- 21 4月, 2015 6 次提交
-
-
由 Suresh E. Warrier 提交于
Add counters to track number of times we switch from guest real mode to host virtual mode during an interrupt-related hyper call because the hypercall requires actions that cannot be completed in real mode. This will help when making optimizations that reduce guest-host transitions. It is safe to use an ordinary increment rather than an atomic operation because there is one ICP per virtual CPU and kvmppc_xics_rm_complete() only works on the ICP for the current VCPU. The counters are displayed as part of IPC and ICP state provided by /sys/debug/kernel/powerpc/kvm* for each VM. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aneesh Kumar K.V 提交于
This adds helper routines for locking and unlocking HPTEs, and uses them in the rest of the code. We don't change any locking rules in this patch. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aneesh Kumar K.V 提交于
We don't support real-mode areas now that 970 support is removed. Remove the remaining details of rma from the code. Also rename rma_setup_done to hpte_setup_done to better reflect the changes. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Michael Ellerman 提交于
Some PowerNV systems include a hardware random-number generator. This HWRNG is present on POWER7+ and POWER8 chips and is capable of generating one 64-bit random number every microsecond. The random numbers are produced by sampling a set of 64 unstable high-frequency oscillators and are almost completely entropic. PAPR defines an H_RANDOM hypercall which guests can use to obtain one 64-bit random sample from the HWRNG. This adds a real-mode implementation of the H_RANDOM hypercall. This hypercall was implemented in real mode because the latency of reading the HWRNG is generally small compared to the latency of a guest exit and entry for all the threads in the same virtual core. Userspace can detect the presence of the HWRNG and the H_RANDOM implementation by querying the KVM_CAP_PPC_HWRNG capability. The H_RANDOM hypercall implementation will only be invoked when the guest does an H_RANDOM hypercall if userspace first enables the in-kernel H_RANDOM implementation using the KVM_CAP_PPC_ENABLE_HCALL capability. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 David Gibson 提交于
On POWER, storage caching is usually configured via the MMU - attributes such as cache-inhibited are stored in the TLB and the hashed page table. This makes correctly performing cache inhibited IO accesses awkward when the MMU is turned off (real mode). Some CPU models provide special registers to control the cache attributes of real mode load and stores but this is not at all consistent. This is a problem in particular for SLOF, the firmware used on KVM guests, which runs entirely in real mode, but which needs to do IO to load the kernel. To simplify this qemu implements two special hypercalls, H_LOGICAL_CI_LOAD and H_LOGICAL_CI_STORE which simulate a cache-inhibited load or store to a logical address (aka guest physical address). SLOF uses these for IO. However, because these are implemented within qemu, not the host kernel, these bypass any IO devices emulated within KVM itself. The simplest way to see this problem is to attempt to boot a KVM guest from a virtio-blk device with iothread / dataplane enabled. The iothread code relies on an in kernel implementation of the virtio queue notification, which is not triggered by the IO hcalls, and so the guest will stall in SLOF unable to load the guest OS. This patch addresses this by providing in-kernel implementations of the 2 hypercalls, which correctly scan the KVM IO bus. Any access to an address not handled by the KVM IO bus will cause a VM exit, hitting the qemu implementation as before. Note that a userspace change is also required, in order to enable these new hcall implementations with KVM_CAP_PPC_ENABLE_HCALL. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> [agraf: fix compilation] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Suresh E. Warrier 提交于
Export __spin_yield so that the arch_spin_unlock() function can be invoked from a module. This will be required for modules where we want to take a lock that is also is acquired in hypervisor real mode. Because we want to avoid running any lockdep code (which may not be safe in real mode), this lock needs to be an arch_spinlock_t instead of a normal spinlock. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Acked-by: NPaul Mackerras <paulus@samba.org> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 14 4月, 2015 34 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver updates from Greg KH: "Here's the big staging driver patchset for 4.1-rc1. There's a lot of patches here, the Outreachy application period happened during this development cycle, so that means that there was a lot of cleanup patches accepted. Other than the normal coding style and sparse fixes here, there are some driver updates and work toward making some of the drivers into "mergable" shape (like the Unisys drivers.) All of these have been in linux-next for a while" * tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits) staging: lustre: orthography & coding style staging: lustre: