- 05 11月, 2015 20 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits) fpga: socfpga: Fix check of return value of devm_request_irq lkdtm: fix ACCESS_USERSPACE test mcb: Destroy IDA on module unload mcb: Do not return zero on error path in mcb_pci_probe() mei: bus: set the device name before running fixup mei: bus: use correct lock ordering mei: Fix debugfs filename in error output char: ipmi: ipmi_ssif: Replace timeval with timespec64 fpga: zynq-fpga: Fix issue with drvdata being overwritten. fpga manager: remove unnecessary null pointer checks fpga manager: ensure lifetime with of_fpga_mgr_get fpga: zynq-fpga: Change fw format to handle bin instead of bit. fpga: zynq-fpga: Fix unbalanced clock handling misc: sram: partition base address belongs to __iomem space coresight: etm3x: adding documentation for sysFS's cpu interface vme: 8-bit status/id takes 256 values, not 255 fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager. ver_linux: proc/modules, limit text processing to 'sed' ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core updates from Greg KH: "Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch of debugfs updates, with a smattering of minor driver core fixes and updates as well. All have been in linux-next for a long time" * tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Add debugfs_create_ulong() of: to support binding numa node to specified device in devicetree debugfs: Add read-only/write-only bool file ops debugfs: Add read-only/write-only size_t file ops debugfs: Add read-only/write-only x64 file ops debugfs: Consolidate file mode checks in debugfs_create_*() Revert "mm: Check if section present during memory block (un)registering" driver-core: platform: Provide helpers for multi-driver modules mm: Check if section present during memory block (un)registering devres: fix a for loop bounds check CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit base/platform: assert that dev_pm_domain callbacks are called unconditionally sysfs: correctly handle short reads on PREALLOC attrs. base: soc: siplify ida usage kobject: move EXPORT_SYMBOL() macros next to corresponding definitions kobject: explain what kobject's sd field is debugfs: document that debugfs_remove*() accepts NULL and error values debugfs: Pass bool pointer to debugfs_create_bool() ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver updates from Greg KH: "Here's the big staging driver update for 4.4-rc1. If you were disappointed for 4.3-rc1 that we didn't contribute enough changesets, you should be happy with this pull request of over 2400 patches. But overall we removed more lines of code than we added, which is nice to see. Full details in the shortlog. All of these have been in linux-next for a while" Greg, I've never been disappointed in how few commits Staging contributes to the kernel.. Never. * tag 'staging-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2431 commits) Staging: rtl8192u: ieee80211: added missing blank lines Staging: rtl8192u: ieee80211: removed unnecessary braces Staging: rtl8192u: ieee80211: corrected block comments Staging: rtl8192u: ieee80211: corrected indent Staging: rtl8192u: ieee80211: added missing spaces after if Staging: rtl8192u: ieee80211: added missing space around '=' Staging: rtl8192u: ieee80211: fixed position of else statements Staging: rtl8192u: ieee80211: fixed open brace positions staging: rdma: ipath: Remove unneeded vairable. staging: rtl8188eu: pwrGrpCnt variable removed in store_pwrindex_offset function staging: rtl8188eu: new variable for hal_data->MCSTxPowerLevelOriginalOffset[pwrGrpCnt] in store_pwrindex_offset function staging: rtl8188eu: checkpatch fixes: 'Avoid CamelCase' in hal/bb_cfg.c staging: rtl8188eu: checkpatch fixes: line over 80 characters splited into two parts staging: rtl8188eu: checkpatch fixes: alignment should match open parenthesis staging: rtl8188eu: checkpatch fixes: unnecessary parentheses removed in hal/bb_cfg.c staging: rtl8188eu: checkpatch fixes: spaces preferred around that '|' in hal/bb_cfg.c staging: rtl8188eu: operator = replaced by += in loop increment staging: rtl8188eu: occurrence of the 5 GHz code marked staging: rtl8188eu: increment placed into for loop header staging: rtl8188eu: while loop replaced by for loop in rtw_restruct_wmm_ie ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver update for 4.4-rc1. Lots of serial driver updates and a few small tty core changes. Full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (148 commits) tty: Use unbound workqueue for all input workers tty: Abstract tty buffer work tty: Prevent tty teardown during tty_write_message() tty: core: Use correct spinlock flavor in tiocspgrp() tty: Combine SIGTTOU/SIGTTIN handling serial: amba-pl011: fix incorrect integer size in pl011_fifo_to_tty() ttyFDC: Fix build problems due to use of module_{init,exit} tty: remove unneeded return statement serial: 8250_mid: add support for DMA engine handling from UART MMIO dmaengine: hsu: remove platform data dmaengine: hsu: introduce stubs for the exported functions dmaengine: hsu: make the UART driver in control of selecting this driver serial: fix mctrl helper functions serial: 8250_pci: Intel MID UART support to its own driver serial: fsl_lpuart: add earlycon support tty: disable unbind for old 74xx based serial/mpsc console port serial: pl011: Spelling s/clocks-names/clock-names/ n_tty: Remove reader wakeups for TTY_BREAK/TTY_PARITY chars tty: synclink, fix indentation serial: at91, fix rs485 properties ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB updates from Greg KH: "Here is the big USB patchset for 4.4-rc1. As usual, most of the changes are in the gadget subsystem, and we removed a host controller for a device that is no longer in existance, and probably never was even made public. There is also other minor driver updates and new device ids, full details in the changelog. All of these have been in linux-next for a while" * tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits) USB: core: Codestyle fix in urb.c usb: misc: usb3503: Use i2c_add_driver helper macro usb: host: lpc32xx: don't unregister phy device usb: host: lpc32xx: balance clk enable/disable on removal usb: host: lpc32xx: fix warnings caused by enabling unprepared clock uwb: drp: Use setup_timer uwb: neh: Use setup_timer uwb: rsv: Use setup_timer USB: qcserial: add Sierra Wireless MC74xx/EM74xx usb: chipidea: otg: don't wait vbus drops below BSV when starts host chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE() doc: dt-binding: ci-hdrc-usb2: split vendor specific properties usb: chipidea: imx: add imx6ul usb support doc: dt-binding: ci-hdrc-usb2: improve property description usb: chipidea: imx: add usb support for imx7d Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry usb: chipidea: Add support for 'phy-clkgate-delay-us' property usb: chipidea: Use extcon framework for VBUS and ID detect usb: gadget: net2280: restore ep_cfg after defect7374 workaround usb: dwc2: host: Fix use after free w/ simultaneous irqs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper updates from Mike Snitzer: "Smaller set of DM changes for this merge. I've based these changes on Jens' for-4.4/reservations branch because the associated DM changes required it. - Revert a dm-multipath change that caused a regression for unprivledged users (e.g. kvm guests) that issued ioctls when a multipath device had no available paths. - Include Christoph's refactoring of DM's ioctl handling and add support for passing through persistent reservations with DM multipath. - All other changes are very simple cleanups" * tag 'dm-4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm switch: simplify conditional in alloc_region_table() dm delay: document that offsets are specified in sectors dm delay: capitalize the start of an delay_ctr() error message dm delay: Use DM_MAPIO macros instead of open-coded equivalents dm linear: remove redundant target name from error messages dm persistent data: eliminate unnecessary return values dm: eliminate unused "bioset" process for each bio-based DM device dm: convert ffs to __ffs dm: drop NULL test before kmem_cache_destroy() and mempool_destroy() dm: add support for passing through persistent reservations dm: refactor ioctl handling Revert "dm mpath: fix stalls when handling invalid ioctls" dm: initialize non-blk-mq queue data before queue is used
