- 17 11月, 2007 9 次提交
-
-
由 Randy Dunlap 提交于
Fix Voyager section mismatch due to using __devinit instead of __cpuinit. WARNING: vmlinux.o(.text+0xd943): Section mismatch: reference to .init.text:init_gdt (between 'voyager_smp_prepare_boot_cpu' and 'smp_vic_cmn_interrupt') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Randy Dunlap 提交于
Fix Voyager section mismatches: voyager_cat_init() should be __init. WARNING: vmlinux.o(.text+0xee83): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xeea6): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xeeac): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xeeb2): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xef4c): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xef56): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf10f): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf13b): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf14b): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf159): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1b1): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1bb): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1c1): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1c7): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1e6): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
es7000_check_dst() contains a memcpy from 0, which probably should have been a memset. Remove it and check the retunr value from acpi_get_table_header. Noticed by: Joe Perches <joe@perches.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: return EOPNOTSUPP not ENOTSUPP
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4638/1: pxa: use PXA3xx specific macros to define clks [ARM] remove useless setting of VM_RESERVED
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix up whitespace in conservative governor. [CPUFREQ] Make cpufreq_conservative handle out-of-sync events properly [CPUFREQ] architectural pstate driver for powernow-k8
-
由 Eric Paris 提交于
ENOTSUPP is not a valid error code in the kernel (it is defined in some NFS internal error codes and has been improperly used other places). In the !CONFIG_SECURITY_SELINUX case though it is possible that we could return this from selinux_audit_rule_init(). This patch just returns the userspace valid EOPNOTSUPP. Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 eric miao 提交于
PXA3xx uses its own clk_pxa3xx_cken_ops, modify the code to use the PXA3xx specific macros to define its clocks Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 11月, 2007 31 次提交
-
-
由 Linus Torvalds 提交于
This code harks back to the days when we didn't count dirty mapped pages, which led us to try to balance the number of dirty unmapped pages by how much unmapped memory there was in the system. That makes no sense any more, since now the dirty counts include the mapped pages. Not to mention that the math doesn't work with HIGHMEM machines anyway, and causes the unmapped_ratio to potentially turn negative (which we do catch thanks to clamping it at a minimum value, but I mention that as an indication of how broken the code is). The code also was written at a time when the default dirty ratio was much larger, and the unmapped_ratio logic effectively capped that large dirty ratio a bit. Again, we've since lowered the dirty ratio rather aggressively, further lessening the point of that code. Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: Fix NULL pointer dereference in nf_nat_move_storage() [SUNHME]: VLAN support for sunhme [CHELSIO]: Fix skb->dev setting. [NETFILTER]: fix compat_nf_sockopt typo [INET]: Fix potential kfree on vmalloc-ed area of request_sock_queue [VIA_VELOCITY]: Don't oops on MTU change. iwl4965: fix not correctly dealing with hotunplug rt2x00: Fix chipset revision validation iwl3945: place CCK rates in front of OFDM for supported rates mac80211: Fix queuing of scan containing a SSID
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] N32 needs to use the compat version of sys_nfsservctl. [MIPS] irq_cpu: use handle_percpu_irq handler to avoid dropping interrupts. [MIPS] Sibyte: Fix name of clocksource. [MIPS] SNI: s/achknowledge/acknowledge/ [MIPS] Makefile: Fix canonical system names [MIPS] vpe: handle halting TCs in an errata safe way. [MIPS] Sibyte: Stop timers before programming next even. [MIPS] Sibyte: Increase minimum oneshot timer interval to two ticks. [MIPS] Lasat: Fix overlap of interrupt number ranges. [MIPS] SNI PCIT CPLUS: workaround for b0rked irq wiring of onboard PCI bus 1 [MIPS] Fix shadow register support. [MIPS] Change get_cycles to always return 0. [MIPS] Fix typo in R3000 TRACE_IRQFLAGS code [MIPS] Sibyte: Replace use of removed IO_SPACE_BASE with IOADDR. [MIPS] iounmap if in vr41xx_pciu_init() pci clock is over 33MHz [MIPS] BCM1480: Remove duplicate acknowledge of timer interrupt. [MIPS] Sibyte: pin timer interrupt to their cores. [MIPS] Qemu: Add early printk, your friend in a cold night. [MIPS] Convert reference to mem_map to pfn_to_page(). [MIPS] Sibyte: resurrect old cache hack.
