- 26 5月, 2010 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix incorrect unlock in nes_process_mac_intr() RDMA/nes: Async event for closed QP causes crash RDMA/nes: Have ethtool read hardware registers for rx/tx stats RDMA/cxgb4: Only insert sq qid in lookup table RDMA/cxgb4: Support IB_WR_READ_WITH_INV opcode RDMA/cxgb4: Set fence flag for inv-local-stag work requests RDMA/cxgb4: Update some HW limits RDMA/cxgb4: Don't limit fastreg page list depth RDMA/cxgb4: Return proper errors in fastreg mr/pbl allocation RDMA/cxgb4: Fix overflow bug in CQ arm RDMA/cxgb4: Optimize CQ overflow detection RDMA/cxgb4: CQ size must be IQ size - 2 RDMA/cxgb4: Register RDMA provider based on LLD state_change events RDMA/cxgb4: Detach from the LLD after unregistering RDMA device IB/ipath: Remove support for QLogic PCIe QLE devices IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters IB/mad: Make needlessly global mad_sendq_size/mad_recvq_size static IB/core: Allow device-specific per-port sysfs files mlx4_core: Clean up mlx4_alloc_icm() a bit mlx4_core: Fix possible chunk sg list overflow in mlx4_alloc_icm()
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/xilinx: Fix compile error spi/davinci: Fix clock prescale factor computation spi: move bitbang txrx utility functions to private header spi/mpc5121: Add SPI master driver for MPC5121 PSC powerpc/mpc5121: move PSC FIFO memory init to platform code spi/ep93xx: implemented driver for Cirrus EP93xx SPI controller Documentation/spi/* compile warning fix spi/omap2_mcspi: Check params before dereference or use spi/omap2_mcspi: add turbo mode support spi/omap2_mcspi: change default DMA_MIN_BYTES value to 160 spi/pl022: fix stop queue procedure spi/pl022: add support for the PL023 derivate spi/pl022: fix up differences between ARM and ST versions spi/spi_mpc8xxx: Do not use map_tx_dma to unmap rx_dma spi/spi_mpc8xxx: Fix QE mode Litte Endian spi/spi_mpc8xxx: fix potential memory corruption.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: arch/m68knommu/platform/68360/commproc.c: Checkpatch cleanup arch/m68knommu/mm/fault.c: Checkpatch cleanup m68knommu: improve short help of m68knommu/Kconfig/RAMSIZE for '0' case m68knommu: remove un-used mcfsmc.h m68knommu: add smc91x support for ColdFire NETtel boards m68knommu: add smc91x support to ColdFire 5249 platform m68knommu: remove size limit on non-MMU TASK_SIZE m68knommu: fix broken use of BUAD_TABLE_SIZE in 68328serial driver m68knommu: Coldfire QSPI platform support
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: return set_mode is same mode is requested Regulators: ab3100/bq24022: add a missing .owner field in regulator_desc twl6030: regulator: Remove vsel tables and use formula for calculation mc13783-regulator: fix vaild voltage range checking for mc13783_fixed_regulator_set_voltage regulator: use voltage number array in 88pm860x regulator: make 88pm860x sharing one driver structure regulator: simplify regulator_register() error handling regulator: fix unset_regulator_supplies() to remove all matches regulator: prevent registration of matching regulator consumer supplies regulator: Allow regulator-regulator supplies to be specified by name
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: Driver for the watchdog timer on Freescale IMX2 (and later) processors. watchdog: s3c2410_wdt - Fix on handling of the request_mem_region fail watchdog: s3c2410_wdt - Add extra option to include watchdog for Samsung SoCs iTCO_wdt: fix TCO V1 timeout values and limits watchdog: twl4030_wdt: Disable watchdog during probing watchdog: update/improve/consolidate watchdog driver watchdog: booke_wdt: fix ioctl status flags watchdog: fix several MODULE_PARM_DESC strings watchdog: bfin: use new common Blackfin watchdog header
-
由 Roland Dreier 提交于
-
由 Chien Tung 提交于
Commit ce6e74f2 ("RDMA/nes: Make nesadapter->phy_lock usage consistent") introduced a problem where phy_lock was only unlocked within an if statement and so nes_process_mac_intr() could return with phy_lock still held. Fix this. This was discovered because of the sparse warning: drivers/infiniband/hw/nes/nes_hw.c:2643:9: warning: context imbalance in 'nes_process_mac_intr' - different lock contexts for basic block Reported-by: NRoland Dreier <rdreier@cisco.com> Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 25 5月, 2010 33 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Fix permissions checking for setflags ioctl() GFS2: Don't "get" xattrs for ACLs when ACLs are turned off GFS2: Rework reclaiming unlinked dinodes
