Pull audit fixes from Paul Moore:
 "After he sent the initial audit pull request for 3.18, Eric asked me
  to take over the management of the audit tree, hence this pull request
  to fix a couple of problems with audit.

  As you can see below, the changes are minimal: adding some whitespace
  to a string so userspace parses it correctly, and fixing a problem
  with audit's usage of fsnotify that was causing audit watch rules to
  be lost.  Neither of these patches were very controversial on the
  mailing lists and they fix real problems, getting them into 3.18 would
  be a good thing"

* 'stable-3.18' of git://git.infradead.org/users/pcmoore/audit:
  audit: keep inode pinned
  audit: AUDIT_FEATURE_CHANGE message format missing delimiting space

Pull device mapper fixes from Mike Snitzer:

 - stable fix for dm-thin that avoids normal IO racing with discard

 - stable fix for a dm-cache related bug in dm-btree walking code that
   results from using very large fast device (eg 4T) with a very small
   cache blocksize (eg 32K) -- this is a very uncommon configuration

 - a couple fixes for dm-raid (one for stable and the other addresses a
   crash in 3.18-rc1 code)

 - stable fix for dm-thinp that addresses a very rare dm-bufio bug
   having to do with memory reclaimation (via shrinker) when using
   dm-thinp ontop of loopback devices

 - fix a leak in dm-stripe target constructor's error path

* tag 'dm-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm btree: fix a recursion depth bug in btree walking code
  dm thin: grab a virtual cell before looking up the mapping
  dm raid: fix inaccessible superblocks causing oops in configure_discard_support
  dm raid: ensure superblock's size matches device's logical block size
  dm bufio: change __GFP_IO to __GFP_FS in shrinker callbacks
  dm stripe: fix potential for leak in stripe_ctr error path

Pull kvm fixes from Paolo Bonzini:
 "Two fixes --- one of them not exactly a one liner, but things are
  calming down on the KVM front at last"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix uninitialized op->type for some immediate values
  KVM: s390: virtio_ccw: remove unused variable

Pull Xtensa fixes from Chris Zankel:
 - fix umount syscall
 - fix ISS and xtfpga Kconfig dependencies so that more randconfigs are
   buildable
 - add seccomp, getrandom, and memfd_create syscalls
 - add defconfigs for KC705 and SMP LX200
 - implement pgprot_noncached

* tag 'xtensa-20141109' of git://github.com/czankel/xtensa-linux:
  xtensa: xtfpga: add lx200 SMP DTS and defconfig
  xtensa: xtfpga: add generic KC705 board config
  xtensa: re-wire umount syscall to sys_oldumount
  xtensa: xtfpga: only select ethoc when ethernet is available
  xtensa: add seccomp, getrandom, and memfd_create syscalls
  xtensa: ISS: add BLOCK dependency to BLK_DEV_SIMDISK
  xtensa: implement pgprot_noncached
  xtensa/uapi: Add definition of TIOC[SG]RS485

Pull crypto fixes from Herbert Xu:
 - stack corruption fix for pseries hwrng driver
 - add missing DMA unmap in caam crypto driver
 - fix NUMA crash in qat crypto driver
 - fix buggy mapping of zero-length associated data in qat crypto driver

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: pseries - port to new read API and fix stack corruption
  crypto: caam - fix missing dma unmap on error path
  crypto: qat - Enforce valid numa configuration
  crypto: qat - Prevent dma mapping zero length assoc data

Merge tag 'trace-fixes-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Rabin Vincent found a way that tracing could cause an infinite loop in
  the kernel.  The splice logic wants a full page from the ring buffer
  but the ring_buffer_wait() returns when there's any data in the ring
  buffer.  The splice code would then continue the loop waiting for a
  full page.  But if a full page never happens, the splice code will
  never sleep and just continue to loop.