lnet: lnet: fix error return code staging: lustre: fix sparse warning Revert "Staging: sm750fb: Fix C99 Comments" Staging: rtl8192u: use correct array for debug output staging: rtl8192e: Remove dead code staging: rtl8192e: Comment cleanup (style/format) staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp() staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp() staging: rtl8192e: Divide rtllib_rx_auth() staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning staging: rtl8192e: Fix BRACES warning staging: rtl8192e: Fix LINE_CONTINUATIONS warning staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro staging: rtl8192e: Fix RETURN_VOID warnings staging: rtl8192e: Fix UNNECESSARY_ELSE warning staging: rtl8723au: Remove unneeded comments staging: rtl8723au: Use __func__ in trace logs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core updates from Greg KH: "Here's the driver-core / kobject / lz4 tree update for 4.1-rc1. Everything here has been in linux-next for a while with no reported issues. It's mostly just coding style cleanups, with other minor changes in here as well, nothing big" * tag 'driver-core-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) debugfs: allow bad parent pointers to be passed in stable_kernel_rules: Add clause about specification of kernel versions to patch. kobject: WARN as tip when call kobject_get() to a kobject not initialized lib/lz4: Pull out constant tables drivers: platform: parse IRQ flags from resources driver core: Make probe deferral more quiet drivers/core/of: Add symlink to device-tree from devices with an OF node device: Add dev_of_node() accessor drivers: base: fw: fix ret value when loading fw firmware: Avoid manual device_create_file() calls drivers/base: cacheinfo: validate device node for all the caches drivers/base: use tabs where possible in code indentation driver core: add missing blank line after declaration drivers: base: node: Delete space after pointer declaration drivers: base: memory: Use tabs instead of spaces firmware_class: Fix whitespace and indentation drivers: base: dma-mapping: Erase blank space after pointer drivers: base: class: Add a blank line after declarations attribute_container: fix missing blank lines after declarations drivers: base: memory: Fix switch indent ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB driver updates from Greg KH: "Here's the big USB (and PHY) driver patchset for 4.1-rc1. Everything here has been in linux-next, and the full details are below in the shortlog. Nothing major, just the normal round of new drivers,api updates, and other changes, mostly in the USB gadget area, as usual" * tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (252 commits) drivers/usb/core: devio.c: Removed an uneeded space before tab usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume usb: chipidea: debug: add low power mode check before print registers usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm mode usb: core: hub: use new USB_RESUME_TIMEOUT usb: isp1760: hcd: use new USB_RESUME_TIMEOUT usb: dwc2: hcd: use new USB_RESUME_TIMEOUT usb: host: sl811: use new USB_RESUME_TIMEOUT usb: host: r8a66597: use new USB_RESUME_TIMEOUT usb: host: oxu210hp: use new USB_RESUME_TIMEOUT usb: host: fusbh200: use new USB_RESUME_TIMEOUT usb: host: fotg210: use new USB_RESUME_TIMEOUT usb: host: isp116x: use new USB_RESUME_TIMEOUT usb: musb: use new USB_RESUME_TIMEOUT usb: host: uhci: use new USB_RESUME_TIMEOUT usb: host: ehci: use new USB_RESUME_TIMEOUT usb: host: xhci: use new USB_RESUME_TIMEOUT usb: define a generic USB_RESUME_TIMEOUT macro usb: musb: dsps: fix build on i386 when COMPILE_TEST is set ehci-hub: use USB_DT_HUB ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup updates from Tejun Heo: "Nothing too interesting. Rik made cpuset cooperate better with isolcpus and there are several other cleanup patches" * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset, isolcpus: document relationship between cpusets & isolcpus cpusets, isolcpus: exclude isolcpus from load balancing in cpusets sched, isolcpu: make cpu_isolated_map visible outside scheduler cpuset: initialize cpuset a bit early cgroup: Use kvfree in pidlist_free() cgroup: call cgroup_subsys->bind on cgroup subsys initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata updates from Tejun Heo: - Hannes's patchset implements support for better error reporting introduced by the new ATA command spec. - the deperecated pci_ dma API usages have been replaced by dma_ ones. - a bunch of hardware specific updates and some cleanups. * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: remove deprecated use of pci api ahci: st: st_configure_oob must be called after IP is clocked. ahci: st: Update the ahci_st DT documentation ahci: st: Update the DT example for how to obtain the PHY. sata_dwc_460ex: indent an if statement libata: Add tracepoints libata-eh: Set 'information' field for autosense libata: Implement support for sense data reporting libata: Implement NCQ autosense libata: use status bit definitions in ata_dump_status() ide,ata: Rename ATA_IDX to ATA_SENSE libata: whitespace fixes in ata_to_sense_error() libata: whitespace cleanup in ata_get_cmd_descript() libata: use READ_LOG_DMA_EXT libata: remove ATA_FLAG_LOWTAG sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev sata_dwc_460ex: move to generic DMA driver sata_dwc_460ex: join messages back sata: xgene: add ACPI support for APM X-Gene SATA ports ata: sata_mv: add proper definitions for LP_PHY_CTL register values