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: Ensure inode allocation buffers are fully replayed xfs: enable background pushing of the CIL xfs: forced unmounts need to push the CIL xfs: Introduce delayed logging core code xfs: Delayed logging design documentation xfs: Improve scalability of busy extent tracking xfs: make the log ticket ID available outside the log infrastructure xfs: clean up log ticket overrun debug output xfs: Clean up XFS_BLI_* flag namespace xfs: modify buffer item reference counting xfs: allow log ticket allocation to take allocation flags xfs: Don't reuse the same transaction ID for duplicated transactions.
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/battery-2.6: power_supply: Fix regression for 'type' property
-
由 Henrik Kretzschmar 提交于
This fixes a two section mismatches and makes remove() __devexit. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
We should be releasing "res->start" here. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NWan ZongShun <mcuos.com@gmail.com> Cc: Wang Qiang <rurality.linux@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Albert Herranz 提交于
Fix a problem observed while using fb_defio with a short delay on a PowerPC platform. It is possible that page_mkclean() is invoked in the deferred io work function _before_ a PTE has been marked dirty. In this case, the page is removed from the defio pagelist but page_mkclean() does not write-protect the page again. The end result is that defio ignores all subsequent writes to the page and the corresponding portions of the framebuffer never get updated. The fix consists in keeping track of the pages with non-dirty PTEs, re-checking them again on the next deferred io work iteration. Note that those pages are not passed to the defio callback as they are not written by userspace yet. Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es> Acked-by: NJaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Henrik Kretzschmar 提交于
Since the drivers probe call was changed from .init.text to .devinit.text in commit c2e13037 ("platform-drivers: move probe to .devinit.text in drivers/video") the fb_fix_screeninfo and fb_var_screeninfo structures must be changed from .init.data to .devinit.data, too. Also the drivers remove routine should be moved from .text to .devexit.text It removes these 7 section mismatch warnings from modpost: WARNING: vmlinux.o(.devinit.text+0x1e28): Section mismatch in reference from the function sgivwfb_probe() to the variable .init.data:sgivwfb_fix The function __devinit sgivwfb_probe() references a variable __initdata sgivwfb_fix. If sgivwfb_fix is only used by sgivwfb_probe then annotate sgivwfb_fix with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e50): Section mismatch in reference from the function sgivwfb_probe() to the (unknown reference) .init.data:(unknown) The function __devinit sgivwfb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by sgivwfb_probe then annotate (unknown) with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e59): Section mismatch in reference from the function sgivwfb_probe() to the (unknown reference) .init.data:(unknown) The function __devinit sgivwfb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by sgivwfb_probe then annotate (unknown) with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e60): Section mismatch in reference from the function sgivwfb_probe() to the variable .init.data:sgivwfb_fix The function __devinit sgivwfb_probe() references a variable __initdata sgivwfb_fix. If sgivwfb_fix is only used by sgivwfb_probe then annotate sgivwfb_fix with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e6a): Section mismatch in reference from the function sgivwfb_probe() to the (unknown reference) .init.data:(unknown) The function __devinit sgivwfb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by sgivwfb_probe then annotate (unknown) with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e7f): Section mismatch in reference from the function sgivwfb_probe() to the variable .init.data:sgivwfb_var1600sw The function __devinit sgivwfb_probe() references a variable __initdata sgivwfb_var1600sw. If sgivwfb_var1600sw is only used by sgivwfb_probe then annotate sgivwfb_var1600sw with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e91): Section mismatch in reference from the function sgivwfb_probe() to the variable .init.data:sgivwfb_var The function __devinit sgivwfb_probe() references a variable __initdata sgivwfb_var. If sgivwfb_var is only used by sgivwfb_probe then annotate sgivwfb_var with a matching annotation. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Henrik Kretzschmar 提交于
