- 02 11月, 2008 6 次提交
-
-
由 Jarek Poplawski 提交于
After removing netem classful functionality we are sure its inner qdisc is tfifo, so we can replace qdisc->ops->requeue() method with open code. After this patch there are no more ops->requeue() users. The idea of this patch is by Patrick McHardy. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Patrick McHardy noticed that: "a lot of the functionality of netem requires the inner tfifo anyways and rate-limiting is usually done on top of netem. So I would suggest so either hard-wire the tfifo qdisc or at least make the assumption that inner qdiscs are work-conserving.", and later: "- a lot of other qdiscs still don't work as inner qdiscs of netem [...]". So, according to his suggestion, this patch removes classful options of netem. The main reason of this change is to remove ops->requeue() method, which is currently used only by netem. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sangtae Ha 提交于
Signed-off-by: NSangtae Ha <sha2@ncsu.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jianjun Kong 提交于
clean up net/unix/af_unix.c garbage.c sysctl_net_unix.c Signed-off-by: NJianjun Kong <jianjun@zeuux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Corey Minyard spotted a missing memory barrier in udp_lib_get_port() We need to make sure a reader cannot read the new 'sk->sk_next' value and previous value of 'sk->sk_hash'. Or else, an item could be deleted from a chain, and inserted into another chain. If new chain was empty before the move, 'next' pointer is NULL, and lockless reader can not detect it missed following items in original chain. This patch is temporary, since we expect an upcoming patch to introduce another way of handling the problem. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
RFC4301 Section 7.1 says: "7.1. Tunnel Mode SAs that Carry Initial and Non-Initial Fragments All implementations MUST support tunnel mode SAs that are configured to pass traffic without regard to port field (or ICMP type/code or Mobility Header type) values. If the SA will carry traffic for specified protocols, the selector set for the SA MUST specify the port fields (or ICMP type/code or Mobility Header type) as ANY. An SA defined in this fashion will carry all traffic including initial and non-initial fragments for the indicated Local/Remote addresses and specified Next Layer protocol(s)." But for IPv6, fragment is treated as a protocol. This change catches protocol transported in fragmented packet. In IPv4, there is no problem. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2008 34 次提交
-
-
由 Johannes Berg 提交于
One parameter wasn't described and one I forgot to update when renaming it; also update TBDs in sta_info. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
It was being discussed where we would put this, but now it found a home so use its define. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
ath9k_hw_keyreset returns true in either branch. Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrey Borzenkov 提交于
If card is using downloadable firmware (like Agere 9.x), firmware has to be reloaded during resume. It is not possible to use request_firmware for that, because tasks are still frozen, so request_firmware will just timeout and fail. So cache firmware image in memory for later reuse in ->resume method. Signed-off-by: NAndrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrey Borzenkov 提交于
On resume card state is likely lost so we have to reload firmware again. Signed-off-by: NAndrey Borzenkov <arvidjaar@mail.ru> Acked-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Nick Kossifidis 提交于
*Properly get/set all available ISR/IMR values and review common/uncommon bits *Better handling of per-txq interrupts (we can now resolve what q is generating each interrupt -this will help in debuging wme later) *Some minor updates from legacy-hal *Properly handle RXNOFRM and TXNOFRM interrupt masking (even when we don't set them on IMR they keep showing up, so we disable them by zeroing AR5K_RXNOFRM and AR5K_TXNOFRM registers). This doesn't exist on legacy-hal but i've tested it on various cards and it works fine. Changes-Licensed-under: ISC Signed-Off-by: NNick Kossifidis <mickflemm@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This function is only used once, move it closer to its caller. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This function has a few WARNs that may eventually trigger when an AP sends rogue beacons, those must be removed. Some of the comments in the function are also inappropriate as this function is concerned with the global hint, not a per- wiphy thing (which a multidomain flag on a wiphy would imply). I'm convinced that we don't need to do anything to implement multi-domain capability as 802.11-2007 specifies it because it makes only two things mandatory: * starting of BSS/IBSS must have country information (this can easily be done with a mac80211 patch) * a STA must adopt the country information (we already have the framework for this) But we don't have anything implemented anyway for now. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The code needs to be split out and cleaned up, so as a first step remove the capability, to add it back in a subsequent patch as a separate function. Also remove the publically facing return value of the function and the wiphy argument. A number of internal functions go from being generic helpers to just being used for alpha2 setting. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The regdom struct is given to the core, so it might as well free it in error conditions. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Halperin 提交于
