- 16 2月, 2008 1 次提交
-
-
由 Igor Mammedov 提交于
Signed-off-by: NIgor Mammedov <niallain@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 14 2月, 2008 1 次提交
-
-
由 Steve French 提交于
Currently, when we get a prefixpath as part of mount, the kernel only changes the first character to be a '/' or '\' depending on whether posix extensions are enabled. This is problematic as it expects mount.cifs to pass in the correct delimiter in the rest of the prefixpath. But, mount.cifs may not know *what* the correct delimiter is. It's a chicken and egg problem. Note that mount.cifs should not do conversion of the prefixpath - if we want posix behavior then '\' is legal in a path (and we have had bugs in the distant path to prove to me that customers sometimes have apps that require '\'). The kernel code assumes that the path passed in is posix (and current code will handle the first path component fine but was broken for Windows mounts for "deep" prefixpaths unless the user specified a prefixpath with '\' deep in it. So e.g. with current kernel code: 1) mount to //server/share/dir1 will work to all server types 2) mount to //server/share/dir1/subdir1 will work to Samba 3) mount to //server/share/dir1\\subdir1 will work to Windows But case two would fail to Windows without the fix. With the kernel cifs module fix case two now works. First analyzed by Jeff Layton and Simo Sorce CC: Jeff Layton <jlayton@redhat.com> CC: Simo Sorce <simo@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 13 2月, 2008 4 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Shirish Pargaonkar 提交于
This patch fixes an error in the experimental cifs acl code. During chmod, set security descriptor data (num aces) is not sent with little-endian encoding. Signed-off-by: NShirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Roel Kluin 提交于
Although these experimental operations are not fully implemented, fix the typo in the definition of the quotactl operations for cifs. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Christoph had noticed too many ifdefs in the CIFS code making it hard to read. This patch removes about a quarter of them from the C files in cifs by improving a few key ifdefs in the .h files. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 08 2月, 2008 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 07 2月, 2008 1 次提交
-
-
由 Steve French 提交于
-
- 06 2月, 2008 32 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits) ide-tape: bump minor driver version ide-tape: cleanup the remaining codestyle issues ide-tape: fix syntax error in idetape_identify_device() ide-tape: remove leftover OnStream support warning ide-tape: collect module-related macro calls at the end ide-tape: include proper headers ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd() ide-tape: remove struct idetape_id_gcw ide-tape: cleanup and fix comments ide-tape: shorten some function names ide-tape: remove idetape_increase_max_pipeline_stages() ide-tape: struct idetape_tape_t: shorten member names v2 ide-tape: struct idetape_tape_t: remove unused members ide-tape: remove typedef idetape_chrdev_direction_t ide-tape: simplify code branching in the interrupt handler ide-tape: remove unreachable code chunk ide-tape: remove struct idetape_read_position_result_t ide-tape: refactor the debug logging facility ide: add ide_read_error() inline helper ide: add ide_read_[alt]status() inline helpers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc由 Linus Torvalds 提交于
* 'dmapool' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: pool: Improve memory usage for devices which can't cross boundaries Change dmapool free block management dmapool: Tidy up includes and add comments dmapool: Validate parameters to dma_pool_create Avoid taking waitqueue lock in dmapool dmapool: Fix style problems Move dmapool.c to mm/ directory
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
... thus decreasing checkpatch.pl errors to 0. Bart: - remove needless function prototypes while at it - remove needless parentheses while at it - add missing KERN_ level to ide_tape_probe() - other minor fixups Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Spotted by Sergei Shtylyov. CC: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Also, remove redundant ones and cleanup whitespace. Bart: - minor fixups Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
This function was being used only at one place so fold it in there. Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Shorten some member names not too aggressively since this driver might be gone anyway soon. Bart: - minor fixes Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
- last_frame_position: only being written to once - firmware_revision, product_id, vendor_id: used once, remove from struct idetape_tape_t and deal with them locally - firmware_revision_num: only written to once - tape_still_time_begin: completely unused - tape_still_time: never written to; remove corresponding code chunk - uncontrolled_last_pipeline_head: only once written to - blocks_in_buffer: only written to Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
.. and replace it with plain enums. Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
... by adding a new typedef function pointer idetape_io_buf in order to call the proper buffer i/o handler depending on the data direction. Bart: - move idetape_io_buf before idetape_pc_intr() comment Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
tape->speed_control is set to 1 in idetape_setup(), but, in calculate_speeds() its value is tested for being 0, 1, or 2. Remove the if-branches where tape->speed_control != 1 since they are never executed. Also, rename calculate_speeds() by adding driver's prefix as is with the other function names. Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