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md updates from Neil Brown: "Two major components to this update. 1) The clustered-raid1 support from SUSE is nearly complete. There are a few outstanding issues being worked on. Maybe half a dozen patches will bring this to a usable state. 2) The first stage of journalled-raid5 support from Facebook makes an appearance. With a journal device configured (typically NVRAM or SSD), the "RAID5 write hole" should be closed - a crash during degraded operations cannot result in data corruption. The next stage will be to use the journal as a write-behind cache so that latency can be reduced and in some cases throughput increased by performing more full-stripe writes. * tag 'md/4.4' of git://neil.brown.name/md: (66 commits) MD: when RAID journal is missing/faulty, block RESTART_ARRAY_RW MD: set journal disk ->raid_disk MD: kick out journal disk if it's not fresh raid5-cache: start raid5 readonly if journal is missing MD: add new bit to indicate raid array with journal raid5-cache: IO error handling raid5: journal disk can't be removed raid5-cache: add trim support for log MD: fix info output for journal disk raid5-cache: use bio chaining raid5-cache: small log->seq cleanup raid5-cache: new helper: r5_reserve_log_entry raid5-cache: inline r5l_alloc_io_unit into r5l_new_meta raid5-cache: take rdev->data_offset into account early on raid5-cache: refactor bio allocation raid5-cache: clean up r5l_get_meta raid5-cache: simplify state machine when caches flushes are not needed raid5-cache: factor out a helper to run all stripes for an I/O unit raid5-cache: rename flushed_ios to finished_ios raid5-cache: free I/O units earlier ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block reservation support from Jens Axboe: "This adds support for persistent reservations, both at the core level, as well as for sd and NVMe" [ Background from the docs: "Persistent Reservations allow restricting access to block devices to specific initiators in a shared storage setup. All implementations are expected to ensure the reservations survive a power loss and cover all connections in a multi path environment" ] * 'for-4.4/reservations' of git://git.kernel.dk/linux-block: NVMe: Precedence error in nvme_pr_clear() nvme: add missing endianess annotations in nvme_pr_command NVMe: Add persistent reservation ops sd: implement the Persistent Reservation API block: add an API for Persistent Reservations block: cleanup blkdev_ioctl
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block integrity updates from Jens Axboe: ""This is the joint work of Dan and Martin, cleaning up and improving the support for block data integrity" * 'for-4.4/integrity' of git://git.kernel.dk/linux-block: block, libnvdimm, nvme: provide a built-in blk_integrity nop profile block: blk_flush_integrity() for bio-based drivers block: move blk_integrity to request_queue block: generic request_queue reference counting nvme: suspend i/o during runtime blk_integrity_unregister md: suspend i/o during runtime blk_integrity_unregister md, dm, scsi, nvme, libnvdimm: drop blk_integrity_unregister() at shutdown block: Inline blk_integrity in struct gendisk block: Export integrity data interval size in sysfs block: Reduce the size of struct blk_integrity block: Consolidate static integrity profile properties block: Move integrity kobject to struct gendisk
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull lightnvm support from Jens Axboe: "This adds support for lightnvm, and adds support to NVMe as well. This is pretty exciting, in that it enables new and interesting use cases for compatible flash devices. There's a LWN writeup about an earlier posting here: https://lwn.net/Articles/641247/ This has been underway for a while, and should be ready for merging at this point" * 'for-4.4/lightnvm' of git://git.kernel.dk/linux-block: nvme: lightnvm: clean up a data type lightnvm: refactor phys addrs type to u64 nvme: LightNVM support rrpc: Round-robin sector target with cost-based gc gennvm: Generic NVM manager lightnvm: Support for Open-Channel SSDs
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block driver updates from Jens Axboe: "Here are the block driver changes for 4.4. This pull request contains: - NVMe: - Refactor and moving of code to prepare for proper target support. From Christoph and Jay. - 32-bit nvme warning fix from Arnd. - Error initialization fix from me. - Proper namespace removal and reference counting support from Keith. - Device resume fix on IO failure, also from Keith. - Dependency fix from Keith, now that nvme isn't under the umbrella of the block anymore. - Target location and maintainers update from Jay. - From Ming Lei, the long awaited DIO/AIO support for loop. - Enable BD-RE writeable opens, from Georgios" * 'for-4.4/drivers' of git://git.kernel.dk/linux-block: (24 commits) Update target repo for nvme patch contributions NVMe: initialize error to '0' nvme: use an integer value to Linux errno values nvme: fix 32-bit build warning NVMe: Add explicit block config dependency nvme: include <linux/types.ĥ> in <linux/nvme.h> nvme: move to a new drivers/nvme/host directory nvme.h: add missing nvme_id_ctrl endianess annotations nvme: move hardware structures out of the uapi version of nvme.h nvme: add a local nvme.h header nvme: properly handle partially initialized queues in nvme_create_io_queues nvme: merge nvme_dev_start, nvme_dev_resume and nvme_async_probe nvme: factor reset code into a common helper nvme: merge nvme_dev_reset into nvme_reset_failed_dev nvme: delete dev from dev_list in nvme_reset NVMe: Simplify device resume on io queue failure NVMe: Namespace removal simplifications NVMe: Reference count open namespaces cdrom: Random writing support for BD-RE media block: loop: support DIO & AIO ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull core block updates from Jens Axboe: "This is the core block pull request for 4.4. I've got a few more topic branches this time around, some of them will layer on top of the core+drivers changes and will come in a separate round. So not a huge chunk of changes in this round. This pull request contains: - Enable blk-mq page allocation tracking with kmemleak, from Catalin. - Unused prototype removal in blk-mq from Christoph. - Cleanup of the q->blk_trace exchange, using cmpxchg instead of two xchg()'s, from Davidlohr. - A plug flush fix from Jeff. - Also from Jeff, a fix that means we don't have to update shared tag sets at init time unless we do a state change. This cuts down boot times on thousands of devices a lot with scsi/blk-mq. - blk-mq waitqueue barrier fix from Kosuke. - Various fixes from Ming: - Fixes for segment merging and splitting, and checks, for the old core and blk-mq. - Potential blk-mq speedup by marking ctx pending at the end of a plug insertion batch in blk-mq. - direct-io no page dirty on kernel direct reads. - A WRITE_SYNC fix for mpage from Roman" * 'for-4.4/core' of git://git.kernel.dk/linux-block: blk-mq: avoid excessive boot delays with large lun counts blktrace: re-write setting q->blk_trace blk-mq: mark ctx as pending at batch in flush plug path blk-mq: fix for trace_block_plug() block: check bio_mergeable() early before merging blk-mq: check bio_mergeable() early before merging block: avoid to merge splitted bio block: setup bi_phys_segments after splitting block: fix plug list flushing for nomerge queues blk-mq: remove unused blk_mq_clone_flush_request prototype blk-mq: fix waitqueue_active without memory barrier in block/blk-mq-tag.c fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read fs/mpage.c: forgotten WRITE_SYNC in case of data integrity write block: kmemleak: Track the page allocations for struct request
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI updates from Rafael Wysocki: "Quite a new features are included this time. First off, the Collaborative Processor Performance Control interface (version 2) defined by ACPI will now be supported on ARM64 along with a cpufreq frontend for CPU performance scaling. Second, ACPI gets a new infrastructure for the early probing of IRQ chips and clock sources (along the lines of the existing similar mechanism for DT). Next, the ACPI core and the generic device properties API will now support a recently introduced hierarchical properties extension of the _DSD (Device Specific Data) ACPI device configuration object. If the ACPI platform firmware uses that extension to organize device properties in a hierarchical way, the kernel will automatically handle it and make those properties available to device drivers via the generic device properties API. It also will be possible to build the ACPICA's AML interpreter debugger into the kernel now and use that to diagnose AML-related problems more efficiently. In the future, this should make it possible to single-step AML execution and do similar things. Interesting stuff, although somewhat experimental at this point. Finally, the PM core gets a new mechanism that can be used by device drivers to distinguish between suspend-to-RAM (based on platform firmware support) and suspend-to-idle (or other variants of system suspend the platform firmware is not involved in) and possibly optimize their device suspend/resume handling accordingly. In addition to that, some existing features are re-organized quite substantially. First, the ACPI-based handling of PCI host bridges on x86 and ia64 is unified and the common code goes into the ACPI core (so as to reduce code duplication and eliminate non-essential differences between the two architectures in that area). Second, the Operating Performance Points (OPP) framework is reorganized to make the code easier to find and follow. Next, the cpufreq core's sysfs interface is reorganized to get rid of the "primary CPU" concept for configurations