- 13 10月, 2007 22 次提交
-
-
由 Eddie Dong 提交于
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
We need to check for signals inside the critical section, otherwise a signal can be sent which we will not notice. Also move the check before entry, so that if the signal happens before the first entry, we exit immediately instead of waiting for something to happen to the guest. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
Split kvm_setup_pio() into two functions, one to setup in/out pio (kvm_emulate_pio()) and one to setup ins/outs pio (kvm_emulate_pio_string()). Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
Both vmx and svm decode the I/O instructions, and both botch the job, requiring the instruction prefixes to be fetched in order to completely decode the instruction. So, if we see a string I/O instruction, use the x86 emulator to decode it, as it already has all the prefix decoding machinery. This patch defines ins/outs opcodes in x86_emulate.c and calls emulate_instruction() from io_interception() (svm.c) and from handle_io() (vmx.c). It removes all vmx/svm prefix instruction decoders (get_addr_size(), io_get_override(), io_address(), get_io_count()) Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
We use kfree in svm.c and vmx.c, and this works, but it could break at any time. kfree() is supposed to match up with kmalloc(). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
All guest-invokable printks should be ratelimited to prevent malicious guests from flooding logs. This is a start. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
set_msr_interception() is used by svm to set up which MSRs should be intercepted. It can only fail if someone has changed the code to try to intercept an MSR without updating the array of ranges. The return value is ignored anyway: it should just BUG() if it doesn't work. (A build-time failure would be better, but that's tricky). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Yang, Sheng 提交于
All the physical CPUs on the board should support the same VMX feature set. Add check_processor_compatibility to kvm_arch_ops for the consistency check. Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Now we use a kmem cache for allocating vcpus, we can get the 16-byte alignment required by fxsave & fxrstor instructions, and avoid manually aligning the buffer. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Avi wants the allocations of vcpus centralized again. The easiest way is to add a "size" arg to kvm_init_arch, and expose the thus-prepared cache to the modules. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
... in favor of the more general emulator_{read,write}_*. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Changes some svm.c internal function names: 1) io_adress -> io_address (de-germanify the spelling) 2) kvm_reput_irq -> reput_irq (it's not a generic kvm function) 3) kvm_do_inject_irq -> (it's not a generic kvm function) Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
container_of is wonderful, but not casting at all is better. This patch changes svm.c's internal functions to pass "struct vcpu_svm" instead of "struct kvm_vcpu" and using container_of. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
There are several places where hardcoded numbers are used in place of the easily-available constant, which is poor form. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Shaohua Li 提交于
This allows the kvm mmu to perform sleepy operations, such as memory allocation. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Current kvm disables preemption while the new virtualization registers are in use. This of course is not very good for latency sensitive workloads (one use of virtualization is to offload user interface and other latency insensitive stuff to a container, so that it is easier to analyze the remaining workload). This patch re-enables preemption for kvm; preemption is now only disabled when switching the registers in and out, and during the switch to guest mode and back. Contains fixes from Shaohua Li <shaohua.li@intel.com>. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
This patch converts the vcpus array in "struct kvm" to a pointer array, and changes the "vcpu_create" and "vcpu_setup" hooks into one "vcpu_create" call which does the allocation and initialization of the vcpu (calling back into the kvm_vcpu_init core helper). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Gregory Haskins 提交于
struct kvm_vcpu has vmx-specific members; remove them to a private structure. Signed-off-by: NGregory Haskins <ghaskins@novell.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jeff Dike 提交于
Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
On this machine (Intel), writing to the CR4 bits 0x00000800 and 0x00001000 cause a GPF. The Intel manual is a little unclear, but AFIACT they're reserved, too. Also fix spelling of CR4_RESEVED_BITS. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
The kernel now has asm/cpu-features.h: use those macros instead of inventing our own. Also spell out definition of CR0_RESEVED_BITS (no code change) and fix typo. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Qing He 提交于
This patch adds a `vcpu_id' field in `struct vcpu', so we can differentiate BSP and APs without pointer comparison or arithmetic. Signed-off-by: NQing He <qing.he@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 16 7月, 2007 8 次提交
-
-
由 Avi Kivity 提交于
Remove unnecessary ones, and rearange the remaining in the standard order. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Joerg Roedel 提交于
This patch adds an implementation to the svm is_disabled function to detect reliably if the BIOS disabled the SVM feature in the CPU. This fixes the issues with kernel panics when loading the kvm-amd module on machines where SVM is available but disabled. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Needs to be set on vcpu 0 only. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Shani Moideen 提交于
Signed-off-by: NShani Moideen <shani.moideen@wipro.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
When a vcpu causes a shadow tlb entry to have reduced permissions, it must also clear the tlb on remote vcpus. We do that by: - setting a bit on the vcpu that requests a tlb flush before the next entry - if the vcpu is currently executing, we send an ipi to make sure it exits before we continue Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Will soon have a thid user. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Switch guest paging context may require us to allocate memory, which might fail. Instead of wiring up error paths everywhere, make context switching lazy and actually do the switch before the next guest entry, where we can return an error if allocation fails. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Anthony Liguori 提交于
The PC debug port is used for IO delay and does not require emulation. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 22 5月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 5月, 2007 9 次提交
-
-
由 Anthony Liguori 提交于
We only have to save/restore MSR_GS_BASE on every VMEXIT. The rest can be saved/restored when we leave the VCPU. Since we don't emulate the DEBUGCTL MSRs and the guest cannot write to them, we don't have to worry about saving/restoring them at all. This shaves a whopping 40% off raw vmexit costs on AMD. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Anthony Liguori 提交于
Set all of the host mask bits for CR0 so that we can maintain a proper shadow of CR0. This exposes CR0.TS, paving the way for lazy fpu handling. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Anthony Liguori 提交于
Avoid saving and restoring the guest fpu state on every exit. This shaves ~100 cycles off the guest/host switch. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Make the exit statistics per-vcpu instead of global. This gives a 3.5% boost when running one virtual machine per core on my two socket dual core (4 cores total) machine. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Noted by Joerg Roedel. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Joerg Roedel 提交于
This patch enables the virtualization of the last branch record MSRs on SVM if this feature is available in hardware. It also introduces a small and simple check feature for specific SVM extensions. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Michal Piotrowski 提交于
Remove unused function CC drivers/kvm/svm.o drivers/kvm/svm.c:207: warning: ‘inject_db’ defined but not used Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
When a vcpu is migrated from one cpu to another, its timestamp counter may lose its monotonic property if the host has unsynced timestamp counters. This can confuse the guest, sometimes to the point of refusing to boot. As the rdtsc instruction is rather fast on AMD processors (7-10 cycles), we can simply record the last host tsc when we drop the cpu, and adjust the vcpu tsc offset when we detect that we've migrated to a different cpu. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-