There should be no functional changes resulting from this patch. Bart: - remove needless "!!" Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Teach the debug logging macro to differentiate between log levels based on the type of debug level enabled specifically instead of a threshold-based one. Thus, convert tape->debug_level to a bitmask that is written to over /proc. Also, - cleanup and simplify the debug macro thus removing a lot of code lines, - get rid of unused debug levels, - adjust the loglevel at several places where it was simply missing (e.g. idetape_chrdev_open()) - move the tape ptr initialization up in idetape_chrdev_open() so that we can use it in the debug_log macro earlier in the function. Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
ide-cris.c: * Add cris_setup_ports() helper and use it instead of ide_setup_ports() (fixes random value being set in ->io_ports[IDE_IRQ_OFFSET]). buddha.c: * Add buddha_setup_ports() helper and use it instead of ide_setup_ports(). falconide.c: * Add falconide_setup_ports() helper and use it instead of ide_setup_ports(), also fix return value of falconide_init() while at it. gayle.c: * Add gayle_setup_ports() helper and use it instead of ide_setup_ports(). macide.c: * Add macide_setup_ports() helper and use it instead of ide_setup_ports() (fixes incorrect value being set in ->io_ports[IDE_IRQ_OFFSET]). q40ide.c: * Fix q40_ide_setup_ports() comments. ide.c: * Remove no longer needed ide_setup_ports(). Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Same BUG_ON() is present inside ide_set_handler(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Remove write-only ->sata_misc[] from ide_hwif_t. * Remove no longer used SATA_{MISC,PHY,IEN}_OFFSET defines. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef in check_media_bay() by CONFIG_MAC_FLOPPY one. * Replace incorrect CONFIG_BLK_DEV_IDE #ifdef-s by CONFIG_BLK_DEV_IDE_PMAC ones. * check_media_bay() is used only by drivers/block/swim3.c so make this function available only if CONFIG_MAC_FLOPPY is defined. * check_media_bay_by_base() and media_bay_set_ide_infos() are used only by drivers/ide/ppc/pmac.c so so make these functions available only if CONFIG_MAC_FLOPPY is defined. v2: * Remove ifdefs from function prototypes. (Andrew Morton) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Denis Cheng 提交于
with module_param macro, the __setup code can be killed now: const __setup("all-generic-ide", ide_generic_all_on); and the module name "generic.ko" is not descriptive to its functionality, can be changed in Makefile, the "ide-pci-generic.ko" is better. the ide-pci-generic.all-generic-ide parameter also documented in Documentation/kernel-parameters.txt Signed-off-by: NDenis Cheng <crquan@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Andrew Morton 提交于
drivers/ide/legacy/hd.c: In function 'hd_request': drivers/ide/legacy/hd.c:424: warning: 'stat' may be used uninitialized in this function gcc is being stupid. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Andrew Morton 提交于
drivers/ide/ide-acpi.c: In function 'ide_acpi_init': drivers/ide/ide-acpi.c:175: warning: 'dev_handle' may be used uninitialized in this function Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Anton Salnikov 提交于
This is Palmchip BK3710 IDE controller support. The IDE controller logic supports PIO, MultiWord-DMA and Ultra-DMA modes. Supports interface to Compact Flash (CF) configured in True-IDE mode. Bart: - remove dead code - fix ide_hwif_setup_dma() build problem Signed-off-by: NAnton Salnikov <asalnikov@ru.mvista.com> Reviewed-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Reviewed-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
On Tuesday 05 February 2008, Linus Torvalds wrote: > > On Sat, 2 Feb 2008, Bartlomiej Zolnierkiewicz wrote: > > > > * next part of IDE probing code re-organization saga > > (that would be me) > > This seems to cause very irritating and bogus messages for me: > > Probing IDE interface ide0... > Probing IDE interface ide1... > ide2: I/O resource 0x0-0x7 not free. > ide2: ports already in use, skipping probe > ide3: I/O resource 0x0-0x7 not free. > ide3: ports already in use, skipping probe > ide4: I/O resource 0x0-0x7 not free. > ide4: ports already in use, skipping probe > ide5: I/O resource 0x0-0x7 not free. > ide5: ports already in use, skipping probe > ide6: I/O resource 0x0-0x7 not free. > ide6: ports already in use, skipping probe > ide7: I/O resource 0x0-0x7 not free. > ide7: ports already in use, skipping probe > ide8: I/O resource 0x0-0x7 not free. > ide8: ports already in use, skipping probe > ide9: I/O resource 0x0-0x7 not free. > ide9: ports already in use, skipping probe > > and that's just totally bogus. It shouldn't even request that region, > since it's not been allocated! The commit 139ddfca ("ide: move handling of I/O resources out of ide_probe_port()") changed the ordering of hwif->noprobe check vs ide_hwif_request_regions() call (so that we now reserve I/O regions before checking for hwif->noprobe). However ide-generic host driver depended on hwif->noprobe to be set for skipping probing of empty ide_hwifs[] slots. Fix it by passing only indexes of non-empty slots to ide_device_add_all() from ide_generic_init(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Andrew Morton 提交于
smbfs is a bit buggy and has no maintainer. Change it to shout at the user on the first five mount attempts - tell them to switch to CIFS. Come December we'll mark it BROKEN and see what happens. [olecom@flower.upol.cz: documentation update] Cc: Urban Widmark <urban@teststation.com> Acked-by: NSteven French <sfrench@us.ibm.com> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Cc: Jeff Layton <jlayton@redhat.com> Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-