in which the same performance scaling settings are shared between multiple CPUs. Finally, some interfaces that aren't necessary any more are dropped from the generic power domains framework. On top of the above we have some minor extensions, cleanups and bug fixes in multiple places, as usual. Specifics: - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng). The most significant change is to allow the AML debugger to be built into the kernel. On top of that there is an update related to the NFIT table (the ACPI persistent memory interface) and a few fixes and cleanups. - ACPI CPPC2 (Collaborative Processor Performance Control v2) support along with a cpufreq frontend (Ashwin Chaugule). This can only be enabled on ARM64 at this point. - New ACPI infrastructure for the early probing of IRQ chips and clock sources (Marc Zyngier). - Support for a new hierarchical properties extension of the ACPI _DSD (Device Specific Data) device configuration object allowing the kernel to handle hierarchical properties (provided by the platform firmware this way) automatically and make them available to device drivers via the generic device properties interface (Rafael Wysocki). - Generic device properties API extension to obtain an index of certain string value in an array of strings, along the lines of of_property_match_string(), but working for all of the supported firmware node types, and support for the "dma-names" device property based on it (Mika Westerberg). - ACPI core fix to parse the MADT (Multiple APIC Description Table) entries in the order expected by platform firmware (and mandated by the specification) to avoid confusion on systems with more than 255 logical CPUs (Lukasz Anaczkowski). - Consolidation of the ACPI-based handling of PCI host bridges on x86 and ia64 (Jiang Liu). - ACPI core fixes to ensure that the correct IRQ number is used to represent the SCI (System Control Interrupt) in the cases when it has been re-mapped (Chen Yu). - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede). - ACPI EC driver fixes (Lv Zheng). - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri Kosina, Rami Rosen, Rasmus Villemoes). - New mechanism in the PM core allowing drivers to check if the platform firmware is going to be involved in the upcoming system suspend or if it has been involved in the suspend the system is resuming from at the moment (Rafael Wysocki). This should allow drivers to optimize their suspend/resume handling in some cases and the changes include a couple of users of it (the i8042 input driver, PCI PM). - PCI PM fix to prevent runtime-suspended devices with PME enabled from being resumed during system suspend even if they aren't configured to wake up the system from sleep (Rafael Wysocki). - New mechanism to report the number of a wakeup IRQ that woke up the system from sleep last time (Alexandra Yates). - Removal of unused interfaces from the generic power domains framework and fixes related to latency measurements in that code (Ulf Hansson, Daniel Lezcano). - cpufreq core sysfs interface rework to make it handle CPUs that share performance scaling settings (represented by a common cpufreq policy object) more symmetrically (Viresh Kumar). This should help to simplify the CPU offline/online handling among other things. - cpufreq core fixes and cleanups (Viresh Kumar). - intel_pstate fixes related to the Turbo Activation Ratio (TAR) mechanism on client platforms which causes the turbo P-states range to vary depending on platform firmware settings (Srinivas Pandruvada). - intel_pstate sysfs interface fix (Prarit Bhargava). - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G Bhat, Luis de Bethencourt). - cpuidle mvebu driver cleanups (Russell King). - OPP (Operating Performance Points) framework code reorganization to make it more maintainable (Viresh Kumar). - Intel Broxton support for the RAPL (Running Average Power Limits) power capping driver (Amy Wiles). - Assorted power management code fixes and cleanups (Dan Carpenter, Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus Villemoes)" * tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits) cpufreq: postfix policy directory with the first CPU in related_cpus cpufreq: create cpu/cpufreq/policyX directories cpufreq: remove cpufreq_sysfs_{create|remove}_file() cpufreq: create cpu/cpufreq at boot time cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate() PM / Domains: Merge measurements for PM QoS device latencies PM / Domains: Don't measure ->start|stop() latency in system PM callbacks PM / clk: Fix broken build due to non-matching code and header #ifdefs ACPI / Documentation: add copy_dsdt to ACPI format options ACPI / sysfs: correctly check failing memory allocation ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405 ACPI / CPPC: Fix potential memory leak ACPI / CPPC: signedness bug in register_pcc_channel() ACPI / PAD: power_saving_thread() is not freezable ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle ACPI: Using correct irq when waiting for events ACPI: Use correct IRQ when uninstalling ACPI interrupt handler cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver cpuidle: mvebu: clean up multiple platform drivers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen updates from David Vrabel: - Improve balloon driver memory hotplug placement. - Use unpopulated hotplugged memory for foreign pages (if supported/enabled). - Support 64 KiB guest pages on arm64. - CPU hotplug support on arm/arm64. * tag 'for-linus-4.4-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (44 commits) xen: fix the check of e_pfn in xen_find_pfn_range x86/xen: add reschedule point when mapping foreign GFNs xen/arm: don't try to re-register vcpu_info on cpu_hotplug. xen, cpu_hotplug: call device_offline instead of cpu_down xen/arm: Enable cpu_hotplug.c xenbus: Support multiple grants ring with 64KB xen/grant-table: Add an helper to iterate over a specific number of grants xen/xenbus: Rename *RING_PAGE* to *RING_GRANT* xen/arm: correct comment in enlighten.c xen/gntdev: use types from linux/types.h in userspace headers xen/gntalloc: use types from linux/types.h in userspace headers xen/balloon: Use the correct sizeof when declaring frame_list xen/swiotlb: Add support for 64KB page granularity xen/swiotlb: Pass addresses rather than frame numbers to xen_arch_need_swiotlb arm/xen: Add support for 64KB page granularity xen/privcmd: Add support for Linux 64KB page granularity net/xen-netback: Make it running on 64KB page granularity net/xen-netfront: Make it running on 64KB page granularity block/xen-blkback: Make it running on 64KB page granularity block/xen-blkfront: Make it running on 64KB page granularity ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 updates from Catalin Marinas: - "genirq: Introduce generic irq migration for cpu hotunplugged" patch merged from tip/irq/for-arm to allow the arm64-specific part to be upstreamed via the arm64 tree - CPU feature detection reworked to cope with heterogeneous systems where CPUs may not have exactly the same features. The features reported by the kernel via internal data structures or ELF_HWCAP are delayed until all the CPUs are up (and before user space starts) - Support for 16KB pages, with the additional bonus of a 36-bit VA space, though the latter only depending on EXPERT - Implement native {relaxed, acquire, release} atomics for arm64 - New ASID allocation algorithm which avoids IPI on roll-over, together with TLB invalidation optimisations (using local vs global where feasible) - KASan support for arm64 - EFI_STUB clean-up and isolation for the kernel proper (required by KASan) - copy_{to,from,in}_user optimisations (sharing the memcpy template) - perf: moving arm64 to the arm32/64 shared PMU framework - L1_CACHE_BYTES increased to 128 to accommodate Cavium hardware - Support for the contiguous PTE hint on kernel mapping (16 consecutive entries may be able to use a single TLB entry) - Generic CONFIG_HZ now used on arm64 - defconfig updates * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (91 commits) arm64/efi: fix libstub build under CONFIG_MODVERSIONS ARM64: Enable multi-core scheduler support by default arm64/efi: move arm64 specific stub C code to libstub arm64: page-align sections for DEBUG_RODATA arm64: Fix build with CONFIG_ZONE_DMA=n arm64: Fix compat register mappings arm64: Increase the max granular size arm64: remove bogus TASK_SIZE_64 check arm64: make Timer Interrupt Frequency selectable arm64/mm: use PAGE_ALIGNED instead of IS_ALIGNED arm64: cachetype: fix definitions of ICACHEF_* flags arm64: cpufeature: declare enable_cpu_capabilities as static genirq: Make the cpuhotplug migration code less noisy arm64: Constify hwcap name string arrays arm64/kvm: Make use of the system wide safe values arm64/debug: Make use of the system wide safe value arm64: Move FP/ASIMD hwcap handling to common code arm64/HWCAP: Use system wide safe values arm64/capabilities: Make use of system wide safe value arm64: Delay cpu feature capability checks ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 updates from Martin