  There's another case that Rabin fixed that could loop if there's no
  memory and kmalloc() constantly returns NULL"

* tag 'trace-fixes-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Do not risk busy looping in buffer splice
  tracing: Do not busy wait in buffer splice

Pull kernel argument parsing fix from Rusty Russell:
 "Nasty, stupid bug, and I've suddenly had two reports"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  param: fix crash on bad kernel arguments

Merge tag 'hwmon-for-linus-v3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 - fix PCI device ID in fam15h_power driver
 - fix suspend/resume behavior in pwm-fan driver
 - reduce logging noise created by ibmpowernv driver

* tag 'hwmon-for-linus-v3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (fam15h_power) Fix NB device ID for F16h M30h
  hwmon: (pwm-fan) Fix suspend/resume behavior
  hwmon: (ibmpowernv) Quieten when probing finds no device

Pull thermal driver fixes from Eduardo Valentin:
 "This week we have few fixes:
   - fix in IMX thermal driver to do the correct loading sequence with
     CPUfreq
   - fix in Exynos related to TMU_CONTROL offset in Exynos5260
   - fix the unit conversion in int3403"

[ Still pulling from Eduardo as Rui Zhang is on a business trip and has
  troubles with his machine ]

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  imx: thermal: imx_get_temp might be called before sensor clock is prepared
  thermal: exynos: use correct offset for TMU_CONTROL register on Exynos5260
  thermal: imx: correct driver load sequence for cpu cooling
  Thermal/int3403: Fix thermal hysteresis unit conversion

Pull MFD fixes from Lee Jones:
 - register offset fix for stmpe
 - eradicate build warning when !PM in rtsx_pcr
 - fix device ID collision when multiple boards are connected in
   viperboard
 - use correct Regmap handle - fixing unhanded IRQs in max77693
 - unmask MUIC IRQs in max77693
 - clear VBUS & CHG bits so board doesn't reboot instead of poweroff in
   twl4030

* tag 'mfd-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: twl4030-power: Fix poweroff with PM configuration enabled
  mfd: max77693: Fix always masked MUIC interrupts
  mfd: max77693: Use proper regmap for handling MUIC interrupts
  mfd: viperboard: Fix platform-device id collision
  mfd: rtsx: Fix build warnings for !PM
  mfd: stmpe: Fix STMPE24xx GPMR LSB

Pull drm fixes from Dave Airlie:
 "Radeon and i915 fixes.

  I probably should have sent these earlier, but nothing too urgent in
  them:

   - i915:
        blackscreen and corruption fixes
   - radeon:
        oops, locking and stability"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: add missing crtc unlock when setting up the MC
  drm/radeon: use gart for DMA IB tests
  drm/radeon: make sure mode init is complete in bandwidth_update
  drm/radeon: set correct CE ram size for CIK
  drm/i915: safeguard against too high minimum brightness
  drm/i915: vlv: fix gunit HW state corruption during S4 suspend
  drm/i915: Disable caches for Global GTT.

Audit rules disappear when an inode they watch is evicted from the cache.
This is likely not what we want.

The guilty commit is "fsnotify: allow marks to not pin inodes in core",
which didn't take into account that audit_tree adds watches with a zero
mask.

Adding any mask should fix this.

Fixes: 90b1e7a5 ("fsnotify: allow marks to not pin inodes in core")
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org # 2.6.36+
Signed-off-by: NPaul Moore <pmoore@redhat.com>

F3 device ID is wrongly included in fam15h_power_id_table
for F16h M30h. It should be F4 device ID. Fix this.
Signed-off-by: NAravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The state of a PWM output is not clearly defined after resume. Some PWM
drivers do not restore the duty cycle upon resume, thus it is necessary to
manually restore the correct value.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Because we build kernels with drivers built in for many platforms, it's
normal for the ibmpowernv driver to be loaded on systems that don't have
the appropriate hardware.

