- 15 12月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
-
由 David Henningsson 提交于
Several people with this chipset have reported inconsistent/sloppy values for position reporting when the DMA position buffer is used, and that setting position_fix=1 have fixed their problems. BugLink: https://bugs.launchpad.net/bugs/825709Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 12月, 2011 1 次提交
-
-
Some HP laptop models do not have a properly filled OEM string used to set the gpio and polarity of the mute led. Make the mute led configuration work for this case. Signed-off-by: NGustavo Maciel Dias Vieira <gustavo@sagui.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 12月, 2011 3 次提交
-
-
由 David Henningsson 提交于
For the Asus 1101HA, reporting position by reading the DMA position buffer map seems unstable and often wrong. The reporter says that position_fix=LPIB works much better (although not 100%, but this is probably due to other issues). The controller chip is an Intel Poulsbo 8086:811b (rev 07) controller, and complete alsa-info is available here: https://launchpadlibrarian.net/86691768/alsa-info.txt.1TNwyE5Ea7 Cc: stable@kernel.org (3.0+) BugLink: http://bugs.launchpad.net/bugs/825709 Tested-by: Stefano Lodi Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jonathan Neuschäfer 提交于
Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 12月, 2011 3 次提交
-
-
由 Lothar Waßmann 提交于
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lothar Waßmann 提交于
The sound driver refuses to load as module, because of the missing MODULE_LICENSE("GPL"). The file header indicates that the driver is indeed published under the GPL. Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Record the clock after the divider as that is what all SYSCLK users see. Without this the other clock configuration in the device comes out at half rate. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 08 12月, 2011 5 次提交
-
-
由 Takashi Iwai 提交于
When there are the same or more number of HP pins are available, HP pins are used as the primary outputs instead of the speaker pins. But, in some cases (especially with ALC663 & co), some DACs are available only with a later pin and it's assigned to a speaker, and since the driver parses the pins from the lower NID, such a DAC was skipped eventually without assignments. This resulted in a regression, the missing speaker volume control in the new parser. As a workaround for this, now the driver retries the pin->DAC mapping again after restoring the speaker-pins as primary. This is still an ad hoc fix, but it works so far for most of Realtek codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
On systems with two speaker pins, the secondary speaker pin is mostly assigned to a bass speaker instead of a surround. Thus it makes more sense to rename the control properly. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The multiple headphone or speaker pins are usually provided to output the same stream unlike line-out jacks (which are supposed to be multi-channel surrounds). Thus giving a mixer name like "Headphone Surround" is rather confusing. Instead, when multiple headphone volumes are available, use index with the same "Headphone" name. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Axel Lin 提交于
Include linux/module.h to fix below build error: CC sound/soc/samsung/smdk2443_wm9710.o sound/soc/samsung/smdk2443_wm9710.c:64: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk2443_wm9710.c:64: warning: data definition has no type or storage class sound/soc/samsung/smdk2443_wm9710.c:64: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' sound/soc/samsung/smdk2443_wm9710.c:64: warning: function declaration isn't a prototype sound/soc/samsung/smdk2443_wm9710.c:65: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk2443_wm9710.c:65: warning: data definition has no type or storage class sound/soc/samsung/smdk2443_wm9710.c:65: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' sound/soc/samsung/smdk2443_wm9710.c:65: warning: function declaration isn't a prototype sound/soc/samsung/smdk2443_wm9710.c:66: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk2443_wm9710.c:66: warning: data definition has no type or storage class sound/soc/samsung/smdk2443_wm9710.c:66: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' sound/soc/samsung/smdk2443_wm9710.c:66: warning: function declaration isn't a prototype make[3]: *** [sound/soc/samsung/smdk2443_wm9710.o] Error 1 make[2]: *** [sound/soc/samsung] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Fix a typo in jive_wm8750 that introduces below build error. Also removes an unused err variable. CC sound/soc/samsung/jive_wm8750.o sound/soc/samsung/jive_wm8750.c: In function 'jive_wm8750_init': sound/soc/samsung/jive_wm8750.c:104: warning: unused variable 'err' sound/soc/samsung/jive_wm8750.c: At top level: sound/soc/samsung/jive_wm8750.c:134: error: unknown field 'dapm_widgtets' specified in initializer sound/soc/samsung/jive_wm8750.c:134: warning: initialization from incompatible pointer type make[3]: *** [sound/soc/samsung/jive_wm8750.o] Error 1 make[2]: *** [sound/soc/samsung] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 12月, 2011 8 次提交
-