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue updates from Tejun Heo: "Workqueue now prints debug information at the end of sysrq-t which should be helpful when tracking down suspected workqueue stalls. It only prints out the ones with something currently going on so it shouldn't add much output in most cases" * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Reorder sysfs code percpu: Fix trivial typos in comments workqueue: dump workqueues on sysrq-t workqueue: keep track of the flushing task and pool manager workqueue: make the workqueues list RCU walkable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq core updates from Thomas Gleixner: "Managerial summary: Core code: - final removal of IRQF_DISABLED - new state save/restore functions for virtualization support - wakeup support for stacked irqdomains - new function to solve the netpoll synchronization problem irqchips: - new driver for STi based devices - new driver for Vybrid MSCM - massive cleanup of the GIC driver by moving the GIC-addons to stacked irqdomains - the usual pile of fixes and updates to the various chip drivers" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) irqchip: GICv3: Add support for irq_[get, set]_irqchip_state() irqchip: GIC: Add support for irq_[get, set]_irqchip_state() genirq: Allow the irqchip state of an IRQ to be save/restored genirq: MSI: Fix freeing of unallocated MSI irqchip: renesas-irqc: Add wake-up support irqchip: armada-370-xp: Allow using wakeup source irqchip: mips-gic: Add new functions to start/stop the GIC counter irqchip: tegra: Add Tegra210 support irqchip: digicolor: Move digicolor_set_gc to init section irqchip: renesas-irqc: Add functional clock to bindings irqchip: renesas-irqc: Add minimal runtime PM support irqchip: renesas-irqc: Add more register documentation DT: exynos: update PMU binding ARM: exynos4/5: convert pmu wakeup to stacked domains irqchip: gic: Don't complain in gic_get_cpumask() if UP system ARM: zynq: switch from gic_arch_extn to gic_set_irqchip_flags ARM: ux500: switch from gic_arch_extn to gic_set_irqchip_flags ARM: shmobile: remove use of gic_arch_extn.irq_set_wake irqchip: gic: Add an entry point to set up irqchip flags ARM: omap: convert wakeupgen to stacked domains ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI changes from Bjorn Helgaas: "Enumeration - Read capability list as dwords, not bytes (Sean O. Stalley) Resource management - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas) - Mark invalid BARs as unassigned (Bjorn Helgaas) - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas) - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas) - Assign resources before drivers claim devices (Yijing Wang) - Claim bus resources before pci_bus_add_devices() (Yijing Wang) Power management - Optimize device state transition delays (Aaron Lu) - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett) Virtualization - Add ACS quirks for Intel 1G NICs (Alex Williamson) IOMMU - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri) - Move of_dma_configure() to device.c to help re-use (Murali Karicheri) - Fix size when dma-range is not used (Murali Karicheri) - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri) - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri) - Update DMA configuration from DT (Murali Karicheri) - dma-mapping: limit IOMMU mapping size (Murali Karicheri) - Calculate device DMA masks based on DT dma-range size (Murali Karicheri) ARM Versatile host bridge driver - Check for devm_ioremap_resource() failures (Jisheng Zhang) Broadcom iProc host bridge driver - Add Broadcom iProc PCIe driver (Ray Jui) Marvell MVEBU host bridge driver - Add suspend/resume support (Thomas Petazzoni) Renesas R-Car host bridge driver - Fix position of MSI enable bit (Nobuhiro Iwamatsu) - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu) - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu) - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu) Samsung Exynos host bridge driver - Fix INTx enablement statement termination error (Jaehoon Chung) Miscellaneous - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu) - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)" * tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits) PCI: Read capability list as dwords, not bytes PCI: layerscape: Simplify platform_get_resource_byname() failure checking PCI: keystone: Don't dereference possible NULL pointer PCI: versatile: Check for devm_ioremap_resource() failures PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message PCI: exynos: Fix INTx enablement statement termination error PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules PCI: Add ACS quirks for Intel 1G NICs PCI: mvebu: Add suspend/resume support PCI: Cleanup control flow sparc/PCI: Claim bus resources before pci_bus_add_devices() PCI: Assign resources before drivers claim devices (pci_scan_root_bus()) PCI: Fail pci_ioremap_bar() on unassigned resources ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi由 Linus Torvalds 提交于