Currently the driver spams the log with:

  ibmpowernv ibmpowernv.0: Opal node 'sensors' not found
  ibmpowernv: Platfrom driver probe failed

But there is no error, this machine is not a powernv and doesn't have
the hardware. So change the sensors message to dev_dbg(), and only print
an error about the probe failing if it's not ENODEV.

Also fix the spelling of "Platfrom" and print the actual error value.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Currently if the user passes an invalid value on the kernel command line
then the kernel will crash during argument parsing. On most systems this
is very hard to debug because the console hasn't been initialized yet.

This is a regression due to commit 51e158c1 ("param: hand arguments
after -- straight to init") which, in response to the systemd debug
controversy, made it possible to explicitly pass arguments to init. To
achieve this parse_args() was extended from simply returning an error
code to returning a pointer. Regretably the new init args logic does not
perform a proper validity check on the pointer resulting in a crash.

This patch fixes the validity check. Should the check fail then no arguments
will be passed to init. This is reasonable and matches how the kernel treats
its own arguments (i.e. no error recovery).
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

If the read loop in trace_buffers_splice_read() keeps failing due to
memory allocation failures without reading even a single page then this
function will keep busy looping.

Remove the risk for that by exiting the function if memory allocation
failures are seen.

Link: http://lkml.kernel.org/r/1415309167-2373-2-git-send-email-rabin@rab.inSigned-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

On a !PREEMPT kernel, attempting to use trace-cmd results in a soft
lockup:

 # trace-cmd record -e raw_syscalls:* -F false
 NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61]
 ...
 Call Trace:
  [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90
  [<ffffffff81092e25>] wait_on_pipe+0x35/0x40
  [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0
  [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0
  [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40
  [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290
  [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0
  [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
  [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60
  [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
  [<ffffffff8112415d>] do_splice_to+0x6d/0x90
  [<ffffffff81126971>] SyS_splice+0x7c1/0x800
  [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8

The problem is this: tracing_buffers_splice_read() calls
ring_buffer_wait() to wait for data in the ring buffers.  The buffers
are not empty so ring_buffer_wait() returns immediately.  But
tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1,
meaning it only wants to read a full page.  When the full page is not
available, tracing_buffers_splice_read() tries to wait again with
ring_buffer_wait(), which again returns immediately, and so on.

Fix this by adding a "full" argument to ring_buffer_wait() which will
make ring_buffer_wait() wait until the writer has left the reader's
page, i.e.  until full-page reads will succeed.

Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in

Cc: stable@vger.kernel.org # 3.16+
Fixes: b1169cc6 ("tracing: Remove mock up poll wait function")
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The walk code was using a 'ro_spine' to hold it's locked btree nodes.
But this data structure is designed for the rolling lock scheme, and
as such automatically unlocks blocks that are two steps up the call
chain.  This is not suitable for the simple recursive walk algorithm,
which retraces its steps.

This code is only used by the persistent array code, which in turn is
only used by dm-cache.  In order to trigger it you need to have a
mapping tree that is more than 2 levels deep; which equates to 8-16
million cache blocks.  For instance a 4T ssd with a very small block
size of 32k only just triggers this bug.

The fix just places the locked blocks on the stack, and stops using
the ro_spine altogether.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

Commit e7cd1d1e ("mfd: twl4030-power: Add generic reset
configuration") enabled configuring the PM features for twl4030.

This caused poweroff command to fail on devices that have the
BCI charger on twl4030 wired, or have power wired for VBUS.
Instead of powering off, the device reboots. This is because
voltage is detected on charger or VBUS with the default bits
enabled for the power transition registers.

To fix the issue, let's just clear VBUS and CHG bits as we want
poweroff command to keep the system powered off.

Fixes: e7cd1d1e ("mfd: twl4030-power: Add generic reset configuration")
Cc: stable@vger.kernel.org # v3.16+
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

All interrupts coming from MUIC were ignored because interrupt source
register was masked.

The Maxim 77693 has a "interrupt source" - a separate register and interrupts
which give information about PMIC block triggering the individual
interrupt (charger, topsys, MUIC, flash LED).