Since the drivers probe calls were changed from .init.text to .devinit.text in commit c2e13037 ("platform-drivers: move probe to .devinit.text in drivers/video") all the function from .init.text should be moved to .devinit.text, too. The drivers remove calls can also be move from .text to .devexit.text. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Cc: Vincent Sanders <support@simtec.co.uk> Acked-by: NArnaud Patard <arnaud.patard@rtp-net.org> Tested-by: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Henrik Kretzschmar 提交于
Since the drivers probe call was changed from .init.text to .devinit.text in commit c2e13037 ("platform-drivers: move probe to .devinit.text in drivers/video") the fb_fix_screeninfo and fb_var_screeninfo structures must be changed from .init.data to .devinit.data, too. Also the drivers remove routine should be moved from .exit.text to .devexit.text Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Grazvydas Ignotas 提交于
FBIO_WAITFORVSYNC is currently implemented by matroxfb, atyfb, intelfb and more. All of them keep redefining the same FBIO_WAITFORVSYNC macro over and over again, so move it to linux/fb.h and clean up those duplicate defines. Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Maik Broemme <mbroemme@plusserver.de> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Hiremath, Vaibhav" <hvaibhav@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Martin Ambrose 提交于
This work includes the following: - Implement handler for FBIO_WAITFORVSYNC ioctl. - Allocate the data and palette buffers separately. A consequence of this is that the palette and data loading is now done in different phases. And that the LCD must be disabled temporarily after the palette is loaded but this will only happen once after init and each time the palette is changed. I think this is OK. - Allocate two (ping and pong) framebuffers from memory. - Add pan_display handler which toggles the LCDC DMA registers between the ping and pong buffers. Signed-off-by: NMartin Ambrose <martin@ti.com> Cc: Chaithrika U S <chaithrika@ti.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Henrik Kretzschmar 提交于
Fix up the section in the w100fb driver, by moving: * w100fb_remove() from .text to .devexit.text * w100_get_xtal_table() from .text to .devinit.text * w100fb_init() from .devinit.text to .init.text Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: <stable@kernel.org> [if "platform-drivers: move probe to .devinit.text in drivers/video" was merged] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Henrik Kretzschmar 提交于
Fix up the sections in the vga16fb driver, by moving: * the variables vga16_defined and vga16fb from .init.data to .devinit.data * vga16fb_setup() from .text to .init.text * vga16fb_remove() from .text. to .devexit.text This fixes the following warnings issued by modpost: WARNING: drivers/video/built-in.o(.devinit.text+0x1a420): Section mismatch in re ference from the function vga16fb_probe() to the (unknown reference) .init.data: (unknown) The function __devinit vga16fb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by vga16fb_probe then annotate (unknown) with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x1a437): Section mismatch in reference from the function vga16fb_probe() to the variable .init.data:vga16fb_defined The function __devinit vga16fb_probe() references a variable __initdata vga16fb_defined. If vga16fb_defined is only used by vga16fb_probe then annotate vga16fb_defined with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x1a457): Section mismatch in reference from the function vga16fb_probe() to the variable .init.data:vga16fb_fix The function __devinit vga16fb_probe() references a variable __initdata vga16fb_fix. If vga16fb_fix is only used by vga16fb_probe then annotate vga16fb_fix with a matching annotation. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: <stable@kernel.org> [if "platform-drivers: move probe to .devinit.text in drivers/video" was merged] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Henrik Kretzschmar 提交于
Fix up the section in the vfb driver, by moving the variables vfb_default and vfb_fix from .init.data to .devinit.data This fixes the following warnings issued by modpost: WARNING: drivers/video/vfb.o(.devinit.text+0xf8): Section mismatch in reference from the function vfb_probe() to the variable .init.data:vfb_default The function __devinit vfb_probe() references a variable __initdata vfb_default. If vfb_default is only used by vfb_probe then annotate vfb_default with a matching annotation. WARNING: drivers/video/vfb.o(.devinit.text+0x114): Section mismatch in reference from the function vfb_probe() to the variable .init.data:vfb_fix The function __devinit vfb_probe() references a variable __initdata vfb_fix. If vfb_fix is only used by vfb_probe then annotate vfb_fix with a matching annotation. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: <stable@kernel.org> [if "platform-drivers: move probe to .devinit.text in drivers/video" was merged] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Henrik Kretzschmar 提交于
