Noted by Joerg Roedel.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch enables the virtualization of the last branch record MSRs on
SVM if this feature is available in hardware. It also introduces a small
and simple check feature for specific SVM extensions.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove unused function

CC      drivers/kvm/svm.o
drivers/kvm/svm.c:207: warning: ‘inject_db’ defined but not used
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When a vcpu is migrated from one cpu to another, its timestamp counter
may lose its monotonic property if the host has unsynced timestamp counters.
This can confuse the guest, sometimes to the point of refusing to boot.

As the rdtsc instruction is rather fast on AMD processors (7-10 cycles),
we can simply record the last host tsc when we drop the cpu, and adjust
the vcpu tsc offset when we detect that we've migrated to a different cpu.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch forbids the guest to execute monitor/mwait instructions on
SVM. This is necessary because the guest can execute these instructions
if they are available even if the kvm cpuid doesn't report its
existence.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Trivial cleanup.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The cpu cache is a host resource; the guest should not be able to turn
it off (even for itself).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

set_cr0_no_modeswitch() was a hack to avoid corrupting segment registers.
As we now cache the protected mode values on entry to real mode, this
isn't an issue anymore, and it interferes with reboot (which usually _is_
a modeswitch).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The current string pio interface communicates using guest virtual addresses,
relying on userspace to translate addresses and to check permissions.  This
interface cannot fully support guest smp, as the check needs to take into
account two pages at one in case an unaligned string transfer straddles a
page boundary.

Change the interface not to communicate guest addresses at all; instead use
a buffer page (mmaped by userspace) and do transfers there.  The kernel
manages the virtual to physical translation and can perform the checks
atomically by taking the appropriate locks.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Older userspace didn't care, but newer userspace (with the cpuid changes)
does.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This is redundant, as we also return -EINTR from the ioctl, but it
allows us to examine the exit_reason field on resume without seeing
old data.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently, userspace is told about the nature of the last exit from the
guest using two fields, exit_type and exit_reason, where exit_type has
just two enumerations (and no need for more).  So fold exit_type into
exit_reason, reducing the complexity of determining what really happened.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

KVM used to handle cpuid by letting userspace decide what values to
return to the guest.  We now handle cpuid completely in the kernel.  We
still let userspace decide which values the guest will see by having
userspace set up the value table beforehand (this is necessary to allow
management software to set the cpu features to the least common denominator,
so that live migration can work).

The motivation for the change is that kvm kernel code can be impacted by
cpuid features, for example the x86 emulator.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently when passing the a PIO emulation request to userspace, we
rely on userspace updating %rax (on 'in' instructions) and %rsi/%rdi/%rcx
(on string instructions).  This (a) requires two extra ioctls for getting
and setting the registers and (b) is unfriendly to non-x86 archs, when
they get kvm ports.

So fix by doing the register fixups in the kernel and passing to userspace
only an abstract description of the PIO to be done.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instead of twiddling the rip registers directly, use the
skip_emulated_instruction() function to do that for us.
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Allocate a distinct inode for every vcpu in a VM.  This has the following
benefits:

 - the filp cachelines are no longer bounced when f_count is incremented on
   every ioctl()
 - the API and internal code are distinctly clearer; for example, on the
   KVM_GET_REGS ioctl, there is no need to copy the vcpu number from
   userspace and then copy the registers back; the vcpu identity is derived
   from the fd used to make the call

Right now the performance benefits are completely theoretical since (a) we
don't support more than one vcpu per VM and (b) virtualization hardware
inefficiencies completely everwhelm any cacheline bouncing effects.  But
both of these will change, and we need to prepare the API today.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch changes the SVM code to intercept SMIs and handle it
outside the guest.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

This adds a special MSR based hypercall API to KVM. This is to be
used by paravirtual kernels and virtual drivers.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

On hotplug, we execute the hardware extension enable sequence.  On unplug, we
decache any vcpus that last ran on the exiting cpu, and execute the hardware
extension disable sequence.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This allows us to run the mmu testsuite on amd.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kvm mmu relies on cr0.wp being set even if the guest does not set it.  The
vmx code correctly forces cr0.wp at all times, the svm code does not, so it
can't boot solaris without this patch.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix what looks like an obvious typo in the file drivers/kvm/svm.c.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Acked-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch implements forwarding of SHUTDOWN intercepts from the guest on to
userspace on AMD SVM.  A SHUTDOWN event occurs when the guest produces a
triple fault (e.g.  on reboot).  This also fixes the bug that a guest reboot
actually causes a host reboot under some circumstances.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's an obvious typo in svm_{get,set}_idt, causing it to access the ldt
instead.