By default bootloader could initialize this register to "mask all"
value. In such case (observed on Trats2 board) MUIC interrupts won't be
generated regardless of their mask status. Regmap irq chip was unmasking
individual MUIC interrupts but the source was masked

Before introducing regmap irq chip this interrupt source was unmasked,
read and acked. Reading and acking is not necessary but unmasking is.

Fixes: 342d669c ("mfd: max77693: Handle IRQs using regmap")

Cc: <stable@vger.kernel.org>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Interrupts coming from Maxim77693 MUIC block (MicroUSB Interface
Controller) were not handled at all because wrong regmap was used for
MUIC's regmap_irq_chip.

The MUIC component of Maxim 77693 uses different I2C address thus second
regmap is created and used by max77693 extcon driver. The registers for
MUIC interrupts are also in that block and should be handled by that
second regmap.

However the regmap irq chip for MUIC was configured with default regmap
which could not read MUIC registers.

Fixes: 342d669c ("mfd: max77693: Handle IRQs using regmap")

Cc: <stable@vger.kernel.org>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Allow more than one viperboard to be connected by registering with
PLATFORM_DEVID_AUTO instead of PLATFORM_DEVID_NONE.

The subdevices are currently registered with PLATFORM_DEVID_NONE, which
will cause a name collision on the platform bus when a second viperboard
is plugged in:

viperboard 1-2.4:1.0: version 0.00 found at bus 001 address 004
------------[ cut here ]------------
WARNING: CPU: 0 PID: 181 at /home/johan/work/omicron/src/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x74/0x84()
sysfs: cannot create duplicate filename '/bus/platform/devices/viperboard-gpio'
Modules linked in: i2c_viperboard viperboard netconsole [last unloaded: viperboard]
CPU: 0 PID: 181 Comm: bash Tainted: G        W      3.17.0-rc6 #1
[<c0016bf4>] (unwind_backtrace) from [<c0013860>] (show_stack+0x20/0x24)
[<c0013860>] (show_stack) from [<c04305f8>] (dump_stack+0x24/0x28)
[<c04305f8>] (dump_stack) from [<c0040fb4>] (warn_slowpath_common+0x80/0x98)
[<c0040fb4>] (warn_slowpath_common) from [<c004100c>] (warn_slowpath_fmt+0x40/0x48)
[<c004100c>] (warn_slowpath_fmt) from [<c016f1bc>] (sysfs_warn_dup+0x74/0x84)
[<c016f1bc>] (sysfs_warn_dup) from [<c016f548>] (sysfs_do_create_link_sd.isra.2+0xcc/0xd0)
[<c016f548>] (sysfs_do_create_link_sd.isra.2) from [<c016f588>] (sysfs_create_link+0x3c/0x48)
[<c016f588>] (sysfs_create_link) from [<c02867ec>] (bus_add_device+0x12c/0x1e0)
[<c02867ec>] (bus_add_device) from [<c0284820>] (device_add+0x410/0x584)
[<c0284820>] (device_add) from [<c0289440>] (platform_device_add+0xd8/0x26c)
[<c0289440>] (platform_device_add) from [<c02a5ae4>] (mfd_add_device+0x240/0x344)
[<c02a5ae4>] (mfd_add_device) from [<c02a5ce0>] (mfd_add_devices+0xb8/0x110)
[<c02a5ce0>] (mfd_add_devices) from [<bf00d1c8>] (vprbrd_probe+0x160/0x1b0 [viperboard])
[<bf00d1c8>] (vprbrd_probe [viperboard]) from [<c030c000>] (usb_probe_interface+0x1bc/0x2a8)
[<c030c000>] (usb_probe_interface) from [<c028768c>] (driver_probe_device+0x14c/0x3ac)
[<c028768c>] (driver_probe_device) from [<c02879e4>] (__driver_attach+0xa4/0xa8)
[<c02879e4>] (__driver_attach) from [<c0285698>] (bus_for_each_dev+0x70/0xa4)
[<c0285698>] (bus_for_each_dev) from [<c0287030>] (driver_attach+0x2c/0x30)
[<c0287030>] (driver_attach) from [<c030a288>] (usb_store_new_id+0x170/0x1ac)
[<c030a288>] (usb_store_new_id) from [<c030a2f8>] (new_id_store+0x34/0x3c)
[<c030a2f8>] (new_id_store) from [<c02853ec>] (drv_attr_store+0x30/0x3c)
[<c02853ec>] (drv_attr_store) from [<c016eaa8>] (sysfs_kf_write+0x5c/0x60)
[<c016eaa8>] (sysfs_kf_write) from [<c016dc68>] (kernfs_fop_write+0xd4/0x194)
[<c016dc68>] (kernfs_fop_write) from [<c010fe40>] (vfs_write+0xb4/0x1c0)
[<c010fe40>] (vfs_write) from [<c01104a8>] (SyS_write+0x4c/0xa0)
[<c01104a8>] (SyS_write) from [<c000f900>] (ret_fast_syscall+0x0/0x48)
---[ end trace 98e8603c22d65817 ]---
viperboard 1-2.4:1.0: Failed to add mfd devices to core.
viperboard: probe of 1-2.4:1.0 failed with error -17
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