Schwidefsky: "There is only one new feature in this pull for the 4.4 merge window, most of it is small enhancements, cleanup and bug fixes: - Add the s390 backend for the software dirty bit tracking. This adds two new pgtable functions pte_clear_soft_dirty and pmd_clear_soft_dirty which is why there is a hit to arch/x86/include/asm/pgtable.h in this pull request. - A series of cleanup patches for the AP bus, this includes the removal of the support for two outdated crypto cards (PCICC and PCICA). - The irq handling / signaling on buffer full in the runtime instrumentation code is dropped. - Some micro optimizations: remove unnecessary memory barriers for a couple of functions: [smb_]rmb, [smb_]wmb, atomics, bitops, and for spin_unlock. Use the builtin bswap if available and make test_and_set_bit_lock more cache friendly. - Statistics and a tracepoint for the diagnose calls to the hypervisor. - The CPU measurement facility support to sample KVM guests is improved. - The vector instructions are now always enabled for user space processes if the hardware has the vector facility. This simplifies the FPU handling code. The fpu-internal.h header is split into fpu internals, api and types just like x86. - Cleanup and improvements for the common I/O layer. - Rework udelay to solve a problem with kprobe. udelay has busy loop semantics but still uses an idle processor state for the wait" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits) s390: remove runtime instrumentation interrupts s390/cio: de-duplicate subchannel validation s390/css: unneeded initialization in for_each_subchannel s390/Kconfig: use builtin bswap s390/dasd: fix disconnected device with valid path mask s390/dasd: fix invalid PAV assignment after suspend/resume s390/dasd: fix double free in dasd_eckd_read_conf s390/kernel: fix ptrace peek/poke for floating point registers s390/cio: move ccw_device_stlck functions s390/cio: move ccw_device_call_handler s390/topology: reduce per_cpu() invocations s390/nmi: reduce size of percpu variable s390/nmi: fix terminology s390/nmi: remove casts s390/nmi: remove pointless error strings s390: don't store registers on disabled wait anymore s390: get rid of __set_psw_mask() s390/fpu: split fpu-internal.h into fpu internals, api, and type headers s390/dasd: fix list_del corruption after lcu changes s390/spinlock: remove unneeded serializations at unlock ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc updates from Helge Deller: "The most important change is that we reduce L1_CACHE_BYTES to 16 bytes, for which a trivial patch for XPS in the network layer was needed. Then we wire up the sys_membarrier and userfaultfd syscalls and added two other small cleanups" * 'parisc-4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Change L1_CACHE_BYTES to 16 net/xps: Fix calculation of initial number of xps queues parisc: reduce syslog debug output parisc: serial/mux: Convert to uart_console_device instead of open-coded parisc: Wire up userfaultfd syscall parisc: allocate sys_membarrier system call number
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide由 Linus Torvalds 提交于
Pull IDE fixlet from David Miller: "Just a y2038 fix to the pdc202xx_new IDE driver" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: pdc202xx_new: Replace timeval with ktime_t
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next由 Linus Torvalds 提交于
Pull networking updates from David Miller: Changes of note: 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell. 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from David Ahern. 3) Allow the user to ask for the statistics to be filtered out of ipv4/ipv6 address netlink dumps. From Sowmini Varadhan. 4) More work to pass the network namespace context around deep into various packet path APIs, starting with the netfilter hooks. From Eric W Biederman. 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas Richter. 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng. 7) Support Very High Throughput in wireless MESH code, from Bob Copeland. 8) Allow setting the ageing_time in switchdev/rocker. From Scott Feldman. 9) Properly autoload L2TP type modules, from Stephen Hemminger. 10) Fix and enable offload features by default in 8139cp driver, from David Woodhouse. 11) Support both ipv4 and ipv6 sockets in a single vxlan device, from Jiri Benc. 12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning Opstad. 13) Fix IPSEC flowcache overflows on large systems, from Steffen Klassert. 14) Convert bridging to track VLANs using rhashtable entries rather than a bitmap. From Nikolay Aleksandrov. 15) Make TCP listener handling completely lockless, this is a major accomplishment. Incoming request sockets now live in the established hash table just like any other socket too. From Eric Dumazet. 15) Provide more bridging attributes to netlink, from Nikolay Aleksandrov. 16) Use hash based algorithm for ipv4 multipath routing, this was very long overdue. From Peter Nørlund. 17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann. 18) Allow non-root execution of EBPF programs, from Alexei Starovoitov. 19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This influences the port binding selection logic used by SO_REUSEPORT. 20) Add ipv6 support to VRF, from David Ahern. 21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko. 22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen. 23) Implement RACK loss recovery in TCP, from Yuchung Cheng. 24) Support multipath routes in MPLS, from Roopa Prabhu. 25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric Dumazet. 26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and Sudarsana Kalluru. 27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic Sowa. 28) Support ipv6 geneve tunnels, from John W Linville. 29) Add flood control support to switchdev layer, from Ido Schimmel. 30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from Hannes Frederic Sowa. 31) Support persistent maps and progs in bpf, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits) sh_eth: use DMA barriers switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion net: sched: kill dead code in sch_choke.c irda: Delete an unnecessary check before the function call "irlmp_unregister_service" net: dsa: mv88e6xxx: include DSA ports in VLANs net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports net/core: fix for_each_netdev_feature vlan: Invoke driver vlan hooks only if device is present arcnet/com20020: add LEDS_CLASS dependency bpf, verifier: annotate verbose printer with __printf dp83640: Only wait for timestamps for packets with timestamping enabled. ptp: Change ptp_class to a proper bitmask dp83640: Prune rx timestamp list before reading from it dp83640: Delay scheduled work. dp83640: Include hash in timestamp/packet matching ipv6: fix tunnel error handling net/mlx5e: Fix LSO vlan insertion net/mlx5e: Re-eanble client vlan TX acceleration net/mlx5e: Return error in case mlx5e_set_features() fails net/mlx5e: Don't allow more than max supported channels ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto update from Herbert Xu: "API: - Add support for cipher output IVs in testmgr - Add missing crypto_ahash_blocksize helper - Mark authenc and des ciphers as not allowed under FIPS. Algorithms: - Add CRC support to 842 compression - Add keywrap algorithm - A number of changes to the akcipher interface: + Separate functions for setting public/private keys. + Use SG lists. Drivers: - Add Intel SHA Extension optimised SHA1 and SHA256 - Use dma_map_sg instead of custom functions in crypto drivers - Add support for STM32 RNG - Add support for ST RNG - Add Device Tree support to exynos RNG driver - Add support for mxs-dcp crypto device on MX6SL - Add xts(aes) support to caam - Add ctr(aes) and xts(aes) support to qat - A large set of fixes from Russell King for the marvell/cesa driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (115 commits) crypto: asymmetric_keys - Fix unaligned access in x509_get_sig_params() crypto: akcipher - Don't #include crypto/public_key.h as the contents aren't used hwrng: exynos - Add Device Tree support hwrng: exynos - Fix missing configuration after suspend to RAM hwrng: exynos - Add timeout for waiting on init done dt-bindings: rng: Describe Exynos4 PRNG bindings crypto: marvell/cesa - use __le32 for hardware descriptors crypto: marvell/cesa - fix missing cpu_to_le32() in mv_cesa_dma_add_op() crypto: marvell/cesa - use memcpy_fromio()/memcpy_toio() crypto: marvell/cesa - use gfp_t for gfp flags crypto: marvell/cesa - use dma_addr_t for cur_dma crypto: marvell/cesa - use readl_relaxed()/writel_relaxed() crypto: caam - fix indentation of close braces crypto: caam - only export the state we really need to export crypto: caam - fix non-block aligned hash calculation crypto: caam - avoid needlessly saving and restoring caam_hash_ctx crypto: caam - print errno code when hash registration fails crypto: marvell/cesa - fix memory leak crypto: marvell/cesa - fix first-fragment handling in mv_cesa_ahash_dma_last_req() crypto: marvell/cesa - rearrange handling for sw padded hashes ...