-
由 Evgeniy Polyakov 提交于
Reported by Chuck Ebbert as: https://bugzilla.redhat.com/show_bug.cgi?id=259501#c14 This routine is called each time hash should be replaced, nf_conn has extension list which contains pointers to connection tracking users (like nat, which is right now the only such user), so when replace takes place it should copy own extensions. Loop above checks for own extension, but tries to move higer-layer one, which can lead to above oops. Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Poon 提交于
This patch enables VLAN support on sunhme by increasing BMAC_TXMAX/BMAC_RXMAX and allocating extra space via skb_put for the VLAN header. Signed-off-by: NChris Poon <dev-null@telus.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This matters to any sort of device that is wired to one of the CPU interrupt pins on an SMP system. Typically the scenario is most easily triggered with the count/compare timer interrupt where the same interrupt number and thus irq_desc is used on each processor. CPU A CPU B do_IRQ() generic_handle_irq() handle_level_irq() spin_lock(desc_lock) set IRQ_INPROGRESS spin_unlock(desc_lock) do_IRQ() generic_handle_irq() handle_level_irq() spin_lock(desc_lock) IRQ_INPROGRESS set => bail out spin_lock(desc_lock) clear IRQ_INPROGRESS spin_unlock(desc_lock) In case of the cp0 compare interrupt this means the interrupt will be acked and not handled or re-armed on CPU b, so there won't be any timer interrupt until the count register wraps around. With kernels 2.6.20 ... 2.6.23 we usually were lucky that things were just working right on VSMP because the count registers are synchronized on bootup so it takes something that disables interrupts for a long time on one processor to trigger this one. For scenarios where an interrupt is multicasted or broadcasted over several CPUs the existing code was safe and the fix will break it. There is no way to know in the interrupt controller code because it is abstracted from the platform code. I think we do not have such a setup currently, so this should be ok. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
The GNU `config.guess' uses "linux-gnu" as the canonical system name. Fix the list of compiler prefixes checked to spell it correctly. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Nigel Stephens 提交于
Adds a JR.HB after halting a TC, to ensure that the TC has really halted. only modifies the TCSTATUS register when the TC is safely halted. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
We have no guarantee by the generic time code that the timer is stopped when the ->next_event method is called. Modifying the Timer Initial Count register while the timer is enabled has UNPREDICTABLE effect according to the BCM1250/BCM1125/BCM1125H User Manual. So stop the timer before reprogramming. This is a paranoia fix; no ill effects have been observed previously. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
For the old minimum of a single tick a value of zero would be programmed into the init value register which in the BCM1250/BCM1125/BCM1125H User Manual in the Timer Special Cases section is documented to have UNPREDICTABLE effect. Observable sympthoms of this bug were hangs of several seconds on the console during bootup and later if both dyntick and highres timer options were activated. In theory contiguous mode of the timers is also affected but in an act of hopeless lack of realism I'll assume nobody will ever configure a KERNEL for HZ > 500kHz but if so I leave that to evolution to sort out. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
The range of MIPS_CPU IRQ and the range of LASAT IRQ overlap. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Shadow register support would not possibly have worked on multicore systems. The support code for it was also depending not on MIPS R2 but VSMP or SMTC kernels even though it makes perfect sense with UP kernels. SR sets are a scarce resource and the expected usage pattern is that users actually hardcode the register set numbers in their code. So fix the allocator by ditching it. Move the remaining CPU probe bits into the generic CPU probe. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This avoids us executing an mfc0 c0_count instruction on processors which don't have but also on certain R4000 and R4400 versions where reading from the count register just in the very moment when its value equals c0_compare will result in the timer interrupt getting lost. There is still a number of users of get_cycles remaining outside the arch code: crypto/tcrypt.c: start = get_cycles(); crypto/tcrypt.c: end = get_cycles(); crypto/tcrypt.c: start = get_cycles(); crypto/tcrypt.c: end = get_cycles(); crypto/tcrypt.c: start = get_cycles(); crypto/tcrypt.c: end = get_cycles(); drivers/char/hangcheck-timer.c: return get_cycles(); drivers/char/hangcheck-timer.c: printk("Hangcheck: Using get_cycles().\n"); drivers/char/random.c: sample.cycles = get_cycles(); drivers/input/joystick/analog.c:#define GET_TIME(x) do { x = get_cycles(); } include/linux/arcdevice.h: _x = get_cycles(); \ include/linux/arcdevice.h: _y = get_cycles(); \ mm/slub.c: if (!s->defrag_ratio || get_cycles() % 1024 > s->defrag_ratio) mm/slub.c: p += 64 + (get_cycles() & 0xff) * sizeof(void *); Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Roel Kluin 提交于
iounmap if pci clock is over 33MHz. Cosmetic because the iomap() in this case is just a bit of address magic. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Acked-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Or strange things will happen. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This was crashing the combination of highmem and sparsemem. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
The recent switch of the Sibyte SOCs from the processor specific cache managment code in c-sb1.c to c-r4k.c lost this old hack [MIPS] Hack for SB1 cache issues Removing flush_icache_page a while ago broke SB1 which was using an empty flush_data_cache_page function. This glues things well enough so a more efficient but also more intrusive solution can be found later. Signed-Off-By: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> in the hope it was no longer needed. As it turns it still is so resurrect it until there is a better solution. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Divy Le Ray 提交于
eth_type_trans() now sets skb->dev. Access skb->def after it gets set. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
It should pass opt to the ->get/->set functions, not ops. Tested-by: NLuca Tettamanti <kronos.it@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: reorder SCHED_FEAT_ bits sched: make sched_nr_latency static sched: remove activate_idle_task() sched: fix __set_task_cpu() SMP race sched: fix SCHED_FIFO tasks & FAIR_GROUP_SCHED sched: fix accounting of interrupts during guest execution on s390
-
由 Ingo Molnar 提交于
reorder SCHED_FEAT_ bits so that the used ones come first. Makes tuning instructions easier. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Adrian Bunk 提交于
sched_nr_latency can now become static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Dmitry Adamushko 提交于
cpu_down() code is ok wrt sched_idle_next() placing the 'idle' task not at the beginning of the queue. So get rid of activate_idle_task() and make use of activate_task() instead. It is the same as activate_task(), except for the update_rq_clock(rq) call that is redundant. Code size goes down: text data bss dec hex filename 47853 3934 336 52123 cb9b sched.o.before 47828 3934 336 52098 cb82 sched.o.after Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-