rtsx_pci_power_off() is called only from rtsx_pci_suspend(), which isn't
built when PM is disabled.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The least significat byte of the GPIO value read register
on the STMPE24xx series is on addres 0xA4 not 0xA5. Correct
against datasheet and tested on the STMPE2401 hardware.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Linux 3.18-rc4

Black screen, screen corruption, hardware state corruption fixes.

* tag 'drm-intel-fixes-2014-11-07' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: safeguard against too high minimum brightness
  drm/i915: vlv: fix gunit HW state corruption during S4 suspend
  drm/i915: Disable caches for Global GTT.

Pull arm64 fixes from Catalin Marinas:
 - enable bpf syscall for compat
 - cpu_suspend fix when checking the idle state type
 - defconfig update

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: defconfig: update defconfig for 3.18
  arm64: compat: Enable bpf syscall
  arm64: psci: fix cpu_suspend to check idle state type for index

Pull ARM SoC fixes from Olof Johansson:
 "Another quiet week:

   - a fix to silence edma probe error on non-supported platforms from
     Arnd
   - a fix to enable the PL clock for Parallella, to make mainline
     usable with the SDK.
   - a somewhat verbose fix for the PLL clock tree on VF610
   - enabling of SD/MMC on one of the VF610-based boards (for testing)
   - a fix for i.MX where CONFIG_SPI used to be implicitly enabled and
     now needs to be added to the defconfig instead
   - another maintainer added for bcm2835: Lee Jones"

* tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: zynq: Enable PL clocks for Parallella
  dma: edma: move device registration to platform code
  ARM: dts: vf610: add SD node to cosmic dts
  MAINTAINERS: update bcm2835 entry
  ARM: imx: Fix the removal of CONFIG_SPI option
  ARM: imx: clk-vf610: define PLL's clock tree

Pull devicetree bugfix from Grant Likely:
 "One buffer overflow bug that shouldn't be left around"

* 'devicetree/merge' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
  of: Fix overflow bug in string property parsing functions

Pull btrfs fix from Chris Mason:
 "It's a one liner for an error cleanup path that leads to crashes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup

Merge tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are 3 tiny fixes for 3.18-rc4.

  One fixes up a long-stading race condition in the driver core for
  removing directories in /sys/devices/virtual/ and the other 2 fix up
  the wording of a new Kconfig option that was added in 3.18-rc1"

* tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
  tiny: reverse logic for DISABLE_DEV_COREDUMP
  sysfs: driver core: Fix glue dir race condition by gdp_mutex

Pull staging driver fixes from Greg KH:
 "Here are some staging/iio fixes for 3.18-rc4.