Pull HSI changes from Sebastian Reichel: - nokia-modem: support speech data - misc fixes * tag 'hsi-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: cmt_speech: fix error return code HSI: nokia-modem: Add cmt-speech support HSI: cmt_speech: Add cmt-speech driver HSI: nokia-modem: fix error return code
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
Pull power supply and reset changes from Sebastian Reichel: - new API for safe access of power supply function attrs - devres support for power supply (un)registration - new drivers / chips: - generic syscon based poweroff driver - iio & charger driver for da9150 - fuel gauge driver for axp288 - bq27x00: add support for bq27510 - bq2415x: add support for bq24157s - twl4030-madc-battery: convert to iio consumer - misc fixes * tag 'for-v4.1' of git://git.infradead.org/battery-2.6: (66 commits) power: twl4030_madc_battery: Add missing MODULE_ALIAS power: twl4030-madc-battery: Convert to iio consumer. dt: power: Add docs for generic SYSCON poweroff driver. power: reset: Add generic SYSCON register mapped poweroff. power: max17042_battery: add missed blank power: max17042_battery: Use reg type instead of chip type power/reset: at91: big endian fixes for atsama5d3x power_supply: charger-manager: Fix dereferencing of ERR_PTR HID: input: Fix NULL pointer dereference when power_supply_register fails power: constify of_device_id array power/reset/rmobile-reset.c: Fix !HAS_IOMEM build power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable arm: mach-pxa: Decrement the power supply's device reference counter mfd: ab8500: Decrement the power supply's device reference counter power_supply: bq2415x_charger: Decrement the power supply's device reference counter power_supply: 88pm860x_charger: Decrement the power supply's device reference counter x86/olpc/xo15/sci: Use newly added power_supply_put API x86/olpc/xo1/sci: Use newly added power_supply_put API power_supply: charger-manager: Decrement the power supply's device reference counter power_supply: Increment power supply use counter when obtaining references ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator updates from Mark Brown: "Another release, another set of regulator updates. Not much of it is showing up in the code yet but there's been a lot of discussion going on about how to enhance the regulator API to work better with modern SoCs which have a microcontroller sitting between Linux and the hardware. I'm hopeful that'll start to come through into mainline for v4.2 but it's not quite there for v4.1 - what we do have (along with the usual small updates is) is: - work from Bjorn Andersson on refactoring the configuration of regulator loading interfaces to be useful for use with microcontrollers, the existing interfaces were never actually useful for anything as-is since nobody was willing to put enough data into public code. - a summary tree display in debugfs from Heiko Stübner. - support for act6000 regulators" * tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits) regulator: max8660: Handle empty regulator data regulator: output current-limit for all regulators in summary regulator: add a summary tree in debugfs regulator: qcom: Tidy up probe() regulator: qcom: Rework to single platform device regulator: qcom: Refactor of-parsing code regulator: qcom: Don't enable DRMS in driver regulator: max8660: fix assignment of pdata to data that becomes dead regulator: Defer lookup of supply to regulator_get mfd: max77693: Remove unused structures regulator: max77693: Let core parse DT and drop board files support regulator: Ensure unique regulator debugfs directory names regulator: stw481x: Remove unused fields from struct stw481x regulator: palmas: Add has_regen3 check for TPS659038 regulator: constify of_device_id array regulator: fixes for regulator_set_optimum_mode name change regulator: Drop temporary regulator_set_optimum_mode wrapper usb: phy: phy-msm-usb: Rename regulator_set_optimum_mode usb: phy: ab8500-usb: Rename regulator_set_optimum_mode ufs: Rename of regulator_set_optimum_mode ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi updates from Mark Brown: "Only one framework update this time around, a change from Lars-Peter to move full to pm_ops and remove the legacy bus PM ops. Otherwise it's all driver updates: - make the spidev driver complain loudly if registered as spidev with DT rather than with a compatible string, hopefully helping people avoid making that mistake. - error handling and robustness fixes for the Designware and Intel MID drivers from Andy Shevchenko. - substantial performance improvements for the Raspberry Pi driver from Martin Sperl. - several new features for spidev_test from Adrian Remonda and Ian Abbott" * tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits) spi: bcm2835: enabling polling mode for transfers shorter than 30us spi: bcm2835: transform native-cs to gpio-cs on first spi_setup spi: img-spfi: Control CS lines with GPIO spi: img-spfi: Reset controller after