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Some HP laptops with IDT 92HD75 codecs may use a GPIO > 4 for the mute LED, but currently the driver doesn't check this properly, and confuses the mute LED behavior. This ended up with the silent output on some HP laptops due to having another GPIO used as external amp control. This patch fixes the problem by checking the max GPIO count and comparing with the given value from DMI entry instead of magic fixed value 4 and 8, and adding a new field to indicate the VREF mute-LED behavior. Reported-and-tested-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Cc: <stable@kernel.org> [v3.1] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Axel Lin 提交于
Currently SND_SOC_JZ4740_CODEC depends on SOC_JZ4740 but SOC_JZ4740 is not defined in any Kconfig. Thus the codec driver will not be built when select "Build all ASoC CODEC drivers". (Unless it is selected by SND_JZ4740_SOC_QI_LB60). Remove the dependency with SOC_JZ4740, then this code driver can be built when select "Build all ASoC CODEC drivers". Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Include linux/io.h to fix below build errors: CC sound/soc/codecs/jz4740.o sound/soc/codecs/jz4740.c: In function 'jz4740_codec_read': sound/soc/codecs/jz4740.c:82: error: implicit declaration of function 'readl' sound/soc/codecs/jz4740.c: In function 'jz4740_codec_write': sound/soc/codecs/jz4740.c:92: error: implicit declaration of function 'writel' sound/soc/codecs/jz4740.c: In function 'jz4740_codec_probe': sound/soc/codecs/jz4740.c:373: error: implicit declaration of function 'ioremap' sound/soc/codecs/jz4740.c:373: warning: assignment makes pointer from integer without a cast sound/soc/codecs/jz4740.c:393: error: implicit declaration of function 'iounmap' make[3]: *** [sound/soc/codecs/jz4740.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Allow userspace applications to do more parameter setting by providing a more complete stub DMA driver specifying a wildcard set of formats and channels and essentially random values for the DMA parameters. This is required for useful runtime operation of the dummy DMA driver until we are able to figure out how to power up links and do hw_params() from DAPM. Sending to stable as without this the dummy driver is not terribly useful. Reported-by: NKyung-Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.com> Tested-by: NKyung-Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Mark Brown 提交于
They're not currently actively worked on, the hardware being rather obsolete by now. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 12月, 2011 3 次提交
-
-
由 Axel Lin 提交于
SND_SOC_MX27VIS_AIC32X4 selects SND_SOC_TLV320AIC32X4, but SND_SOC_TLV320AIC32X4 needs CONFIG_I2C. So we need to make SND_SOC_MX27VIS_AIC32X4 depend on I2C. otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/tlv320aic32x4.o sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_read': sound/soc/codecs/tlv320aic32x4.c:323: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_probe': sound/soc/codecs/tlv320aic32x4.c:641: error: 'i2c_master_send' undeclared (first use in this function) sound/soc/codecs/tlv320aic32x4.c:641: error: (Each undeclared identifier is reported only once sound/soc/codecs/tlv320aic32x4.c:641: error: for each function it appears in.) sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_modinit': sound/soc/codecs/tlv320aic32x4.c:763: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_exit': sound/soc/codecs/tlv320aic32x4.c:774: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/tlv320aic32x4.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
SND_SOC_RAUMFELD selects SND_SOC_CS4270 which needs CONFIG_I2C, and also selects SND_SOC_AK4104 which needs SPI_MASTER. Thus make SND_SOC_RAUMFELD depend on I2C && SPI_MASTER. Add depend on SPI_MASTER to fix below build error if CONFIG_SPI_MASTER is not selected. LD .tmp_vmlinux1 sound/built-in.o: In function `ak4104_spi_write': last.c:(.text+0x290cc): undefined reference to `spi_sync' sound/built-in.o: In function `ak4104_probe': last.c:(.text+0x292a0): undefined reference to `spi_write_then_read' sound/built-in.o: In function `ak4104_spi_probe': last.c:(.text+0x29398): undefined reference to `spi_setup' sound/built-in.o: In function `ak4104_init': last.c:(.init.text+0x4ec): undefined reference to `spi_register_driver' make: *** [.tmp_vmlinux1] Error 1 Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/cs4270.o sound/soc/codecs/cs4270.c: In function 'cs4270_i2c_probe': sound/soc/codecs/cs4270.c:657: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/cs4270.c: In function 'cs4270_init': sound/soc/codecs/cs4270.c:730: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/cs4270.c: In function 'cs4270_exit': sound/soc/codecs/cs4270.c:736: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/cs4270.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 SND_PXA2XX_SOC_HX4700 selects SND_SOC_AK4641 which needs CONFIG_I2C. Thus make SND_PXA2XX_SOC_HX4700 depend on I2C. Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/ak4641.o sound/soc/codecs/ak4641.c: In function 'ak4641_modinit': sound/soc/codecs/ak4641.c:646: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/ak4641.c: In function 'ak4641_exit': sound/soc/codecs/ak4641.c:656: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/ak4641.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Return proper error for uda1380_modinit if i2c_add_driver() fails. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 12月, 2011 2 次提交