  Nothing major, just a few bugfixes of things that have been reported"

* tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging:iio:ade7758: Remove "raw" from channel name
  staging:iio:ade7758: Fix check if channels are enabled in prenable
  staging:iio:ade7758: Fix NULL pointer deref when enabling buffer
  iio: as3935: allocate correct iio_device size
  io: accel: kxcjk-1013: Fix iio_event_spec direction
  iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined
  iio: adc: mxs-lradc: Disable the clock on probe failure
  iio: st_sensors: Fix buffer copy
  staging:iio:ad5933: Drop "raw" from channel names
  staging:iio:ad5933: Fix NULL pointer deref when enabling buffer

Pull tty/serial fixes from Greg KH:
 "Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some
  reported issues"

* tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Fix pty master poll() after slave closes v2
  serial: of-serial: fix uninitialized kmalloc variable
  tty/vt: don't set font mappings on vc not supporting this
  tty: serial: 8250_mtk: Fix quot calculation
  tty: Prevent "read/write wait queue active!" log flooding
  tty: Fix high cpu load if tty is unreleaseable
  serial: Fix divide-by-zero fault in uart_get_divisor()

Pull USB fixes from Greg KH:
 "Here are some USB fixes for 3.18-rc4.

  Just a bunch of little fixes resolving reported issues and new device
  ids for existing drivers.  Full details are in the shortlog"

* tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: Update default usb-storage delay_use value in kernel-parameters.txt
  USB: cdc-acm: add quirk for control-line state requests
  phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly
  USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init()
  USB: cdc-acm: only raise DTR on transitions from B0
  Revert "storage: Replace magic number with define in usb_stor_euscsi_init()"
  usb: core: notify disconnection when core detects disconnect
  usb: core: need to call usb_phy_notify_connect after device setup
  uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models
  xhci: no switching back on non-ULT Haswell
  USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen
  USB: quirks: enable device-qualifier quirk for another Elan touchscreen
  MAINTAINERS: Remove duplicate entry for usbip driver
  usb: storage: fix build warnings !CONFIG_PM
  usb: Remove references to non-existent PLAT_S5P symbol
  uas: Add NO_ATA_1X for VIA VL711 devices
  xhci: Disable streams on Asmedia 1042 xhci controllers
  USB: HWA: fix a warning message
  uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model
  usb-storage: handle a skipped data phase
  ...

imx_get_temp might be called before the sensor clock is prepared
thus resulting in a timeout of the first attempt to read temp:
thermal thermal_zone0: failed to read out thermal zone 0
Happened to me on a Utilite Standard with IMX6 Dual SoC.

Reason is that in imx_thermal_probe thermal_zone_device_register
is called before the sensor clock is prepared.
thermal_zone_device_register however calls
thermal_zone_device_update which eventually calls imx_get_temp.

Fix this by preparing the clock before calling
thermal_zone_device_register.
Signed-off-by: NHeiner Kallweit <heiner.kallweit@web.de>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

The Parallella board comes with a U-Boot bootloader that loads one of
two predefined FPGA bitstreams before booting the kernel. Both define an
AXI interface to the on-board Epiphany processor.

Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.

Otherwise accessing, e.g., the ESYSRESET register freezes the board,
as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.

Cc: <stable@vger.kernel.org> # 3.17.x
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull i2c bugfixes from Wolfram Sang:
 "One bigger cleanup (FSF address removal) and two bugfixes for I2C"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: Dispose OF IRQ mapping at client removal time
  i2c: at91: don't account as iowait
  i2c: remove FSF address

Pull irq fixes from Thomas Gleixner:
 "Two fixlets for the armada SoC interrupt controller"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: armada-370-xp: Fix MPIC interrupt handling
  irqchip: armada-370-xp: Fix MSI interrupt handling