Fix up the sections in the hgafb driver, by * moving hga_default_var and hga_fix from .init.data to .devinit.data * moving hga_detect() from .init.text to .devinit.text * moving hga_fb_remove() from .text to .devexit.text This fixes the following warnings issued by modpost: WARNING: drivers/video/hgafb.o(.devinit.text+0x18): Section mismatch in referenc e from the function hgafb_probe() to the function .init.text:hga_card_detect() The function __devinit hgafb_probe() references a function __init hga_card_detect(). If hga_card_detect is only used by hgafb_probe then annotate hga_card_detect with a matching annotation. WARNING: drivers/video/hgafb.o(.devinit.text+0xfe): Section mismatch in referenc e from the function hgafb_probe() to the variable .init.data:hga_fix The function __devinit hgafb_probe() references a variable __initdata hga_fix. If hga_fix is only used by hgafb_probe then annotate hga_fix with a matching annotation. WARNING: drivers/video/hgafb.o(.devinit.text+0x105): Section mismatch in reference from the function hgafb_probe() to the variable .init.data:hga_default_var The function __devinit hgafb_probe() references a variable __initdata hga_default_var. If hga_default_var is only used by hgafb_probe then annotate hga_default_var with a matching annotation. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: <stable@kernel.org> [if "platform-drivers: move probe to .devinit.text in drivers/video" was merged] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Henrik Kretzschmar 提交于
Fix the sections in the arcfb driver, by moving: * the variables arcfb_fix and arcfb_var from .init.data to .devinit.data * arcfb_remove() from .text to .devexit.text This fixes the following warnings issued by modpost: WARNING: drivers/video/built-in.o(.devinit.text+0x543): Section mismatch in reference from the function arcfb_probe() to the variable .init.data:arcfb_var The function __devinit arcfb_probe() references a variable __initdata arcfb_var. If arcfb_var is only used by arcfb_probe then annotate arcfb_var with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x558): Section mismatch in reference from the function arcfb_probe() to the variable .init.data:arcfb_fix The function __devinit arcfb_probe() references a variable __initdata arcfb_fix. If arcfb_fix is only used by arcfb_probe then annotate arcfb_fix with a matching annotation. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: <stable@kernel.org> [if "platform-drivers: move probe to .devinit.text in drivers/video" was merged] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
These are different size buffers (40 chars vs 16), we may as well be cautious. Signed-off-by: NDan Carpenter <error27@gmail.com> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Hennerich 提交于
This lets us support the new BF527-EZKIT V2.1 via platform resources tweaks only. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Brown 提交于
Now that the WM831x core uses genirq for the IRQ controller there is no need to use the WM831x-specific wrappers to request interrupts so convert to use genirq directly. Also use more meaningful strings to make /proc/interrupts more readily legible. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
The bug is an oops when dev_get_drvdata() returned null in cmos_update_irq_enable(). The call tree looks like this: rtc_dev_ioctl() => rtc_update_irq_enable() => cmos_update_irq_enable() It's caused by a race condition in the module initialization. It is rtc_device_register() which makes the ioctl operations live so I moved the call to dev_set_drvdata() before the call to rtc_device_register(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15963Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDan Carpenter <error27@gmail.com> Tested-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Malte Schroder <maltesch@gmx.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marc Zyngier 提交于
The current ds1302 driver (or at least the one that lives in /drivers/rtc) seems to be designed for memory mapped devices only. This make it quite hard to add support for GPIO-based implementations (as this is the case for the upcoming Arcom Vulcan). This patch moves the direct register access to inline functions with explicit names. Still not as good as a proper platform driver, but at least neater. Signed-off-by: NMarc Zyngier <maz@misterjones.org> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 H Hartley Sweeten 提交于
