: fix compiling error for NUC900 ARM: 5849/1: ARMv7: fix Oprofile events count ARM: add missing include to nwflash.c ARM: Kill CONFIG_CPU_32 ARM: Convert VFP/Crunch/XscaleCP thread_release() to exit_thread() ARM: 5853/1: ARM: Fix build break on ARM v6 and v7
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: edac, pci: remove pesky debug printk amd64_edac: restrict PCI config space access amd64_edac: fix forcing module load/unload amd64_edac: make driver loading more robust amd64_edac: fix driver instance freeing amd64_edac: fix K8 chip select reporting
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Ensure all PG_dcache_dirty pages are written back. sh: mach-ecovec24: setup.c detailed correction serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx. serial: sh-sci: earlyprintk zero uartclk fix sh: Only use bl bit toggling for sleeping idle. sh: Restore bl bit toggling in idle loop. sh: Fix up MAX_DMA_CHANNELS definition when DMA is disabled. sh: dmaengine support for SH7785 sh: dmaengine support for sh7724.
-
由 Russell King 提交于
Don't pass a name pointer from the kernel stack, it will not survive and will result in corrupted /proc/iomem output. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
We can't request the cascade channel before it's been registered, so move it afterwards. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 24 12月, 2009 26 次提交
-
-
由 Russell King 提交于
This fixes a "start_kernel(): bug: interrupts were enabled early". rtc_cmos now takes care of initializing the ISA RTC and reading the current time and date from it; there's no need to repeat that here, thereby causing interrupts to be enabled too early. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
PAGE_KERNEL should not be executable; any area marked executable can be prefetched into the instruction cache. We don't want vmalloc areas to be read in this way. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Borislav Petkov 提交于
Do not spam the logs needlessly with the sole info that edac_pci_dev_parity_clear is being called. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Borislav Petkov 提交于
Do not access F2x19[0,4] on K8 since they're undefined there. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Borislav Petkov 提交于
Clear the override flag after force-loading the module. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Borislav Petkov 提交于
Currently, the module does not initialize fully when the DIMMs aren't ECC but remains still loaded. Propagate the error when no instance of the driver is properly initialized and prevent further loading. Reorganize and polish error handling in amd64_edac_init() while at it. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Borislav Petkov 提交于
Fix use-after-free errors by pushing all memory-freeing calls to the end of amd64_remove_one_instance(). Reported-by: NDarren Jenkins <darrenrjenkins@gmail.com> LKML-Reference: <1261370306.11354.52.camel@ICE-BOX> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Borislav Petkov 提交于
Fix the case when amd64_debug_display_dimm_sizes() reports only half the amount of DRAM on it because it doesn't account for when the single DCT operates in 128-bit mode and merges chip selects from different DIMMs. Reported-by: NJohannes Hirte <johannes.hirte@fem.tu-ilmenau.de> LKML-Reference: <200912112202.48173.johannes.hirte@fem.tu-ilmenau.de> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
This add supports for devices like keyboard, backlight, tablet and accelerometer. This work is supported by International Syst S/A. [randy.dunlap@oracle.com: cmpc_acpi: depends on ACPI] [akpm@linux-foundation.org: readability tweaks] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Paul Mundt 提交于
-
由 Markus Pietrek 提交于
With some of the cache rework an address aliasing optimization was added, but this managed to fail on certain mappings resulting in pages with PG_dcache_dirty set never writing back their dcache lines. This patch reverts to the earlier behaviour of simply always writing back when the dirty bit is set. Signed-off-by: NMarkus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
o remove unused define o add device name comment Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Thomas Renninger 提交于
Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Paul Mundt 提交于
ctrl_xxx() is an antiquated SH interface, while __raw_xxx is the standard API that accomplishes the same thing. As such, this converts the remaining sh-sci straggles over, which enables the driver to be wired up for ARM SH-Mobile CPUs as well. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This establishes a sensible max baud rate for the earlyprintk cases where the port's uartclk has not yet been determined. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Thomas Renninger 提交于
Now that we have WMI autoloading the DMI matching is not needed anymore. Signed-off-by: NThomas Renninger <trenn@suse.de> Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> Acked-by: NAnisse Astier <anisse@astier.eu> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Dmitry Torokhov 提交于
There is no point in having the driver loaded in memory if we fail to locate particular WMI GUID. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Acked-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Anisse Astier 提交于
These function allocate an acpi object by calling wmi_get_event_data, which then calls acpi_evaluate_object, and it is not freed afterwards. And kernel doc is fixed for parameters of wmi_get_event_data. Signed-off-by: NAnisse Astier <anisse@astier.eu> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Peter Feuerer 提交于
BIOS information is now checked whether it begins with the strings stored in the BIOS table. Previous method did a strcmp, what lead to problems if BIOS information has appended whitespaces. Signed-off-by: NPeter Feuerer <peter@piie.net> Cc: Borislav Petkov <petkovbb@gmail.com> Cc: Andreas Mohr <andi@lisas.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-