each message spi: img-spfi: Implement a handle_err() callback spi: img-spfi: Setup TRANSACTION register before CONTROL register spi: Make master->handle_err() callback optional to avoid crashes spi: img-spfi: Limit bit clock to 1/4th of input clock spi: img-spfi: Implement a prepare_message() callback spi: fsl-dspi: Add ~50ns delay between cs and sck spi: fsl-dspi: Add cs-sck delays spi: fsl-dspi: Fix clock rate scale values spi: signedness bug in qspi_trigger_transfer_out_int() spi: imx: read back the RX/TX watermark levels earlier spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers() spi: bitbang: only toggle bitchanges spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() spi: fsl-dspi: Fix clock rate scale values spi: Using Trigger number to transmit/receive data spi: bcm2835: fill FIFO before enabling interrupts to reduce interrupts/message ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap由 Linus Torvalds 提交于
Pull regmap update from Mark Brown: "Just one patch for regmap this time around, a change from Steven Rostedt to prettify the way we're making the regmap internal header available to the trace events (it turns out that the trace subsystem doesn't actually need to be in trace/events)" * tag 'regmap-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Move tracing header into drivers/base/regmap
-
git://git.linaro.org/people/ulf.hansson/mmc由 Linus Torvalds 提交于
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for marking HPI as broken through devicetree - Enable runtime PM management of host devices - Remove the ->enable|disable() callbacks - Restructure code and cleanups - Refreshed some of the MMC sections in MAINTAINERS MMC host: - dw_mmc: HS400 mode support - dw_mmc: Add the cmd11 timer to detect a timeout - dw_mmc: Endian agnostic IO accessors - dw_mmc: Bugfixes - sh_mmcif: Add exclusion between cmd and interrupt - omap_hsmmc: Hibernation support - omap_hsmmc: Rework and simplify cover/card detect - omap_hsmmc: Stop using ->enable|disable() callbacks - atmel-mci: Endian agnostic IO - sunxi: Enable MMC_CAP_SDIO_IRQ - sdhci-st: Add support for the stih407 family silicon - sdhci-st: UHS card support in SDR104 mode - sdhci-st: HS200 mode support - sdhci-esdhc-imx: Use common mmc DT parser - sdhci-of-arasan: Use common mmc DT parser - sdhci-iproc: Add new driver for Broadcom IPROC SDHCI controller - sdhci-tegra: Convert to GPIO descriptors - sdhci-tegra: Optmize write_w path for tegra114 and later - sdhci-sirf: Update tuning procedure - sdhci: Fix card presence logic - sdhci: Cleanups and consolidation" * tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc: (79 commits) mmc: sdhci-st: Update ST SDHCI binding documentation. mmc: sdhci-st: Update the quirks for this controller. mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function. mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers. mmc: sdhci-st: Add delay management functions for top registers (eMMC). mmc: sdhci-st: Add support for de-asserting reset signal and top regs resource mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss glue regs mmc: sdhci-esdhc-imx: Call mmc_of_parse() mmc: dw_mmc: Add locking around cmd11 timer mmc: dw_mmc: Add a return in an unexpected cmd11 timeout mmc: dw_mmc: Increase cmd11 timeout to 500ms mmc: dw_mmc: fix fifo ordering in big endian mmc: dw_mmc: change idmac descriptor files to __le32 mmc: dw_mmc: make IO accessors endian agnostic mmc: core: Convert the error field in struct mmc_command|data into an int mmc: sdhci-of-arasan: Call OF parsing for MMC mmc: sdhci-pci: fix 64 BIT DMA quirks for rtsx mmc: Add support for marking hpi as broken through devicetree mmc: sdhci-tegra: convert to use GPIO descriptors mmc: omap_hsmmc: use generic slot-gpio isr to manage card detect pin ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
Pull EDAC updates from Borislav Petkov: - convert a bunch of drivers to static attribute groups (Takashi Iwai) - misc cleanups * tag 'edac_for_4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Constify of_device_id array EDAC, i82443bxgx: Don't export static symbol EDAC, amd64_edac: Get rid of per-node driver instances EDAC: Properly unwind on failure path in edac_init() EDAC: highbank: Use static attribute groups for sysfs entries EDAC: octeon: Use static attribute groups for sysfs entries EDAC: mpc85xx: Use static attribute groups for sysfs entries EDAC: i7core: Use static attribute groups for sysfs entries EDAC: i7core: Return proper error codes for kzalloc() errors EDAC: amd64: Use static attribute groups EDAC: Allow to pass driver-specific attribute groups EDAC: Use static attribute groups for managing sysfs entries EDAC: Delete unnecessary checks before pci_dev_put()