-
-
由 Axel Lin 提交于
SND_KIRKWOOD_SOC_T5325 selects SND_SOC_ALC5623, but SND_SOC_ALC5623 needs CONFIG_I2C. So we need to make SND_KIRKWOOD_SOC_T5325 depend on I2C, otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/alc5623.o sound/soc/codecs/alc5623.c: In function 'alc5623_i2c_probe': sound/soc/codecs/alc5623.c:1002: error: implicit declaration of function 'i2c_smbus_read_word_data' sound/soc/codecs/alc5623.c:1009: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/alc5623.c: In function 'alc5623_modinit': sound/soc/codecs/alc5623.c:1096: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/alc5623.c: In function 'alc5623_modexit': sound/soc/codecs/alc5623.c:1108: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/alc5623.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Also fix the same issue for SND_KIRKWOOD_SOC_OPENRD. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Since they don't actually have power bits but do have events associated with them it's important that we bootstrap their state properly which making them virtual does. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 02 12月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
When no imux is available (e.g. a single capture source), alc_auto_init_input_src() may trigger an Oops due to the access to -1. Add a proper zero-check to avoid it. Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Dillow 提交于
There are some AC97 codec and board combinations that have been observed to take a very long time to respond after the cold reset has completed. In one case, more than 350 ms was required. To allow users to have sound on those platforms, we'll wait up to 500ms for the codec to become ready. As a board may have multiple codecs, with some faster than others to reset, we add a module parameter to inform the driver which codecs should be present. Reported-by: NKotCzarny <tjosko@yahoo.com> Signed-off-by: NDavid Dillow <dave@thedillows.org> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 12月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
-
由 Charles Chin 提交于
The verb command in stac92xx_post_suspend caused the audio to stop working after resuming from S3 mode on HP laptops with the VREF-pin mute-LED control. Removing relevant post_suspend registering. Although removing D3 on AFG is no optimal solution, the impact should be small in comparison with the broken S3/S4. Signed-off-by: NCharles Chin <Charles.Chin@idt.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 11月, 2011 8 次提交
-
-
由 Marc Vertes 提交于
This quirk sould be reverted. It has the following probems: 1) The quirk was intended to "ASUS MV2-MX SE" motherboards only, but the ID used matches a much broader range, potentially all boards containing a VIA chipset model in the family of vendor VIA 0x1106 and audio device ID 0x3288, which encompasses VIA-VT82xx, VIA-VT1xx and VIA-VT20xx chipsets. 2) VIA chipsets rely on azx_via_get_position() to handle correctly dma transfers during capture. Using POS_FIX_LPIB instead of POS_FIX_VIACOMBO leads to partially corrupted input buffers during capture. The effects of this bug are not immediately visible, it took strong DSP expertise, some expensive signal generator and a spectrum analyzer to identify it and verify correct behaviour using original default. 3) It's almost certain that the quirk did not fix the real problem, if there was one. Refer to original submission: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-February/025109.htmlSigned-of-by: NMarc Vertes <mvertes@sigfox.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Some HP laptops use a pin VREF for controlling the mute LED, and such a pin shouldn't be powered off. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lars-Peter Clausen 提交于
Currently the SigmaDSP firmware loader only works correctly on little-endian systems. Fix this by using the proper endianess conversion functions. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Lars-Peter Clausen 提交于
The firmware header is not part of the CRC, so skip it. Otherwise the firmware will be rejected due to non-matching CRCs. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Lars-Peter Clausen 提交于
The SigmaDSP firmware loader currently does not perform enough boundary size checks when processing the firmware. As a result it is possible that a malformed firmware can cause an out of bounds memory access. This patch adds checks which ensure that both the action header and the payload are completely inside the firmware data boundaries before processing them. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 John F Leach 提交于
Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon Roland SH-201 table entry as template. USB MIDI and audio was tested with Muse and Audacity. Signed-off-by: NJohn F Leach <jfleach@jfleach.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
Based on initial data. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 11月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
-