Because these functions are only called for save/load on AMD, the bug does not
impact normal operation.  With the fix, save/load works as expected on AMD
hosts.
Signed-off-by: NUri Lublin <uril@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kvm mmio read path looks like:

 1. guest read faults
 2. kvm emulates read, calls emulator_read_emulated()
 3. fails as a read requires userspace help
 4. exit to userspace
 5. userspace emulates read, kvm sets vcpu->mmio_read_completed
 6. re-enter guest, fault again
 7. kvm emulates read, calls emulator_read_emulated()
 8. succeeds as vcpu->mmio_read_emulated is set
 9. instruction completes and guest is resumed

A problem surfaces if the userspace exit (step 5) also requests an interrupt
injection.  In that case, the guest does not re-execute the original
instruction, but the interrupt handler.  The next time an mmio read is
exectued (likely for a different address), step 3 will find
vcpu->mmio_read_completed set and return the value read for the original
instruction.

The problem manifested itself in a few annoying ways:
- little squares appear randomly on console when switching virtual terminals
- ne2000 fails under nfs read load
- rtl8139 complains about "pci errors" even though the device model is
  incapable of issuing them.

Fix by skipping interrupt injection if an mmio read is pending.

A better fix is to avoid re-entry into the guest, and re-emulating immediately
instead.  However that's a bit more complex.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds the profile=kvm boot option, which enables KVM to profile VM
exits.

Use: "readprofile -m ./System.map | sort -n" to see the resulting
output:

   [...]
   18246 serial_out                               148.3415
   18945 native_flush_tlb                         378.9000
   23618 serial_in                                212.7748
   29279 __spin_unlock_irq                        622.9574
   43447 native_apic_write                        2068.9048
   52702 enable_8259A_irq                         742.2817
   54250 vgacon_scroll                             89.3740
   67394 ide_inb                                  6126.7273
   79514 copy_page_range                           98.1654
   84868 do_wp_page                                86.6000
  140266 pit_read                                 783.6089
  151436 ide_outb                                 25239.3333
  152668 native_io_delay                          21809.7143
  174783 mask_and_ack_8259A                       783.7803
  362404 native_set_pte_at                        36240.4000
 1688747 total                                      0.5009
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

No need to test for rflags.if as both VT and SVM specs assure us that on exit
caused from interrupt window opening, 'if' is set.
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since we write protect shadowed guest page tables, there is no need to trap
page invalidations (the guest will always change the mapping before issuing
the invlpg instruction).
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When beginning to process a page fault, make sure we have enough shadow pages
available to service the fault.  If not, free some pages.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Hardware virtualization implementations allow the guests to freely change some
of the bits in cr0 and cr4, but trap when changing the other bits.  This is
useful to avoid excessive exits due to changing, for example, the ts flag.

It also means the kvm's copy of cr0 and cr4 may be stale with respect to these
bits.  most of the time this doesn't matter as these bits are not very
interesting.  Other times, however (for example when returning cr0 to
userspace), they are, so get the fresh contents of these bits from the guest
by means of a new arch operation.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The current interrupt injection mechanism might delay an interrupt under
the following circumstances:

 - if injection fails because the guest is not interruptible (rflags.IF clear,
   or after a 'mov ss' or 'sti' instruction).  Userspace can check rflags,
   but the other cases or not testable under the current API.
 - if injection fails because of a fault during delivery.  This probably
   never happens under normal guests.
 - if injection fails due to a physical interrupt causing a vmexit so that
   it can be handled by the host.

In all cases the guest proceeds without processing the interrupt, reducing
the interactive feel and interrupt throughput of the guest.

This patch fixes the situation by allowing userspace to request an exit
when the 'interrupt window' opens, so that it can re-inject the interrupt
at the right time.  Guest interactivity is very visibly improved.
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Resolves sourceforge bug 1622229 (guest crashes running benchmark software).
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>