-
- 04 11月, 2015 20 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 platform changes from Ingo Molnar: "Misc updates to the Intel MID and SGI UV platforms" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel-mid: Make intel_mid_ops static arch/x86/intel-mid: Use kmemdup rather than duplicating its implementation x86/platform/uv: Implement simple dump failover if kdump fails x86/platform/uv: Insert per_cpu accessor function on uv_hub_nmi
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 mm changes from Ingo Molnar: "The main changes are: continued PAT work by Toshi Kani, plus a new boot time warning about insecure RWX kernel mappings, by Stephen Smalley. The new CONFIG_DEBUG_WX=y warning is marked default-y if CONFIG_DEBUG_RODATA=y is already eanbled, as a special exception, as these bugs are hard to notice and this check already found several live bugs" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Warn on W^X mappings x86/mm: Fix no-change case in try_preserve_large_page() x86/mm: Fix __split_large_page() to handle large PAT bit x86/mm: Fix try_preserve_large_page() to handle large PAT bit x86/mm: Fix gup_huge_p?d() to handle large PAT bit x86/mm: Fix slow_virt_to_phys() to handle large PAT bit x86/mm: Fix page table dump to show PAT bit x86/asm: Add pud_pgprot() and pmd_pgprot() x86/asm: Fix pud/pmd interfaces to handle large PAT bit x86/asm: Add pud/pmd mask interfaces to handle large PAT bit x86/asm: Move PUD_PAGE macros to page_types.h x86/vdso32: Define PGTABLE_LEVELS to 32bit VDSO
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 sigcontext header cleanups from Ingo Molnar: "This series reorganizes and cleans up various aspects of the main sigcontext UAPI headers, such as unifying the data structures and updating/adding lots of comments to explain all the ABI details and quirks. The headers can now also be built in user-space standalone" * 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/headers: Clean up too long lines x86/headers: Remove <asm/sigcontext.h> references on the kernel side x86/headers: Remove direct sigcontext32.h uses x86/headers: Convert sigcontext_ia32 uses to sigcontext_32 x86/headers: Unify 'struct sigcontext_ia32' and 'struct sigcontext_32' x86/headers: Make sigcontext pointers bit independent x86/headers: Move the 'struct sigcontext' definitions into the UAPI header x86/headers: Clean up the kernel's struct sigcontext types to be ABI-clean x86/headers: Convert uses of _fpstate_ia32 to _fpstate_32 x86/headers: Unify 'struct _fpstate_ia32' and i386 struct _fpstate x86/headers: Unify register type definitions between 32-bit compat and i386 x86/headers: Use ABI types consistently in sigcontext*.h x86/headers: Separate out legacy user-space structure definitions x86/headers: Clean up and better document uapi/asm/sigcontext.h x86/headers: Clean up uapi/asm/sigcontext32.h x86/headers: Fix (old) header file dependency bug in uapi/asm/sigcontext32.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fpu changes from Ingo Molnar: "There are two main areas of changes: - Rework of the extended FPU state code to robustify the kernel's usage of cpuid provided xstate sizes - and related changes (Dave Hansen)" - math emulation enhancements: new modern FPU instructions support, with testcases, plus cleanups (Denys Vlasnko)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/fpu: Fixup uninitialized feature_name warning x86/fpu/math-emu: Add support for FISTTP instructions x86/fpu/math-emu, selftests: Add test for FISTTP instructions x86/fpu/math-emu: Add support for FCMOVcc insns x86/fpu/math-emu: Add support for F[U]COMI[P] insns x86/fpu/math-emu: Remove define layer for undocumented opcodes x86/fpu/math-emu, selftests: Add tests for FCMOV and FCOMI insns x86/fpu/math-emu: Remove !NO_UNDOC_CODE x86/fpu: Check CPU-provided sizes against struct declarations x86/fpu: Check to ensure increasing-offset xstate offsets x86/fpu: Correct and check XSAVE xstate size calculations x86/fpu: Add C structures for AVX-512 state components x86/fpu: Rework YMM definition x86/fpu/mpx: Rework MPX 'xstate' types x86/fpu: Add xfeature_enabled() helper instead of test_bit() x86/fpu: Remove 'xfeature_nr' x86/fpu: Rework XSTATE_* macros to remove magic '2' x86/fpu: Rename XFEATURES_NR_MAX x86/fpu: Rename XSAVE macros x86/fpu: Remove partial LWP support definitions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 kgdb fixlet from Ingo Molnar: "A single debugging related commit: compress the memory usage of a kgdb data structure" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kgdb: Replace bool_int_array[NR_CPUS] with bitmap
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cpu changes from Ingo Molnar: "Two changes in this cycle: a Kconfig help text enhancement, and an AMD CLZERO instruction capability detection and enumeration" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add CLZERO detection x86/Kconfig/cpus: Fix/complete CPU type help texts
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanups from Ingo Molnar: "An early_printk cleanup plus deinlining enhancements" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/early_printk: Set __iomem address space for IO x86/signal: Deinline get_sigframe, save 240 bytes x86: Deinline early_console_register, save 403 bytes x86/e820: Deinline e820_type_to_string, save 126 bytes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 boot cleanup from Ingo Molnar: "A single commit: remove an obsolete kcrash boot flag" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kexec: Remove obsolete 'in_crash_kexec' flag
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 asm changes from Ingo Molnar: "The main change in this cycle is another step in the big x86 system call interface rework by Andy Lutomirski, which moves most of the low level x86 entry code from assembly to C, for all syscall entries except native 64-bit system calls: arch/x86/entry/entry_32.S | 182 ++++------ arch/x86/entry/entry_64_compat.S | 547 ++++++++----------------------- 194 insertions(+), 535 deletions(-) ... our hope is that the final remaining step (converting native 64-bit system calls) will be less painful as all the previous steps, given that most of the legacies and quirks are concentrated around native 32-bit and compat environments" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) x86/entry/32: Fix FS and GS restore in opportunistic SYSEXIT x86/entry/32: Fix entry_INT80_32() to expect interrupts to be on um/x86: Fix build after x86 syscall changes x86/asm: Remove the xyz_cfi macros from dwarf2.h selftests/x86: Style fixes for the 'unwind_vdso' test x86/entry/64/compat: Document sysenter_fix_flags's reason for existence x86/entry: Split and inline syscall_return_slowpath() x86/entry: Split and inline prepare_exit_to_usermode() x86/entry: Use pt_regs_to_thread_info() in syscall entry tracing x86/entry: Hide two syscall entry assertions behind CONFIG_DEBUG_ENTRY x86/entry: Micro-optimize compat fast syscall arg fetch x86/entry: Force inlining of 32-bit syscall code x86/entry: Make irqs_disabled checks in exit code depend on lockdep x86/entry: Remove unnecessary IRQ twiddling in fast 32-bit syscalls x86/asm: Remove thread_info.sysenter_return x86/entry/32: Re-implement SYSENTER using the new C path x86/entry/32: Switch INT80 to the new C syscall path x86/entry/32: Open-code return tracking from fork and kthreads x86/entry/compat: Implement opportunistic SYSRETL for compat syscalls x86/vdso/compat: Wire up SYSENTER and SYSCSALL for compat userspace ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 apic changes from Ingo Molnar: "The main changes in this cycle were: - Numachip