The reclaim flag should include REPLY_RX_MPDU_CMD in the list of commands issued by uCode. This is for safety in case the SEQ_RX_FRAME bit is set incorrectly. Signed-off-by: NDaniel Halperin <daniel.c.halperin@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Fabrice Bellet 提交于
The problem fixed here is that iwl3945_mac_get_tsf() returns 0, as the function is not implemented, and this is considered as a valid value by the mac layer in mlme.c:1605. The consequence is that the STA in ad-hoc mode is inserted/removed quite frequently due to IBSS merging. This patch fixes : http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1781 and https://bugzilla.redhat.com/show_bug.cgi?id=459401Signed-off-by: NFabrice Bellet <fabrice@bellet.info> Acked-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch drops unreadable usage of IWL_SET/GET_BITS16 in byte count tables handling This patch also cleans a bit the byte count table code and adds WARN_ON traps on invalid values This patch is pure cleanup, no functional changes. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohamed Abbas 提交于
In iwl_bg_request_scan function, if we could not send a scan command it will go to done. In done it does the right thing to call mac80211 with scan complete, but the problem is STATUS_SCAN_HW is still set causing any future scan to fail. Fix by clearing the scanning status bits if scan fails. Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel C. Halperin 提交于
The driver does not properly convert rate_n_flags to PLCP index for mimo3 packets. This makes mac80211 drop the packets Signed-off-by: NDaniel C. Halperin <daniel.c.halperin@intel.com> Reviewed-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
Since calibration framework is not HW specific remove 5000 and 4965 prefix This patch doesn't provide any functional changes only code renaming and movement Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch uses new parameters eeprom_ver and eeprom_calib_ver to support additional HW. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch makes sure that station table is not accessed with invalid station id in 4965 TX response path Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Reported-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch utilize 5000 new TX response command which contains all necessary information and avoids back referencing to the original TX frame. It also change handling of software queue tracking 4965 flow is aligned with changes as much as possible. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Reviewed-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Wireless HW without any dedicated queues for aggregation do not need the ampdu_queues mechanism present right now in mac80211. Since mac80211 is still incomplete wrt TX MQ changes, do not allow aggregation sessions for drivers that set ampdu_queues. This is only an interim hack until Intel fixes the requeue issue. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NLuis Rodriguez <Luis.Rodriguez@Atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrey Yurovsky 提交于
Eliminate the vif.type check in ieee80211_rx_h_action. This check is unnecessary (these action frames can be handled by all interface types) and currently prevents, for example, AP interfaces from handling BACK action frames such as ADDBA and DELBA requests. Signed-off-by: NAndrey Yurovsky <andrey@cozybit.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
A warning would be printed for every packet that is transmitted if the rate control information isn't setup. Change this to WARN_ON_ONCE. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We were also changing tx power even when we were not asked to, this enforces the change only when we are asked nicely. When not asked we simply try to use the max power, we don't tx power at all for rate control. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This enables hardware interrupt mitigation on RX. It should alleviate system interrupt load intelligently. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
sc_txintrperiod is currently set to 0 and never updated. We won't be using this, if anything we will consider using TX interrupt mitigation but that is different and not yet tested. So remove sc_txintrperiod and the pointless spin_lock_bh() on tx prepare. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We do not know what max power to allow until a device is targeting a channel, therefore only allow changing tx power if a channel is defined. Also make use of the channel's max power setting as defined by regulatory rules before allowing the user to use the requested power setting. If the user asked us to figure it out we use the max allowed by regulatory. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rami Rosen 提交于
This patch add a check on the return value of dev_alloc_skb() in ieee80211_sta_join_ibss() in net/mac80211/mlme.c. Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
There is quite a lot of overlap in definitions between these headers... Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Also change escape_ssid to print_ssid to match print_mac semantics. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Also use common backslash sequences like \t, \n, \r, and \\ as well as \0. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
It is unnecessary and of questionable value. Also remove is_empty_ssid, as it is also unnecessary. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-