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Support for new chips: - add support for IT8620E, IT8781F, IT8786E, and IT8790E to it87 driver - add driver for NCT7904 Functional improvements: - support for new devicetree structure in ibmpowernv driver - register pwm-fan and gpio-fan drivers as thermal cooling devices - various minor cleanup and improvements to it87, nct6775, jc42, ibmpex, and coretemp drivers" * tag 'hwmon-for-linus-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (43 commits) hwmon: (pwm-fan) Update the duty cycle inorder to control the pwm-fan hwmon: (it87) Use feature macros on sio_data hwmon: (ibmpowernv) Fix build error seen for some configurations hwmon: (gpio-fan) Move the thermal registration after registration is complete hwmon: (ibmpowernv) pretty print labels hwmon: (ibmpowernv) add a label attribute hwmon: (ibmpowernv) add support for the new device tree hwmon: (ibmpowernv) add a helper routine create_hwmon_attr hwmon: (it87) Add support for 6th fan of IT8620E hwmon: (it87) Add support for IT8620E hwmon: (it87) Add support for IT8790E hwmon: (it87) Introduce feature flag to reflect internal in7 sensor hwmon: (it87) Introduce configuration field for chip suffix hwmon: (it87) Fix PWM frequency display for chips with newer PWM control hwmon: (it87) Fix pwm sysfs attribute removal hwmon: (ibmpowernv) do not use the OPAL index for hwmon attribute names hwmon: (ibmpowernv) change create_hwmon_attr_name() prototype hwmon: (ibmpowernv) add a convert_opal_attr_name() routine hwmon: (ibmpowernv) add a get_sensor_type() routine hwmon: (ibmpowernv) replace AMBIENT_TEMP by TEMP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32由 Linus Torvalds 提交于
Pull avr32 fix from Hans-Christian Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: fix integer overflow in ELF_ET_DYN_BASE
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mac: Fix out-of-bounds array index in OSS IRQ source initialization m68k/pci: Remove a superflous KERN_ERR m68k/defconfig: Update defconfigs for v4.0-rc1 m68k/q40: Make NE2000 builtin instead of modular m68k: Remove FSF address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 vdso changes from Ingo Molnar: "Misc vDSO updates" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Remove x32 intermediates during 'make clean' x86/vdso: Teach 'make clean' to remove generated vdso-image-*.c files x86/vdso32/syscall.S: Do not load __USER32_DS to %ss x86/vdso: Fix the x86 vdso2c tool includes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fix from Ingo Molnar: "Leftover from 4.0 Fix a local stack variable corruption with certain kdump usage patterns (Dave Young)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/numa: Fix kernel stack corruption in numa_init()->numa_clear_kernel_node_hotplug()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 RAS changes from Ingo Molnar: "The main changes in this cycle were: - Simplify the CMCI storm logic on Intel CPUs after yet another report about a race in the code (Borislav Petkov) - Enable the MCE threshold irq on AMD CPUs by default (Aravind Gopalakrishnan) - Add AMD-specific MCE-severity grading function. Further error recovery actions will be based on its output (Aravind Gopalakrishnan) - Documentation updates (Borislav Petkov) - ... assorted fixes and cleanups" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/severity: Fix warning about indented braces x86/mce: Define mce_severity function pointer x86/mce: Add an AMD severities-grading function x86/mce: Reindent __mcheck_cpu_apply_quirks() properly x86/mce: Use safe MSR accesses for AMD quirk x86/MCE/AMD: Enable thresholding interrupts by default if supported x86/MCE: Make mce_panic() fatal machine check msg in the same pattern x86/MCE/intel: Cleanup CMCI storm logic Documentation/acpi/einj: Correct and streamline text x86/MCE/AMD: Drop bogus const modifier from AMD's bank4_names()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 platform change from Ingo Molnar: "An Intel Quark SoC fix" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel/quark: Run IMR self-test on IMR capble hw only
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 mm changes from Ingo Molnar: "The main changes in this cycle were: - reduce the x86/32 PAE per task PGD allocation overhead from 4K to 0.032k (Fenghua Yu) - early_ioremap/memunmap() usage cleanups (Juergen Gross) - gbpages support cleanups (Luis R Rodriguez) - improve AMD Bulldozer (family 0x15) ASLR I$ aliasing workaround to increase randomization by 3 bits (per bootup) (Hector Marco-Gisbert) - misc fixlets" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Improve AMD Bulldozer ASLR workaround x86/mm/pat: Initialize __cachemode2pte_tbl[] and __pte2cachemode_tbl[] in a bit more readable fashion init.h: Clean up the __setup()/early_param() macros x86/mm: Simplify probe_page_size_mask() x86/mm: Further simplify 1 GB kernel linear mappings handling x86/mm: Use early_param_on_off() for direct_gbpages init.h: Add early_param_on_off() x86/mm: Simplify enabling direct_gbpages x86/mm: Use IS_ENABLED() for direct_gbpages x86/mm: Unexport set_memory_ro() and set_memory_rw() x86/mm, efi: Use early_ioremap() in arch/x86/platform/efi/efi-bgrt.c x86/mm: Use early_memunmap() instead of early_iounmap() x86/mm/pat: Ensure different messages in STRICT_DEVMEM and PAT cases x86/mm: Reduce PAE-mode per task pgd allocation overhead from 4K to 32 bytes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 microcode changes from Ingo Molnar: "Microcode driver updates: mostly cleanups but also some fixes (Borislav Petkov)" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/amd: Drop the pci_ids.h dependency