updates: new hardware support, fixes and cleanups. (Daniel J Blueman) - misc smaller cleanups and fixlets" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/io_apic: Make eoi_ioapic_pin() static x86/irq: Drop unlikely before IS_ERR_OR_NULL x86/x2apic: Make stub functions available even if !CONFIG_X86_LOCAL_APIC x86/apic: Deinline various functions x86/numachip: Fix timer build conflict x86/numachip: Introduce Numachip2 timer mechanisms x86/numachip: Add Numachip IPI optimisations x86/numachip: Add Numachip2 APIC support x86/numachip: Cleanup Numachip support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler changes from Ingo Molnar: "The main changes in this cycle were: - sched/fair load tracking fixes and cleanups (Byungchul Park) - Make load tracking frequency scale invariant (Dietmar Eggemann) - sched/deadline updates (Juri Lelli) - stop machine fixes, cleanups and enhancements for bugs triggered by CPU hotplug stress testing (Oleg Nesterov) - scheduler preemption code rework: remove PREEMPT_ACTIVE and related cleanups (Peter Zijlstra) - Rework the sched_info::run_delay code to fix races (Peter Zijlstra) - Optimize per entity utilization tracking (Peter Zijlstra) - ... misc other fixes, cleanups and smaller updates" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) sched: Don't scan all-offline ->cpus_allowed twice if !CONFIG_CPUSETS sched: Move cpu_active() tests from stop_two_cpus() into migrate_swap_stop() sched: Start stopper early stop_machine: Kill cpu_stop_threads->setup() and cpu_stop_unpark() stop_machine: Kill smp_hotplug_thread->pre_unpark, introduce stop_machine_unpark() stop_machine: Change cpu_stop_queue_two_works() to rely on stopper->enabled stop_machine: Introduce __cpu_stop_queue_work() and cpu_stop_queue_two_works() stop_machine: Ensure that a queued callback will be called before cpu_stop_park() sched/x86: Fix typo in __switch_to() comments sched/core: Remove a parameter in the migrate_task_rq() function sched/core: Drop unlikely behind BUG_ON() sched/core: Fix task and run queue sched_info::run_delay inconsistencies sched/numa: Fix task_tick_fair() from disabling numa_balancing sched/core: Add preempt_count invariant check sched/core: More notrace annotations sched/core: Kill PREEMPT_ACTIVE sched/core, sched/x86: Kill thread_info::saved_preempt_count sched/core: Simplify preempt_count tests sched/core: Robustify preemption leak checks sched/core: Stop setting PREEMPT_ACTIVE ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RAS changes from Ingo Molnar: "The main system reliability related changes were from x86, but also some generic RAS changes: - AMD MCE error injection subsystem enhancements. (Aravind Gopalakrishnan) - Fix MCE and CPU hotplug interaction bug. (Ashok Raj) - kcrash bootup robustness fix. (Baoquan He) - kcrash cleanups. (Borislav Petkov) - x86 microcode driver rework: simplify it by unmodularizing it and other cleanups. (Borislav Petkov)" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/mce: Add a default case to the switch in __mcheck_cpu_ancient_init() x86/mce: Add a Scalable MCA vendor flags bit MAINTAINERS: Unify the microcode driver section x86/microcode/intel: Move #ifdef DEBUG inside the function x86/microcode/amd: Remove maintainers from comments x86/microcode: Remove modularization leftovers x86/microcode: Merge the early microcode loader x86/microcode: Unmodularize the microcode driver x86/mce: Fix thermal throttling reporting after kexec kexec/crash: Say which char is the unrecognized x86/setup/crash: Check memblock_reserve() retval x86/setup/crash: Cleanup some more x86/setup/crash: Remove alignment variable x86/setup: Cleanup crashkernel reservation functions x86/amd_nb, EDAC: Rename amd_get_node_id() x86/setup: Do not reserve crashkernel high memory if low reservation failed x86/microcode/amd: Do not overwrite final patch levels x86/microcode/amd: Extract current patch level read to a function x86/ras/mce_amd_inj: Inject bank 4 errors on the NBC x86/ras/mce_amd_inj: Trigger deferred and thresholding errors interrupts ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Ingo Molnar: "Kernel side changes: - Improve accuracy of perf/sched clock on x86. (Adrian Hunter) - Intel DS and BTS updates. (Alexander Shishkin) - Intel cstate PMU support. (Kan Liang) - Add group read support to perf_event_read(). (Peter Zijlstra) - Branch call hardware sampling support, implemented on x86 and PowerPC. (Stephane Eranian) - Event groups transactional interface enhancements. (Sukadev Bhattiprolu) - Enable proper x86/intel/uncore PMU support on multi-segment PCI systems. (Taku Izumi) - ... misc fixes and cleanups. The perf tooling team was very busy again with 200+ commits, the full diff doesn't fit into lkml size limits. Here's an (incomplete) list of the tooling highlights: New features: - Change the default event used in all tools (record/top): use the most precise "cycles" hw counter available, i.e. when the user doesn't specify any event, it will try using cycles:ppp, cycles:pp, etc and fall back transparently until it finds a working counter. (Arnaldo Carvalho de Melo) - Integration of perf with eBPF that, given an eBPF .c source file (or .o file built for the 'bpf' target with clang), will get it automatically built, validated and loaded into the kernel via the sys_bpf syscall, which can then be used and seen using 'perf trace' and other tools. (Wang Nan) Various user interface improvements: - Automatic pager invocation on long help output. (Namhyung Kim) - Search for more options when passing args to -h, e.g.: (Arnaldo Carvalho de Melo) $ perf report -h interface Usage: perf report [<options>] --gtk Use the GTK2 interface --stdio Use the stdio interface --tui Use the TUI interface - Show ordered command line options when -h is used or when an unknown option is specified. (Arnaldo Carvalho de Melo) - If options are passed after -h, show just its descriptions, not all options. (Arnaldo Carvalho de Melo) - Implement column based horizontal scrolling in the hists browser (top, report), making it possible to use the TUI for things like 'perf mem report' where there are many more columns than can fit in a terminal. (Arnaldo Carvalho de Melo) - Enhance the error reporting of tracepoint event parsing, e.g.: $ oldperf record -e sched:sched_switc usleep 1 event syntax error: 'sched:sched_switc' \___ unknown tracepoint Run 'perf list' for a list of valid events Now we get the much nicer: $ perf record -e sched:sched_switc ls event syntax error: 'sched:sched_switc' \___ can't access trace events Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_switc Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug' And after we have those mount point permissions fixed: $ perf record -e sched:sched_switc ls event syntax error: 'sched:sched_switc' \___ unknown tracepoint Error: File /sys/kernel/debug/tracing/events/sched/sched_switc not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. I.e. basically now the event parsing routing uses the strerror_open() routines introduced by and used in 'perf trace' work. (Jiri Olsa) - Fail properly when pattern matching fails to find a tracepoint, i.e. '-e non:existent' was being correctly handled, with a proper error message about that not being a valid event, but '-e non:existent*' wasn't, fix it. (Jiri Olsa) - Do event name substring search as last resort in 'perf list'. (Arnaldo Carvalho de Melo) E.g.: # perf list clock List of pre-defined events (to be used in -e): cpu-clock [Software event] task-clock [Software event] uncore_cbox_0/clockticks/ [Kernel PMU event] uncore_cbox_1/clockticks/ [Kernel PMU event] kvm:kvm_pvclock_update [Tracepoint