Instead of individually creating and removing the sysfs device attribute files, wrap them in an attribute_group and use sysfs_{create/remove}_group. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Zapolskiy 提交于
On imx SoCs rtc clock parent is CKIL, but clock rate shall be determined using rtc clock itself, that eliminates CKIL clock usage in the driver. Signed-off-by: NVladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <daniel@caiaq.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Maurus Cuelenaere 提交于
Add support for the S3C64xx SoC to the generic S3C RTC driver. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Acked-by: NBen Dooks <ben-linux@fluff.org> Cc: Frans Pop <elendil@planet.nl> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in fs/smbfs/symlink.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix build error when CONFIG_MAGIC_SYSRQ is not enabled: drivers/xen/manage.c:223: error: implicit declaration of function 'handle_sysrq' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NJeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Carsten Emde 提交于
The MSR IA32_TEMPERATURE_TARGET contains the TjMax value in the newer Intel processors. Signed-off-by: NHuaxu Wan <huaxu.wan@linux.intel.com> Signed-off-by: NCarsten Emde <C.Emde@osadl.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Yong Wang <yong.y.wang@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Carsten Emde 提交于
The thermal sensors of Intel(R) CPUs can be detected by CPUID instruction, indicated by CPUID.06H.EAX[0]. Signed-off-by: NHuaxu Wan <huaxu.wan@linux.intel.com> Signed-off-by: NCarsten Emde <C.Emde@osadl.org> Reviewed-by: NValdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Yong Wang <yong.y.wang@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Thomas 提交于
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NPaul Thomas <pthomas8589@gmail.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Samu Onkalo 提交于
Set valid adjustment window (0 - 2000ms). Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Acked-by: NEric Piel <eric.piel@tremplin-utc.net> Cc: Daniel Mack <daniel@caiaq.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Samu Onkalo 提交于
Content for the 8bit device threaded interrupt handlers. Depending on the interrupt line and chip configuration, either click or wakeup / freefall handler is called. In case of click, BTN_ event is sent via input device. In case of wakeup or freefall, input device ABS_ events are updated immediatelly. It is still possible to configure interrupt line 1 for fast freefall detection and use the second line either for click or threshold based interrupts. Or both lines can be used for click / threshold interrupts. Polled input device can be set to stopped state and still get coordinate updates via input device using interrupt based method. Polled mode and interrupt mode can also be used parallel. BTN_ events are remapped based on existing axis remapping information. Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Acked-by: NEric Piel <eric.piel@tremplin-utc.net> Cc: Daniel Mack <daniel@caiaq.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Samu Onkalo 提交于
Original lis3 driver didn't provide interrupt handler(s) for click or threshold event handling. This patch adds threaded handlers for one or two interrupt lines for 8 bit device. Actual content for interrupt handling is provided in the separate patch. Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Tested-by: NDaniel Mack <daniel@caiaq.de> Acked-by: NEric Piel <eric.piel@tremplin-utc.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Samu Onkalo 提交于
8 bit device has two wakeup / free fall units. It was not possible to configure the second unit. This patch introduces configuration entry to the platform data and also corresponding changes to the 8 bit setup function. High pass filters were enabled by default. Patch introduces configuration option for high pass filter cut off frequency and also possibility to disable or enable the filter via platform data. Since the control is a new one and default state was filter enabled, new option is used to disable the filter. This way old platform data is still compatible with the change. Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Acked-by: NEric Piel <eric.piel@tremplin-utc.net> Tested-by: NDaniel Mack <daniel@caiaq.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-