x86/microcode/intel: Fix printing of microcode blobs in show_saved_mc() x86/microcode/intel: Check scan_microcode()'s retval x86/microcode/intel: Sanitize microcode_pointer() x86/microcode/intel: Move mc arg last in get_matching_{microcode|sig} x86/microcode/intel: Simplify generic_load_microcode_early() x86/microcode: Consolidate family,model, ... code x86/microcode/intel: Rename update_match_revision() x86/microcode/intel: Sanitize _save_mc() x86/microcode/intel: Make _save_mc() return the updated saved count x86/microcode/intel: Simplify load_ucode_intel_bsp() x86/microcode/intel: Get rid of last arg to load_ucode_intel_bsp() x86/microcode/intel: Do the mc_saved_src NULL check first x86/microcode/intel: Check if microcode was found before applying x86/microcode/intel: Fix out of bounds memory access to the extended header
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fpu changes from Ingo Molnar: "Various x86 FPU handling cleanups, refactorings and fixes (Borislav Petkov, Oleg Nesterov, Rik van Riel)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/fpu: Kill eager_fpu_init_bp() x86/fpu: Don't allocate fpu->state for swapper/0 x86/fpu: Rename drop_init_fpu() to fpu_reset_state() x86/fpu: Fold __drop_fpu() into its sole user x86/fpu: Don't abuse drop_init_fpu() in flush_thread() x86/fpu: Use restore_init_xstate() instead of math_state_restore() on kthread exec x86/fpu: Introduce restore_init_xstate() x86/fpu: Document user_fpu_begin() x86/fpu: Factor out memset(xstate, 0) in fpu_finit() paths x86/fpu: Change xstateregs_get()/set() to use ->xsave.i387 rather than ->fxsave x86/fpu: Don't abuse FPU in kernel threads if use_eager_fpu() x86/fpu: Always allow FPU in interrupt if use_eager_fpu() x86/fpu: __kernel_fpu_begin() should clear fpu_owner_task even if use_eager_fpu() x86/fpu: Also check fpu_lazy_restore() when use_eager_fpu() x86/fpu: Use task_disable_lazy_fpu_restore() helper x86/fpu: Use an explicit if/else in switch_fpu_prepare() x86/fpu: Introduce task_disable_lazy_fpu_restore() helper x86/fpu: Move lazy restore functions up a few lines x86/fpu: Change math_error() to use unlazy_fpu(), kill (now) unused save_init_fpu() x86/fpu: Don't do __thread_fpu_end() if use_eager_fpu() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 debug changes from Ingo Molnar: "Stack printing fixlets" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kernel: Use kstack_end() in dumpstack_64.c x86/kernel: Fix output of show_stack_log_lvl()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cacheinfo sysfs changes from Ingo Molnar: "This tree converts the x86 cacheinfo sysfs code to use the generic code in drivers/base/cacheinfo.c. It's not intended to change the sysfs ABI: 'This patch neither alters any existing sysfs entries nor their formating, however since the generic cacheinfo has switched to use the device attributes instead of the traditional raw kobjects, a directory named 'power' along with its standard attributes are added similar to any other device'" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/cacheinfo: Fix cache_get_priv_group() for Intel processors x86/cacheinfo: Move cacheinfo sysfs code to generic infrastructure
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanups from Ingo Molnar: "Various cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/iommu: Fix header comments regarding standard and _FINISH macros x86/earlyprintk: Put CONFIG_PCI-only functions under the #ifdef x86: Fix up obsolete __cpu_set() function usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 build changes from Ingo Molnar: "Small cleanups and fixes" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kexec: Cleanup KEXEC_VERIFY_SIG Kconfig help text x86/build/defconfig: Enable USB_EHCI_TT_NEWSCHED=y x86/build: Fix mkcapflags.sh bash-ism x86/Kconfig: Simplify X86_UP_APIC handling x86/Kconfig: Simplify X86_IO_APIC dependencies x86/Kconfig: Avoid issuing pointless turned off entries to .config
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 boot changes from Ingo Molnar: "A number of cleanups" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Standardize strcmp() x86/boot/64: Remove pointless early_printk() message x86/boot/video: Move the 'video_segment' variable to video.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 asm changes from Ingo Molnar: "There were lots of changes in this development cycle: - over 100 separate cleanups, restructuring changes, speedups and fixes in the x86 system call, irq, trap and other entry code, part of a heroic effort to deobfuscate a decade old spaghetti asm code and its C code dependencies (Denys Vlasenko, Andy Lutomirski) - alternatives code fixes and enhancements (Borislav Petkov) - simplifications and cleanups to the compat code (Brian Gerst) - signal handling fixes and new x86 testcases (Andy Lutomirski) - various other fixes and cleanups By their nature many of these changes are risky - we tried to test them well on many different x86 systems (there are no known regressions), and they are split up finely to help bisection - but there's still a fair bit of residual risk left so caveat emptor" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (148 commits) perf/x86/64: Report regs_user->ax too in get_regs_user() perf/x86/64: Simplify regs_user->abi setting code in get_regs_user() perf/x86/64: Do report user_regs->cx while we are in syscall, in get_regs_user() perf/x86/64: Do not guess user_regs->cs, ss, sp in get_regs_user() x86/asm/entry/32: Tidy up JNZ instructions after TESTs x86/asm/entry/64: Reduce padding in execve stubs x86/asm/entry/64: Remove GET_THREAD_INFO() in ret_from_fork x86/asm/entry/64: Simplify jumps in ret_from_fork x86/asm/entry/64: Remove a redundant jump x86/asm/entry/64: Optimize [v]fork/clone stubs x86/asm/entry: Zero EXTRA_REGS for stub32_execve() too x86/asm/entry/64: Move stub_x32_execvecloser() to stub_execveat() x86/asm/entry/64: Use common code for rt_sigreturn() epilogue x86/asm/entry/64: Add forgotten CFI annotation x86/asm/entry/irq: Simplify interrupt dispatch table (IDT) layout x86/asm/entry/64: Move opportunistic sysret code to syscall code path x86, selftests: Add sigreturn selftest x86/alternatives: Guard NOPs optimization x86/asm/entry: Clear EXTRA_REGS for all executable formats x86/signal: Remove pax argument from restore_sigcontext ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 apic changes from Ingo Molnar: "Changes: - SGI UV APIC driver updates - dead code removal" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/uv: Update the UV APIC HUB check x86/apic/uv: Update the UV APIC driver check x86/apic/uv: Update the APIC UV OEM check x86/apic: Remove verify_local_APIC()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer updates from Ingo Molnar: "The main changes in this cycle were: - clockevents state machine cleanups and enhancements (Viresh Kumar) - clockevents broadcast notifier horror to state machine conversion and related cleanups (Thomas Gleixner, Rafael J Wysocki) - clocksource and timekeeping core updates (John Stultz) - clocksource driver updates and fixes (Ben Dooks, Dmitry Osipenko, Hans de Goede, Laurent Pinchart, Maxime Ripard, Xunlei Pang) - y2038 fixes (Xunlei Pang, John Stultz) - NMI-safe ktime_get_raw_fast() and general refactoring of the clock code, in preparation to perf's per event clock ID support (Peter Zijlstra) - generic sched/clock fixes, optimizations and cleanups (Daniel Thompson) - clockevents cpu_down() race fix (Preeti U Murthy)" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits) timers/PM: Drop unnecessary braces from tick_freeze() timers/PM: Fix up tick_unfreeze() timekeeping: Get rid of stale comment clockevents: Cleanup dead cpu explicitely clockevents: Make tick handover explicit clockevents: Remove broadcast oneshot control leftovers sched/idle: Use explicit broadcast oneshot control function ARM: Tegra: Use explicit broadcast oneshot control function ARM: OMAP: Use explicit broadcast oneshot control function intel_idle: Use explicit broadcast oneshot control function ACPI/idle: Use explicit broadcast control function ACPI/PAD: Use explicit broadcast oneshot control function x86/amd/idle, clockevents: Use explicit broadcast oneshot control functions clockevents: Provide explicit broadcast oneshot control functions clockevents: Remove the broadcast control leftovers ARM: OMAP: Use explicit broadcast control function intel_idle: Use explicit broadcast control function cpuidle: Use explicit broadcast control function ACPI/processor: Use explicit broadcast control function ACPI/PAD: Use explicit broadcast control function ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler changes from Ingo Molnar: "Major changes: - Reworked CPU capacity code, for better SMP load balancing on systems with assymetric CPUs. (Vincent Guittot, Morten Rasmussen) - Reworked RT task SMP balancing to be push based instead of pull based, to reduce latencies on large CPU count systems. (Steven Rostedt) - SCHED_DEADLINE support updates and fixes. (Juri Lelli) - SCHED_DEADLINE task migration support during CPU hotplug. (Wanpeng Li) - x86 mwait-idle optimizations and fixes. (Mike Galbraith, Len Brown) - sched/numa improvements. (Rik van Riel) - various cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) sched/core: Drop debugging leftover trace_printk call sched/deadline: Support DL task migration during CPU hotplug sched/core: Check for available DL bandwidth in cpuset_cpu_inactive() sched/deadline: Always enqueue on previous rq when dl_task_timer() fires sched/core: Remove unused argument from init_[rt|dl]_rq() sched/deadline: Fix rt runtime corruption when dl fails its global constraints sched/deadline: Avoid a superfluous check sched: Improve load balancing in the presence of idle CPUs sched: Optimize freq invariant accounting sched: Move CFS tasks to CPUs with higher capacity sched: Add SD_PREFER_SIBLING for SMT level sched: Remove unused struct sched_group_capacity::capacity_orig sched: Replace capacity_factor by usage sched: Calculate CPU's usage statistic and put it into struct sg_lb_stats::group_usage sched: Add struct rq::cpu_capacity_orig sched: Make scale_rt invariant with frequency sched: Make sched entity usage tracking scale-invariant sched: Remove frequency scaling from cpu_capacity sched: Track group sched_entity usage contributions sched: Add sched_avg::utilization_avg_contrib ...
-