event] kvm:kvm_update_master_clock [Tracepoint event] power:clock_disable [Tracepoint event] power:clock_enable [Tracepoint event] power:clock_set_rate [Tracepoint event] syscalls:sys_enter_clock_adjtime [Tracepoint event] syscalls:sys_enter_clock_getres [Tracepoint event] syscalls:sys_enter_clock_gettime [Tracepoint event] syscalls:sys_enter_clock_nanosleep [Tracepoint event] syscalls:sys_enter_clock_settime [Tracepoint event] syscalls:sys_exit_clock_adjtime [Tracepoint event] syscalls:sys_exit_clock_getres [Tracepoint event] syscalls:sys_exit_clock_gettime [Tracepoint event] syscalls:sys_exit_clock_nanosleep [Tracepoint event] syscalls:sys_exit_clock_settime [Tracepoint event] Intel PT hardware tracing enhancements: - Accept a zero --itrace period, meaning "as often as possible". In the case of Intel PT that is the same as a period of 1 and a unit of 'instructions' (i.e. --itrace=i1i). (Adrian Hunter) - Harmonize itrace's synthesized callchains with the existing --max-stack tool option. (Adrian Hunter) - Allow time to be displayed in nanoseconds in 'perf script'. (Adrian Hunter) - Fix potential infinite loop when handling Intel PT timestamps. (Adrian Hunter) - Slighly improve Intel PT debug logging. (Adrian Hunter) - Warn when AUX data has been lost, just like when processing PERF_RECORD_LOST. (Adrian Hunter) - Further document export-to-postgresql.py script. (Adrian Hunter) - Add option to synthesize branch stack from auxtrace data. (Adrian Hunter) Misc notable changes: - Switch the default callchain output mode to 'graph,0.5,caller', to make it look like the default for other tools, reducing the learning curve for people used to 'caller' based viewing. (Arnaldo Carvalho de Melo) - various call chain usability enhancements. (Namhyung Kim) - Introduce the 'P' event modifier, meaning 'max precision level, please', i.e.: $ perf record -e cycles:P usleep 1 Is now similar to: $ perf record usleep 1 Useful, for instance, when specifying multiple events. (Jiri Olsa) - Add 'socket' sort entry, to sort by the processor socket in 'perf top' and 'perf report'. (Kan Liang) - Introduce --socket-filter to 'perf report', for filtering by processor socket. (Kan Liang) - Add new "Zoom into Processor Socket" operation in the perf hists browser, used in 'perf top' and 'perf report'. (Kan Liang) - Allow probing on kmodules without DWARF. (Masami Hiramatsu) - Fix 'perf probe -l' for probes added to kernel module functions. (Masami Hiramatsu) - Preparatory work for the 'perf stat record' feature that will allow generating perf.data files with counting data in addition to the sampling mode we have now (Jiri Olsa) - Update libtraceevent KVM plugin. (Paolo Bonzini) - ... plus lots of other enhancements that I failed to list properly, by: Adrian Hunter, Alexander Shishkin, Andi Kleen, Andrzej Hajda, Arnaldo Carvalho de Melo, Dima Kogan, Don Zickus, Geliang Tang, He Kuang, Huaitong Han, Ingo Molnar, Jan Stancek, Jiri Olsa, Kan Liang, Kirill Tkhai, Masami Hiramatsu, Matt Fleming, Namhyung Kim, Paolo Bonzini, Peter Zijlstra, Rabin Vincent, Scott Wood, Stephane Eranian, Sukadev Bhattiprolu, Taku Izumi, Vaishali Thakkar, Wang Nan, Yang Shi and Yunlong Song" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (260 commits) perf unwind: Pass symbol source to libunwind tools build: Fix libiberty feature detection perf tools: Compile scriptlets to BPF objects when passing '.c' to --event perf record: Add clang options for compiling BPF scripts perf bpf: Attach eBPF filter to perf event perf tools: Make sure fixdep is built before libbpf perf script: Enable printing of branch stack perf trace: Add cmd string table to decode sys_bpf first arg perf bpf: Collect perf_evsel in BPF object files perf tools: Load eBPF object into kernel perf tools: Create probe points for BPF programs perf tools: Enable passing bpf object file to --event perf ebpf: Add the libbpf glue perf tools: Make perf depend on libbpf perf symbols: Fix endless loop in dso__split_kallsyms_for_kcore perf tools: Enable pre-event inherit setting by config terms perf symbols: we can now read separate debug-info files based on a build ID perf symbols: Fix type error when reading a build-id perf tools: Search for more options when passing args to -h perf stat: Cache aggregated map entries in extra cpumap ...
-
由 Linus Torvalds 提交于
This seems to be a mis-reading of how alpha memory ordering works, and is not backed up by the alpha architecture manual. The helper functions don't do anything special on any other architectures, and the arguments that support them being safe on other architectures also argue that they are safe on alpha. Basically, the "control dependency" is between a previous read and a subsequent write that is dependent on the value read. Even if the subsequent write is actually done speculatively, there is no way that such a speculative write could be made visible to other cpu's until it has been committed, which requires validating the speculation. Note that most weakely ordered architectures (very much including alpha) do not guarantee any ordering relationship between two loads that depend on each other on a control dependency: read A if (val == 1) read B because the conditional may be predicted, and the "read B" may be speculatively moved up to before reading the value A. So we require the user to insert a smp_rmb() between the two accesses to be correct: read A; if (A == 1) smp_rmb() read B Alpha is further special in that it can break that ordering even if the *address* of B depends on the read of A, because the cacheline that is read later may be stale unless you have a memory barrier in between the pointer read and the read of the value behind a pointer: read ptr read offset(ptr) whereas all other weakly ordered architectures guarantee that the data dependency (as opposed to just a control dependency) will order the two accesses. As a result, alpha needs a "smp_read_barrier_depends()" in between those two reads for them to be ordered. The coontrol dependency that "READ_ONCE_CTRL()" and "atomic_read_ctrl()" had was a control dependency to a subsequent *write*, however, and nobody can finalize such a subsequent write without having actually done the read. And were you to write such a value to a "stale" cacheline (the way the unordered reads came to be), that would seem to lose the write entirely. So the things that make alpha able to re-order reads even more aggressively than other weak architectures do not seem to be relevant for a subsequent write. Alpha memory ordering may be strange, but there's no real indication that it is *that* strange. Also, the alpha architecture reference manual very explicitly talks about the definition of "Dependence Constraints" in section 5.6.1.7, where a preceding read dominates a subsequent write. Such a dependence constraint admittedly does not impose a BEFORE (alpha architecture term for globally visible ordering), but it does guarantee that there can be no "causal loop". I don't see how you could avoid such a loop if another cpu could see the stored value and then impact the value of the first read. Put another way: the read and the write could not be seen as being out of order wrt other cpus. So I do not see how these "x_ctrl()" functions can currently be necessary. I may have to eat my words at some point, but in the absense of clear proof that alpha actually needs this, or indeed even an explanation of how alpha could _possibly_ need it, I do not believe these functions are called for. And if it turns out that alpha really _does_ need a barrier for this case, that barrier still should not be "smp_read_barrier_depends()". We'd have to make up some new speciality barrier just for alpha, along with the documentation for why it really is necessary. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul E McKenney <paulmck@us.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking changes from Ingo Molnar: "The main changes in this cycle were: - More gradual enhancements to atomic ops: new atomic*_read_ctrl() ops, synchronize atomic_{read,set}() ordering requirements between architectures, add atomic_long_t bitops. (Peter Zijlstra) - Add _{relaxed|acquire|release}() variants for inc/dec atomics and use them in various locking primitives: mutex, rtmutex, mcs, rwsem. This enables weakly ordered architectures (such as arm64) to make use of more locking related optimizations. (Davidlohr Bueso) - Implement atomic[64]_{inc,dec}_relaxed() on ARM. (Will Deacon) - Futex kernel data cache footprint micro-optimization. (Rasmus Villemoes) - pvqspinlock runtime overhead micro-optimization. (Waiman Long) - misc smaller fixlets" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM, locking/atomics: Implement _relaxed variants of atomic[64]_{inc,dec} locking/rwsem: Use acquire/release semantics locking/mcs: Use acquire/release semantics locking/rtmutex: Use acquire/release semantics locking/mutex: Use acquire/release semantics locking/asm-generic: Add _{relaxed|acquire|release}() variants for inc/dec atomics atomic: Implement atomic_read_ctrl() atomic, arch: Audit atomic_{read,set}() atomic: Add atomic_long_t bitops futex: Force hot variables into a single cache line locking/pvqspinlock: Kick the PV CPU unconditionally when _Q_SLOW_VAL locking/osq: Relax atomic semantics locking/qrwlock: Rename ->lock to ->wait_lock locking/Documentation/lockstat: Fix typo - lokcing -> locking locking/atomics, cmpxchg: Privatize the inclusion of asm/cmpxchg.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU changes from Ingo Molnar: "The main changes in this cycle were: - Improvements to expedited grace periods (Paul E McKenney) - Performance improvements to and locktorture tests for percpu-rwsem (Oleg Nesterov, Paul E McKenney) - Torture-test changes (Paul E McKenney, Davidlohr Bueso) - Documentation updates (Paul E McKenney) - Miscellaneous fixes (Paul E McKenney, Boqun Feng, Oleg Nesterov, Patrick Marlier)" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) fs/writeback, rcu: Don't use list_entry_rcu() for pointer offsetting in bdi_split_work_to_wbs() rcu: Better hotplug handling for synchronize_sched_expedited() rcu: Enable stall warnings for synchronize_rcu_expedited() rcu: Add tasks to expedited stall-warning messages rcu: Add online/offline info to expedited stall warning message rcu: Consolidate expedited CPU selection rcu: Prepare for consolidating expedited CPU selection cpu: Remove try_get_online_cpus() rcu: Stop excluding CPU hotplug in synchronize_sched_expedited() rcu: Stop silencing lockdep false positive for expedited grace periods rcu: Switch synchronize_sched_expedited() to IPI locktorture: Fix module unwind when bad torture_type specified torture: Forgive non-plural arguments rcutorture: Fix unused-function warning for torturing_tasks() rcutorture: Fix module unwind when bad torture_type specified rcu_sync: Cleanup the CONFIG_PROVE_RCU checks locking/percpu-rwsem: Clean up the lockdep annotations in percpu_down_read() locking/percpu-rwsem: Fix the comments outdated by rcu_sync locking/percpu-rwsem: Make use of the rcu_sync infrastructure locking/percpu-rwsem: Make percpu_free_rwsem() after kzalloc() safe ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull EFI changes from Ingo Molnar: "The main changes in this cycle were: - further EFI code generalization to make it more workable for ARM64 - various extensions, such as 64-bit framebuffer address support, UEFI v2.5 EFI_PROPERTIES_TABLE support - code modularization simplifications and cleanups - new debugging parameters - various fixes and smaller additions" * 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) efi: Fix warning of int-to-pointer-cast on x86 32-bit builds efi: Use correct type for struct efi_memory_map::phys_map x86/efi: Fix kernel panic when CONFIG_DEBUG_VIRTUAL is enabled efi: Add "efi_fake_mem" boot option x86/efi: Rename print_efi_memmap() to efi_print_memmap() efi: Auto-load the efi-pstore module efi: Introduce EFI_NX_PE_DATA bit and set it from properties table efi: Add support for UEFIv2.5 Properties table efi: Add EFI_MEMORY_MORE_RELIABLE support to efi_md_typeattr_format() efifb: Add support for 64-bit frame buffer addresses efi/arm64: Clean up efi_get_fdt_params() interface arm64: Use core efi=debug instead of uefi_debug command line parameter efi/x86: Move efi=debug option parsing to core drivers/firmware: Make efi/esrt.c driver explicitly non-modular efi: Use the generic efi.memmap instead of 'memmap' acpi/apei: Use appropriate pgprot_t to map GHES memory arm64, acpi/apei: Implement arch_apei_get_mem_attributes() arm64/mm: Add PROT_DEVICE_nGnRnE and PROT_NORMAL_WT acpi, x86: Implement arch_apei_get_mem_attributes() efi, x86: Rearrange efi_mem_attributes() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull wchan kernel address hiding from Ingo Molnar: "This fixes a wchan related information leak in /proc/PID/stat. There's a bit of an ABI twist to it: instead of setting the wchan field to 0 (which is our usual technique) we set it conditionally to a 0/1 flag to keep ABI compatibility with older procps versions that only fetches /proc/PID/wchan (symbolic names) if the absolute wchan address is nonzero" * 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/proc, core/debug: Don't expose absolute kernel addresses via wchan
-
由 Dan Carpenter 提交于
"nlb_pr_rq" can't be more than u32 because "len" is a u32. Later we truncate it to u32 anyway when we calculate min_t(). Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq updates from Thomas Gleixner: "The irq departement delivers: - Rework the irqdomain core infrastructure to accomodate ACPI based systems. This is required to support ARM64 without creating artificial device tree nodes. - Sanitize the ACPI based ARM GIC initialization by making use of the new firmware independent irqdomain core - Further improvements to the generic MSI management - Generalize the irq migration on CPU hotplug - Improvements to the threaded interrupt infrastructure - Allow the migration of "chained" low level interrupt handlers - Allow optional force masking of interrupts in disable_irq[_nosysnc] - Support for two new interrupt chips - Sigh! - A larger set of errata fixes for ARM gicv3 - The usual pile of fixes, updates, improvements and cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) Document that IRQ_NONE should be returned when IRQ not actually handled PCI/MSI: Allow the MSI domain to be device-specific PCI: Add per-device MSI domain hook of/irq: Use the msi-map property to provide device-specific MSI domain of/irq: Split of_msi_map_rid to reuse msi-map lookup irqchip/gic-v3-its: Parse new version of msi-parent property PCI/MSI: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Add support code for multi-parent version of "msi-parent" irqchip/gic-v3-its: Add handling of PCI requester id. PCI/MSI: Add helper function pci_msi_domain_get_msi_rid(). of/irq: Add new function of_msi_map_rid() Docs: dt: Add PCI MSI map bindings irqchip/gic-v2m: Add support for multiple MSI frames irqchip/gic-v3: Fix translation of LPIs after conversion to irq_fwspec irqchip/mxs: Add Alphascale ASM9260 support irqchip/mxs: Prepare driver for hardware with different offsets irqchip/mxs: Panic if ioremap or domain creation fails irqdomain: Documentation updates irqdomain/msi: Use fwnode instead of of_node ...
-